Yazarlar profesör Yu Feng, Dr. Jenna Briddell, Ian Woodward ve Lucas Attia'ya yardımcı tartışmaları için teşekkür ediyor.

1. 3D baskılı deneysel bileşenlerin hazırlanması
NOT: Protokolde kullanılan tüm yazılımlar Malzeme Tablosunda belirtilmiştir. Ayrıca, kullanılan dilimleme yazılımı Malzeme Tablosundalistelenen 3D yazıcıya özgüdür; ancak, bu protokol çok çeşitli stereolitografi (SLA) 3D yazıcılara genişletilebilir.
<ol><li>Hasta CT taramalarını 3D nesnelere (.stl dosyaları) dönüştürün. NOT: Bu çalışmalarda kullanılan spesifik akciğer ...

<ol>
	<li>Goel, A., Baboota, S., Sahni, J. K., Ali, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exploring+targeted+pulmonary+delivery+for+treatment+of+lung+cancer.">Exploring targeted pulmonary delivery for treatment of lung cancer.</a> International Journal of Pharmaceutical Investigation. 3 (1), 8-14 (2013).</li><li>Kleinstreuer, C., Zhang, Z., Li, Z., Roberts, W. L., Rojas, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+methodology+for+targeting+drug-aerosols+in+the+human+respiratory+system.">A new methodology for targeting drug-aerosols in the human respiratory system.</a> International Journal of Heat and Mass Transfer. 51 (23), 5578-5589 (2008).</li><li>Feng, Y., Chen, X., Yang, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+In+Silico+Investigation+of+a+Lobe-Specific+Targeted+Pulmonary+Drug+Delivery+Method.">An In Silico Investigation of a Lobe-Specific Targeted Pulmonary Drug Delivery Method.</a> Design of Medical Devices Conference. , (2018).</li><li>Marple, V. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Next+generation+pharmaceutical+impactor+(a+new+impactor+for+pharmaceutical+inhaler+testing).+Part+I:+Design.">Next generation pharmaceutical impactor (a new impactor for pharmaceutical inhaler testing). Part I: Design.</a> Journal of Aerosol Medicine. 16 (3), 283-299 (2003).</li><li>Feng, Y., Zhao, J., Chen, X., Lin, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+In+Silico+Subject-Variability+Study+of+Upper+Airway+Morphological+Influence+on+the+Airflow+Regime+in+a+Tracheobronchial+Tree.">An In Silico Subject-Variability Study of Upper Airway Morphological Influence on the Airflow Regime in a Tracheobronchial Tree.</a> Bioengineering. 4 (4), 90 (2017).</li><li>Huynh, B. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Development+and+Validation+of+an+In+Vitro+Airway+Model+to+Assess+Realistic+Airway+Deposition+and+Drug+Permeation+Behavior+of+Orally+Inhaled+Products+Across+Synthetic+Membranes.">The Development and Validation of an In Vitro Airway Model to Assess Realistic Airway Deposition and Drug Permeation Behavior of Orally Inhaled Products Across Synthetic Membranes.</a> Journal of Aerosol Medicine and Pulmonary Drug Delivery. 31 (2), 103-108 (2018).</li><li>Lizal, F., Elcner, J., Hopke, P. K., Jedelsky, J., Jicha, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+realistic+human+airway+model.">Development of a realistic human airway model.</a> Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 226 (3), 197-207 (2011).</li><li>Wei, X., Hindle, M., Delvadia, R. R., Byron, P. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+Vitro+Tests+for+Aerosol+Deposition.+V:+Using+Realistic+Testing+to+Estimate+Variations+in+Aerosol+Properties+at+the+Trachea.">In Vitro Tests for Aerosol Deposition. V: Using Realistic Testing to Estimate Variations in Aerosol Properties at the Trachea.</a> Journal of Aerosol Medicine and Pulmonary Drug Delivery. 30 (5), 339-348 (2017).</li><li>Kolewe, E. L., Feng, Y., Fromen, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Realizing+Lobe-Specific+Aerosol+Targeting+in+a+3D-Printed+In+Vitro+Lung+Model.">Realizing Lobe-Specific Aerosol Targeting in a 3D-Printed In Vitro Lung Model.</a> Journal of Aerosol Medicine and Pulmonary Drug Delivery. , (2020).</li><li>Sul, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessing+Airflow+Sensitivity+to+Healthy+and+Diseased+Lung+Conditions+in+a+Computational+Fluid+Dynamics+Model+Validated+In+Vitro.">Assessing Airflow Sensitivity to Healthy and Diseased Lung Conditions in a Computational Fluid Dynamics Model Validated In Vitro.</a> Journal of Biomechanical Engineering. 140 (5), (2018).</li><li>Martonen, T. B., Katz, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deposition+Patterns+of+Polydisperse+Aerosols+Within+Human+Lungs.">Deposition Patterns of Polydisperse Aerosols Within Human Lungs.</a> Journal of Aerosol Medicine. 6 (4), 251-274 (1993).</li><li>Nahar, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro,+in+vivo+and+ex+vivo+models+for+studying+particle+deposition+and+drug+absorption+of+inhaled+pharmaceuticals.">In vitro, in vivo and ex vivo models for studying particle deposition and drug absorption of inhaled pharmaceuticals.</a> European Journal of Pharmaceutical Sciences. 49 (5), 805-818 (2013).</li><li>Nichols, S. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Multi-laboratory+in+Vitro+Study+to+Compare+Data+from+Abbreviated+and+Pharmacopeial+Impactor+Measurements+for+Orally+Inhaled+Products:+a+Report+of+the+European+Aerosol+Group+(EPAG).">A Multi-laboratory in Vitro Study to Compare Data from Abbreviated and Pharmacopeial Impactor Measurements for Orally Inhaled Products: a Report of the European Aerosol Group (EPAG).</a> AAPS PharmSciTech. 17 (6), 1383-1392 (2016).</li><li>Yoshida, H., Kuwana, A., Shibata, H., Izutsu, K. I., Goda, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+Aerodynamic+Particle+Size+Distribution+Between+a+Next+Generation+Impactor+and+a+Cascade+Impactor+at+a+Range+of+Flow+Rates.">Comparison of Aerodynamic Particle Size Distribution Between a Next Generation Impactor and a Cascade Impactor at a Range of Flow Rates.</a> AAPS PharmSciTech. 18 (3), 646-653 (2017).</li><li>Feng, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+in+silico+inter-subject+variability+study+of+extra-thoracic+morphology+effects+on+inhaled+particle+transport+and+deposition.">An in silico inter-subject variability study of extra-thoracic morphology effects on inhaled particle transport and deposition.</a> Journal of Aerosol Science. 123, 185-207 (2018).</li><li>Kleinstreuer, C., Seelecke, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inhaler+system+for+targeted+maximum+drug-aerosol+delivery.">Inhaler system for targeted maximum drug-aerosol delivery.</a> United States patent. , (2005).</li><li>. How Medical 3D Printing is Gaining Ground in Top Hospitals Available from: <a target="_blank" href="https://www.materialise.com/en/blog/3d-printing-hospitals">https://www.materialise.com/en/blog/3d-printing-hospitals</a> (2019)</li><li>Weber, P. W., Price, O. T., McClellan, G. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Demographic+Variability+of+Inhalation+Mechanics:+A+Review.">Demographic Variability of Inhalation Mechanics: A Review.</a> Defense Threat Reduction Agency. , (2016).</li><li>Jiang, Y. Y., Xu, X., Su, H. L., Liu, D. X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gender-related+difference+in+the+upper+airway+dimensions+and+hyoid+bone+position+in+Chinese+Han+children+and+adolescents+aged+6-18+years+using+cone+beam+computed+tomography.">Gender-related difference in the upper airway dimensions and hyoid bone position in Chinese Han children and adolescents aged 6-18 years using cone beam computed tomography.</a> Acta Odontologica Scandinavica. 73 (5), 391-400 (2015).</li><li>Martin, S. E., Mathur, R., Marshall, I., Douglas, N. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+age,+sex,+obesity+and+posture+on+upper+airway+size.">The effect of age, sex, obesity and posture on upper airway size.</a> European Respiratory Journal. 10 (9), 2087 (1997).</li><li>Xi, J., Longest, P. W., Martonen, T. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+the+laryngeal+jet+on+nano-+and+microparticle+transport+and+deposition+in+an+approximate+model+of+the+upper+tracheobronchial+airways.">Effects of the laryngeal jet on nano- and microparticle transport and deposition in an approximate model of the upper tracheobronchial airways.</a> Journal of Applied Physiology. 104 (6), 1761-1777 (2008).</li><li>Zhao, J., Feng, Y., Fromen, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glottis+motion+effects+on+the+particle+transport+and+deposition+in+a+subject-specific+mouth-to-trachea+model:+A+CFPD+study.">Glottis motion effects on the particle transport and deposition in a subject-specific mouth-to-trachea model: A CFPD study.</a> Computers in Biology and Medicine. 116, 103532 (2020).</li><li>Kim, S. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chronic+obstructive+pulmonary+disease:+lobe-based+visual+assessment+of+volumetric+CT+by+Using+standard+images--comparison+with+quantitative+CT+and+pulmonary+function+test+in+the+COPDGene+study.">Chronic obstructive pulmonary disease: lobe-based visual assessment of volumetric CT by Using standard images--comparison with quantitative CT and pulmonary function test in the COPDGene study.</a> Radiology. 266 (2), 626-635 (2013).</li><li>. The Cancer Imaging Archive Available from: <a target="_blank" href="https://www.cancerimagingarchive.net/">https://www.cancerimagingarchive.net/</a> (2020)</li><li>Li, A., Ahmadi, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Computer+Simulation+of+Deposition+of+Aerosols+in+a+Turbulent+Channel+Flow+with+Rough+Walls.">Computer Simulation of Deposition of Aerosols in a Turbulent Channel Flow with Rough Walls.</a> Aerosol Science and Technology. 18 (1), 11-24 (1993).</li><li>Khalili, S. F., Ghanbarzadeh, S., Nokhodchi, A., Hamishehkar, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+different+coating+materials+on+the+prevention+of+powder+bounce+in+the+next+generation+impactor.">The effect of different coating materials on the prevention of powder bounce in the next generation impactor.</a> Research in Pharmaceutical Sciences. 13 (3), 283-287 (2018).</li><li>Galliger, Z., Vogt, C. D., Panoskaltsis-Mortari, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+bioprinting+for+lungs+and+hollow+organs.">3D bioprinting for lungs and hollow organs.</a> Translational Research. 211, 19-34 (2019).</li><li>Schwarz, K., Biller, H., Windt, H., Koch, W., Hohlfeld, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+exhaled+particles+from+the+healthy+human+lung--a+systematic+analysis+in+relation+to+pulmonary+function+variables.">Characterization of exhaled particles from the healthy human lung--a systematic analysis in relation to pulmonary function variables.</a> Journal of Aerosol Medicine and Pulmonary Drug Delivery. 23 (6), 371-379 (2010).</li><li>Patton, J. S., Byron, P. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inhaling+medicines:+delivering+drugs+to+the+body+through+the+lungs.">Inhaling medicines: delivering drugs to the body through the lungs.</a> Nature Reviews Drug Discovery. 6 (1), 67-74 (2007).</li><li>Zhang, Z., Kleinstreuer, C., Kim, C. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cyclic+micron-size+particle+inhalation+and+deposition+in+a+triple+bifurcation+lung+airway+model.">Cyclic micron-size particle inhalation and deposition in a triple bifurcation lung airway model.</a> Journal of Aerosol Science. 33 (2), 257-281 (2002).</li><li>Ju, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+of+Nebulized+Metal-Phenolic+Capsules+for+Controlled+Pulmonary+Deposition.">Engineering of Nebulized Metal-Phenolic Capsules for Controlled Pulmonary Deposition.</a> Advanced Science. 7 (6), 1902650 (2020).</li></ol>

Yazarların açıklayacak bir şeyi yok.

Tam bir inhalasyon dozunun pulmoner farmasötik testi için mevcut son teknoloji cihaz, bir aerosolün aerodinamik çapını ölçen Next Generator Impactor'dur(NGI). Bu boyutlandırma verileri daha sonra sağlıklı bir yetişkin erkek için geliştirilen bir korelasyona dayanarak aerosolin çökeceği akciğer neslini tahmin etmek için kullanılır11. Ne yazık ki, bu yöntem bölgesel akciğer birikimindeki farklılıkları değerlendirme, hastalık koşullarının farm...

Akciğer kanseri ve kronik obstrüktif akciğer hastalığı (KOAH) gibi birçok akciğer hastalığı hastalık özelliklerinde bölgesel farklılıklar göstermektedir; bununla birlikte, akciğerin sadece hastalıklı bölgelerine ilaç verilmesini hedeflemek için terapötik tekniklerin eksikliğivardır 1. Birden fazla hesaplamalı akışkan dinamiği (CFD) modeli, akciğer 2,3'teki belirli düzenleri tanımlayarak ilaç biriktirme profillerini modüleetmeninmümkün olduğunu göstermiştir. Hastalıklı akciğer bölgelerine aerosol dağılımını kontrol etmek için laboratuvarımızda bölgesel hedefleme yeteneklerine sahip hem inhalatörlerin hem de endotrakeal (ET) tüp adaptörlerinin geliştirilmesi devam etmektedir. Bu ilkelerin klinik kullanıma genişletilmesi mevcut preklinik test kapasitesi ile sınırlıdır. Bir ilacın akciğer içinde biriktirdİğİ kesin konum, etkinliğin en iyi tahmincisi olarak bilinir; bununla birlikte, solunabilir terapötiklerin mevcut farmasötik değerlendirmeleri en sık parçacık boyutunun in vitro-in vivo korelasyonları kullanılarak sadece yaklaşık biriktirme4kullanılarak tahmin edilmektedir. Bu teknik, farklı hava yolu geometrilerinin akciğerin çeşitli lobları aracılığıyla bölgesel dağılım üzerindeki etkilerini belirlemek için herhangi bir mekansal analize izin vermez. Ek olarak, bu test anatomik olarak doğru akciğer geometrilerinden yoksun, araştırmacıların gösterdiği biriktirme profilleri üzerinde önemli bir etkisi olabilir5. Hastaya özgü akciğer geometrilerinin üst hava yollarının eklenmesi yoluyla test protokollerine dahil etmek için bazı çabalar yapılmıştır; bununla birlikte, bu yaklaşımların çoğu her akciğer lob6,7,8yerine akciğerin çeşitli nesillerine aerosol iletimini örnekler. Aşağıdaki protokol, akciğer9'unbeş lobunun her birinde bağıl parçacık birikimini ölçme kapasitesine sahip hastaya özgü akciğer modelleri üretmek için yüksek verimli bir yöntem sunar.
Anatomik olarak doğru model akciğerler 3D baskı hasta bilgisayarlı tomografi (BT) taramaları ile üretilir. Kolayca monte edilmiş bir akış sistemi ile birlikte kullanıldığında, model akciğer loblarının her biri aracılığıyla göreli akış hızları bağımsız olarak kontrol edilebilir ve farklı hasta demografisi ve/ veya hastalık durumlarını taklit etmek için uyarlanabilir. Bu yöntemle araştırmacılar, potansiyel terapötik yöntemlerin etkinliğini ilgili bir akciğer geometrisinde test edebilir ve her yöntemin performansını hastalıklı morfolojinin ilerlemesiyle ilişkilendirebilir. Burada laboratuvarımızda geliştirilen iki cihaz tasarımı, ağızda veya trakeadaki aerosol salınımının yerini kontrol ederek istenilen akciğer lobunda birikimi artırma yetenekleri açısından test edilmektedir. Bu protokol ayrıca, o hastanın BT tarama verilerine özgü bir model akciğerde tedavi etkinliğinin hızlı tahminini kolaylaştırarak hastalar için kişiselleştirilmiş prosedürlerin gelişimini önemli ölçüde etkileme potansiyeline sahiptir.

<table>
	<tbody>
		<tr>
			<td>1/4&#34; Plastic Barbed Tube Fitting</td>
			<td>McMaster Carr</td>
			<td>5372K111</td>
			<td></td>
		</tr>
		<tr>
			<td>10 um Filter Paper</td>
			<td>Fisher</td>
			<td>1093-110</td>
			<td></td>
		</tr>
		<tr>
			<td>1um Fluorescent Polystyrene Particles</td>
			<td>Polysciences</td>
			<td>15702-10</td>
			<td></td>
		</tr>
		<tr>
			<td>1um Non-Fluorescent Polystyrene Particles</td>
			<td>Polysciences</td>
			<td>8226</td>
			<td></td>
		</tr>
		<tr>
			<td>2-Propanol</td>
			<td>Fisher</td>
			<td>A516-4</td>
			<td>Referred to in protocol as &#34;IPA&#34;</td>
		</tr>
		<tr>
			<td>3/8&#34; Plastic Barbed Tube Fitting</td>
			<td>McMaster Carr</td>
			<td>5372K117</td>
			<td></td>
		</tr>
		<tr>
			<td>Air Flow Meter (1 - 280 mL/min)</td>
			<td>McMaster Carr</td>
			<td>41695K32</td>
			<td>Referred to in protocol as &#34;flow meter&#34;</td>
		</tr>
		<tr>
			<td>Carbon M1 3D Printer</td>
			<td>Carbon 3D</td>
			<td></td>
			<td>https://www.carbon3d.com/, Associated software referred to in protocol as &#34;slicing software&#34;</td>
		</tr>
		<tr>
			<td>Collison Jet Nebulizer</td>
			<td>CH Technologies</td>
			<td>ARGCNB0008 (CN-25)</td>
			<td>6 Jet MRE style horizontal collision with glass jar, Referred to in protocol as &#34;nebulizer&#34;, http://chtechusa.com/Manuals/MRE_Collison_Manual.pdf</td>
		</tr>
		<tr>
			<td>Convection Oven</td>
			<td>Yamato</td>
			<td>DKN602</td>
			<td></td>
		</tr>
		<tr>
			<td>Copley Critical Flow Controller TPK2000 Reve 120V</td>
			<td>MSP Corp</td>
			<td>0001-01-9810</td>
			<td>Referred to in protocol as &#34;flow controller&#34;</td>
		</tr>
		<tr>
			<td>Copley High Capacity Pump Model HCP5</td>
			<td>MSP Corp</td>
			<td>0001-01-9982</td>
			<td>Referred to in protocol as &#34;vacuum pump&#34;</td>
		</tr>
		<tr>
			<td>Cytation</td>
			<td>BioTek</td>
			<td>CYT5MPV</td>
			<td>Multifunctional Spectrophotometer/Fluorescent imager equiped with 4x/20x/40x objectives and DAPI/GFP/TexasRed laser/filter cubes</td>
		</tr>
		<tr>
			<td>EPU40 Resin</td>
			<td>Carbon 3D</td>
			<td></td>
			<td>https://www.carbon3d.com/materials/epu-elastomeric-polyurethane/, Referred to in protocol as &#34;soft resin&#34;</td>
		</tr>
		<tr>
			<td>Filter for vacuum pump</td>
			<td>Whatman</td>
			<td>6722-5000</td>
			<td></td>
		</tr>
		<tr>
			<td>Flow Meter Model DFM 2000</td>
			<td>MSP Corp</td>
			<td>0001-01-8764</td>
			<td>Referred to in protocol as &#34;electronic flow meter&#34;</td>
		</tr>
		<tr>
			<td>ImageJ Software</td>
			<td>ImageJ</td>
			<td></td>
			<td>https://imagej.nih.gov/ij/download.html</td>
		</tr>
		<tr>
			<td>Inline Air Flow Control Valve (Push-to-Connect)</td>
			<td>McMaster Carr</td>
			<td>62005K333</td>
			<td>Referred to in protocol as &#34;valve&#34;</td>
		</tr>
		<tr>
			<td>Inline Filter Devices</td>
			<td>Whatman</td>
			<td>WHA67225000</td>
			<td></td>
		</tr>
		<tr>
			<td>Marine-Grade Plywood Sheet</td>
			<td>McMaster Carr</td>
			<td>62005K333</td>
			<td>Referred to in protocol as &#34;wooden board&#34;</td>
		</tr>
		<tr>
			<td>Materialise Mimics Software</td>
			<td>Materialise</td>
			<td></td>
			<td>https://www.materialise.com/en/medical/mimics-innovation-suite, Referred to in protocol as &#34;CT scan software&#34;</td>
		</tr>
		<tr>
			<td>Meshmixer Software</td>
			<td>Autodesk</td>
			<td></td>
			<td>http://www.meshmixer.com/, Referred to in protocol as &#34;mesh editing software&#34;</td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Fisher</td>
			<td>A454-4</td>
			<td></td>
		</tr>
		<tr>
			<td>Opticure LED Cube</td>
			<td>APM Technica</td>
			<td>102843</td>
			<td>Referred to in protocol as &#34;UV oven&#34;</td>
		</tr>
		<tr>
			<td>PR25 Resin</td>
			<td>Carbon 3D</td>
			<td></td>
			<td>https://www.carbon3d.com/materials/uma-urethanemethacrylate, /Referred to in protocol as &#34;hard resin&#34;</td>
		</tr>
		<tr>
			<td>PVC Tube for Chemicals</td>
			<td>McMaster Carr</td>
			<td>5231K161</td>
			<td>1/4&#34; ID</td>
		</tr>
		<tr>
			<td>Screws</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>SolidWorks Software</td>
			<td>Dassault Syst&#232;mes&#160;SolidWorks Corporation</td>
			<td></td>
			<td>https://www.solidworks.com/, Referred to in protocol as &#34;3D modeling software&#34;</td>
		</tr>
		<tr>
			<td>Straight Flow Rectangular Manifold</td>
			<td>McMaster Carr</td>
			<td>1125T31</td>
			<td></td>
		</tr>
		<tr>
			<td>Tubing to Flow Controller</td>
			<td>McMaster Carr</td>
			<td>5233K65</td>
			<td>3/8&#34; ID</td>
		</tr>
		<tr>
			<td>Wire</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
	</tbody>
</table>

evaluating regional pulmonary deposition using patient-specific 3d printed lung models

Pulmoner hastalıklar için hedefe yönelik tedavilerin geliştirilmesi, bölgesel aerosol doğumunun öngörülebilmesi ile preklinik test yöntemlerinin mevcudiyeti ile sınırlıdır. Hastaya özgü akciğer modelleri oluşturmak için 3D baskıdan yararlanarak, lobuler pulmoner birikimi ölçmek için yüksek verimli, in vitro deneysel bir kurulumun tasarımını özetliyoruz. Bu sistem, piyasada bulunan ve 3D baskılı bileşenlerin bir kombinasyonu ile yapılır ve akciğerin her lobunun akış hızının bağımsız olarak kontrol edilmesine izin verir. Floresan aerosollerin her loba teslimi floresan mikroskopi kullanılarak ölçülür. Bu protokol, çok çeşitli hasta demografisini ve hastalık durumlarını modelleme yeteneği ile solunum yolu hastalıkları için kişiselleştirilmiş tıbbın büyümesini teşvik etme potansiyeline sahiptir. Hem 3D baskılı akciğer modelinin geometrisi hem de hava akış profili ayarı, değişen yaş, ırk ve cinsiyete sahip hastalar için klinik verileri yansıtacak şekilde kolayca modüle edilebilir. Burada gösterilen endotrakeal tüp gibi klinik olarak ilgili ilaç dağıtım cihazları, bir cihazın akciğerin hastalıklı bir bölgesine terapötik teslimatı hedefleme kapasitesini daha doğru tahmin etmek için test kurulumuna dahil edilebilir. Bu deneysel kurulumun çok yönlülüğü, çok sayıda inhalasyon koşullarını yansıtacak şekilde özelleştirilmesini sağlar ve klinik öncesi terapötik testlerin titizliğini artırır.

Bu boyut aralığındaki (1-5 μm) ve akış koşullarındaki (1-10 L/dk) parçacıklar, hem teorik Stokes sayılarına hem de in vivo verilerine göre akışkan akışı çizgilerini takip eder; bu nedenle, hedeflenen bir teslimat cihazının yokluğunda, akciğer modeline salınan parçacıkların, her loba yönlendirilen toplam hava akışının yüzdesine göre birikmesi beklenir. Daha sonra her loba göreli miktarda partikül iletimi, hastaya özgü yüksek çözünürlüklü bilgisayarlı tomografi (HRCT) taramalar...

Watch this Scientific Journal Video about Evaluating Regional Pulmonary Deposition using Patient-Specific 3D Printed Lung Models at JoVE.com

Evaluating Regional Pulmonary Deposition using Patient-Specific 3D Printed Lung Models

Ayarlanabilir hava akış profillerine sahip CT tarama türevli, 3D baskılı akciğer modellerini kullanarak lob seviyesinde bölgesel pulmoner birikimi ölçmek için yüksek verimli, in vitro bir yöntem sunuyoruz.

Hastaya Özgü 3D Baskılı Akciğer Modelleri Kullanılarak Bölgesel Pulmoner Birikimin Değerlendirilmesi

Development of targeted therapies for pulmonary diseases is limited by the availability of preclinical testing methods with the ability to predict ...

This protocol has the potential to drive the development of new targeted pulmonary therapeutics by enabling the pre-clinical predictions of regional deposition. This technique incorporates anatomically accurate lung models, 3D printed from patient's CT scans for the rapid generation of personalized predictive results regarding the efficacy of potential treatments. This technique can be used to develop targeted therapies that minimize off target effects for diseases that are characterized by regional area obstructions such as lung cancer or COPD.After printing the experimental components and completing post-processing as per the manufacturer's instructions, carefully wash the parts printed in soft resin with at least 99%purity isopropyl alcohol to remove any excess uncured resin before thermal curing the parts in a convection oven for eight hours according to the manufacturer's specifications. Then, wash the parts printed in hard resin with the alcohol to remove any excess uncured resin and cure the parts in a UV oven for one minute per side. For lobe outlet cap assembly, insert one end of the oval barbed tubing connection base into the cap before carefully stretching the flexible cap over the other end of the oval base, taking special care not to crack the thin base and with the nozzle protruding through the opening in the cap base.Next, cut 10 microliter filter paper to a size slightly larger than the outlet area and fold the filter paper over the lobe outlet, holding the paper in place with one hand. Then use tweezers in the other hand, to stretch the cap with the barbed tubing connection over the outlet and press the cap down until the notch matches the corresponding notch on the lobe outlet. Before each experimental run, connect each lung model lobe outlet to the tubing of the corresponding flow meter and valve taking care not to apply too much lateral pressure to the barbed tubing connection.Attach the electronic flow meter to the lung model mouth inlet to measure the total airflow rate to the lung model and turn on the flow controller and vacuum pump. In the flow controller, select the test setup setting and slowly increase the flow rate until the electronic flow meter displays the desired total flow rate. Use the valves to adjust the flow rate through the right upper, right middle, right lower, left upper and left lower lung lobes.Once the load flow rates shown on the flow meters are steady at the desired value, check the overall flow rate again on the electronic flow meter to verify that there are no leaks in the system. Then, exit the test setup in the flow controller leaving the vacuum pump on. For aerosol delivery to the lung model, fill a nebulizer with a solution of the desired fluorescent particles and connect the nebulizer to the lung model inlet.To measure the efficacy of the targeting device, insert the device into the lung model and connect the nebulizer to the device. Connect the compressed airline to the nebulizer. Set the flow controller to run for one ten second trial and open the compressed air valve slightly to begin generating an aerosol within the nebulizer.Press start on the flow controller and immediately open the compressed air valve fully. When the flow controller reaches about nine seconds, begin closing the compressed air valve and close the fume hood sash as much as possible. Once the valve is fully closed, disconnect the nebulizer from the compressed airline.Fully close the fume hood sash, shut off the vacuum pump and let any aerosols clear from the fume hood. After about 10 minutes, disconnect the lung model from the tubing system, taking care not to crack the barbed tubing connections and run a pair of tweezers under the edge of each lobe outlet cap to remove the caps from the outlets. Then transfer the filter paper from each cap into individual wells of a 24-well plate particle depositions side down.When all of the filter paper has been collected, place the plate onto the stage of a digital fluorescence microscope and set the microscope to a 4X magnification and the appropriate fluorescence channel. Then take at least three images of the filter paper from each lobe at random locations and save the images as TIF files. Under one liter per minute collection conditions in a healthy lung, ended along effected by COPD, the experimentally determined deposition profile is not statistically different from the clinical data demonstrating that the setup accurately mimics the distribution of air flow to each of the lung lobes.Compared to the non-targeted particle deposition profile, the use of a modified endotracheal tube generates a nearly four fold increase in left lower lobe delivery. In addition to diverting over 96%of the delivered particles to the left lung. Altering the release location setting to target the right lower lobe, this device generates more than double the particle delivery to the right lobe and diverts 94%of the delivered particles to the right lung.Compared to the non-targeted particle deposition profile, the concentric cylinder device causes a nearly three fold increase in left upper lobe delivery in addition to diverting over 87%of the delivered particles to the left lung. Targeting efficiency can also be observed qualitatively by comparing the images of the target lobe filter to the other outlet filters. As illustrated, the most effective targeting method will yield a high particle deposition at the intended lobe of interest and a low deposition at the remaining lobe outlets.It is essential to make sure that components are properly connected to prevent leaks within the system as leaks will impact deposition results. This protocol permits researchers to test potential drug delivery devices for targeting specific regions of the lung prior to clinical trials reducing the cost associated with drug development and efficacy enhancement in human patients.

evaluating-regional-pulmonary-deposition-using-patient-specific-3d

Research

JoVE Journal

Bioengineering

4.1K Views.  University of Delaware. This protocol has the potential to drive the development of new targeted pulmonary therapeutics by enabling the pre-clinical predictions of regional deposition. This technique incorporates anatomically accurate lung models, 3D printed from patient's CT scans for the rapid generation of personalized predictive results regarding the efficacy of potential treatments. This technique can be used to develop targeted therapies that minimize off target effects for diseases that are characterized by r...