Name: accessing valuable ligand supports for transition metals: a modified, intermediate scale preparation of 1,2,3,4,5-pentamethylcyclopentadiene
Uploaded: 2017-03-20T14:00:00
Description: Watch this Scientific Journal Video about Accessing Valuable Ligand Supports for Transition Metals: A Modified, Intermediate Scale Preparation of 1,2,3,4,5-Pentamethylcyclopentadiene at JoVE.com

We are grateful to the National Science Foundation (CHE-1300508) and Mount St. Mary's University (Startup and Summer Faculty Development) for generous support of this work. Ben Rupert (University of Delaware, Mass Spectrometry Facility) is acknowledged for LIFDI mass spectral analyses.

1. Synthesis of an Isomeric Mixture of 3,4,5-Trimethyl-2,5-heptadien-4-ols
<ol>
	<li>Fill an oven dried, 500 mL beaker with 200 mL of hexanes and cover with an oven dried watch glass.
	<ol>
		<li>In an empty hood, use clean scissors to cut half inch pieces of lithium wire. Wipe each lithium piece on a paper towel to remove excess mineral oil, until all oil appears to be removed from the metal&#39;s surface, and place in the beaker containing hexanes.</li>
		<li>Fill an oven dried, 250 mL beaker with 10...

<ol>
	<li>Kealy, T. J., Pauson, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+type+of+organo-iron+compound.">A new type of organo-iron compound.</a> Nature. 168, 1039-1040 (1951).</li><li>Wilkinson, G., Rosenblum, M., Whiting, M. C., Woodward, R. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+structure+of+iron+bis-cyclopentadienyl.">The structure of iron bis-cyclopentadienyl.</a> J. Am. Chem. Soc. 74, 2125-2126 (1952).</li><li>Fischer, E. O., Pfab, W. Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cyclopentadien-Metallkomplexe,+ein+neuer+Typ+metallorganischer+Verbindungen.">Cyclopentadien-Metallkomplexe, ein neuer Typ metallorganischer Verbindungen.</a> Z. Naturforsch. 76, 377-379 (1952).</li><li>Pauson, P. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ferrocene-how+it+all+began.">Ferrocene-how it all began.</a> J. Organomet. Chem. 637-639, 3-6 (2001).</li><li>Lauher, J. W., Hoffmann, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+and+chemistry+of+bis(cyclopentadienyl)-MLn+complexes.">Structure and chemistry of bis(cyclopentadienyl)-MLn complexes.</a> J. Am. Chem. Soc. 98, 1729-1742 (1976).</li><li>Resa, I., Carmona, E., Gutierrez-Puebla, E., Monge, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Decamethyldizincocene,+a+stable+compound+of+Zn(I)+with+a+Zn-Zn+bond.">Decamethyldizincocene, a stable compound of Zn(I) with a Zn-Zn bond.</a> Science. 305, 1136-1138 (2004).</li><li>Brintzinger, H., Bercaw, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nature+of+so-called+titanocene,+(C10H10Ti)2.">Nature of so-called titanocene, (C10H10Ti)2.</a> J. Am. Chem. Soc. 92, 6182-6185 (1970).</li><li>King, R. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Some+applications+of+metal+carbonyl+anions+in+the+synthesis+of+unusual+organometallic+compounds.">Some applications of metal carbonyl anions in the synthesis of unusual organometallic compounds.</a> Acc. Chem. Res. 3, 417-427 (1970).</li><li>Chirik, P. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Group+4+transition+metal+sandwich+complexes:+still+fresh+after+almost+60+years.">Group 4 transition metal sandwich complexes: still fresh after almost 60 years.</a> Organometallics. 29, 1500-1517 (2010).</li><li>Bengali, A. A., Schultz, R. H., Moore, C. B., Bergman, R. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Activation+of+the+C-H+bonds+in+neopentane+and+neopentane-d12+by+(&#951;5-C5(CH3)5)Rh(CO)2:+Spectroscopic+and+temporal+resolution+of+rhodium-krypton+and+rhodium-alkane+complex+intermediates.">Activation of the C-H bonds in neopentane and neopentane-d12 by (&#951;5-C5(CH3)5)Rh(CO)2: Spectroscopic and temporal resolution of rhodium-krypton and rhodium-alkane complex intermediates.</a> J. Am. Chem. Soc. 116, 9585-9589 (1994).</li><li>Shima, T., Hu, S., Luo, G., Kang, X., Luo, Y., Hou, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dinitrogen+cleavage+and+hydrogenation+by+a+trinuclear+titanium+polyhydride+complex.">Dinitrogen cleavage and hydrogenation by a trinuclear titanium polyhydride complex.</a> Science. 340, 1549-1552 (2013).</li><li>Negishi, E. -. I., Takahashi, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alkene+and+alkyne+complexes+of+zirconocene.+Their+preparation,+structure,+and+novel+transformations.">Alkene and alkyne complexes of zirconocene. Their preparation, structure, and novel transformations.</a> Bull. Chem. Soc. Jpn. 71, 755-769 (1998).</li><li>Rosenthal, U., Burlakov, V. V., Arndt, P., Baumann, W., Spannenberg, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+titancocene+complex+of+bis(trimethylsilyl)acetylene:+Synthesis,+structure,+and+chemistry.">The titancocene complex of bis(trimethylsilyl)acetylene: Synthesis, structure, and chemistry.</a> Organometallics. 22, 884-900 (2003).</li><li>Jordan, R. F., Bradley, P. K., LaPointe, R. E., Taylor, D. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cationic+zirconium+catalysts+for+carbon-carbon+bond+forming+chemistry.">Cationic zirconium catalysts for carbon-carbon bond forming chemistry.</a> New J. Chem. 14, 505-511 (1990).</li><li>Ewen, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Symmetry+rules+and+reaction+mechanisms+of+Ziegler-Natta+catalysts.">Symmetry rules and reaction mechanisms of Ziegler-Natta catalysts.</a> J. Mol. Catal. 128, 103-109 (1998).</li><li>Manriquez, J. M., Bercaw, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+a+dinitrogen+complex+of+bis(pentamethylcyclopentadienyl)zirconium(II).+Isolation+and+protonation+leading+to+the+stoichiometric+reduction+of+dinitrogen+to+hydrazine.">Preparation of a dinitrogen complex of bis(pentamethylcyclopentadienyl)zirconium(II). Isolation and protonation leading to the stoichiometric reduction of dinitrogen to hydrazine.</a> J. Am. Chem. Soc. 96, 6229-6230 (1974).</li><li>Brintzinger, H. H., Bercaw, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bis(pentamethylcyclopentadienyl)titanium(II).+Isolation+and+reactions+with+hydrogen,+nitrogen,+and+carbon+monoxide.">Bis(pentamethylcyclopentadienyl)titanium(II). Isolation and reactions with hydrogen, nitrogen, and carbon monoxide.</a> J. Am. Chem. Soc. 93, 2045-2046 (1971).</li><li>Lehman, M. C., Gary, J. B., Boyle, P. D., Sanford, M. S., Ison, E. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+solvent+and+ancillary+ligands+on+the+catalytic+H/D+exchange+reactivity+of+Cp*IrIII(L)+complexes.">Effect of solvent and ancillary ligands on the catalytic H/D exchange reactivity of Cp*IrIII(L) complexes.</a> ACS Catal. 3, 2304-2310 (2013).</li><li>Pitman, C. L., Finster, O. N. L., Miller, A. J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cyclopentadiene-mediated+hydride+transfer+from+rhodium+complexes.">Cyclopentadiene-mediated hydride transfer from rhodium complexes.</a> Chem. Commun. 52, 9105-9108 (2016).</li><li>Tarantino, K. T., Miller, D. C., Callon, T. A., Knowles, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bond-weakening+catalysis:+Conjugate+aminations+enabled+by+the+soft+homolysis+of+strong+N-H+bonds.">Bond-weakening catalysis: Conjugate aminations enabled by the soft homolysis of strong N-H bonds.</a> J. Am. Chem. Soc. 137, 6440-6443 (2015).</li><li>Bolig, A. D., Brookhart, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Activation+of+sp3+C-H+bonds+with+cobalt(I):+Catalytic+synthesis+of+enamines.">Activation of sp3 C-H bonds with cobalt(I): Catalytic synthesis of enamines.</a> J. Am. Chem. Soc. 129, 14544-14545 (2007).</li><li>Hung-Low, F., Tye, J. W., Cheng, S., Bradley, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=sp2+C-H+activation+of+dimethyl+fumarate+by+a+[(Cp*Co)2-&#181;-(&#951;4:&#951;4-toluene)]+complex.">sp2 C-H activation of dimethyl fumarate by a [(Cp*Co)2-&#181;-(&#951;4:&#951;4-toluene)] complex.</a> Dalton Trans. 41 (26), 8190-8197 (2012).</li><li>Hung-Low, F., Krogman, J. P., Tye, J. W., Bradley, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+more+labile+low+electron+count+Co(I)+sources:+mild,+catalytic+functionalization+of+activated+alkanes+using+a+[(Cp*Co)2-&#181;-(&#951;4:&#951;4-arene)]+complex.">Development of more labile low electron count Co(I) sources: mild, catalytic functionalization of activated alkanes using a [(Cp*Co)2-&#181;-(&#951;4:&#951;4-arene)] complex.</a> Chem. Commun. 48 (3), 368-370 (2012).</li><li>Andjaba, J. M., Tye, J. W., Yu, P., Pappas, I., Bradley, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cp*Co(IPr):+synthesis+and+reactivity+of+an+unsaturated+Co(I)+complex.">Cp*Co(IPr): synthesis and reactivity of an unsaturated Co(I) complex.</a> Chem. Commun. 52, 2469-2472 (2016).</li><li>Fendrick, C. M., Schertz, L. D., Mintz, E. A., Marks, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large-scale+synthesis+of+1,2,3,4,5-pentamethylcyclpentadiene.">Large-scale synthesis of 1,2,3,4,5-pentamethylcyclpentadiene.</a> Inorg. Synth. 29, 193-198 (1992).</li><li>Threlkel, R. S., Bercaw, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Convenient+synthesis+of+alkyltetramethylcyclopentadienes+and+phenyltetramethylcyclopentadiene.">A Convenient synthesis of alkyltetramethylcyclopentadienes and phenyltetramethylcyclopentadiene.</a> J. Organomet. Chem. 136, 1-5 (1977).</li><li>Manriquez, J. M., Fagan, P. J., Schertz, L. D., Marks, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=1,2,3,4,5-pentamethylcyclopentadiene.">1,2,3,4,5-pentamethylcyclopentadiene.</a> Inorg Synth. 28, 317-320 (1990).</li><li>Threlkel, R. S., Bercaw, J. E., Seidler, P. F., Stryker, J. M., Bergman, R. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=1,2,3,4,5-pentamethylcyclopentadiene.">1,2,3,4,5-pentamethylcyclopentadiene.</a> Org. Synth. 65, (1987).</li><li>Koelle, U., Kossakowski, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Di-&#181;-chloro-bis[(&#951;5-pentachlororuthenium(III)],+[Cp*RuCl2]2+and+Di-&#181;-methoxo-bis(&#951;5-pentamethylcyclomethylcyclopentadienyl)+diruthenium(II),+[Cp*RuOMe]2.">Di-&#181;-chloro-bis[(&#951;5-pentachlororuthenium(III)], [Cp*RuCl2]2 and Di-&#181;-methoxo-bis(&#951;5-pentamethylcyclomethylcyclopentadienyl) diruthenium(II), [Cp*RuOMe]2.</a> Inorg. Synth. 29, 225-228 (1992).</li><li>White, C., Yates, A., Maitlis, P. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=&#951;5-pentamethylcyclopentadienyl)rhodium+and+-iridium+compounds.">&#951;5-pentamethylcyclopentadienyl)rhodium and -iridium compounds.</a> Inorg. Synth. 29, 228-234 (1992).</li><li>Andersen, R. A., Blom, R., Boncella, J. M., Burns, C. J., Volden, H. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+thermal+average+molecular+structures+of+bis(pentamethylcyclopentadienyl)magnesium(II),+-calcium(II),+and+-ytterbium(II)+in+the+gas+phase.">The thermal average molecular structures of bis(pentamethylcyclopentadienyl)magnesium(II), -calcium(II), and -ytterbium(II) in the gas phase.</a> Acta Chem. Scand. 41A, 24-35 (1987).</li><li>Gross, J. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Liquid+injection+field+desorption/ionization+of+reactive+transition+metal+complexes.">Liquid injection field desorption/ionization of reactive transition metal complexes.</a> Anal. Bioanal. Chem. 386 (1), 52-58 (2006).</li></ol>

During preparation of the heptadienol mixture, it is important to clean the lithium prior to initiating the reaction with the 2-bromo-2-butene. This is accomplished by wiping off residual mineral oil used for storage on paper towels, to the point that the oil appears fully removed from the surface, and by dissolving any remaining oil in the beaker of hexanes. The hexanes were used as received and not further dried before use in the procedure. Because of both the large scale of the reaction and an excess of lithium used, ...

Since the discovery and structural elucidation of ferrocene in the 1950s,1,2,3,4 cyclopentadienyl (Cp) substituted ligands have played a vital role in the development of organometallic chemistry. These ligands have served as versatile ancillary supports for a range of metals, leading to studies of unusual structure and bonding,5,6,7 the activation and functionalization of small molecules,8,9,10,11,12,13 and catalysis, including olefin polymerization.14,15
The 1,2,3,4,5-pentamethylcyclopentadienyl (Cp*) anion has proven to be a particularly valuable ligand in transition and main group metal chemistry, as the methyl groups impart greater steric protection, increased electron donation by the anionic ligand, and block potential activation of the cyclopentadienyl ring.16,17 The Cp* ligand remains relevant even today, as the anion has recently been utilized to support H/D exchange by Ir(III),18 hydride transfer by Rh,19 and conjugate aminations mediated by Ti(III).20
Our interest in the Cp* ligand stems from the desire to access reactive sources of cobalt(I) for use in small molecule activation.21 These studies have resulted in the generation of both Cp*CoI and Cp*CoIL (L = N-heterocyclic carbene) equivalents for use in sp3 and sp2 C-H bond oxidative addition.22,23,24 As access to our Cp*Co(II) starting materials necessitate significant quantities of 1,2,3,4,5-pentamethylcyclopentadiene, we desired a multigram synthesis of Cp*H, given the substantial commercial cost of the ligand.
Two major methods currently exist for the large scale preparation of Cp*H, each of which presents inherent technical challenges. A procedure developed by Marks and coworkers involves a two-step synthesis of 2,3,4,5-tetramethylcyclopent-2-enone followed by installation of the final methyl group using methyl lithium.25 The synthesis is described on a massive scale, using a 12 L reaction vessel and mechanical stirring, while also requiring sustained low temperature cooling at 0 &#176;C for four days.
An alternative procedure originally developed by Bercaw and coworkers,26 and later adapted by Marks,27 utilizes in situ generation of an alkenyl lithium for nucleophilic attack of ethyl acetate to produce an isomeric mixture of 3,4,5-trimethyl-2,5-heptadien-4-ols followed by acid mediated cyclization to provide Cp*H. The initial reports of this method were performed on a large (3-5 L) scale and required mechanical stirring. In addition, a significant excess of lithium metal was used, complicating quenching and subsequent workup of the intermediate heptadienols. A subsequent revision of the procedure scales down the reaction and the amount of lithium,28 but safe quenching of the reaction mixture remains an issue. Reproducibility in the initiation of the alkenyl lithium, due to differences in lithium source and purity or dryness of the 2-bromo-2-butene reactant are further noted concerns. Given these issues with the commonly used procedures for preparing Cp*H, we looked to develop better access to the ligand on an intermediate scale (30-40 g) which would circumvent use of specialty laboratory glassware and equipment, improve reaction reproducibility and safety, and simplify workup and ligand purification.
Here we report that synthesis of 1,2,3,4,5-pentamethylcyclopentadiene, based on modifications of the existing procedure developed by Bercaw and coworkers. The revised synthesis and purification of the ligand accomplishes the major goals outlined above, while permitting access to substantial amounts (39 g) of Cp*H in good yield (58%). The procedure offers other additional benefits, including a more controlled quench of excess lithium during the production of the intermediate heptadienols and a simplified isolation of Cp*H of adequate purity for subsequent metallation with transition metals. To demonstrate the utility of the prepared ligand, it was used to synthesize two [Cp*MCl2]2 (M = Ir, Ru) complexes. The revised protocol outlined below complements existing procedures and provides a simpler and more accessible entry point into the chemistry of a ubiquitous ancillary ligand support in organometallic chemistry.

<table border="0" cellpadding="0" cellspacing="0" width="573">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Materials</td>
			<td style="width:71px;"></td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Lithium wire (in mineral oil)</td>
			<td style="width:71px;">Aldrich</td>
			<td>278327-100G</td>
			<td style="width:167px;">&#62;98%</td>
		</tr>
		<tr height="84">
			<td height="84" style="height:84px;width:216px;">2-bromo-2-butene (mixture of cis/trans isomers)</td>
			<td style="width:71px;">Acros</td>
			<td>200016-364&#160;&#160;</td>
			<td style="width:167px;">98%, dried over molecular sieves from an oven overnight before use</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Hexanes</td>
			<td style="width:71px;">Millipore</td>
			<td style="width:119px;">HX0299-3</td>
			<td style="width:167px;">GR ACS, used as received</td>
		</tr>
		<tr height="84">
			<td height="84" style="height:84px;width:216px;">Ethyl actetate</td>
			<td style="width:71px;">Millipore</td>
			<td style="width:119px;">EX0240-3</td>
			<td style="width:167px;">GR ACS, dried over molecular sieves from an oven overnight before use</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Ammonium chloride</td>
			<td style="width:71px;">Aldrich</td>
			<td style="width:119px;">213330-2.5kg</td>
			<td style="width:167px;">ACS Reagent</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:216px;">Diethyl ether</td>
			<td style="width:71px;">Millipore</td>
			<td style="width:119px;">EX0190-5</td>
			<td style="width:167px;">GR ACS, collected from a solvent purification system before use</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Magnesium sulfate</td>
			<td style="width:71px;">Aldrich</td>
			<td style="width:119px;">793612-500g</td>
			<td style="width:167px;">Anhydrous, reagent grade</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">p-toluene sulfonic acid monohydrate</td>
			<td style="width:71px;">Fisher</td>
			<td style="width:119px;">A320-500</td>
			<td style="width:167px;">ACS Certified</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Sodium bicarbonate</td>
			<td style="width:71px;">Fisher</td>
			<td style="width:119px;">5233-500</td>
			<td style="width:167px;">ACS Certified</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Sodium carbonate</td>
			<td style="width:71px;">Amresco</td>
			<td style="width:119px;">0585-500g</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Ruthenium (III) chloride trihydrate</td>
			<td style="width:71px;">Pressure Chemical</td>
			<td style="width:119px;">4750</td>
			<td style="width:167px;">40% Metal</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Iridium (III) chloride hydrate</td>
			<td style="width:71px;">Pressure Chemical</td>
			<td style="width:119px;">5730</td>
			<td style="width:167px;">53% Metal</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Methanol</td>
			<td style="width:71px;">Avantor</td>
			<td style="width:119px;">3016-22</td>
			<td style="width:167px;">AR ACS, distilled from Mg before use</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:216px;">Pentane</td>
			<td style="width:71px;">J. T. Baker</td>
			<td style="width:119px;">T007-09</td>
			<td style="width:167px;">&#62;98%, dried with a solvent purification system before use</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Chloroform-d</td>
			<td style="width:71px;">Aldrich</td>
			<td style="width:119px;">151823-150G</td>
			<td style="width:167px;">99.8 atom % D</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Molecular sieves 4&#197;&#160;</td>
			<td style="width:71px;">Aldrich</td>
			<td style="width:119px;">208590-1KG</td>
			<td style="width:167px;">dried in an oven at 140 &#176;C before use&#160;</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Celite 545</td>
			<td style="width:71px;">Acros</td>
			<td style="width:119px;">AC34967-0025</td>
			<td style="width:167px;">dried in an oven at 140 &#176;C before use&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Name</td>
			<td style="width:71px;">Company</td>
			<td style="width:119px;">Catalog Number</td>
			<td style="width:167px;">Comments</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Equipment</td>
			<td style="width:71px;"></td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Schlenk line, with vacuum and inert gas manifolds</td>
			<td style="width:71px;">Custom</td>
			<td style="width:119px;">NA</td>
			<td>Used in Preps 1-4</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Solvent transfer manifold</td>
			<td style="width:71px;">Chemglass</td>
			<td style="width:119px;">AF-0558-01</td>
			<td style="width:167px;">Used in 2.2</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Airfree filter funnel</td>
			<td style="width:71px;">Chemglass</td>
			<td style="width:119px;">AF-0542-22</td>
			<td style="width:167px;">Used in 3.1.3</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;">Glovebox</td>
			<td style="width:71px;">Vacuum Atmospheres</td>
			<td style="width:119px;">OMNI</td>
			<td style="width:167px;">Used in 3.2.2</td>
		</tr>
	</tbody>
</table>

accessing valuable ligand supports for transition metals: a modified, intermediate scale preparation of 1,2,3,4,5-pentamethylcyclopentadiene

A reliable, intermediate scale preparation of 1,2,3,4,5-pentamethylcyclopentadiene (Cp*H) is presented, based on modifications of existing protocols that derive from initial 2-bromo-2-butene lithiation followed by acid mediated dienol cyclization. The revised synthesis and purification of the ligand avoids the use of mechanical stirring while still permitting access to significant quantities (39 g) of Cp*H in good yield (58%). The procedure offers other additional benefits, including a more controlled quench of excess lithium during the production of the intermediate heptadienols and a simplified isolation of Cp*H of sufficient purity for metallation with transition metals. The ligand was subsequently used to synthesize [Cp*MCl2]2 complexes of both iridium and ruthenium to demonstrate the utility of the Cp*H prepared and purified by our method. The procedure outlined herein affords substantial quantities of a ubiquitous ancillary ligand support used in organometallic chemistry while minimizing the need for specialized laboratory equipment, thus providing a simpler and more accessible entry point into the chemistry of 1,2,3,4,5-pentamethylcyclopentadiene.

The protocol described above for Cp*H synthesis relies on modification of the three step procedure developed by Bercaw and coworkers and modified by Marks (Figure 1). The air sensitive alkenyl lithium is prepared in situ from a mixture of cis and trans-2-butene via a lithium/halogen exchange reaction and is subsequently quenched with ethyl acetate to prepare an isomeric mixture of heptadienols. The mixture can be used without further purificatio...

Watch this Scientific Journal Video about Accessing Valuable Ligand Supports for Transition Metals: A Modified, Intermediate Scale Preparation of 1,2,3,4,5-Pentamethylcyclopentadiene at JoVE.com

Accessing Valuable Ligand Supports for Transition Metals: A Modified, Intermediate Scale Preparation of 1,2,3,4,5-Pentamethylcyclopentadiene

Reliable, intermediate scale preparation of 1,2,3,4,5-pentamethylcyclopentadiene (Cp*H) is presented. The revised protocol for the synthesis and purification of the ligand minimizes the need for specialized laboratory equipment while simplifying reaction workups and product purification. Use of Cp*H in the synthesis of [Cp*MCl2]2 complexes (M = Ru, Ir) is also described.

A reliable, intermediate scale preparation of 1,2,3,4,5-pentamethylcyclopentadiene (Cp*H) is presented, based on modifications of existing protocols that ...

Research

Education

JoVE Journal

JoVE Core

Organic Chemistry

Chemistry

Unit 1

Reactions of Alkenes

SCIENTISTS IN ACTION

Bio-layer Interferometry for Measuring Kinetics of Protein-protein Interactions and Allosteric Ligand Effects

We describe the use of Bio-layer Interferometry to study inhibitory interactions of subunit &#949;&#160;with the catalytic complex of Escherichia ...

Transport of Surface-modified Carbon Nanotubes through a Soil Column

Carbon nanotubes (CNTs) are widely manufactured nanoparticles, which are being utilized in a number of consumer products, such as sporting goods, ...

Synthesis of Ligand-free CdS Nanoparticles within a Sulfur Copolymer Matrix

Aliphatic ligands are typically used during the synthesis of nanoparticles to help mediate their growth in addition to operating as high-temperature ...

Sulfate Separation by Selective Crystallization with a Bis-iminoguanidinium Ligand

A simple and effective method for selective sulfate separation from aqueous solutions by crystallization with a bis-guanidinium ligand, ...

Preparation and Evaluation of 99mTc-labeled Tridentate Chelates for Pre-targeting Using Bioorthogonal Chemistry

Preparation and Evaluation of 99mTc-labeled Tridentate Chelates for Pre-targeting Using Bioorthogonal Chemistry

Pre-targeting combined with bioorthogonal chemistry is emerging as an effective way to create new radiopharmaceuticals. Of the methods available, the ...

Deposition of Porous Sorbents on Fabric Supports

A microwave deposition technique for silanes, previously described for production of oleophobic fabrics, is adapted to provide a fabric support material ...

Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction

Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction

This protocol presents both the synthesis method of the Ni single atom catalyst, and the electrochemical testing of its catalytic activity and selectivity ...

Ligand-Mediated Nucleation and Growth of Palladium Metal Nanoparticles

The size, size distribution and stability of colloidal nanoparticles are greatly affected by the presence of capping ligands. Despite the key contribution ...

Microfluidic Preparation of Liquid Crystalline Elastomer Actuators

This paper focuses on the microfluidic process (and its parameters) to prepare actuating particles from liquid crystalline elastomers. The preparation ...

Gold Nanoparticle Modified Carbon Fiber Microelectrodes for Enhanced Neurochemical Detection

For over 30 years, carbon-fiber microelectrodes (CFMEs) have been the standard for neurotransmitter detection. Generally, carbon fibers are aspirated into ...