Name: determination of carbonyl functional groups in bio-oils by potentiometric titration: the faix method
Uploaded: 2017-02-07T14:00:00
Description: Watch this Scientific Journal Video about Determination of Carbonyl Functional Groups in Bio-oils by Potentiometric Titration: The Faix Method at JoVE.com

This work was supported by the U.S. Department of Energy under Contract No. DE-AC36-08GO28308 with the National Renewable Energy Laboratory. Funding provided by U.S. DOE Office of Energy Efficiency and Renewable Energy Bioenergy Technologies Office. The U.S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U.S. Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U.S. Government purposes.

Caution: Please review all relevant material safety data sheets (MSDS) before beginning. Ethanol is flammable. All applicable chemical handling procedures should be followed, as well as all applicable waste disposable and handling procedures.
1. Reagent Solutions
<ol>
	<li>Prepare the hydroxylamine hydrochloride solution (Solution A): Add 7.7 g of hydroxylamine hydrochloride and 50 mL of deionized water to a 250 mL volumetric flask. When all solids have dissolved, dilute to mark with ethanol...

<ol>
	<li>Oasmaa, A., Kuoppala, E., Solantausta, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fast+pyrolysis+of+forestry+residue.+2.+physicochemical+composition+of+product+liquid.">Fast pyrolysis of forestry residue. 2. physicochemical composition of product liquid.</a> Energy Fuels. 17 (2), 433-443 (2003).</li><li>Olarte, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stabilization+of+Softwood-Derived+Pyrolysis+Oils+for+Continuous+Bio-oil+Hydroprocessing.">Stabilization of Softwood-Derived Pyrolysis Oils for Continuous Bio-oil Hydroprocessing.</a> Top. Catal. 59 (1), 55-64 (2016).</li><li>Nicolaides, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> The chemical characterization of pyrolytic oils. , (1984).</li><li>Oasmaa, A., Korhonen, J., Kuoppala, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+approach+for+stability+measurement+of+wood-based+fast+pyrolysis+bio-oils.">An approach for stability measurement of wood-based fast pyrolysis bio-oils.</a> Energy Fuels. 25 (7), 3307-3313 (2011).</li><li>Chen, C. L., Lin, S. Y., Dence, C. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Methods in Lignin Chemistry. , 446-457 (1992).</li><li>Scholze, B., Hanser, C., Meier, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+the+water-insoluble+fraction+from+fast+pyrolysis+liquids+(pyrolytic+lignin)+Part+II.+GPC,+carbonyl+groups,+and+13C-NMR.">Characterization of the water-insoluble fraction from fast pyrolysis liquids (pyrolytic lignin) Part II. GPC, carbonyl groups, and 13C-NMR.</a> J. Anal. Appl. Pyrolysis. 58-59, 387-400 (2001).</li><li>Bayerbach, R., Meier, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+the+water-insoluble+fraction+from+fast+pyrolysis+liquids+(pyrolytic+lignin).+Part+IV:+Structure+elucidation+of+oligomeric+molecules.">Characterization of the water-insoluble fraction from fast pyrolysis liquids (pyrolytic lignin). Part IV: Structure elucidation of oligomeric molecules.</a> J. Anal. Appl. Pyrolysis. 85 (1-2), 98-107 (2009).</li><li>Faix, O., Andersons, B., Zakis, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Determination+of+Carbonyl+Groups+of+Six+Round+Robin+Lignins.">Determination of Carbonyl Groups of Six Round Robin Lignins.</a> Holzforschung. 52, 268-272 (1998).</li><li>Black, S., Ferrell, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Determination+of+Carbonyl+Groups+in+Pyrolysis+Bio-oils+Using+Potentiometric+Titration:+Review+and+Comparison+of+Methods.">Determination of Carbonyl Groups in Pyrolysis Bio-oils Using Potentiometric Titration: Review and Comparison of Methods.</a> Energy Fuels. 30 (2), 1071-1077 (2016).</li><li>Ferrell, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Standardization+of+Chemical+Analytical+Techniques+for+Pyrolysis+Bio-oil:+History,+Challenges,+and+Current+Status+of+Methods.">Standardization of Chemical Analytical Techniques for Pyrolysis Bio-oil: History, Challenges, and Current Status of Methods.</a> Biofuels, Bioprod. Biorefin. 10, 496-507 (2016).</li></ol>

Representative titration curves are shown in Figure 2. A blank titration, as well as a titration for a pyrolysis oil sample, are shown. Furthermore, the first derivative of the titration curve (dpH/dV) is shown, which allows for easy recognition of the titration endpoint. The inset table on Figure 2 shows triplicate data for both pyrolysis oil and blank titrations, with average values and standard deviations. The endpoint values shown (in mL) are used in Section 4 to calculate the total ...

While pyrolysis bio-oils are comprised of a large variety of compounds and chemical functional groups, quantification of carbonyl groups is especially important. Carbonyls are known to be responsible for the instability of bio-oil during both storage1 and processing2. The titration method presented here is a simple technique which can reliably quantify the total carbonyl content of bio-oils. Only aldehyde and ketone functional groups are quantified using this method; carboxylic acid and lactone groups are not quantified.
For analysis of bio-oils, quantification of carbonyl groups by titration has traditionally been accomplished using the method of Nicolaides3. This method has been commonly used in the bio-oil literature4,5,6,7. This is a simple procedure where carbonyls are converted to the corresponding oxime (see Figure 1). The liberated HCl reacts with pyridine to force the equilibrium to completion. The conjugate acid of pyridine is titrated with a known amount of NaOH (base titrant). The number of equivalents of NaOH used is stoichiometrically equivalent to the moles of carbonyl present in the bio-oil.
The Nicolaides method, however, has several limitations. It can require reaction times in excess of 48 hours to reach completion. This severely limits sample throughput. It utilizes pyridine, which is toxic. Sample weights of 1 to 2 g are required. Sample weight used is dependent on the amount of hydroxylamine HCl present and the carbonyl content of the sample. If initial estimates of the sample weight used are incorrect, the titration has to be repeated.
Faix et al.8 developed a method that has been modified here to address the issues of the Nicolaides method. The reaction is carried out at 80 &#176;C for 2 hours, thereby increasing sample throughput. Pyridine has been replaced with triethanolamine, which is a less toxic chemical. The sample size can be reduced to 100 to 150 mg. The triethanolamine consumes the liberated HCl, driving the reaction to completion and the unconsumed triethanolamine is titrated directly. A secondary titration of the hydroxylamine is unnecessary. Comparison of these titration methods has shown that the Nicolaides method significantly underestimates carbonyl content of bio-oils9.
The method described here has been modified from the original method8 to be more applicable to the analysis of pyrolysis bio-oils. This method was developed for the analysis of raw pyrolysis bio-oils, but it has been successfully applied to other types of biomass-derived oils, including hydrotreated bio-oils. Additionally, this method has been used to monitor changes in carbonyl content during both aging and upgrading.

<table border="0" cellpadding="0" cellspacing="0" width="818">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:403px;">Analytical balance</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td style="width:167px;">accurate to 0.1 mg</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:403px;">dry block heater with magnetic stirrer, or hot water bath with magnetic stirrer</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:403px;">Automatic titrator</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td>We used a Metrohm Titrando 809 automatic titrator, though other equivalent systems are acceptable</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:403px;">Deionized water</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:403px;">Ethanol (reagent grade)</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td>CAS # 64-17-5</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Hydroxylamine hydrochloride&#160;</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td>CAS # 5470-11-1</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Triethanolamine&#160;</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td>CAS #102-71-6</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Hydrochloric acid (37%)&#160;</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td>CAS # 7647-01-0</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Sodium Carbonate (primary standard)&#160;</td>
			<td style="width:131px;">SigmaAldrich</td>
			<td align="right" style="width:119px;">223484</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">4-(benzyloxy)benzaldehyde&#160;</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td>CAS # 4397-53-9</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Dimethyl sulfoxide</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td>CAS # 67-68-5</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">5 mL glass Reacti-vials with solid lid and teflon spinvane</td>
			<td style="width:131px;">Thermoscientific</td>
			<td style="width:119px;">TS-13223</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">200 mL volumetric flask</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Volumetric or mechanical pipettes</td>
			<td style="width:131px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
	</tbody>
</table>

determination of carbonyl functional groups in bio-oils by potentiometric titration: the faix method

Carbonyl compounds present in bio-oils are known to be responsible for bio-oil property changes upon storage and during upgrading. Specifically, carbonyls cause an increase in viscosity (often referred to as &#39;aging&#39;) during storage of bio-oils. As such, carbonyl content has previously been used as a method of tracking bio-oil aging and condensation reactions with less variability than viscosity measurements. Additionally, carbonyls are also responsible for coke formation in bio-oil upgrading processes. Given the importance of carbonyls in bio-oils, accurate analytical methods for their quantification are very important for the bio-oil community. Potentiometric titration methods based on carbonyl oximation have long been used for the determination of carbonyl content in pyrolysis bio-oils. Here, we present a modification of the traditional carbonyl oximation procedures that results in less reaction time, smaller sample size, higher precision, and more accurate carbonyl determinations. While traditional carbonyl oximation methods occur at room temperature, the Faix method presented here occurs at an elevated temperature of 80 &#176;C.

A typical titration curve consists of a single endpoint, as shown in Figure 2. Typical titrations for both a raw bio-oil sample, and a blank titration, are shown. As the endpoint lies at the inflection point in the titration curve; the endpoint can be easily identified by plotting the first derivative of the titration curve (shown on the right axis, dpH/dV, in Figure 2). Many automatic titration systems have software that calculates the derivative of the ...

Watch this Scientific Journal Video about Determination of Carbonyl Functional Groups in Bio-oils by Potentiometric Titration: The Faix Method at JoVE.com

Determination of Carbonyl Functional Groups in Bio-oils by Potentiometric Titration: The Faix Method

Here we present a potentiometric titration technique for accurately quantifying carbonyl compounds in pyrolysis bio-oils.

Carbonyl compounds present in bio-oils are known to be responsible for bio-oil property changes upon storage and during upgrading. Specifically, carbonyls ...

Research

Education

JoVE Journal

JoVE Core

Organic Chemistry

Analytical Chemistry

Chemistry

Unit 1

Aldehydes and Ketones

Complexometric Titration, Precipitation Titration, and Gravimetry

SCIENTISTS IN ACTION

Determination of the Gas-phase Acidities of Oligopeptides

Amino acid residues located at different positions in folded proteins often exhibit different degrees of acidities. For example, a cysteine residue ...

Structure and Coordination Determination of Peptide-metal Complexes Using 1D and 2D 1H NMR

Structure and Coordination Determination of Peptide-metal Complexes Using 1D and 2D 1H NMR

Copper (I) binding by metallochaperone transport proteins prevents copper oxidation and release of the toxic ions that may participate in harmful redox ...

Preparation and Use of Carbonyl-decorated Carbenes in the Activation of White Phosphorus

Here we present a protocol for the synthesis of two distinct carbonyl-decorated carbenes. Both carbenes can be prepared using nearly identical procedures ...

Layer-by-layer Synthesis and Transfer of Freestanding Conjugated Microporous Polymer Nanomembranes

CMP as large surface area materials have attracted growing interest recently, due to their high variability in the incorporation of functional groups in ...

Radiolabeling and Quantification of Cellular Levels of Phosphoinositides by High Performance Liquid Chromatography-coupled Flow Scintillation

Phosphoinositides (PtdInsPs) are essential signaling lipids responsible for recruiting specific effectors and conferring organelles with molecular ...

Synthesis of Protein Bioconjugates via Cysteine-maleimide Chemistry

Synthesis of Protein Bioconjugates via Cysteine-maleimide Chemistry

The chemical linking or bioconjugation of proteins to fluorescent dyes, drugs, polymers and other proteins has a broad range of applications, such as the ...

Determination of Thermodynamic Properties of Alkaline Earth-liquid Metal Alloys Using the Electromotive Force Technique

A novel electrochemical cell based on a CaF2 solid-state electrolyte has been developed to measure the electromotive force (emf) of binary alkaline ...

Preparation of Functional Silica Using a Bioinspired Method

The goal of the protocols described herein is to synthesize bioinspired silica materials, perform enzyme encapsulation therein, and partially or totally ...

Photoelectron Imaging of Anions Illustrated by 310 Nm Detachment of F&#8722;

Photoelectron Imaging of Anions Illustrated by 310 Nm Detachment of FÃƒÆ’Ã‚Â¢Ãƒâ€¹Ã¢â‚¬Â '

Anion photoelectron imaging is a very efficient method for the study of energy states of bound negative ions, neutral species and interactions of unbound ...

A Facile Synthetic Method to Obtain Bismuth Oxyiodide Microspheres Highly Functional for the Photocatalytic Processes of Water Depuration

Bismuth oxyhalide (BiOI) is a promising material for sunlight-driven-environmental photocatalysis. Given that the physical structure of this kind of ...