Name: fabrication and characterization of a conformal skin-like electronic system for quantitative, cutaneous wound management
Uploaded: 2015-09-02T14:00:00.000+00:00
Duration: 8 min 50 s
Description: Watch this Scientific Journal Video about Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management at JoVE.com

وأيد هذا العمل من قبل التمويل بدء التشغيل من كلية الهندسة، جامعة فرجينيا كومنولث وبعض الأجهزة الإلكترونية أعدت في مرافق التصنيع الدقيق في مركز رايت فرجينيا الدقيقة. ونحن نعترف الباحثين الذين قدموا مساهمات للجهاز والبيانات السريرية (أرقام 3 و 5 في هذه الورقة)، تم الحصول عليها من مقالة نشرت 10. W.-HY بفضل يوشياكي هاتوري لحسب الطلب، برنامج تسجيل البيانات.

<ol>
	<li>Dargaville, T. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sensors+and+imaging+for+wound+healing:+A+review.">Sensors and imaging for wound healing: A review.</a> Biosens Bioelectron. 41, 30-42 (2013).</li><li>Panuncialman, J., Hammerman, S., Carson, P., Falanga, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Wound+edge+biopsy+sites+in+chronic+wounds+heal+rapidly+and+do+not+result+in+delayed+wound+healing.">Wound edge biopsy sites in chronic wounds heal rapidly and do not result in delayed wound healing.</a> J Invest Dermatol. 129, S47-S47 (2009).</li><li>Hess, C. T., Kirsner, R. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Orchestrating Wound Healing: Assessing and Preparing the Wound Bed. Adv Skin Wound Care. 16 (5), 246-257 (2003).</li><li>Lange-Asschenfeldt, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Applicability+of+confocal+laser+scanning+microscopy+for+evaluation+and+monitoring+of+cutaneous+wound+healing.">Applicability of confocal laser scanning microscopy for evaluation and monitoring of cutaneous wound healing.</a> J Biomed Opt. 17 (7), (2012).</li><li>Crane, N. J., Elster, E. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vibrational+spectroscopy:+a+tool+being+developed+for+the+noninvasive+monitoring+of+wound+healing.">Vibrational spectroscopy: a tool being developed for the noninvasive monitoring of wound healing.</a> J Biomed Opt. 17 (7), (2012).</li><li>Jeong, J. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Materials+and+Optimized+Designs+for+Human-Machine+Interfaces+Via+Epidermal+Electronics.">Materials and Optimized Designs for Human-Machine Interfaces Via Epidermal Electronics.</a> Adv Mater. 25 (47), 6839-6846 (2013).</li><li>Kim, D. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Epidermal+Electronics.">Epidermal Electronics.</a> Science. 333 (6044), 838-843 (2011).</li><li>Webb, R. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultrathin+conformal+devices+for+precise+and+continuous+thermal+characterization+of+human+skin+(vol+12,+pg+938).">Ultrathin conformal devices for precise and continuous thermal characterization of human skin (vol 12, pg 938).</a> Nat Mater. 12, 1078-1078 (2013).</li><li>Yeo, W. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multifunctional+Epidermal+Electronics+Printed+Directly+Onto+the+Skin.">Multifunctional Epidermal Electronics Printed Directly Onto the Skin.</a> Adv Mater. 25 (20), 2773-2778 (2013).</li><li>Hattori, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multifunctional+skin-like+electronics+for+quantitative,+clinical+monitoring+of+cutaneous+wound+healing.">Multifunctional skin-like electronics for quantitative, clinical monitoring of cutaneous wound healing.</a> Adv Healthc Mater. 3 (10), 1597-1607 (2014).</li><li>Guo, S., DiPietro, L. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Factors+Affecting+Wound+Healing.">Factors Affecting Wound Healing.</a> J Dent Res. 89 (3), 219-229 (2010).</li><li>Matzeu, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Skin+temperature+monitoring+by+a+wireless+sensor.">Skin temperature monitoring by a wireless sensor.</a> Ieee Ind Elec. , 3533-3535 (2011).</li><li>Cahill, D. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermal-Conductivity+Measurement+from+30-K+to+750-K+-+the+3-Omega+Method.">Thermal-Conductivity Measurement from 30-K to 750-K - the 3-Omega Method.</a> Rev Sci Instrum. 61 (2), 802-808 (1990).</li><li>Fan, J. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fractal+Design+Concepts+for+Stretchable+Electronics.">Fractal Design Concepts for Stretchable Electronics.</a> Nature Commun. 5 (3266), (2013).</li><li>Song, Y. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Digital+cameras+with+designs+inspired+by+the+arthropod+eye.">Digital cameras with designs inspired by the arthropod eye.</a> Nature. 497 (7447), 95-99 (2013).</li><li>Jeong, J. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Capacitive+Epidermal+Electronics+for+Electrically+Safe,+Long-Term+Electrophysiological+Measurements.">Capacitive Epidermal Electronics for Electrically Safe, Long-Term Electrophysiological Measurements.</a> Adv Healthc Mater. 3 (5), 642-648 (2013).</li><li>Zhang, Y. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+and+Theoretical+Studies+of+Serpentine+Microstructures+Bonded+To+Prestrained+Elastomers+for+Stretchable+Electronics.">Experimental and Theoretical Studies of Serpentine Microstructures Bonded To Prestrained Elastomers for Stretchable Electronics.</a> Adv Funct Mater. 24 (14), 2028-2037 (2014).</li><li>Carlson, A., Bowen, A. M., Huang, Y. G., Nuzzo, R. G., Rogers, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transfer+Printing+Techniques+for+Materials+Assembly+and+Micro/Nanodevice+Fabrication.">Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication.</a> Adv Mater. 24 (39), 5284-5318 (2012).</li><li>Yeo, W. H., Webb, R. C., Lee, W., Jung, S., Rogers, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bio-integrated+electronics+and+sensor+systems.">Bio-integrated electronics and sensor systems.</a> Proc Spie. 8725, (2013).</li><li>Chung, H. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+of+Releasable+Single-Crystal+Silicon&#8211;Metal+Oxide+Field-Effect+Devices+and+Their+Deterministic+Assembly+on+Foreign+Substrates.">Fabrication of Releasable Single-Crystal Silicon&#8211;Metal Oxide Field-Effect Devices and Their Deterministic Assembly on Foreign Substrates.</a> Adv Funct Mater. 21 (16), 3029-3036 (2011).</li><li>Kim, H. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Unusual+strategies+for+using+indium+gallium+nitride+grown+on+silicon+(111)+for+solid-state+lighting.">Unusual strategies for using indium gallium nitride grown on silicon (111) for solid-state lighting.</a> Proc Natl Acad Sci U.S.A. 108 (25), 10072-10077 (2011).</li><li>Padilla-Medina, J. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessment+technique+for+acne+treatments+based+on+statistical+parameters+of+skin+thermal+images.">Assessment technique for acne treatments based on statistical parameters of skin thermal images.</a> J Biomed Opt. 19 (4), 046019-046019 (2014).</li></ol>

The authors declare that they have no competing financial interests.

This article highlights the methods and protocols to fabricate a conformal, skin-like electronics system that enables conformal lamination near the wound tissues, which offers quantitative measurement of skin temperature and thermal conductivity mapping on the skin. 
The key features include the utilization of novel techniques of materials transfer printing and hard-soft materials integration to design and develop the flexible/stretchable, soft electronic device. The use of biocompatible, elec...

في دراسة سريرية والبحوث الطبية الحيوية، ركزت رصد التئام الجروح على طريقة الغازية التي تقوم على التقييم النسيجي للنسيج التغيير المورفولوجي في الجروح 1،2. في الآونة الأخيرة، والتقدم السريع في التقنيات الإلكترونية تتيح تطوير التصوير والتحليل أدوات عالية الدقة التي يمكن أن تفقد البصر الجرح عملية الشفاء عن طريق التصوير الرقمي 3،4 أو متحد البؤر المجهر والتحليل الطيفي 4،5. ومع ذلك، هذه النهج التصوير تتطلب تكلفة عالية، والأدوات والعمليات البصرية المعقدة، والأهم من ذلك، يحتاج المرضى إلى أن يجمد أثناء الاختبار. لذلك، هناك حاجة للأجهزة والأنظمة الجديدة التي الكمية، غير الغازية، وسهلة الاستخدام، وغير مكلفة، ومتعددة الوظائف لتقديم إدارة الجرح أكثر دقة. هنا، ونحن نقدم نظاما إلكترونيا مثل الجلد التي توفر الدقيق، ورسم الخرائط في الوقت الحقيقي من درجة الحرارة والحرارية conductivity وتقدم مستوى دقيق للتدفئة في مواقع الجرح عن طريق امتثالي التصفيح الجهاز غير جراحية. ويعرض هذا الجهاز فئة التكنولوجيا، محمولة على الجلد البشرة الأنظمة الإلكترونية التي تم تصميمها لتتناسب إلى الخواص الميكانيكية والمواد (مجموع سمك، والانحناء صلابة، الرجوعية فعالة، والكثافة الجماهيرية) من البشرة 6-9. تم تصميم الجهاز في حيويا، والجلد ودية، واقية من الماء، وشكل قابلة لإعادة الاستخدام التي يمكن غسلها وتطهيرها عن التطبيقات السريرية على المرضى 10. جهاز الكتروني امتثالي شنت بالقرب من أنسجة الجرح يجسد مرحلة الالتهاب (واحد من عملية التئام الجروح)، والناجمة عن زيادة تدفق الدم والتفاعلات الإنزيمية على الجرح 11،12، من خلال تسجيل الكمي لدرجة الحرارة 8 والتوصيل الحراري 13، المترابطة لترطيب . الدراسات التجريبية والحسابية التي تحدد تصميم الميكانيكا الأمثل لaccommodأكل الاقتراحات الطبيعية وسلالات تطبيقها دون كسر الميكانيكية والتقاط الفيزياء الكامنة وراء تمتد ميكانيكا والالكترونيات مثل الجلد الذي شرائح conformally على سطح الجلد، والتي تقدم اقتناء إشارات الدقة العالية. البروتوكولات وصفها في هذه المادة وأساليب التصنيع الدقيق لأنظمة مثل الجلد الإلكترونية، واختبار إعداد بما في ذلك تنظيف الجهاز، إعداد المعدات في عملية إعداد سريرية، والتطبيقات السريرية لرصد الكمي لدرجة الحرارة والموصلية الحرارية على الجروح الجلدية.

<table><tbody><tr><td>3&quot; Silicon wafer</td><td>University Wafer, USA</td><td></td><td>Use as carrier to fabricate the device</td></tr><tr><td>Acetone</td><td>Fisher Scientific, USA</td><td>A18-1</td><td>Use to clean a wafer and to remove photoresist</td></tr><tr><td>Isopropanol (IPA)</td><td>Fisher Scientific, USA</td><td>A459-1</td><td>Use to clean a wafer</td></tr><tr><td>AZ4620 photoresist</td><td>AZ Electrionic Materials, USA</td><td></td><td>Use to make patterns on metals and polymers</td></tr><tr><td>AZ400K developer</td><td>AZ Electrionic Materials, USA</td><td></td><td>Use to develop AZ4620 photoresist</td></tr><tr><td>Chromium etchant</td><td>Transene, USA</td><td>1020AC</td><td>Use to etch Cr layer of device</td></tr><tr><td>Copper etchant</td><td>Transene, USA</td><td>ASP-100</td><td>Use to etch Cu layer of device</td></tr><tr><td>Sylgard 184 Silicone Elastomer Kit (PDMS)</td><td>Dow Corning, USA</td><td>39100000</td><td>Use as a substrate for &#039;dry&#039; retrieval</td></tr><tr><td>PI2545 polyimide</td><td>HD MicroSystem, USA</td><td></td><td>Use to encapsulate metal layer</td></tr><tr><td>Solaris</td><td>Smooth-On, USA</td><td></td><td>Use as substrate and to encapsulate device</td></tr><tr><td>Petridish</td><td>Carolina, USA</td><td>741255</td><td>Use as mold to make substrate</td></tr><tr><td>Water-Soluble Wave Solder Tape 5414</td><td>3M, USA</td><td>AM000000217</td><td>Use to retrive device from PDMS layer</td></tr><tr><td>High Activity Liquid Stainless Steel Flux</td><td>Worthington, USA</td><td>331929</td><td>Use to remove oxidation layer on Cu</td></tr><tr><td>Flexible, micro-film cable</td><td>Elform, USA</td><td></td><td>Use to make the electrical connection between the electronic device and the data acquisition system</td></tr><tr><td>pH Neutral Cleaner</td><td>Australian Gold, USA</td><td></td><td>Use as disinfectant solution to clean device in clinical testing</td></tr><tr><td>Solder</td><td>Kester, USA</td><td>24-6337-9703</td><td>Use as material to solder hard wires</td></tr><tr><td>Ultraviolet lamp</td><td>Cole-Parmer, USA</td><td>97600-00</td><td>Use to activate PDMS layer as hydrophilic surface</td></tr><tr><td>Multiplexer</td><td>FixYourBoard, USA</td><td>U802</td><td>Use to acquire measurements from six sensing components&amp;nbsp;</td></tr><tr><td>DC/AC current source</td><td>Keithley, USA</td><td>6221</td><td>Use to supply current</td></tr><tr><td>SMD Digital Hot Air Rework Station</td><td>Aoyue, China</td><td>968A+</td><td>Use to solder hard wires, to electrically connect between the device and external instruments</td></tr><tr><td>Infrared camera</td><td>FLIR, USA</td><td>435-0001-01-00</td><td>Use to take infrared images in experiment</td></tr><tr><td>Digital multimeter</td><td>Fluke, USA</td><td>117</td><td>Use to check electrical connection</td></tr><tr><td>Lock-in amplifier</td><td>Stanford Research System, USA</td><td>SR830</td><td>Use to perform four-point-probe-measurement</td></tr><tr><td>Electron beam evaporator</td><td>9 scale Vacuum Products, USA</td><td></td><td>Use to deposit thin films (Cu and SiO&lt;sub&gt;2&lt;/sub&gt;)</td></tr></tbody></table>

fabrication and characterization of a conformal skin-like electronic system for quantitative, cutaneous wound management

Recent advances in the development of electronic technologies and biomedical devices offer opportunities for non-invasive, quantitative assessment of cutaneous wound healing on the skin. Existing methods, however, still rely on visual inspections through various microscopic tools and devices that normally include high-cost, sophisticated systems and require well trained personnel for operation and data analysis. Here, we describe methods and protocols to fabricate a conformal, skin-like electronics system that enables conformal lamination to the skin surface near the wound tissues, which provides recording of high fidelity electrical signals such as skin temperature and thermal conductivity. The methods of device fabrication provide details of step-by-step preparation of the microelectronic system that is completely enclosed with elastomeric silicone materials to offer electrical isolation. The experimental study presents multifunctional, biocompatible, waterproof, reusable, and flexible/stretchable characteristics of the device for clinical applications. Protocols of clinical testing provide an overview and sequential process of cleaning, testing setup, system operation, and data acquisition with the skin-like electronics, gently mounted on hypersensitive, cutaneous wound and contralateral tissues on patients.

ويبين الشكل 1 لمحة عامة عن خصائص امتثالي، نظام يشبه الجلد الإلكترونية، والمصممة لكمية، إدارة الجرح الجلدية على المرضى. يتكون جهاز الكتروني متعدد الوظائف للهياكل كسورية الميكروسكيل 3،14 واعوج الخيطي يتتبع 9،17 على غشاء رقيق من اللدائن الم...

Watch this Scientific Journal Video about Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management at JoVE.com

Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management

This article presents methods to fabricate and characterize a conformal, skin-like electronic system and protocols for the use in clinical applications, particularly on cutaneous wound management.

تصنيع وتوصيف نظام الكتروني مثل الجلد امتثالي لإدارة الكمي، الجلدي الجرح

Recent advances in the development of electronic technologies and biomedical devices offer opportunities for non-invasive, quantitative assessment of ...

fabrication-characterization-conformal-skin-like-electronic-system

Research

JoVE Journal

Bioengineering

8.8K Views.  Virginia Commonwealth University. This article presents methods to fabricate and characterize a conformal, skin-like electronic system and protocols for the use in clinical applications, particularly on cutaneous wound management. 

Video: Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management

Hollow Microneedle-based Sensor for Multiplexed Transdermal Electrochemical Sensing

The development of a minimally invasive multiplexed monitoring system for rapid analysis of biologically-relevant molecules could offer individuals suffering from chronic medical conditions facile assessment of their immediate physiological state. Furthermore, it could serve as a research tool for analysis of complex, multifactorial medical conditions. In order for such a multianalyte sensor to be realized, it must be minimally invasive, sampling of interstitial fluid must occur without pain or harm to the user, and analysis must be rapid as well as selective.
Initially developed for pain-free drug delivery, microneedles have been used to deliver vaccines and pharmacologic agents (e.g., insulin) through the skin.1-2 Since these devices access the interstitial space, microneedles that are integrated with microelectrodes can be used as transdermal electrochemical sensors. Selective detection of glucose, glutamate, lactate, hydrogen peroxide, and ascorbic acid has been demonstrated using integrated microneedle-electrode devices with carbon fibers, modified carbon pastes, and platinum-coated polymer microneedles serving as transducing elements.3-7,8
This microneedle sensor technology has enabled a novel and sophisticated analytical approach for in situ and simultaneous detection of multiple analytes. Multiplexing offers the possibility of monitoring complex microenvironments, which are otherwise difficult to characterize in a rapid and minimally invasive manner. For example, this technology could be utilized for simultaneous monitoring of extracellular levels of, glucose, lactate and pH,9 which are important metabolic indicators of disease states7,10-14 (e.g., cancer proliferation) and exercise-induced acidosis.15

This article details the construction of a multiplexed microneedle-based sensor. The device is being developed for in situ sampling and electrochemical analysis of multiple analytes in a rapid and selective manner. We envision clinical medicine and biomedical research uses for these microneedle-based sensors.

أجوف Microneedle المستندة إلى الاستشعار عن تعدد في الإرسال الاستشعار الكهروكيميائية عبر الجلد

The development of a minimally invasive multiplexed monitoring system for rapid analysis of biologically-relevant molecules could offer individuals ...

Bridging the Bio-Electronic Interface with Biofabrication

Advancements in lab-on-a-chip technology promise to revolutionize both research and medicine through lower costs, better sensitivity, portability, and higher throughput. The incorporation of biological components onto biological microelectromechanical systems (bioMEMS) has shown great potential for achieving these goals. Microfabricated electronic chips allow for micrometer-scale features as well as an electrical connection for sensing and actuation. Functional biological components give the system the capacity for specific detection of analytes, enzymatic functions, and whole-cell capabilities. Standard microfabrication processes and bio-analytical techniques have been successfully utilized for decades in the computer and biological industries, respectively. Their combination and interfacing in a lab-on-a-chip environment, however, brings forth new challenges. There is a call for techniques that can build an interface between the electrode and biological component that is mild and is easy to fabricate and pattern.
Biofabrication, described here, is one such approach that has shown great promise for its easy-to-assemble incorporation of biological components with versatility in the on-chip functions that are enabled. Biofabrication uses biological materials and biological mechanisms (self-assembly, enzymatic assembly) for bottom-up hierarchical assembly. While our labs have demonstrated these concepts in many formats 1,2,3, here we demonstrate the assembly process based on electrodeposition followed by multiple applications of signal-based interactions. The assembly process consists of the electrodeposition of biocompatible stimuli-responsive polymer films on electrodes and their subsequent functionalization with biological components such as DNA, enzymes, or live cells 4,5. Electrodeposition takes advantage of the pH gradient created at the surface of a biased electrode from the electrolysis of water 6,7,. Chitosan and alginate are stimuli-responsive biological polymers that can be triggered to self-assemble into hydrogel films in response to imposed electrical signals 8. The thickness of these hydrogels is determined by the extent to which the pH gradient extends from the electrode. This can be modified using varying current densities and deposition times 6,7. This protocol will describe how chitosan films are deposited and functionalized by covalently attaching biological components to the abundant primary amine groups present on the film through either enzymatic or electrochemical methods 9,10. Alginate films and their entrapment of live cells will also be addressed 11. Finally, the utility of biofabrication is demonstrated through examples of signal-based interaction, including chemical-to-electrical, cell-to-cell, and also enzyme-to-cell signal transmission. 
Both the electrodeposition and functionalization can be performed under near-physiological conditions without the need for reagents and thus spare labile biological components from harsh conditions. Additionally, both chitosan and alginate have long been used for biologically-relevant purposes 12,13. Overall, biofabrication, a rapid technique that can be simply performed on a benchtop, can be used for creating micron scale patterns of functional biological components on electrodes and can be used for a variety of lab-on-a-chip applications.

This article describes a biofabrication approach: deposition of stimuli-responsive polysaccharides in the presence of biased electrodes to create biocompatible films which can be functionalized with cells or proteins. We demonstrate a bench-top strategy for the generation of the films as well as their basic uses for creating interactive biofunctionalized surfaces for lab-on-a-chip applications.

سد واجهة الحيوية الالكترونية مع Biofabrication

Advancements in lab-on-a-chip technology promise to revolutionize both research and medicine through lower costs, better sensitivity, portability, and ...

A Full Skin Defect Model to Evaluate Vascularization of Biomaterials In Vivo

Insufficient vascularization is considered to be one of the main factors limiting the clinical success of tissue-engineered constructs. In order to evaluate new strategies that aim at improving vascularization, reliable methods are required to make the in-growth of new blood vessels into bio-artificial scaffolds visible and quantify the results. Over the past couple of years, our group has introduced a full skin defect model that enables the direct visualization of blood vessels by transillumination and provides the possibility of quantification through digital segmentation. In this model, one surgically creates full skin defects in the back of mice and replaces them with the material tested. Molecules or cells of interest can also be incorporated in such materials to study their potential effect. After an observation time of one&#8217;s own choice, materials are explanted for evaluation. Bilateral wounds provide the possibility of making internal comparisons that minimize artifacts among individuals as well as of decreasing the number of animals needed for the study. In comparison to other approaches, our method offers a simple, reliable and cost effective analysis. We have implemented this model as a routine tool to perform high-resolution screening when testing vascularization of different biomaterials and bio-activation approaches.

A Full Skin Defect Model to Evaluate Vascularization of Biomaterials In Vivo

Vascularization is key to approaches in successful tissue engineering. Therefore, reliable technologies are required to evaluate the development of vascular networks in tissue-constructs. Here we present a simple and cost-effective method to visualize and quantify vascularization in vivo.

جلد كامل عيب نموذج في تقييم الأوعية الدموية من الحيوية<em&gt; في فيفو</em

Insufficient vascularization is considered to be one of the main factors limiting the clinical success of tissue-engineered constructs. In order to ...

Generation of a Three-dimensional Full Thickness Skin Equivalent and Automated Wounding

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models reflect the human wound situation better than animal models. Although two-dimensional models are widely used to investigate processes such as cellular migration and proliferation, models that are more complex are required to gain a deeper knowledge about wound healing. Besides a suitable model system, the generation of precise and reproducible wounds is crucial to ensure comparable results between different test runs. In this study, the generation of a three-dimensional full thickness skin equivalent to study wound healing is shown. The dermal part of the models is comprised of human dermal fibroblast embedded in a rat-tail collagen type I hydrogel. Following the inoculation with human epidermal keratinocytes and consequent culture at the air-liquid interface, a multilayered epidermis is formed on top of the models. To study the wound healing process, we additionally developed an automated wounding device, which generates standardized wounds in a sterile atmosphere.

The goal of this protocol is to build up a three-dimensional full thickness skin equivalent, which resembles natural skin. With a specifically constructed automated wounding device, precise and reproducible wounds can be generated under maintenance of sterility.

جيل من سمك ثلاثي الأبعاد الجلد كامل أي ما يعادل واصابة الآلي

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models ...

A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles

Today, wearable electronics devices combine a large variety of functional, stretchable, and flexible technologies. However, in many cases, these devices cannot be worn under everyday conditions. Therefore, textiles are commonly considered the best substrate to accommodate electronic devices in wearable use. In this paper, we describe how to selectively pattern organic electroactive materials on textiles from a solution in an easy and scalable manner. This versatile deposition technique enables the fabrication of wearable organic electronic devices on clothes.

In this paper, we present a protocol to selectively deposit organic materials on textiles, which allows for the direct integration of organic electronic devices with wearables. The fabricated devices can be fully integrated in textiles, respecting their mechanical appearance and enabling sensing capabilities.

وبسيطة وقابلة للتطوير أسلوب تلفيق لعضوي الأجهزة الإلكترونية بشأن المنسوجات

Today, wearable electronics devices combine a large variety of functional, stretchable, and flexible technologies. However, in many cases, these devices ...

Human Ex vivo Wound Model and Whole-Mount Staining Approach to Accurately Evaluate Skin Repair

Chronic non-healing wounds, which primarily affect the elderly and diabetic, are a significant area of clinical unmet need. Unfortunately, current chronic wound treatments are inadequate, while available pre-clinical models poorly predict the clinical efficacy of new therapies. Here we describe a high throughput, pre-clinical model to assess multiple aspects of the human skin repair response. Partial thickness wounds were created in human ex vivo skin and cultured across a healing time course. Skin wound biopsies were collected in fixative for the whole-mount staining procedure. Fixed samples were blocked and incubated in primary antibody, with detection achieved via fluorescently conjugated secondary antibody. Wounds were counterstained and imaged via confocal microscopy before calculating percentage wound closure (re-epithelialization) in each biopsy. Applying this protocol, we reveal that 2 mm excisional wounds created in healthy donor skin are fully re-epithelialized by day 4-5 post-wounding. On the contrary, closure rates of diabetic skin wounds are significantly reduced, accompanied by perturbed barrier reformation. Combining human skin wounding with a novel whole-mount staining approach allows a rapid and reproducible method to quantify ex vivo wound repair. Collectively, this protocol provides a valuable human platform to evaluate the effectiveness of potential wound therapies, transforming pre-clinical testing and validation.

Here we demonstrate an optimized technique for assessing wound repair using ex vivo human skin combined with a whole-mount staining approach. This methodology provides a pre-clinical platform for the evaluation of potential wound therapies.

الإنسان السابق الجسم الحي الجرح نموذج ونهج تلطيخ جبل كامل لتقييم بدقة إصلاح الجلد

Chronic non-healing wounds, which primarily affect the elderly and diabetic, are a significant area of clinical unmet need. Unfortunately, current chronic ...

Developmental Biology

Generation of Self-assembled Vascularized Human Skin Equivalents

Human skin equivalents (HSEs) are tissue engineered constructs that model epidermal and dermal components of human skin. These models have been used to study skin development, wound healing, and grafting techniques. Many HSEs continue to lack vasculature and are additionally analyzed through post-culture histological sectioning which limits volumetric assessment of the structure. Presented here is a straightforward protocol utilizing accessible materials to generate vascularized human skin equivalents (VHSE); further described are volumetric imaging and quantification techniques of these constructs. Briefly, VHSEs are constructed in 12 well culture inserts in which dermal and epidermal cells are seeded into rat tail collagen type I gel. The dermal compartment is made up of fibroblast and endothelial cells dispersed throughout collagen gel. The epidermal compartment is made up of keratinocytes (skin epithelial cells) that differentiate at the air-liquid interface. Importantly, these methods are customizable based on needs of the researcher, with results demonstrating VHSE generation with two different fibroblast cell types: human dermal fibroblasts (hDF) and human lung fibroblasts (IMR90s). VHSEs were developed, imaged through confocal microscopy, and volumetrically analyzed using computational software at 4- and 8-week timepoints. An optimized process to fix, stain, image, and clear VHSEs for volumetric examination is described. This comprehensive model, imaging, and analysis techniques are readily customizable to the specific research needs of individual labs with or without prior HSE experience.

The goal of this protocol is to describe the generation and volumetric analysis of vascularized human skin equivalents using accessible and simple techniques for long term culture. To the extent possible, the rationale for steps is described to allow researchers the ability to customize based on their research needs.

جيل من مكافئات الجلد البشري الوعائية ذاتية التجميع

Human skin equivalents (HSEs) are tissue engineered constructs that model epidermal and dermal components of human skin. These models have been used to ...

Generation of a Simplified Three-Dimensional Skin-on-a-chip Model in a Micromachined Microfluidic Platform

This work presents a new, cost-effective, and reliable microfluidic platform with the potential to generate complex multilayered tissues. As a proof of concept, a simplified and undifferentiated human skin containing a dermal (stromal) and an epidermal (epithelial) compartment has been modelled. To accomplish this, a versatile and robust, vinyl-based device divided into two chambers has been developed, overcoming some of the drawbacks present in microfluidic devices based on polydimethylsiloxane (PDMS) for biomedical applications, such as the use of expensive and specialized equipment or the absorption of small, hydrophobic molecules and proteins. Moreover, a new method based on parallel flow was developed, enabling the in situ deposition of both the dermal and epidermal compartments. The skin construct consists of a fibrin matrix containing human primary fibroblasts and a monolayer of immortalized keratinocytes seeded on top, which is subsequently maintained under dynamic culture conditions. This new microfluidic platform opens the possibility to model human skin diseases and extrapolate the method to generate other complex tissues.

Here, we present a protocol to generate a three-dimensional simplified and undifferentiated skin model using a micromachined microfluidic platform. A parallel flow approach allows the in situ deposition of a dermal compartment for the seeding of epithelial cells on top, all controlled by syringe pumps.

جيل من نموذج مبسط ثلاثي الأبعاد للبشرة على رقاقة في منصة Micromachined Microfluidic

This work presents a new, cost-effective, and reliable microfluidic platform with the potential to generate complex multilayered tissues. As a proof of ...

Conformable Wearable Electrodes: From Fabrication to Electrophysiological Assessment

Wearable electronic devices are becoming key players in monitoring the body signals predominantly altered during physical activity tracking. Considering the growing interest in telemedicine and personalized care driven by the rise of the Internet of Things era, wearable sensors have expanded their field of application into healthcare. To ensure the collection of clinically relevant data, these devices need to establish conformable interfaces with the human body to provide high-signal-quality recordings and long-term operation. To this end, this paper presents a method to easily fabricate conformable thin tattoo- and soft textile-based sensors for their application as wearable organic electronic devices in a broad spectrum of surface electrophysiological recordings. 
The sensors are developed through a cost-effective and scalable process of cutaneous electrode patterning using poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), the most popular conductive polymer in bioelectronics, on off-the-shelf, wearable substrates. This paper presents key steps in electrode characterization through impedance spectroscopy to investigate their performance in signal transduction when coupled with the skin. Comparative studies are required to position the performance of novel sensors with respect to the clinical gold standard. To validate the fabricated sensors' performance, this protocol shows how to perform various biosignal recordings from different configurations through a user-friendly and portable electronic setup in a laboratory environment. This methods paper will allow multiple experimental initiatives to advance the current state of the art in wearable sensors for human body health monitoring.

Two recent technologies-tattoo and textiles-have demonstrated promising results in cutaneous sensing. Here, we present the fabrication and evaluation methods of tattoo and textile electrodes for cutaneous electrophysiological sensing. These electronic interfaces made of conductive polymers outperform the existing standards in terms of comfort and sensitivity.

أقطاب كهربائية قابلة للارتداء متوافقة: من التصنيع إلى التقييم الكهروفسيولوجي

Wearable electronic devices are becoming key players in monitoring the body signals predominantly altered during physical activity tracking. Considering ...

Development of a Benchtop Model for Evaluating the Compatibility of Wound Dressing Materials with Negative Pressure Wound Therapy Systems

Negative pressure wound therapy (NPWT) systems facilitate wound healing by applying sub-atmospheric pressure to the wound bed, which promotes granulation tissue formation and reduces inflammation. Wound dressings can be used with these systems to enhance healing; however, the effects of dressings on NPWT device performance are challenging to assess. The purpose of this study was to develop a benchtop flesh analog model for testing the compatibility of wound dressing materials with NPWT devices. In this study, a chitosan-based advanced wound care device was evaluated for its effects on NPWT performance under maximum and minimum therapy pressures. The goal was to use the model to compare pressure readings and fluid collection for samples with and without the chitosan wound care device. The benchtop model was constructed using a plastic box connected to multiple pressure gauges. A circular defect was created on a piece of pork belly, used as the flesh analog, and inserted into the box. The defect was filled with standard NPWT foam or foam combined with the wound dressing. Simulated body fluid containing bovine serum was added to the box, which was then tested at either maximum (-200 mmHg) or minimum (-25 mmHg) pressures for 72 h. Pressure and fluid collection were recorded every 12 h. The NPWT system successfully maintained pressure over the 72 h test period, both with and without the test dressings. The addition of the wound dressings did not impact fluid collection. The test box proved effective as a benchtop model, as it could be sealed and maintained vacuum conditions over the 72 h testing period. This model successfully demonstrated its utility in evaluating the compatibility of wound dressing materials with NPWT systems.

This study presents a benchtop model designed to evaluate the compatibility of wound dressing materials with negative pressure wound therapy systems by assessing pressure and fluid collection over 72 h under continuous and intermittent pressure settings.

تطوير نموذج منضدة لتقييم توافق مواد تضميد الجروح مع أنظمة علاج الجروح ذات الضغط السلبي

Negative pressure wound therapy (NPWT) systems facilitate wound healing by applying sub-atmospheric pressure to the wound bed, which promotes granulation ...