The authors have no acknowledgements.

Sıralı ilavesi yoluyla CMP İnce Filmlerin 1. Sentezi <ol><li> Mika altın Kendinden montajlı tek tabaka (SAM) işlevsellik. <ol><li> Etanol 11-tioasetil-undekan asit-propargyl amid 14 1 mM çözeltisi (SAM-çözüm) hazırlayın. Çözelti berrak olana kadar ultrasonik banyo kullanarak karıştırın. Alüminyum folyo kullanarak ışık şişeyi koruyun. </li><li> Argon altında, altın kaplı mika gofret elde edilir. Depolama kabından çekilmesinden sonra 18 saat boyunca SAM-çözümün doğrudan mika gofret batırmayın. </li><li> SAM-çözümün dışında hazırlanan Au-mika gofret alın azot akımı altında etanol ve kuru ile durulayın. Daha sonra ışık ve inert gaz altında korunan substrat saklayın. </li></ol></li><li> Öncü çözümleri. <ol><li> 18,64 mg Cu-katalizörün (tetrakis (asetonitril) bakır (I) &#39;in sentezi fosfat), 20,83 mg tetraphenylmethane (TPM) -alkyne ve 24,22 mg TPM azid tartılır ve ayrı bir Schlenk şişesi içine, her bir bileşen doldurun.TPM alkin ve TPM azid için bakınız Şekil 1., sentez Başvurusu 15 tarif edilmiştir. Boşaltın ve inert gaz (N2 veya argon) ile 3 kez doldurun. </li><li> Her bir Schlenk şişesine 25 ml su içermeyen tetrahidrofuran (THF) ilave edilir. Alüminyum folyo kullanarak ışık TPM azid ve TPM-alkin ile şişeler koruyun. </li></ol></li><li> CMP imalatı için aparat hazırlayın. Not: Sentez cihazı, Şekil 2 &#39;de gösterilmiştir. <ol><li> Bir 250 ml&#39;lik tek boyunlu, yuvarlak tabanlı bir şişeye kullanın. 130 mi THF içinde doldurun. Alkin ile kaplanmış hazırlanan alt tabaka koymak örnek bölmesine SAM sonlandırıldı. Alt-tabaka dik duran, böylece örnek tutucu kullanın. </li><li> Reflü soğutucusunun üstündeki kavşağında yolu ile savurma hattına cihazı bağlayın. </li><li> 3 kez boşaltın ve inert gaz ile havalandırın. </li></ol></li><li> Soy gaz koşulları altında Sıralı ek. <ol><li> 90 ° C&#39;ye kadar ısıtıcı ayarlayın ve THF yeniden olana kadar bekleyineritken. </li><li> Numune bölmesinin alt kısmındaki çıkışında üzerinde numune bölmesinden THF dışarı edelim. Çıkışını kapatın. </li><li> Hazırlanan TPM azid çözeltisi 1 ml ve septumla vidalı kapakla numune kompartımanı Cu (I) &#39;in katalizör çözeltisi 0,5 ml ver. Reaksiyon aparatı savurma şişesi çözümleri sırayla aktarmak için bir oyuk bir iğne ile bir şırınga kullanın. Not: dizisi reaksiyona herhangi bir etkisi yoktur. </li><li> Yaklaşık 30 dakika bekleyin. </li><li> Numune bölmesinin alt kısmındaki çıkışında üzerinde reaksiyon çözüm olsun. Çıkışını kapatın ve numune durulama özet THF toplamak. Yaklaşık 30 dakika bekleyin. </li><li> Numune bölmesinin alt kısmındaki çıkışında üzerinde durulama çözüm olsun. Çıkışını kapatın. </li><li> Hazırlanan TPM alkin çözeltisi 1 ml ve septumla vidalı kapakla numune kompartımanı Cu (I) &#39;in katalizör çözeltisi 0,5 ml ver. Içi boş bir şırınga kullanınİğne Reaksiyon cihazına bir Schlenk şişesi çözeltiler sıralı olarak aktarmak için kullanılır. Not: dizisi reaksiyona herhangi bir etkisi yoktur. </li><li> Yaklaşık 30 dakika bekleyin. </li><li> Numune bölmesinin alt kısmındaki çıkışında üzerinde reaksiyon çözüm olsun. Çıkışını kapatın ve numune durulama özet THF toplamak. Yaklaşık 30 dakika bekleyin. </li><li> Tekrarlayın tabakalarının istenilen miktara varıncaya kadar 1.4.9 için 1.4.3 adımlar. Not: Bir katman yaklaşık olarak 1 nm kalınlığındadır. </li><li> , CMP-kaplı mika substrat çıkarıp THF, etanol ile durulayın ve azot akımı altında kurutun. </li></ol></li></ol> CMP Nanomembranlar 2. Transferi <ol><li> Poli (metil metakrilat) (PMMA) çözeltisi eklendi. <ol><li> Etil asetat içinde% 4 (ağırlık) PMMA (M 996 kDa) ihtiva eden bir çözelti hazırlayın. Çözelti berrak olana kadar PMMA ultrasonik banyo kullanarak eritin. </li></ol></li><li> PMMA çözümünün Spin kaplama. <ol><li> Ra spin kaplayıcı ayarlamp süresi 0 rpm 4000 ila 10 saniye, saat 40 sn tutup 4,000 0 rpm zamanı 10 sn rampa. </li><li> Spin kaplayıcı CMP kaplı mika substrat yerleştirin ve tamamen kaplıdır kadar gofret PMMA çözümünü koydu. Spin kaplayıcı başlatın. </li><li> Döndürerek kaplama tamamlandıktan sonra, 90 ° C&#39;de bir ısıtma plakası üzerinde 5 dakika boyunca numune koydu. </li><li> Kaplanmış mika substrat her kenarından 1 mm kesti. Kenarları kesmek için bir makas kullanın. </li></ol></li><li> PMMA Devri CMP nanomembrane kaplı. <ol><li> Ve KI / H2O (1:10 a / a) I 2 / KI / H 2 solüsyonu O (: 4 40 a / a / a 1) hazırlayın. </li><li> Çanak kristalleştirilmesi 150 ml I2 / KI H2O çözeltisi doldurun ve çanak kristalleştirilmesi 100 ml KI / H2O çözeltisi doldurun. I 2 / KI / H2O çözeltisi üzerine, çözeltiye temas mika, mika alt tabaka üzerine kaplanmış PMMA CMP altın koyun. O lavabo olmadığını dikkatli olun.En az 5 dakika bekleyin. </li><li> I 2 / KI / H2 çözeltisine temas mika KI / H2O çözeltisi üzerine solüsyon, PMMA kaplı CMP altın mika alt-tabakanın koyun. O lavabo olmadığını dikkatli olun. En az 5 dakika bekleyin. </li><li> Çanak kristalleştirilmesi 250 ml damıtılmış su doldurun. Mika gelen PMMA / CMP / altın filmi atacakmısınız. Hafif damıtılmış su içinde, bir kenarından başlayarak, alt-tabakanın içine daldırılması yapın. Mika suya bakacak şekilde alt tabakayı tutun. Not: süreci Şekil 3 &#39;de gösterilmiştir. </li><li> Dip kat silikon gofret PMMA / CMP / altın. O yüzme PMMA / CMP / altın zarın kenarına temas edene kadar gofret ile yavaş yavaş PMMA / CMP / altın yaklaşarak bunu yapın. Si-gofret PMMA / CMP / altın zar ile temas halinde olduğu zamanlar, yavaş yavaş silikon gofret çekin. </li><li> Silikon gofret PMMA / CMP / altın filmi atacakmısınız. Biraz tek ed itibaren, alt tabakayı daldırarak yapınge, I 2 / KI / H 2 O çözüm. 15 dakika bekleyin. </li><li> Altın tamamen kazınmış sonra silikon vasıtasıyla suya PMMA / CMP zarı aktarın. 15 dakika bekleyin. </li><li> Üç kez adımı yineleyin 2.3.7 suyla membran yıkayın. </li><li> Aşama 2.3.5 belirtilen yöntemle, istenen alt-tabaka, örneğin, bir mikroskop lamı veya altın kaplama silikon yıkanarak PMMA / CMP membran aktarın. En az 2 saat süreyle havada PMMA / CMP substrat kurumasını bekleyin. </li></ol></li><li> PMMA Feshi. <ol><li> Aseton PMMA / CMP substratı koyun. 30 dakika bekleyin. Substrat çıkarın ve aseton ile durulayın. </li><li> Adımı yineleyin 2.4.1 üç kez. </li><li> En az 2 saat CMP substrat kurumasını bekleyin. </li></ol></li></ol>

<ol>
	<li>Lindemann, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+Freestanding+Conjugated+Microporous+Polymer+Nanomembranes+for+Gas+Separation.">Preparation of Freestanding Conjugated Microporous Polymer Nanomembranes for Gas Separation.</a> Chemistry of Materials. 26 (24), 7193-71 (2014).</li><li>Kim, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+Ultrathin+Films+of+Molecular+Networks+through+Layer-by-Layer+Cross-Linking+Polymerization+of+Tetrafunctional+Monomers.">Preparation of Ultrathin Films of Molecular Networks through Layer-by-Layer Cross-Linking Polymerization of Tetrafunctional Monomers.</a> Macromolecules. 44 (18), 7092-7095 (2011).</li><li>Vonh&#246;ren, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultrafast+Layer-by-Layer+Assembly+of+Thin+Organic+Films+Based+on+Triazolinedione+Click+Chemistry.">Ultrafast Layer-by-Layer Assembly of Thin Organic Films Based on Triazolinedione Click Chemistry.</a> ACS Macro Letters. 4 (3), 331-334 (2015).</li><li>Shekhah, O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Step-by-Step+Route+for+the+Synthesis+of+Metal&#8722;Organic+Frameworks.">Step-by-Step Route for the Synthesis of Metal&#8722;Organic Frameworks.</a> Journal of the American Chemical Society. 129 (49), 15118-15119 (2007).</li><li>Shekhah, O., Wang, H., Zacher, D., Fischer, R. A., W&#246;ll, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Growth+Mechanism+of+Metal&#8211;Organic+Frameworks:+Insights+into+the+Nucleation+by+Employing+a+Step-by-Step+Route.">Growth Mechanism of Metal&#8211;Organic Frameworks: Insights into the Nucleation by Employing a Step-by-Step Route.</a> Angewandte Chemie International Edition. 48 (27), 5038-5041 (2009).</li><li>Shekhah, O., Liu, J., Fischer, R. A., W&#246;ll, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MOF+thin+films:+existing+and+future+applications.">MOF thin films: existing and future applications.</a> Chemical Society Reviews. 40 (2), 1081-1106 (2011).</li><li>Liu, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deposition+of+Metal-Organic+Frameworks+by+Liquid-Phase+Epitaxy:+The+Influence+of+Substrate+Functional+Group+Density+on+Film+Orientation.">Deposition of Metal-Organic Frameworks by Liquid-Phase Epitaxy: The Influence of Substrate Functional Group Density on Film Orientation.</a> Materials. 5 (9), 1581-1592 (2012).</li><li>Such, G. K., Quinn, J. F., Quinn, A., Tjipto, E., Caruso, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assembly+of+Ultrathin+Polymer+Multilayer+Films+by+Click+Chemistry.">Assembly of Ultrathin Polymer Multilayer Films by Click Chemistry.</a> Journal of the American Chemical Society. 128 (29), 9318-9319 (2006).</li><li>Ai, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Carbon+Nanomembranes+(CNMs)+Supported+by+Polymer:+Mechanics+and+Gas+Permeation.">Carbon Nanomembranes (CNMs) Supported by Polymer: Mechanics and Gas Permeation.</a> Advanced Materials. 26 (21), 3421-3426 (2014).</li><li>Jiang, J. -. X., Cooper, A. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=in+Functional+Metal-Organic+Frameworks:+Gas+Storage,+Separation+and+Catalysis.">in Functional Metal-Organic Frameworks: Gas Storage, Separation and Catalysis.</a> Topics in Current Chemistry. (ed Martin Schr&#246;der) Ch. 293, 1-33 (2010).</li><li>Dawson, R., Cooper, A. I., Adams, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoporous+organic+polymer+networks.">Nanoporous organic polymer networks.</a> Progress in Polymer Science. 37 (4), 530-563 (2012).</li><li>Muller, T., Br&#228;se, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Click+Chemistry+Finds+Its+Way+into+Covalent+Porous+Organic+Materials.">Click Chemistry Finds Its Way into Covalent Porous Organic Materials.</a> Angewandte Chemie International Edition. 50 (50), 11844-11845 (2011).</li><li>Tsotsalas, M., Addicoat, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Covalently+linked+organic+networks.">Covalently linked organic networks.</a> Frontiers in Materials. 2, (2015).</li><li>Kleinert, M., Winkler, T., Terfort, A., Lindhorst, T. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+modular+approach+for+the+construction+and+modification+of+glyco-SAMs+utilizing+1,3-dipolar+cycloaddition.">A modular approach for the construction and modification of glyco-SAMs utilizing 1,3-dipolar cycloaddition.</a> Organic &amp; Biomolecular Chemistry. 6 (12), 2118-2132 (2008).</li><li>Plietzsch, O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Four-fold+click+reactions:+Generation+of+tetrahedral+methane-+and+adamantane-based+building+blocks+for+higher-order+molecular+assemblies.">Four-fold click reactions: Generation of tetrahedral methane- and adamantane-based building blocks for higher-order molecular assemblies.</a> Organic &amp; Biomolecular Chemistry. 7, (2009).</li><li>Greenler, R. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Infrared+Study+of+Adsorbed+Molecules+on+Metal+Surfaces+by+Reflection+Techniques.">Infrared Study of Adsorbed Molecules on Metal Surfaces by Reflection Techniques.</a> The Journal of Chemical Physics. 44 (1), (1966).</li></ol>

The authors have nothing to disclose.

CMP-film oluşturucu sentezi için katalizör çözeltisi taze olarak yer alır. Kırık bir katalizör (örneğin, yükseltgenmiş) çözeltisinin bir mavi rengi ile gösterilir. Taze bir çözüm renksizdir. Bir önemli nokta sıkma kaplama PMMA&#39;nın sonra mika substrat kenarları kesmektir. Ayrıca alt tabaka kusurlar kesilmelidir örneğin, her spot PMMA nedeniyle eksik altın tabakası, mika alt-tabaka ile temas olabilir edildi. Aksi takdirde altın tabakası kolay...

The preparation of ultra-thin polymer membranes is of high interest for applications in gas separation and nanofiltration. Challenges in the synthesis are represented by (a) the control of the membrane thickness and the homogeneity and (b) transfer of such fragile membranes. To overcome challenge (a), molecular layer-by-layer synthesis1 has shown great promise in controlling the thickness and homogeneity of thin films grown at the solid-liquid interface.2,3 Controlling the number of layers linearly controls the film thickness. The l-b-l method has been successfully used to fabricate surface mounted metal organic frameworks (SURMOFs),4-7 also the synthesis of thin polymer films via l-b-l reaction of polymer chains was demonstrated.8 The challenge (b) concerns the handling of these ultra-thin membranes. To avoid rupture or wrinkling of the nanomembranes sacrificial supports of coatings have shown great promise. 9
Here we will present a detailed protocol for synthesis of conjugated microporous polymer (CMP)10-13 thin films through sequential addition of the molecular building blocks, with desired thickness and composition. The preparation of free-standing CMP nanomembranes is achieved by using a sacrificial support. To handle and transfer the CMP nanomembranes to other supports we will describe a simple protocol to protect the membranes with sacrificial coatings and their upfloating to the liquid air interface and subsequent transfer using dip-coating.

<table>
	<tbody>
		<tr>
			<td>Acetone</td>
			<td>VWR BDH Prolabo</td>
			<td>20066.330</td>
			<td>AnalR NORMAPUR</td>
		</tr>
		<tr>
			<td>Potassium iodide</td>
			<td>VWR BDH Prolabo</td>
			<td>26846.292</td>
			<td>AnalR NORMAPUR</td>
		</tr>
		<tr>
			<td>Ethyl acetate</td>
			<td>VWR BDH Prolabo</td>
			<td>23882.321</td>
			<td>AnalR NORMAPUR</td>
		</tr>
		<tr>
			<td>Tetrahydrofurane (THF)</td>
			<td>VWR BDH Prolabo</td>
			<td>28559.320</td>
			<td>HiPerSolv CHROMANORM</td>
		</tr>
		<tr>
			<td>THF waterfree</td>
			<td>Merck Millipore</td>
			<td>1.08107.1001</td>
			<td>SeccoSolv</td>
		</tr>
		<tr>
			<td>Iodine</td>
			<td>Sigma-Aldrich</td>
			<td>20,777-2</td>
			<td></td>
		</tr>
		<tr>
			<td>Tetrakis(acetonitrile)copper(I)hexafluoro-phosphate</td>
			<td>Sigma-Aldrich</td>
			<td>346276-5G</td>
			<td></td>
		</tr>
		<tr>
			<td>Poly(methyl methacrylate) 996 kDa (PMMA)</td>
			<td>Sigma-Aldrich</td>
			<td>182265-25G</td>
			<td></td>
		</tr>
		<tr>
			<td>1.1.1.1 Methanetetrayltetrakis(4-azidobenzene) (TPM-azide)</td>
			<td></td>
			<td></td>
			<td>provided by AK Prof. Br&#228;se. Institute of organic chemistry, Karlsruhe Institute of Technology. Synthesized according to9</td>
		</tr>
		<tr>
			<td>1.1.1.1 Methanetetrayltetrakis(4-ethinylenebenzene) (TPM-alkyne)</td>
			<td></td>
			<td></td>
			<td>provided by AK Prof. Br&#228;se. Institute of organic chemistry, Karlsruhe Institute of Technology. Synthesized according to9</td>
		</tr>
		<tr>
			<td>11-thioacetyl-undecaneacid propargylamide</td>
			<td></td>
			<td></td>
			<td>provided by AK Prof. Br&#228;se. Institute of organic chemistry, Karlsruhe Institute of Technology. Synthesized according to8</td>
		</tr>
		<tr>
			<td>gold/titan coated silicium-wafer</td>
			<td>Georg Albert PVD, 76857 Silz, Germany</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>gold coated mica</td>
			<td>Georg Albert PVD, 76857 Silz, Germany</td>
			<td></td>
			<td></td>
		</tr>
	</tbody>
</table>

layer-by-layer synthesis and transfer of freestanding conjugated microporous polymer nanomembranes

CMP gibi büyük yüzey alanlı malzemeler nedeniyle üstün termal ve kimyasal stabilite ile kombinasyon halinde işlevsel gruplar yüksek değişkenlik ve düşük seviyedeki yoğunluklara kadar, son zamanlarda ilgi giderek artan çekmiştir. Böyle sıkma kaplama gibi genellikle uygulanan teknikler mevcut olmadığından Ancak, çözünmeyen doğa kendi işlenmesinde sorunlara neden olmaktadır. Özellikle CMP ince filmlerin işleme arzu edilir membran uygulamaları için, işleme sorunları ticari uygulama engellemiştir. Burada, moleküler katman-katman (Lbl) sentez yoluyla fonksiyonalize yüzeylerde CMP ince filmlerin ara yüzey sentezini tarif eder. Bu işlem, istenen kalınlığı ve kompozisyon ve daha da arzu edilen bir bileşim eğimlere sahip filmlerin hazırlanması sağlar. Kurban desteklerin kullanımı desteği dağılmasından sonra tarafından müstakil membranların hazırlanması veriyorsentez. Böyle ultra-ince müstakil membranlar işlemek için kurban kaplamalarla koruma Nanomembranlar kopma önlemek için, büyük söz gösterdi. İstenen substrata Nanomembranlar aktarmak için, kaplanmış membranlar hava-sıvı arayüzünde upfloated ve daha sonra daldırma ile kaplama yoluyla transfer edilir.

Membranlar 16 Şekil 4, bir altın gofret transfer CMP-membran IRRA-spektrumlarını göstermektedir kızıl ötesi yansıtma absorpsiyon spektroskopisi (IRRAS). Ile karakterize edilir. Aromatik omurga titreşimlerden tipik bantlar 1605 cm -1, 1515 cm -1 ve 1412 cm -1 altındadır. Reaksiyona girmemiş alkin ve azid grupları 2125 cm -1 ve 1227 cm -1 karakteristik bantlar ile görülebilir. 5 taramalı elektron mikroskobu...

Watch this Scientific Journal Video about Layer-by-layer Synthesis and Transfer of Freestanding Conjugated Microporous Polymer Nanomembranes at JoVE.com

Layer-by-layer Synthesis and Transfer of Freestanding Conjugated Microporous Polymer Nanomembranes

In this paper we describe the interfacial synthesis of conjugated microporous polymers (CMP) on sacrificial substrates, and the dissolution of the substrate for the preparation of freestanding CMP nanomembranes. In addition, we will describe how the fragile nanomembranes can be transferred to other substrates.

Katman-katman Sentezi ve Müstakil Konjuge mikro gözenekli polimer Nanomembranlar Devri

CMP as large surface area materials have attracted growing interest recently, due to their high variability in the incorporation of functional groups in ...

layer-layer-synthesis-transfer-freestanding-conjugated-microporous

Research

JoVE Journal

Chemistry

9.3K Görüntüleme.  Karlsruhe Institute of Technology. In this paper we describe the interfacial synthesis of conjugated microporous polymers (CMP) on sacrificial substrates, and the dissolution of the substrate for the preparation of freestanding CMP nanomembranes. In addition, we will describe how the fragile nanomembranes can be transferred to other substrates.

Video: Layer-by-layer Synthesis and Transfer of Freestanding Conjugated Microporous Polymer Nanomembranes

Confocal Imaging of Confined Quiescent and Flowing Colloid-polymer Mixtures

The behavior of confined colloidal suspensions with attractive interparticle interactions is critical to the rational design of materials for directed assembly1-3, drug delivery4, improved hydrocarbon recovery5-7, and flowable electrodes for energy storage8. Suspensions containing fluorescent colloids and non-adsorbing polymers are appealing model systems, as the ratio of the polymer radius of gyration to the particle radius&#160;and concentration of polymer control the range and strength of the interparticle attraction, respectively. By tuning the polymer properties and the volume fraction of the colloids, colloid fluids, fluids of clusters, gels, crystals, and glasses can be obtained9.&#160;Confocal microscopy, a variant of fluorescence microscopy, allows an optically transparent and fluorescent sample to be imaged with high spatial and temporal resolution in three dimensions. In this technique, a small pinhole or slit blocks the emitted fluorescent light from regions of the sample that are outside the focal volume of the microscope optical system. As a result, only a thin section of the sample in the focal plane is imaged. This technique is particularly well suited to probe the structure and dynamics in dense colloidal suspensions at the single-particle scale: the particles are large enough to be resolved using visible light and diffuse slowly enough to be captured at typical scan speeds of commercial confocal systems10. Improvements in scan speeds and analysis algorithms have also enabled quantitative confocal imaging of flowing suspensions11-16,37.&#160;In this paper, we demonstrate confocal microscopy experiments to probe the confined phase behavior and flow properties of colloid-polymer mixtures. We first prepare colloid-polymer mixtures that are density- and refractive-index matched. Next, we report a standard protocol for imaging quiescent dense colloid-polymer mixtures under varying confinement in thin wedge-shaped cells. Finally, we demonstrate a protocol for imaging colloid-polymer mixtures during microchannel flow.

Confocal microscopy is used to image quiescent and flowing colloid-polymer mixtures, which are studied as model systems for attractive suspensions. Image analysis algorithms are used to calculate structural and dynamic metrics for the colloidal particles that measure changes due to geometric confinement.

Kuşatılmış Quiescent ve akan Koloidno polimer Karışımlarının Eşodaklı Görüntüleme

The behavior of confined colloidal suspensions with attractive interparticle interactions is critical to the rational design of materials for directed ...

Kimya

Fabrication of Large-area Free-standing Ultrathin Polymer Films

This procedure describes a method for the fabrication of large-area and ultrathin free-standing polymer films. Typically, ultrathin films are prepared using either sacrificial layers, which may damage the film or affect its mechanical properties, or they are made on freshly cleaved mica, a substrate that is difficult to scale. Further, the size of ultrathin film is typically limited to a few square millimeters. In this method, we modify a surface with a polyelectrolyte that alters the strength of adhesion between polymer and deposition substrate. The polyelectrolyte can be shown to remain on the wafer using spectroscopy, and a treated wafer can be used to produce multiple films, indicating that at best minimal amounts of the polyelectrolyte are added to the film. The process has thus far been shown to be limited in scalability only by the size of the coating equipment, and is expected to be readily scalable to industrial processes. In this study, the protocol for making the solutions, preparing the deposition surface, and producing the films is described.

We describe a method for the fabrication of large-area (up to 13 cm diameter) and ultrathin (as thin as 8 nm) polymer films. Instead of using a sacrificial interlayer to delaminate the film from its substrate, we use a self-limiting surface treatment suitable for arbitrarily large areas.

Geniş alanlı Fabrikasyon Ultrathin Polimer Filmler Serbest ayakta

This procedure describes a method for the fabrication of large-area and ultrathin free-standing polymer films.  Typically, ultrathin films are prepared ...

Preparation of Highly Porous Coordination Polymer Coatings on Macroporous Polymer Monoliths for Enhanced Enrichment of Phosphopeptides

We describe a protocol for the preparation of hybrid materials based on highly porous coordination polymer coatings on the internal surface of macroporous polymer monoliths. The developed approach is based on the preparation of a macroporous polymer containing carboxylic acid functional groups and the subsequent step-by-step solution-based controlled growth of a layer of a porous coordination polymer on the surface of the pores of the polymer monolith. The prepared metal-organic polymer hybrid has a high specific micropore surface area. The amount of iron(III) sites is enhanced through metal-organic coordination on the surface of the pores of the functional polymer support. The increase of metal sites is related to the number of iterations of the coating process.
The developed preparation scheme is easily adapted to a capillary column format. The functional porous polymer is prepared as a self-contained single-block porous monolith within the capillary, yielding a flow-through separation device with excellent flow permeability and modest back-pressure. The metal-organic polymer hybrid column showed excellent performance for the enrichment of phosphopeptides from digested proteins and their subsequent detection using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The presented experimental protocol is highly versatile, and can be easily implemented to different organic polymer supports and coatings with a plethora of porous coordination polymers and metal-organic frameworks for multiple purification and/or separation applications.

A procedure for the preparation of porous hybrid separation media composed of a macroporous polymer monolith internally coated by a high surface area microporous coordination polymer is presented.

Phosphopeptides Gelişmiş Zenginleştirme için Makrogözenekli Polimer Monoliths üzerinde yüksek Gözenekli Koordinasyon Polymer Coatings Hazırlanması

We describe a protocol for the preparation of hybrid materials based on highly porous coordination polymer coatings on the internal surface of macroporous ...

Photodynamic Therapy with Blended Conducting Polymer/Fullerene Nanoparticle Photosensitizers

In this article a method for the fabrication and reproducible in-vitro evaluation of conducting polymer nanoparticles blended with fullerene as the next generation photosensitizers for Photodynamic Therapy (PDT) is reported. The nanoparticles are formed by hydrophobic interaction of the semiconducting polymer MEH-PPV (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) with the fullerene PCBM (phenyl-C61-butyric acid methyl ester) in the presence of a non-compatible solvent. MEH-PPV has a high extinction coefficient that leads to high rates of triplet formation, and efficient charge and energy transfer to the fullerene PCBM. The latter processes enhance the efficiency of the PDT system through fullerene assisted triplet and radical formation, and ultrafast deactivation of MEH-PPV excited stated. The results reported here show that this nanoparticle PDT sensitizing system is highly effective and shows unexpected specificity to cancer cell lines.

This protocol describes a method for the fabrication of conducting polymer nanoparticles blended with fullerene. These nanoparticles were investigated for their potential use as a next generation photosensitizers for Photodynamic Therapy (PDT).

Karma Polimer / Fulleren Nanopartikül photosensitizers Şefliği ile Fotodinamik Tedavi

In this article a method for the fabrication and reproducible in-vitro evaluation of conducting polymer nanoparticles blended with fullerene as the next ...

The Preparation and Properties of Thermo-reversibly Cross-linked Rubber Via Diels-Alder Chemistry

A method for using Diels Alder thermo-reversible chemistry as cross-linking tool for rubber products is demonstrated. In this work, a commercial ethylene-propylene rubber, grafted with maleic anhydride, is thermo-reversibly cross-linked in two steps. The pending anhydride moieties are first modified with furfurylamine to graft furan groups to the rubber backbone. These pendant furan groups are then cross-linked with a bis-maleimide via a Diels-Alder coupling reaction. Both reactions can be performed under a broad range of experimental conditions and can easily be applied on a large scale. The material properties of the resulting Diels-Alder cross-linked rubbers are similar to a peroxide-cured ethylene/propylene/diene rubber (EPDM) reference. The cross-links break at elevated temperatures (&#62; 150 &#176;C) via the retro-Diels-Alder reaction and can be reformed by thermal annealing at lower temperatures (50-70 &#176;C). Reversibility of the system was proven with infrared spectroscopy, solubility tests and mechanical properties. Recyclability of the material was also shown in a practical way, i.e., by cutting a cross-linked sample into small parts and compression molding them into new samples displaying comparable mechanical properties, which is not possible for conventionally cross-linked rubbers.

A simple two-step approach involving rubber modification and cross-linking yields fully reworkable, elastic rubber products.

Termo-tersinir Çapraz bağlı Lastik Via Diels-Alder Kimya hazırlanması ve Özellikleri

A method for using Diels Alder thermo-reversible chemistry as cross-linking tool for rubber products is demonstrated. In this work, a commercial ...

Monitoring the Effects of Illumination on the Structure of Conjugated Polymer Gels Using Neutron Scattering

We demonstrate a protocol to effectively monitor the gelation process of a high concentration solution of conjugated polymer both in the presence and absence of white light exposure. By instituting a controlled temperature ramp, the gelation of these materials can be precisely monitored as they proceed through this structural evolution, which effectively mirrors the conditions experienced during the solution deposition phase of organic electronic device fabrication. Using small angle neutron scattering (SANS) and ultra-small angle neutron scattering (USANS) along with appropriate fitting protocols we quantify the evolution of select structural parameters throughout this process. Thorough analysis indicates that continued light exposure throughout the gelation process significantly alters the structure of the ultimately formed gel. Specifically, the aggregation process of poly(3-hexylthiophene-2,5-diyl) (P3HT) nano-scale aggregates is negatively affected by the presence of illumination, ultimately resulting in the retardation of growth in conjugated polymer microstructures and the formation of smaller scale macro-aggregate clusters.

A protocol for the analysis of gels formed from the optoelectronic conjugated polymer poly(3-hexylthiophene-2,5-diyl) (P3HT) using small and ultra-small angle neutron scattering in both the presence and absence of illumination is presented.

Aydınlatma nötron saçılma kullanarak konjuge polimer jelleri yapısını etkilerinin izlenmesi

We demonstrate a protocol to effectively monitor the gelation process of a high concentration solution of conjugated polymer both in the presence and ...

Microfluidic Dry-spinning and Characterization of Regenerated Silk Fibroin Fibers

The protocol demonstrates a method for mimicking the spinning process of silkworm. In the native spinning process, the contracting spinning duct enables the silk proteins to be compact and ordered by shearing and elongation forces. Here, a biomimetic microfluidic channel was designed to mimic the specific geometry of the spinning duct of the silkworm. Regenerated silk fibroin (RSF) spinning doped with high concentration, was extruded through the microchannel to dry-spin fibers at ambient temperature and pressure. In the post-treated process, the as-spun fibers were drawn and stored in ethanol aqueous solution. Synchrotron radiation wide-angle X-ray diffraction (SR-WAXD) technology was used to investigate the microstructure of single RSF fibers, which were fixed to a sample holder with the RSF fiber axis normal to the microbeam of the X-ray. The crystallinity, crystallite size, and crystalline orientation of the fiber were calculated from the WAXD data. The diffraction arcs near the equator of the two-dimensional WAXD pattern indicate that the post-treated RSF fiber has a high orientation degree.

A protocol for the microfluidic spinning and microstructure characterization of regenerated silk fibroin monofilament is presented.

Mikrosıvısal kuru-iplik ve rejenere ipek Fibroin lifleri karakterizasyonu

The protocol demonstrates a method for mimicking the spinning process of silkworm. In the native spinning process, the contracting spinning duct enables ...

Time-resolved Photophysical Characterization of Triplet-harvesting Organic Compounds at an Oxygen-free Environment Using an iCCD Camera

Here, we present a sensible method of the acquisition and analysis of time-resolved photoluminescence using an ultrafast iCCD camera. This system enables the acquisition of photoluminescence spectra covering the time regime from nanoseconds up to 0.1 s. This enables us to follow the changes in the intensity (decay) and emission of the spectra over time. Using this method, it is possible to study diverse photophysical phenomena, such as the emission of phosphorescence, and the contributions of prompt and delayed fluorescence in molecules showing thermally activated delayed fluorescence (TADF). Remarkably, all spectra and decays are obtained in a single experiment. This can be done for solids (thin film, powder, crystal) and liquid samples, where the only limitations are the spectral sensitivity of the camera and the excitation wavelength (532 nm, 355 nm, 337 nm, and 266 nm). This technique is, thus, very important when investigating the excited state dynamics in organic emitters for their application in organic light-emitting diodes and other areas where triplet harvesting is of paramount importance. Since triplet states are strongly quenched by oxygen, emitters with efficient TADF luminescence, or those showing room temperature phosphorescence (RTP), must be correctly prepared in order to remove any dissolved oxygen from solutions and films. Otherwise, no long-lived emission will be observed. The method of degassing solid samples as presented in this work is basic and simple, but the degassing of liquid samples creates additional difficulties and is particularly interesting. A method of minimizing solvent loss and changing the sample concentration, while still enabling to remove oxygen in a very efficient and a repeatable manner, is presented in this work.

Here, we present a method of the spectroscopic characterization of organic molecules by means of time-resolved photoluminescence spectroscopy on the nanosecond-to-millisecond timescale in oxygen-free conditions. Methods to efficiently remove oxygen from the samples and, thus, limit luminescence quenching are also described.

Zaman karar vermek Photophysical karakterizasyonu üçlüsü-hasat organik bileşikler bir oksijensiz ortamı kullanarak bir ICCD kamera

Here, we present a sensible method of the acquisition and analysis of time-resolved photoluminescence using an ultrafast iCCD camera. This system enables ...

Raman and IR Spectroelectrochemical Methods as Tools to Analyze Conjugated Organic Compounds

In the presented work, two spectroelectrochemical techniques are discussed as tools for the analysis of the structural changes occurring in the molecule on the vibrational level of energy. Raman and IR spectroelectrochemistry can be used for advanced characterization of the structural changes in the organic electroactive compounds. Here, the step-by-step analysis by means of Raman and IR spectroelectrochemistry is shown. Raman and IR spectroelectrochemical techniques provide complementary information about structural changes occurring during an electrochemical process, i.e. allows for the investigation of redox processes and their products. The examples of IR and Raman spectroelectrochemical analysis are presented, in which the products of the redox reactions, both in solution and solid state, are identified.

A protocol of step-by-step Raman and IR spectroelectrochemical analysis is presented.

Raman ve IR spektroelektrokimyasal yöntemleri araçları olarak konjuge organik bileşikler çözümlemek için

In the presented work, two spectroelectrochemical techniques are discussed as tools for the analysis of the structural changes occurring in the molecule ...

Reactive Vapor Deposition of Conjugated Polymer Films on Arbitrary Substrates

We demonstrate a method of conformally coating conjugated polymers on arbitrary substrates using a custom-designed, low-pressure reaction chamber. Conductive polymers, poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-propylenedioxythiophene) (PProDOT), and a semiconducting polymer, poly(thieno[3,2-b]thiophene) (PTT), were deposited on unconventional highly-disordered and textured substrates with high surface areas, such as paper, towels and fabrics. This reported deposition chamber is an improvement of previous vapor reactors because our system can accommodate both volatile and nonvolatile monomers, such as 3,4-propylenedioxythiophene and thieno[3,2-b]thiophene. Utilization of both solid and liquid oxidants are also demonstrated. One limitation of this method is that it lacks sophisticated in situ thickness monitors. Polymer coatings made by the commonly used solution-based coating methods, such as spin-coating and surface grafting, are often not uniform or susceptible to mechanical degradation. This reported vapor phase deposition method overcomes those drawbacks and is a strong alternative to common solution-based coating methods. Notably, polymer films coated by the reported method are uniform and conformal on rough surfaces, even at a micrometer scale. This feature allows for future application of vapor deposited polymers in electronics devices on flexible and highly textured substrates.

This paper presents a protocol for reactive vapor deposition of poly(3,4-ethylenedioxythiophene), poly(3,4-propylenedioxythiophene), and poly(thieno[3,2-b]thiophene) films on glass slides and rough substrates, such as textiles and paper.