Sign In

1.4 : Types of Errors: Detection and Minimization

Error is the deviation of the obtained result from the true, expected value or the estimated central value. Errors are expressed in absolute or relative terms.

Absolute error in a measurement is the numerical difference from the true or central value. Relative error is the ratio between absolute error and the true or central value, expressed as a percentage.

Errors can be classified by source, magnitude, and sign. There are three types of errors: systematic, random, and gross.

Systematic or determinate errors emerge from known sources and are reproducible during replicate measurements. Defective equipment and experiment design flaws are familiar sources of these errors. These errors can be minimized by employing standard reference materials, independent analysis, or varying the sample size.

Random errors or indeterminate errors are difficult to reproduce by repeating measurements. These errors originate from uncontrolled variables like electronic noise in the circuit of an electrical instrument and irregular changes in the heat loss rate from a solar collector due to changes in the wind.

Gross errors are caused by human mistakes. The magnitude of these errors is often high. The origin of such errors is entirely based on the observer.

Tags
Types Of ErrorsDetectionMinimizationAbsolute ErrorRelative ErrorSystematic ErrorsRandom ErrorsGross ErrorsMeasurement ErrorReproducible MeasurementsDefective EquipmentExperiment Design FlawsStandard Reference MaterialsUncontrolled VariablesHuman Mistakes

From Chapter 1:

article

Now Playing

1.4 : Types of Errors: Detection and Minimization

Chemical Applications of Statistical Analyses

696 Views

article

1.1 : SI Units: 2019 Redefinition

Chemical Applications of Statistical Analyses

669 Views

article

1.2 : Degrees of Freedom

Chemical Applications of Statistical Analyses

2.6K Views

article

1.3 : Statistical Analysis: Overview

Chemical Applications of Statistical Analyses

3.4K Views

article

1.5 : Systematic Error: Methodological and Sampling Errors

Chemical Applications of Statistical Analyses

761 Views

article

1.6 : Random Error

Chemical Applications of Statistical Analyses

399 Views

article

1.7 : Standard Deviation of Calculated Results

Chemical Applications of Statistical Analyses

3.2K Views

article

1.8 : Introduction to <em>z</em> Scores

Chemical Applications of Statistical Analyses

141 Views

article

1.9 : Uncertainty: Overview

Chemical Applications of Statistical Analyses

153 Views

article

1.10 : Propagation of Uncertainty from Random Error

Chemical Applications of Statistical Analyses

237 Views

article

1.11 : Propagation of Uncertainty from Systematic Error

Chemical Applications of Statistical Analyses

146 Views

article

1.12 : Uncertainty: Confidence Intervals

Chemical Applications of Statistical Analyses

2.3K Views

article

1.13 : Significance Testing: Overview

Chemical Applications of Statistical Analyses

3.0K Views

article

1.14 : Identifying Statistically Significant Differences: The <em>F</em>-Test

Chemical Applications of Statistical Analyses

694 Views

article

1.15 : Comparing Experimental Results: Student's <em>t</em>-Test

Chemical Applications of Statistical Analyses

835 Views

See More

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved