JoVE Logo
Faculty Resource Center

Sign In

Determining Tribocorrosion Rate and Wear-Corrosion Synergy of Bulk and Thin Film Aluminum Alloys

DOI :

10.3791/58235-v

7:12 min

September 11th, 2018

September 11th, 2018

10,686 Views

1Department of Mechanical Engineering, University of South Florida, 2Department of Materials Science and Engineering, Virginia Polytechnic Institute and State University, 3Department of Civil and Environmental Engineering, University of South Florida

Here, we present a protocol to measure the tribocorrosion rate and wear-corrosion synergy of thin film and bulk Al alloys in simulated sea water at room temperature.

Tags

Tribocorrosion Rate

-- Views

Related Videos

article

Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon

article

Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

article

Author Spotlight: Introduction to Active Probe Atomic Force Microscopy with Quattro-Parallel Cantilever Arrays

article

Author Spotlight: Advancements and Applications in Nanoparticle Synthesis Through Laser Ablation in Liquids

article

Advances in Nanoscale Infrared Spectroscopy to Explore Multiphase Polymeric Systems

article

Author Spotlight: Enhancing Fiber Composite Laminate Quality with the Wet Hand Lay-Up/Vacuum Bag Process

article

Real-Time Imaging of Bonding in 3D-Printed Layers

article

Author Spotlight: Revolutionizing Microfluidics Through Microchannel Fabrication on Nanopaper

article

Author Spotlight: Developing Cost-Effective and Customizable Balloon Tags for Fish Passage Studies

article

Author Spotlight: Design and Evaluation of Au-Electroplated Carbon Fiber Cloth Electrodes for Hydrogen Peroxide Fuel Cells

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2024 MyJoVE Corporation. All rights reserved