Name: human cartilage tissue fabrication using three-dimensional inkjet printing technology
Uploaded: 2014-06-10T13:45:00
Description: Watch this Scientific Journal Video about Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology at JoVE.com

The authors would like to acknowledge the support from the New York Capital Region Research Alliance Grant.

1. Bioprinting Platform Establishment
The printer modification was based on a HP Deskjet 500 thermal inkjet printer and HP 51626a black ink cartridge.
<ol>
	<li>Remove the top plastic cover of the printer and carefully detach the control panel from the cover.</li>
	<li>Detach the 3&#160;cable connections between the printer top portion and base. Remove the printer top portion from the base.</li>
	<li>On the printer top portion, remove the small plastic and rubber accessories (printhead clean...

<ol>
	<li>Cui, X., Boland, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Human+microvasculature+fabrication+using+thermal+inkjet+printing+technology.">Human microvasculature fabrication using thermal inkjet printing technology.</a> Biomaterials. 30, 6221-6227 (2009).</li><li>Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., D'Lima, D. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+human+cartilage+repair+using+three-dimensional+bioprinting+technology.">Direct human cartilage repair using three-dimensional bioprinting technology.</a> Tissue Eng Part A. 18, 1304-1312 (2012).</li><li>Cui, X., Breitenkamp, K., Lotz, M., D'Lima, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synergistic+action+of+fibroblast+growth+factor-2+and+transforming+growth+factor-beta1+enhances+bioprinted+human+neocartilage+formation.">Synergistic action of fibroblast growth factor-2 and transforming growth factor-beta1 enhances bioprinted human neocartilage formation.</a> Biotechnol. Bioeng. 109, 2357-2368 (2012).</li><li>Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., Colwell, C. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+human+cartilage+repair+using+thermal+inkjet+printing+technology.">Direct human cartilage repair using thermal inkjet printing technology.</a> Osteoarthritis and Cartilage. 19, (2011).</li><li>Cui, X., Boland, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+deposition+of+human+microvascular+endothelial+cells+and+biomaterials+for+human+microvasculature+fabrication+using+inkjet+printing.">Simultaneous deposition of human microvascular endothelial cells and biomaterials for human microvasculature fabrication using inkjet printing.</a> NIP24/digital Fabrication 2008: 24th International Conference on Digital Printing Technologies, Technical Program and Proceedings. 24, 480-483 (2008).</li><li>Cui, X., Dean, D., Ruggeri, Z. M., Boland, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell+damage+evaluation+of+thermal+inkjet+printed+Chinese+hamster+ovary+cells.">Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells.</a> Biotechnol. Bioeng. 106, 963-969 (2010).</li><li>Cui, X., Hasegawa, A., Lotz, M., D'Lima, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structured+three-dimensional+co-culture+of+mesenchymal+stem+cells+with+meniscus+cells+promotes+meniscal+phenotype+without+hypertrophy.">Structured three-dimensional co-culture of mesenchymal stem cells with meniscus cells promotes meniscal phenotype without hypertrophy.</a> Biotechnol. Bioeng. 109, 2369-2380 (2012).</li><li>Cui, X., Gao, G., Qiu, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Accelerated+myotube+formation+using+bioprinting+technology+for+biosensor+applications.">Accelerated myotube formation using bioprinting technology for biosensor applications.</a> Biotechnol. Lett. 35, 315-321 (2013).</li><li>Cui, X., Boland, T., D'Lima, D. D., Lotz, M. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermal+inkjet+printing+in+tissue+engineering+and+regenerative+medicine.">Thermal inkjet printing in tissue engineering and regenerative medicine.</a> Recent Pat Drug Deliv Formul. 6, 149-155 (2012).</li><li>Bryant, S. J., Anseth, K. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hydrogel+properties+influence+ECM+production+by+chondrocytes+photoencapsulated+in+poly(ethylene+glycol)+hydrogels.">Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels.</a> Journal of Biomedical Materials Research. 59, 63-72 (2002).</li><li>Elisseeff, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photoencapsulation+of+chondrocytes+in+poly(ethylene+oxide)-based+semi-interpenetrating+networks.">Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks.</a> Journal of Biomedical Materials Research. 51, 164-171 (2000).</li><li>Buskirk, W. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+A+High-Resolution+Thermal+Inkjet+Printhead.">Development of A High-Resolution Thermal Inkjet Printhead.</a> Hewlett-Packard Journal. 39, 55-61 (1988).</li><li>Harmon, J. P., Widder, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrating+the+Printhead+Into+the+HP+Deskjet+Printer.">Integrating the Printhead Into the HP Deskjet Printer.</a> Hewlett-Packard Journal. 39, 62-66 (1988).</li><li>Kim, T. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+model+for+cartilage+tissue+engineering+to+regenerate+the+zonal+organization+of+articular+cartilage.">Experimental model for cartilage tissue engineering to regenerate the zonal organization of articular cartilage.</a> Osteoarthritis and Cartilage. 11, 653-664 (2003).</li><li>Sharma, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Designing+zonal+organization+into+tissue-engineered+cartilage.">Designing zonal organization into tissue-engineered cartilage.</a> Tissue Engineering. 13, 405-414 (2007).</li><li>Cohen, D. L., Lipton, J. I., Bonassar, L. J., Lipson, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Additive+manufacturing+for+in+situ+repair+of+osteochondral+defects.">Additive manufacturing for in situ repair of osteochondral defects.</a> Biofabrication. 2, (2010).</li></ol>

This 3D bioprinting system with simultaneous photopolymerization capacity provides a significantly greater printing resolution than the best previously reported method of in situ printing of osteochondral defects using syringe extruded a cellular alginate hydrogel16. Higher printing resolution is particularly critical for cartilage tissue engineering to restore the anatomic cartilage zonal organization. Simultaneous photopolymerization during layer-by-layer assembly is crucial to maintain precise depo...

Bioprinting based on thermal inkjet printing is one of the most promising enabling technologies in the field of tissue engineering and regenerative medicine. With digital control and high throughput printheads&#160;cells, scaffolds, and growth factors can be precisely deposited to the desired two-dimensional (2D) and three-dimensional (3D) positions rapidly. Many successful applications have been achieved using this technology in tissue engineering and regenerative medicine1-9. In this paper, a bioprinting platform was established with a modified Hewlett-Packard (HP) Deskjet 500 thermal inkjet printer and a simultaneous photopolymerization system. Synthetic hydrogels formulated from poly(ethylene glycol) (PEG) have shown the capacity of maintaining chondrocyte viability and promote chondrogenic ECM production10,11. In addition, photocrosslinkable PEG is highly soluble in water with low viscosity, which makes it ideal for simultaneous polymerization during 3D bioprinting. In this paper, human chondrocytes suspended in poly(ethylene) glycol diacrylate (PEGDA; MW 3,400) were precisely printed to construct neocartilage layer-by-layer with 1,400 dpi in 3D resolution. Homogeneous distribution of deposited cells in a 3D scaffold was observed, which generated cartilage tissue with excellent mechanical properties and enhanced ECM production. By contrast, in manual fabrication the cells accumulated at the bottom of the gel instead of their initially deposited positions due to slower scaffold polymerization, which led to inhomogeneous cartilage formation after culture2,3.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">HP Deskjet 500 thermal inkjet printer</td>
			<td style="width:221px;">Hewlett-Packard</td>
			<td style="width:195px;">C2106a</td>
			<td style="width:433px;">Discontinued. Purchased refurbished from internet vendor.</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">HP black ink cartridge</td>
			<td style="width:221px;">Hewlett-Packard</td>
			<td style="width:195px;">51626a</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Ultraviolet lamp</td>
			<td style="width:221px;">UVP</td>
			<td style="width:195px;">B-100AP</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">UV light meter</td>
			<td style="width:221px;">General Tools</td>
			<td style="width:195px;">UV513AB</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Zeiss LSM 510 laser scanning microscope</td>
			<td style="width:221px;">Carl Zeiss</td>
			<td style="width:195px;">LSM 510</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Dulbeccos Modified Eagles Medium (DMEM)</td>
			<td style="width:221px;">Mediatech</td>
			<td style="width:195px;">10-013</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Penicillin-streptomycin-glutamine (PSG)</td>
			<td style="width:221px;">Invitrogen</td>
			<td style="width:195px;">10378-016</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Accutase cell dissociation reagent</td>
			<td style="width:221px;">Invitrogen</td>
			<td style="width:195px;">A11105-01</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Phosphate buffered saline (PBS)</td>
			<td style="width:221px;">Invitrogen</td>
			<td style="width:195px;">10010-023</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Live/Dead viability/cytotoxicity Kit</td>
			<td style="width:221px;">Invitrogen</td>
			<td style="width:195px;">L-3224</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Poly(ethylene glycol) diacrylate (PEGDA)</td>
			<td style="width:221px;">Glycosan Biosystems</td>
			<td style="width:195px;">GS700</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Irgacure 2959</td>
			<td style="width:221px;">Ciba Specialty Chemicals</td>
			<td style="width:195px;">I-2959</td>
			<td style="width:433px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:357px;">Human articular chondrocytes</td>
			<td style="width:221px;">Lonza</td>
			<td style="width:195px;">CC-2550</td>
			<td style="width:433px;"></td>
		</tr>
	</tbody>
</table>

human cartilage tissue fabrication using three-dimensional inkjet printing technology

Bioprinting, which is based on thermal inkjet printing, is one of the most attractive enabling technologies in the field of tissue engineering and regenerative medicine. With digital control&#160;cells, scaffolds, and growth factors can be precisely deposited to the desired two-dimensional (2D) and three-dimensional (3D) locations rapidly. Therefore, this technology is an ideal approach to fabricate tissues mimicking their native anatomic structures. In order to engineer cartilage with native zonal organization, extracellular matrix composition (ECM), and mechanical properties, we developed a bioprinting platform using a commercial inkjet printer with simultaneous photopolymerization capable for 3D cartilage tissue engineering. Human chondrocytes suspended in poly(ethylene glycol) diacrylate (PEGDA) were printed for 3D neocartilage construction via layer-by-layer assembly. The printed cells were fixed at their original deposited positions, supported by the surrounding scaffold in simultaneous photopolymerization. The mechanical properties of the printed tissue were similar to the native cartilage. Compared to conventional tissue fabrication, which requires longer UV exposure, the viability of the printed cells with simultaneous photopolymerization was significantly higher. Printed neocartilage demonstrated excellent glycosaminoglycan (GAG) and collagen type II production, which was consistent with gene expression. Therefore, this platform is ideal for accurate cell distribution and arrangement for anatomic tissue engineering.

The modified thermal inkjet printer was capable for cell and scaffold deposition at high throughput and excellent cell viability. Combining with simultaneous photopolymerization and photosensitive biomaterials, this technology is able to fix the cells and other printed substances to the initially deposited locations. According to the properties of the modified thermal inkjet printer, the 2D printing resolution was 300 dpi with a single ink drop volume of 130 pl. There are 50 firing nozzles in each printhead with 3.6 kHz ...

Watch this Scientific Journal Video about Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology at JoVE.com

Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology

The methods described in this paper show how to convert a commercial inkjet printer into a bioprinter with simultaneous UV polymerization. The printer is capable of constructing 3D tissue structure with cells and biomaterials. The study demonstrated here constructed a 3D neocartilage.

Bioprinting, which is based on thermal inkjet printing, is one of the most attractive enabling technologies in the field of tissue engineering and ...

Research

JoVE Journal

Bioengineering

Planar and Three-Dimensional Printing of Conductive Inks

Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical ...

Generation of a Three-dimensional Full Thickness Skin Equivalent and Automated Wounding

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models ...

Three-dimensional Biomimetic Technology: Novel Biorubber Creates Defined Micro- and Macro-scale Architectures in Collagen Hydrogels

Tissue scaffolds play a crucial role in the tissue regeneration process. The ideal scaffold must fulfill several requirements such as having proper ...

Fabrication of Inverted Colloidal Crystal Poly(ethylene glycol) Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

Fabrication of Inverted Colloidal Crystal Polyethylene glycol Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

The ability to maintain hepatocyte function in vitro, for the purpose of testing xenobiotics&#39; cytotoxicity, studying virus infection and developing ...

Fabrication of Three-dimensional Paper-based Microfluidic Devices for Immunoassays

Paper wicks fluids autonomously due to capillary action. By patterning paper with hydrophobic barriers, the transport of fluids can be controlled and ...

Melt Electrospinning Writing of Three-dimensional Poly(&#949;-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

Melt Electrospinning Writing of Three-dimensional PolyÃƒÆ’Ã…Â½Ãƒâ€šÃ‚Âµ-caprolactone Scaffolds with Controllable Morphologies for Tissue Engineering Applications

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology ...

Culturing Mammalian Cells in Three-dimensional Peptide Scaffolds

A useful technique for culturing cells in a self-assembling nanofiber three-dimensional (3D) scaffold is described. This culture system recreates an ...

Three-dimensional Printing of Thermoplastic Materials to Create Automated Syringe Pumps with Feedback Control for Microfluidic Applications

Microfluidics has become a critical tool in research across the biological, chemical, and physical sciences. One important component of microfluidic ...

Fabrication of Decellularized Cartilage-derived Matrix Scaffolds

Osteochondral defects lack sufficient intrinsic repair capacity to regenerate functionally sound bone and cartilage tissue. To this extent, cartilage ...

Pancreatic Tissue-Derived Extracellular Matrix Bioink for Printing 3D Cell-Laden Pancreatic Tissue Constructs

The transplantation of pancreatic islets is a promising treatment for patients who suffer from type 1 diabetes accompanied by hypoglycemia and secondary ...