A subscription to JoVE is required to view this content.
-- views • 0:0 min
Begin by switching on the amplifier positioned outside of the Faraday cage. Open the EEG software, and start the EEG acquisition, and observe the EEG signal produced by unconnected cables.
Next, connect the animal to the tethered EEG recording system by holding the animal's head between two stretched fingers of one hand, and screwing down the connectors to the electrode pedestal using the other free hand.
Set an amplification factor on each channel of the amplifier according to the electrode signal of a single animal so the EEG signal is in scale. Then, let the animal explore the new cage for at least one hour under the direct observation of the researcher.
Adjust the cable according to the animal's commodity, and ensure that the cables do not interfere with the animal's movements and lying posture.
ABOUT JoVE
Copyright © 2024 MyJoVE Corporation. All rights reserved