JoVE Logo

Oturum Aç

Chapter 10

Elasticity, Creep, and Shrinkage in Concrete

Betonda Elastikiyet
Betonda Elastikiyet
When a concrete specimen is subjected to moderate or high magnitude uniaxial compressive or tensile stresses,  the resulting strain varies ...
Betonun dinamik elastikiyet modülü
Betonun dinamik elastikiyet modülü
Stress analysis in concrete structures prone to dynamic and impact loading employs the dynamic modulus, which is greater than the static modulus of ...
Betonda Sürünme
Betonda Sürünme
When a loaded concrete member is subjected to constant stress that is sustained over time, the strain in the member increases, resulting in its ...
Sürünmeyi Etkileyen Faktörler
Sürünmeyi Etkileyen Faktörler
In concrete mixes, the hardened cement paste primarily contributes to creep, while the aggregates in the mix restrain creep. Aggregates with a high ...
Sürünmenin Etkileri
Sürünmenin Etkileri
Reinforced concrete beams subjected to creep undergo increased deflection. This may result in further bending of the beam, widening existing cracks, and ...
Betonda Büzülme
Betonda Büzülme
The loss of water or chemical reactions reduces the concrete's volume, a process known as shrinkage.  Practically, shrinkage in concrete is ...
Kurutma Büzülmesi
Kurutma Büzülmesi
When hardened concrete is exposed to unsaturated air, the free water present in its capillaries evaporates out of the pores. This causes the movement of ...
Karbonatlaşma Büzülmesi
Karbonatlaşma Büzülmesi
In the presence of moisture, atmospheric carbon dioxide entering the concrete surface transforms into carbonic acid, which chemically reacts with the ...
Betonda Yapısal Olmayan Çatlak Çeşitleri
Betonda Yapısal Olmayan Çatlak Çeşitleri
After placing concrete, water may rise to the top of the mix, settling the aggregates. If reinforcements within the concrete obstruct this natural ...
Kütle Betonlama
Kütle Betonlama
When large volumes of concrete are placed, if the temperature of the concrete on the surface and the interior region is different, thermal cracks may ...
Sıcak Hava Betonlama
Sıcak Hava Betonlama
In dry and hot conditions, placing fresh concrete at high temperatures accelerates the setting and leads to rapid evaporation of water from the concrete, ...
Soğuk Hava Beton Dökümü
Soğuk Hava Beton Dökümü
During cold weather, when freshly placed concrete starts to freeze before it sets, the water in the concrete converts to ice, resulting in its expansion. ...
JoVE Logo

Gizlilik

Kullanım Şartları

İlkeler

Araştırma

Eğitim

JoVE Hakkında

Telif Hakkı © 2020 MyJove Corporation. Tüm hakları saklıdır