Sign In

5.19 : Precipitation Processes

The experimental conditions in a gravimetric analysis should be optimized to maximize the particle size and purity of the obtained precipitate. Ideally, the concentration of the precipitating reagent should be low with effective stirring to maintain low relative supersaturation for the growth of large crystals. In homogeneous precipitation, the precipitant is slowly generated by a chemical reaction in the solution to avoid local reagent excesses. For example, urea decomposes gradually to release hydroxide ions in the precipitation of aluminum as its hydroxide. At higher temperatures, solubility increases, and supersaturation decreases, resulting in larger crystals.

The precipitate may take up substances normally soluble in the mother liquor, resulting in coprecipitated impurities that could be adsorbed or absorbed. To minimize these impurities, crystalline precipitates are allowed to stand in the hot mother liquor in a process called digestion (Ostwald ripening). During digestion, small crystals tend to dissolve and precipitate onto the surface of larger crystals, while adjacent particles form bridges. This slow recrystallization increases particle size and decreases the effects of coprecipitation.

Tags
Precipitation ProcessesGravimetric AnalysisParticle SizePurityPrecipitating ReagentHomogeneous PrecipitationLocal Reagent ExcessesAluminum HydroxideSolubilitySupersaturationCoprecipitated ImpuritiesDigestionOstwald RipeningRecrystallization

From Chapter 5:

article

Now Playing

5.19 : Precipitation Processes

Complexometric Titration, Precipitation Titration, and Gravimetry

170 Views

article

5.1 : Complexometric Titration: Overview

Complexometric Titration, Precipitation Titration, and Gravimetry

3.4K Views

article

5.2 : Complexometric Titration: Ligands

Complexometric Titration, Precipitation Titration, and Gravimetry

666 Views

article

5.3 : Properties of Organometallic Compounds

Complexometric Titration, Precipitation Titration, and Gravimetry

595 Views

article

5.4 : EDTA: Chemistry and Properties

Complexometric Titration, Precipitation Titration, and Gravimetry

1.2K Views

article

5.5 : EDTA: Conditional Formation Constant

Complexometric Titration, Precipitation Titration, and Gravimetry

407 Views

article

5.6 : EDTA: Auxiliary Complexing Reagents

Complexometric Titration, Precipitation Titration, and Gravimetry

346 Views

article

5.7 : EDTA: Direct, Back-, and Displacement Titration

Complexometric Titration, Precipitation Titration, and Gravimetry

1.2K Views

article

5.8 : EDTA: Indirect and Alkalimetric Titration

Complexometric Titration, Precipitation Titration, and Gravimetry

380 Views

article

5.9 : Complexometric EDTA Titration Curves

Complexometric Titration, Precipitation Titration, and Gravimetry

550 Views

article

5.10 : Effects of EDTA on End-Point Detection Methods

Complexometric Titration, Precipitation Titration, and Gravimetry

110 Views

article

5.11 : Masking and Demasking Agents

Complexometric Titration, Precipitation Titration, and Gravimetry

1.5K Views

article

5.12 : Precipitation Titration: Overview

Complexometric Titration, Precipitation Titration, and Gravimetry

3.1K Views

article

5.13 : Precipitation Titration Curve: Analysis

Complexometric Titration, Precipitation Titration, and Gravimetry

666 Views

article

5.14 : Precipitation Titration: Endpoint Detection Methods

Complexometric Titration, Precipitation Titration, and Gravimetry

979 Views

See More

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved