an in vitro assay for neutrophil serine protease activity using a fluorescent reporter

An In Vitro Assay for Neutrophil Serine Protease Activity Using a Fluorescent Reporter

Thaw enzymes on ice, and set up an enzyme standard curve as described in the text manuscript. In parallel to the standard preparation, dilute sputum samples in activation buffer. On the plate reader, set the excitation wavelength for the NE FRET probe NEmo-1 to 354 nanometers and the emission wavelength to 400 nanometers for donor and 490 nanometers for acceptor.
For the CG FRET probe sSAM, set the excitation wavelength to 405 nanometers, and emission to 485 nanometers for donor, and 580 nanometers for acceptor. Add 40 microliters of samples, standards, or blanks into the wells of a Black 96-well half-area plate and add the master mix.
Start the plate reader, and record the donor-to-acceptor ratio increase after every 60 to 90 seconds for at least 20 minutes or until the increase in the signal reaches a plateau. Export the data and calculate the donor-to-acceptor ratio by dividing the donor RFU by the acceptor RFU for each time point and sample. Then, calculate the donor-to-acceptor ratio mean and standard deviation. Determine the slope within the linear growth of the donor-to-acceptor ratio change.

an-vitro-assay-for-neutrophil-serine-protease-activity-using

Research

JoVE Encyclopedia of Experiments

Immunology

Immunodiagnostics

Specialized Assays

An In Vitro Assay for Measuring Neutrophil Serine Protease Activity Using a Fluorescent Reporter

EoE Sub Articles

Detection of Protease Activity by Fluorescent Peptide Zymography

The purpose of this method is to measure the proteolytic activity of complex biological samples. The samples are separated by molecular weight using electrophoresis through a resolving gel embedded with a degradable substrate. This method differs from traditional gel zymography in that a quenched fluorogenic peptide is covalently incorporated into the resolving gel instead of full length proteins, such as gelatin or casein. Use of the fluorogenic peptides enables direct detection of proteolytic activity without additional staining steps. Enzymes within the biological samples cleave the quenched fluorogenic peptide, resulting in an increase in fluorescence. The fluorescent signal in the gels is then imaged with a standard fluorescent gel scanner and quantified using densitometry. The use of peptides as the degradable substrate greatly expands the possible proteases detectable with zymographic techniques.

Here, we present a detailed protocol for a modified zymographic technique in which fluorescent peptides are used as the degradable substrate in place of native proteins. Electrophoresis of biological samples in fluorescent peptide zymograms enables detection of a wider range of proteases than previous zymographic techniques.

The purpose of this method is to measure the proteolytic activity of complex biological samples. The samples are separated by molecular weight using ...

JoVE Journal

Cancer Research

A High-Throughput Luciferase Assay to Evaluate Proteolysis of the Single-Turnover Protease PCSK9

Proprotein convertase subtilisin/kexin type 9 (PCSK9) is a single-turnover protease which regulates serum low-density lipoprotein (LDL) levels and, consequently, cardiovascular disease. Although PCSK9 proteolysis is required for its full hypercholesterolemic effect, the evaluation of its proteolytic function is challenging: PCSK9 is only known to cleave itself, undergoes only a single turnover, and after proteolysis, retains its substrate in its active site as an auto-inhibitor. The methods presented here describe an assay which overcomes these challenges. The assay focuses on intermolecular proteolysis in a cell-based context and links successful cleavage to the secreted luciferase activity, which can be easily read out in the conditioned medium. Via sequential steps of mutagenesis, transient transfection, and a luciferase readout, the assay can probe PCSK9 proteolysis under conditions of either genetic or molecular perturbation in a high-throughput manner. This system is well suited for both the biochemical evaluation of clinically discovered missense single-nucleotide polymorphisms (SNPs), as well as for the screening of small-molecule inhibitors of PCSK9 proteolysis.

This protocol presents a method to evaluate the proteolytic activity of an intrinsically low-activity, single turnover protease in a cellular context. Specifically, this method is applied to evaluate the proteolytic activity of PCSK9, a key driver of lipid metabolism whose proteolytic activity is required for its ultimate hypercholesterolemic function.

Proprotein convertase subtilisin/kexin type 9 (PCSK9) is a single-turnover protease which regulates serum low-density lipoprotein (LDL) levels and, ...

Biochemistry

Nanosensors to Detect Protease Activity In Vivo for Noninvasive Diagnostics

Proteases are multi-functional enzymes that specialize in the hydrolysis of peptide-bonds and control broad biological processes including homeostasis and allostasis. Moreover, dysregulated protease activity drives pathogenesis and is a functional biomarker of diseases such as cancer; therefore, the ability to detect protease activity in vivo may provide clinically relevant information for biomedical diagnostics. The goal of this protocol is to create nanosensors that probe for protease activity in vivo by producing a quantifiable signal in urine. These protease nanosensors consist of two components: a nanoparticle and substrate. The nanoparticle functions to increase circulation half-life and substrate delivery to target disease sites. The substrate is a short peptide sequence (6-8 AA), which is designed to be specific to a target protease or group of proteases. The substrate is conjugated to the surface of the nanoparticle and is terminated by a reporter, such as a fluorescent marker, for detection. As dysregulated proteases cleave the peptide substrate, the reporter is filtered into urine for quantification as a biomarker of protease activity. Herein we describe construction of a nanosensor for matrix metalloproteinase 9 (MMP9), which is associated with tumor progression and metastasis, for detection of colorectal cancer in a mouse model.

Nanosensors to Detect Protease Activity In Vivo for Noninvasive Diagnostics

Proteases are tightly regulated enzymes involved in fundamental biological processes, and dysregulated protease activity drives progression of complex diseases such as cancer. This method&#39;s goal is to create nanosensors that measure protease activity in vivo by producing a cleavage signal that is detectable from host urine and discriminates disease.

Proteases are multi-functional enzymes that specialize in the hydrolysis of peptide-bonds and control broad biological processes including homeostasis and ...

An In Vitro Assay for Neutrophil Serine Protease Activity Using a Fluorescent Reporter

Transcript