Funding was provided in part by BU and the NIH R01CA149561. The authors wish to thank the electrospinning/electrospraying team including Stefan Yohe, Eric Falde, Joseph Hersey, and Julia Wang for their helpful discussions and contributions to the preparation and characterization of superhydrophobic biomaterials.

The authors declare that they have no competing financial interests.

نهجنا في بناء المواد فائقة الكره من البوليمرات الطبية الحيوية يجمع بين كيمياء البوليمرات الاصطناعية مع تقنيات معالجة البوليمر من electrospinning وelectrospraying. توفر هذه التقنيات إما الألياف أو جزيئات، على التوالي. على وجه التحديد، يتم إعداد polycaprolactone وبولي (lactide- شارك -glycolid...

يتم تصنيف السطوح فائقة الكره عموما إلى إظهار ملامسة الماء واضح زوايا أكبر من 150 درجة مع انخفاض زاوية الاتصال التباطؤ. هي ملفقة هذه السطوح عن طريق إدخال عالية خشونة السطح على مواد الطاقة السطحية منخفضة لإقامة الناتجة واجهة الهواء السائل الصلبة التي تقاوم ترطيب 1-6. اعتمادا على طريقة التصنيع والأسطح الرقيقة أو متعددة الطبقات فائقة الكره، متعدد الطبقات الطلاء الركيزة فائقة الكره، أو هياكل فائقة الكره حتى بكميات كبيرة يمكن أن تكون مستعدة. هذا صد المياه دائمة أو شبه دائمة هو خاصية مفيدة أن يعمل على إعداد الأسطح التنظيف الذاتي 7، 8 أجهزة ميكروفلويديك، المضادة للحشف سطوح الخلايا / بروتين 9،10، الحد من السحب أسطح 11، وأجهزة تسليم المخدرات 12- 15. في الآونة الأخيرة، ووصف المحفزات متجاوبة المواد فائقة الكره حيث غير مبلل لدولة المبللة يتم تشغيلها بواسطة الكيميائية والفيزيائيةأو منبهات البيئية (على سبيل المثال، الضوء، ودرجة الحموضة، ودرجة الحرارة والموجات فوق الصوتية، وتطبيق الجهد الكهربائي / الحالية) 14،16-20، وهذه المواد يجدون استخدام لتطبيقات إضافية 21-25. تم إعداد أول السطوح فائقة الكره الاصطناعية من خلال معالجة أسطح المواد مع methyldihalogenosilanes 26، وكانت ذات قيمة محدودة للتطبيقات الطبية، حيث كانت المواد المستخدمة ليست مناسبة للاستخدام في الجسم الحي. هنا نحن تصف إعداد السطحية والمواد فائقة الكره السائبة من البوليمرات حيويا. نهجنا ينطوي electrospinning أو electrospraying خليط البوليمر تحتوي على القابلة للتحلل، والبوليستر الأليفاتية حيويا كعنصر رئيسي، مخدر مع البوليمرات مسعور تتألف من البوليستر والمعدلة ستيرات بولي (الجلسرين كربونات) 27-30. توفر تقنيات تصنيع خشونة السطح تعزيز والمسامية وداخل عالم حواءروبية أو الجسيمات، على التوالي، في حين أن استخدام إشابة البوليمرات يوفر انخفاض سطح البوليمر الطاقة التي تمزج مع البوليستر ويمكن electrospun ثابت أو electrosprayed 27،31،32. البوليستر دهنية قابلة للتحلل مثل بولي (حمض اللبن) (PLA)، وبولي (حمض الجليكوليك) (PGA)، وبولي (شارك عازلة الأحماض حمض اللبنيك -glycolic) (PLGA)، وpolycaprolactone (PCL) هي البوليمرات المستخدمة في أجهزة افق سريريا وبارزة في بحوث المواد الطبية الحيوية لما لها من غير سمية، التحلل البيولوجي، وسهولة تركيب 33. PGA وPLGA لاول مرة في العيادة كما الغرز bioresorbable في عام 1960 وأوائل عام 1970، على التوالي 34-37. منذ ذلك الحين، تم معالجة هذه بولي (الأحماض هيدروكسي) في مجموعة متنوعة من العوامل شكل الأخرى الخاصة بالتطبيق، مثل الصغرى 38،39 و 40،41 النانوية، والرقائق / أقراص 42، تنسجم 27،43، 44 الرغاوي، و أفلام 45 </sup&gt;. البوليستر الأليفاتية، فضلا عن البوليمرات الأخرى ذات الاهتمام الطبية الحيوية، يمكن electrospun لإنتاج نانو أو شبكة ستوكات الهياكل التي تمتلك مساحة عالية والمسامية وكذلك قوة الشد. الجدول 1 قائمة electrospun البوليمرات الاصطناعية لمختلف التطبيقات الطبية الحيوية وعلى المقابلة المراجع. Electrospinning وelectrospraying تقنيات سريعة وتجاريا قابلة لل. هذان تقنيات مماثلة تعتمد على تطبيق الجهد العالي (التنافر الكهربائي) للتغلب على التوتر السطحي للحل البوليمر / تذوب في إعداد ضخ حقنة كما أنها موجهة نحو الهدف على الارض 46،47. عند استخدام هذه التقنية بالتعاون مع البوليمرات طاقة السطح المنخفض (البوليمرات مسعور مثل بولي (شارك caprolactone- -glycerol أحادي ستيارات))، والناجمة المواد المعرض superhydrophobicity. لتوضيح هذا الاصطناعية والمواد نهج المعالجة العاملبناء المواد فائقة الكره من البوليمرات الحيوية الطبية، وصفنا توليف polycaprolactone- فائقة الكره وبولي (lactide- شارك -glycolide) مواد المستندة كأمثلة التمثيلية. وقد تم تجميع مواد إشابة البوليمرات منها بولي (شارك caprolactone- -glycerol أحادي ستيارات) وبولي (شارك lactide- -glycerol أحادي ستيارات) أولا، ثم يمزج مع polycaprolactone وبولي (lactide- شارك -glycolide)، electrospun على التوالي، وأخيرا أو electrosprayed. وتتميز المواد الناجم عن SEM التصوير وزاوية الاتصال قياس الزوايا، واختبار لفي التجارب المختبرية وتوافق مع الحياة فيفو. وأخيرا، يتم فحص التبول بكميات كبيرة من خلال شبكات فائقة الكره ثلاثية الأبعاد باستخدام محسنة النقيض الطبقي microcomputed.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>Silicone oil</td>
			<td>Sigma-Aldrich</td>
			<td>85409</td>
			<td></td>
		</tr>
		<tr>
			<td>Cis-2-Phenyl-1,3-dioxan-5-ol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">13468</td>
			<td></td>
		</tr>
		<tr>
			<td>Benzyl bromide</td>
			<td>Sigma-Aldrich</td>
			<td>B17905</td>
			<td>Toxic, lacrymator/eye irritant, use in chemical fume hood</td>
		</tr>
		<tr>
			<td>Potassium hydroxide</td>
			<td>Sigma-Aldrich</td>
			<td align="right">221473</td>
			<td>Corrosive</td>
		</tr>
		<tr>
			<td>Rotary evaporator</td>
			<td>Buchi</td>
			<td>R-124</td>
			<td></td>
		</tr>
		<tr>
			<td>High-vacuum pump</td>
			<td>Welch</td>
			<td align="right">8907</td>
			<td></td>
		</tr>
		<tr>
			<td>Nitrogen, ultra high purity</td>
			<td>Airgas</td>
			<td>NI UHP300</td>
			<td>Compressed gas</td>
		</tr>
		<tr>
			<td>Tetrahydrofuran, stabilized with BHT</td>
			<td>Pharmaco-Aaper</td>
			<td align="right">346000</td>
			<td>Flammable. Dried through column of XXX</td>
		</tr>
		<tr>
			<td>Dichloromethane</td>
			<td>Pharmaco-Aaper</td>
			<td align="right">313000</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Separatory funnel (1 L)</td>
			<td>Fisher Scientific</td>
			<td>13-678-606</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium sulfate</td>
			<td>Sigma-Aldrich</td>
			<td align="right">239313</td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol, absolute</td>
			<td>Pharmaco-Aaper</td>
			<td>111USP200</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Buchner funnel</td>
			<td>Fisher Scientific</td>
			<td>FB-966-F</td>
			<td></td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Pharmaco-Aaper</td>
			<td>339000ACS</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Sigma-Aldrich</td>
			<td align="right">320331</td>
			<td>Corrosive. Diluted to 2N in distilled water.</td>
		</tr>
		<tr>
			<td>Ethyl chloroformate, 97%</td>
			<td>Sigma-Aldrich</td>
			<td align="right">185892</td>
			<td>Toxic, flammable, harmful to environment</td>
		</tr>
		<tr>
			<td>Triethylamine (anhydrous)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">471283</td>
			<td>Toxic, flammable, harmful to environment</td>
		</tr>
		<tr>
			<td>Diethyl ether</td>
			<td>Pharmaco-Aaper</td>
			<td>373ANHACS</td>
			<td>Highly flammable. Purified through XXX column.</td>
		</tr>
		<tr>
			<td>3,6-Dimethyl-1,4-dioxane-2,5-dione (D,L-lactide)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">303143</td>
			<td></td>
		</tr>
		<tr>
			<td>Tin (II) ethylhexanoate</td>
			<td>Sigma-Aldrich</td>
			<td>S3252</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>&#949;-caprolactone (97%)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">704067</td>
			<td></td>
		</tr>
		<tr>
			<td>Toluene, anhydrous</td>
			<td>Sigma-Aldrich</td>
			<td align="right">244511</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Glass syringe</td>
			<td>Hamilton Company</td>
			<td>1700-series</td>
			<td></td>
		</tr>
		<tr>
			<td>Deuterated chloroform</td>
			<td>Cambridge Isotopes Laboratories, Inc.</td>
			<td>DLM-29-10</td>
			<td>Toxic</td>
		</tr>
		<tr>
			<td>Nuclear magnetic resonance instrument</td>
			<td>Varian</td>
			<td>V400</td>
			<td></td>
		</tr>
		<tr>
			<td>Palladium on carbon catalyst</td>
			<td>Strem Chemicals, Inc.</td>
			<td>46-1707</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogenator unit</td>
			<td>Parr</td>
			<td align="right">3911</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogenator shaker vessel</td>
			<td>Parr</td>
			<td>66CA</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogen</td>
			<td>Airgas</td>
			<td>HY HP300</td>
			<td>Highly flammable.</td>
		</tr>
		<tr>
			<td>Diatomaceous earth</td>
			<td>Sigma-Aldrich</td>
			<td align="right">22140</td>
			<td></td>
		</tr>
		<tr>
			<td>2H,2H,3H,3H-perflurononanoic acid</td>
			<td>Oakwood Products, Inc.</td>
			<td align="right">10519</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Stearic acid</td>
			<td>Sigma-Aldrich</td>
			<td>S4751</td>
			<td></td>
		</tr>
		<tr>
			<td>N,N&#8217;-dicyclohexylcarbodiimide</td>
			<td>Sigma-Aldrich</td>
			<td>D80002</td>
			<td>Toxic, irritant.</td>
		</tr>
		<tr>
			<td>4-(dimethylamino) pyridine</td>
			<td>Sigma-Aldrich</td>
			<td align="right">107700</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Hexanes</td>
			<td>Pharmaco-Aaper</td>
			<td>359000ACS</td>
			<td>Toxic, flammable.</td>
		</tr>
		<tr>
			<td>Gel permeation chromatography (GPC) system</td>
			<td>Rainin</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>GPC column</td>
			<td>Waters</td>
			<td>WAT044228</td>
			<td></td>
		</tr>
		<tr>
			<td>Differential scanning calorimeter</td>
			<td>TA Instruments</td>
			<td>Q100</td>
			<td></td>
		</tr>
		<tr>
			<td>Chloroform</td>
			<td>Pharmaco-Aaper</td>
			<td>309000ACS</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>N,N-dimethylformamide</td>
			<td>Sigma-Aldrich</td>
			<td align="right">227056</td>
			<td>Toxic, flammable.</td>
		</tr>
		<tr>
			<td>Polycaprolactone, MW 70-90 kg/mol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">440744</td>
			<td></td>
		</tr>
		<tr>
			<td>Poly(lactide-co-glycolide), MW 136 kg/mol</td>
			<td>Evonik Industries</td>
			<td>LP-712</td>
			<td></td>
		</tr>
		<tr>
			<td>10-mL glass syringe</td>
			<td>Hamilton Company</td>
			<td align="right">81620</td>
			<td></td>
		</tr>
		<tr>
			<td>18 AWG blunt needle</td>
			<td>BRICO Medical Supplies</td>
			<td>BN1815</td>
			<td></td>
		</tr>
		<tr>
			<td>Electrospinner enclosure box</td>
			<td>Custom-built</td>
			<td>N/A</td>
			<td>Made of acrylic panels</td>
		</tr>
		<tr>
			<td>High voltage DC supply</td>
			<td>Glassman High Voltage, Inc.</td>
			<td>PS/EL30R01.5</td>
			<td>High voltages, electrocution hazard</td>
		</tr>
		<tr>
			<td>Linear (translating) stage</td>
			<td>Servo Systems Co.</td>
			<td>LPS-12-20-0.2</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Programmable motor &#38; power supply</td>
			<td>Intelligent Motion Systems, Inc.</td>
			<td>MDrive23 Plus</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>24V DC motor &#38; power supply</td>
			<td>McMaster-Carr</td>
			<td>6331K32</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Aluminum collector drum</td>
			<td>Custom-built</td>
			<td></td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Syringe pump</td>
			<td>Fisher Scientific</td>
			<td>78-0100I</td>
			<td></td>
		</tr>
		<tr>
			<td>Inverted optical microscope</td>
			<td>Olympus</td>
			<td>IX70</td>
			<td></td>
		</tr>
		<tr>
			<td>Scanning electron microscope</td>
			<td>Carl Zeiss</td>
			<td>Supra V55</td>
			<td></td>
		</tr>
		<tr>
			<td>Conductive copper tape</td>
			<td>3M</td>
			<td align="right">16072</td>
			<td></td>
		</tr>
		<tr>
			<td>Aluminum SEM stubs</td>
			<td>Electron Microscopy Sciences</td>
			<td align="right">75200</td>
			<td></td>
		</tr>
		<tr>
			<td>Contact angle goniometer</td>
			<td>Kruss</td>
			<td>DSA100</td>
			<td></td>
		</tr>
		<tr>
			<td>Propylene glycol</td>
			<td>Sigma-Aldrich</td>
			<td>W294004</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Ethylene glycol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">324558</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Ioxaglate</td>
			<td>Guerbet</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Fetal bovine serum</td>
			<td>American Type Culture Collection</td>
			<td>30-2020</td>
			<td></td>
		</tr>
		<tr>
			<td>Micro-computed tomography instrument</td>
			<td>Scanco</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Image analysis software (Analyze)</td>
			<td>Mayo Clinic</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Tensile tester</td>
			<td>Instron</td>
			<td align="right">5848</td>
			<td></td>
		</tr>
		<tr>
			<td>Micrometer</td>
			<td>Multitoyo</td>
			<td>293-340</td>
			<td></td>
		</tr>
		<tr>
			<td>Calipers</td>
			<td>Fisher Scientific</td>
			<td>14-648-17</td>
			<td></td>
		</tr>
	</tbody>
</table>

fabricating superhydrophobic polymeric materials for biomedical applications

المواد فائقة الكره، مع الأسطح التي تمتلك الدول غير دائمة المبللة أو متبدل الاستقرار، هي من مصلحة لعدد من التطبيقات الطبية الحيوية والصناعية. نحن هنا تصف كيف electrospinning أو electrospraying خليط البوليمر تحتوي على القابلة للتحلل، حيويا البوليستر الأليفاتية (على سبيل المثال، polycaprolactone وبولي (lactide- شارك -glycolide))، كعنصر رئيسي، مخدر مع البوليمرات مسعور تتألف من البوليستر وstearate- بولي المعدلة (الجلسرين كربونات) يتيح مادة بيولوجية فائقة الكره. تقنيات تصنيع electrospinning أو electrospraying توفر خشونة السطح تعزيز والمسامية وداخل الألياف أو الجسيمات، على التوالي. استخدام الطاقة المنخفض سطح البوليمرات إشابة التي تمزج مع البوليستر ويمكن electrospun ثابت أو electrosprayed تتيح هذه المواد فائقة الكره. المعالم الهامة مثل حجم الألياف، وتكوين البوليمرات إشابة و / أو المشتركوتناقش ncentration، وآثارها على بلل. هذا المزيج من كيمياء البوليمرات وهندسة العمليات يتيح نهج متعدد الاستخدامات لتطوير المواد الخاصة بالتطبيق باستخدام تقنيات قابلة لل، التي يحتمل تعميم إلى فئة أوسع من البوليمرات لمجموعة متنوعة من التطبيقات.

من خلال سلسلة من التحولات الكيميائية، يتم تصنيعه وظيفية مونومر كربونات 5-benzyloxy-1،3-dioxan-2-واحد كما بيضاء صلبة بلورية (الشكل 1A). 1 H NMR يؤكد هيكل (الشكل 1B) ومطياف الكتلة و تحليل العناصر تأكيد التكوين. هذا الصلبة ثم يتم copolymerized إما D، L -lactide أو ε-caprolac...

Watch this Scientific Journal Video about Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications at JoVE.com

Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications

Two- and three-dimensional superhydrophobic polymeric materials are prepared by electrospinning or electrospraying biodegradable polymers blended with a lower surface energy polymer of similar composition.

افتعال فائقة الكره المواد البوليمرية للتطبيقات الطبية الحيوية

Superhydrophobic materials, with surfaces possessing permanent or metastable non-wetted states, are of interest for a number of biomedical and industrial ...

fabricating-superhydrophobic-polymeric-materials-for-biomedical

Research

Education

JoVE Core

JoVE Journal

Organic Chemistry

Bioengineering

Unit 1

Synthetic Polymers

SCIENTISTS IN ACTION

19.0K Views.  Boston University. Two- and three-dimensional superhydrophobic polymeric materials are prepared by electrospinning or electrospraying biodegradable polymers blended with a lower surface energy polymer of similar composition. 

Video: Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications

Evaluation of Polymeric Gene Delivery Nanoparticles by Nanoparticle Tracking Analysis and High-throughput Flow Cytometry

Non-viral gene delivery using polymeric nanoparticles has emerged as an attractive approach for gene therapy to treat genetic diseases1 and as a technology for regenerative medicine2. Unlike viruses, which have significant safety issues, polymeric nanoparticles can be designed to be non-toxic, non-immunogenic, non-mutagenic, easier to synthesize, chemically versatile, capable of carrying larger nucleic acid cargo and biodegradable and/or environmentally responsive. Cationic polymers self-assemble with negatively charged DNA via electrostatic interaction to form complexes on the order of 100 nm that are commonly termed polymeric nanoparticles. Examples of biomaterials used to form nanoscale polycationic gene delivery nanoparticles include polylysine, polyphosphoesters, poly(amidoamines)s and polyethylenimine (PEI), which is a non-degradable off-the-shelf cationic polymer commonly used for nucleic acid delivery1,3 . Poly(beta-amino ester)s (PBAEs) are a newer class of cationic polymers4 that are hydrolytically degradable5,6 and have been shown to be effective at gene delivery to hard-to-transfect cell types such as human retinal endothelial cells (HRECs)7, mouse mammary epithelial cells8, human brain cancer cells9 and macrovascular (human umbilical vein, HUVECs) endothelial cells10.
A new protocol to characterize polymeric nanoparticles utilizing nanoparticle tracking analysis (NTA) is described. In this approach, both the particle size distribution and the distribution of the number of plasmids per particle are obtained11. In addition, a high-throughput 96-well plate transfection assay for rapid screening of the transfection efficacy of polymeric nanoparticles is presented. In this protocol, poly(beta-amino ester)s (PBAEs) are used as model polymers and human retinal endothelial cells (HRECs) are used as model human cells. This protocol can be easily adapted to evaluate any polymeric nanoparticle and any cell type of interest in a multi-well plate format.

A protocol for nanoparticle tracking analysis (NTA) and high-throughput flow cytometry to evaluate polymeric gene delivery nanoparticles is described. NTA is utilized to characterize the nanoparticle particle size distribution and the plasmid per particle distribution. High-throughput flow cytometry enables quantitative transfection efficacy evaluation for a library of gene delivery biomaterials.

تقييم توصيل الجينات البوليمرية الجسيمات النانوية من تحليل تتبع جسيمات متناهية الصغر وعالية الإنتاجية قياس التدفق الخلوي

Non-viral gene delivery using polymeric nanoparticles has emerged as an attractive approach for gene therapy to treat genetic diseases1 and as a ...

Graphene Coatings for Biomedical Implants

Atomically smooth graphene as a surface coating has potential to improve implant properties. This demonstrates a method for coating nitinol alloys with nanometer thick layers of graphene for applications as a stent material. Graphene was grown on copper substrates via chemical vapor deposition and then transferred onto nitinol substrates. In order to understand how the graphene coating could change biological response, cell viability of rat aortic endothelial cells and rat aortic smooth muscle cells was investigated. Moreover, the effect of graphene-coatings on cell adhesion and morphology was examined with fluorescent confocal microscopy. Cells were stained for actin and nuclei, and there were noticeable differences between pristine nitinol samples compared to graphene-coated samples. Total actin expression from rat aortic smooth muscle cells was found using western blot. Protein adsorption characteristics, an indicator for potential thrombogenicity, were determined for serum albumin and fibrinogen with gel electrophoresis. Moreover, the transfer of charge from fibrinogen to substrate was deduced using Raman spectroscopy. It was found that graphene coating on nitinol substrates met the functional requirements for a stent material and improved the biological response compared to uncoated nitinol. Thus, graphene-coated nitinol is a viable candidate for a stent material.

Graphene offers potential as a coating material for biomedical implants. In this study we demonstrate a method for coating nitinol alloys with nanometer thick layers of graphene and determine how graphene may influence implant response.

الجرافين عوازل للزراعة الحيوية الطبية

Atomically smooth graphene as a surface coating has potential to improve implant properties. This demonstrates a method for coating nitinol alloys with ...

Designing Silk-silk Protein Alloy Materials for Biomedical Applications

Fibrous proteins display different sequences and structures that have been used for various applications in biomedical fields such as biosensors, nanomedicine, tissue regeneration, and drug delivery. Designing materials based on the molecular-scale interactions between these proteins will help generate new multifunctional protein alloy biomaterials with tunable properties. Such alloy material systems also provide advantages in comparison to traditional synthetic polymers due to the materials biodegradability, biocompatibility, and tenability in the body. This article used the protein blends of wild tussah silk (Antheraea pernyi) and domestic mulberry silk (Bombyx mori) as an example to provide useful protocols regarding these topics, including how to predict protein-protein interactions by computational methods, how to produce protein alloy solutions, how to verify alloy systems by thermal analysis, and how to fabricate variable alloy materials including optical materials with diffraction gratings, electric materials with circuits coatings, and pharmaceutical materials for drug release and delivery. These methods can provide important information for designing the next generation multifunctional biomaterials based on different protein alloys.

Blending is an efficient approach to generate biomaterials with a broad range of properties and combined features. By predicting the molecular interactions between different natural silk proteins, new silk-silk protein alloy platforms with tunable mechanical resiliency, electrical response, optical transparency, chemical processability, biodegradability, or thermal stability can be designed.

تصميم بروتين الحرير الحرير المواد سبيكة للتطبيقات الطبية الحيوية

Fibrous proteins display different sequences and structures that have been used for various applications in biomedical fields such as biosensors, ...

Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness and low bioactivity of metals. In this study, we have developed a new method towards fabricating a new type of bioactive and mechanically reliable porous metal scaffolds-densified porous Ti scaffolds. The method consists of two fabrication processes, 1) the fabrication of porous Ti scaffolds by dynamic freeze casting, and 2) coating and densification of the porous scaffolds. The dynamic freeze casting method to fabricate porous Ti scaffolds allowed the densification of porous scaffolds by minimizing the chemical contamination and structural defects. The densification process is distinctive for three reasons. First, the densification process is simple, because it requires a control of only one parameter (degree of densification). Second, it is effective, as it achieves mechanical enhancement and sustainable release of biomolecules from porous scaffolds. Third, it has broad applications, as it is also applicable to the fabrication of functionally graded porous scaffolds by spatially varied strain during densification.

Bioactive and mechanically reliable metal scaffolds have been fabricated through a method which consists of two processes, dynamic freeze casting for the fabrication of porous Ti, and coating and densification of the Ti scaffolds. The densification process is simple, effective and applicable to the fabrication of functionally graded scaffolds.

تصنيع ميكانيكيا الانضباطي والحيويه المعادن سقالات للتطبيقات الطبية الحيوية

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness ...

Fabricating Cotton Analytical Devices

A robust, low-cost analytical device should be user-friendly, rapid, and affordable. Such devices should also be able to operate with scarce samples and provide information for follow-up treatment. Here, we demonstrate the development of a cotton-based urinalysis (i.e., nitrite, total protein, and urobilinogen assays) analytical device that employs a lateral flow-based format, and is inexpensive, easily fabricated, rapid, and can be used to conduct multiple tests without cross-contamination worries. Cotton is composed of cellulose fibers with natural absorptive properties that can be leveraged for flow-based analysis. The simple but elegant fabrication process of our cotton-based analytical device is described in this study. The arrangement of the cotton structure and test pad takes advantage of the hydrophobicity and absorptive strength of each material. Because of these physical characteristics, colorimetric results can persistently adhere to the test pad. This device enables physicians to receive clinical information in a timely manner and shows great potential as a tool for early intervention.

To investigate simple fabrication approaches for multiple assay needs, we created a fluid-absorbing channel system made of cotton material. This device was used to establish a multiple detection platform, and solve contamination issues that commonly affect lateral flow-based biomedical devices, for clinical urinalysis of nitrite, total protein, and urobilinogen.

افتعال القطن الأجهزة التحليلية

A robust, low-cost analytical device should be user-friendly, rapid, and affordable. Such devices should also be able to operate with scarce samples and ...

The Synthesis of RGD-functionalized Hydrogels as a Tool for Therapeutic Applications

The use of polymers as biomaterials has provided significant advantages in therapeutic applications. In particular, the possibility to modify and functionalize polymer chains with compounds that are able to improve biocompatibility, mechanical properties, or cell viability allows the design of novel materials to meet new challenges in the biomedical field. With the polymer functionalization strategies, click chemistry is a powerful tool to improve cell-compatibility and drug delivery properties of polymeric devices. Similarly, the fundamental need of biomedicine to use sterile tools to avoid potential adverse-side effects, such as toxicity or contamination of the biological environment, gives rise to increasing interest in the microwave-assisted strategy.
The combination of click chemistry and the microwave-assisted method is suitable to produce biocompatible hydrogels with desired functionalities and improved performances in biomedical applications. This work aims to synthesize RGD-functionalized hydrogels. RGD (arginylglycylaspartic acid) is a tripeptide that can mimic cell adhesion proteins and bind to cell-surface receptors, creating a hospitable microenvironment for cells within the 3D polymeric network of the hydrogels. RGD functionalization occurs through Huisgen 1,3-dipolar cycloaddition. Some PAA carboxyl groups are modified with an alkyne moiety, whereas RGD is functionalized with azido acid as the terminal residue of the peptide sequence. Finally, both products are used in a copper catalyzed click reaction to permanently link the peptide to PAA. This modified polymer is used with carbomer, agarose and polyethylene glycol (PEG) to synthesize a hydrogel matrix. The 3D structure is formed due to an esterification reaction involving carboxyl groups from PAA and carbomer and hydroxyl groups from agarose and PEG through microwave-assisted polycondensation. The efficiency of the gelation mechanism ensures a high degree of RGD functionalization. In addition, the procedure to load therapeutic compounds or biological tools within this functionalized network is very simple and reproducible.

We present a protocol for the synthesis of RGD-functionalized hydrogels as devices for cell and drug delivery. The procedure involves copper catalyzed alkyne-azide cycloaddition (CuAAC) between alkyne-modified polyacrylic acid (PAA) and a RGD-azide derivative. The hydrogels are formed using microwave-assisted polycondensation and their physicochemical properties are investigated.

وتوليف الهلاميات المائية functionalized RGD-كأداة للتطبيقات العلاجية

The use of polymers as biomaterials has provided significant advantages in therapeutic applications. In particular, the possibility to modify and ...

Light-mediated Formation and Patterning of Hydrogels for Cell Culture Applications

Click chemistries have been investigated for use in numerous biomaterials applications, including drug delivery, tissue engineering, and cell culture. In particular, light-mediated click reactions, such as photoinitiated thiol&#8722;ene and thiol&#8722;yne reactions, afford spatiotemporal control over material properties and allow the design of systems with a high degree of user-directed property control. Fabrication and modification of hydrogel-based biomaterials using the precision afforded by light and the versatility offered by these thiol&#8722;X photoclick chemistries are of growing interest, particularly for the culture of cells within well-defined, biomimetic microenvironments. Here, we describe methods for the photoencapsulation of cells and subsequent photopatterning of biochemical cues within hydrogel matrices using versatile and modular building blocks polymerized by a thiol&#8722;ene photoclick reaction. Specifically, an approach is presented for constructing hydrogels from allyloxycarbonyl (Alloc)-functionalized peptide crosslinks and pendant peptide moieties and thiol-functionalized poly(ethylene glycol) (PEG) that rapidly polymerize in the presence of lithium acylphosphinate photoinitiator and cytocompatible doses of long wavelength ultraviolet (UV) light. Facile techniques to visualize photopatterning and quantify the concentration of peptides added are described. Additionally, methods are established for encapsulating cells, specifically human mesenchymal stem cells, and determining their viability and activity. While the formation and initial patterning of thiol-alloc hydrogels are shown here, these techniques broadly may be applied to a number of other light and radical-initiated material systems (e.g., thiol-norbornene, thiol-acrylate) to generate patterned substrates.

We describe a sequential process for light-mediated formation and subsequent biochemical patterning of synthetic hydrogel matrices for three-dimensional cell culture applications. The construction and modification of hydrogels with cytocompatible photoclick chemistry is demonstrated. Additionally, facile techniques to quantify and observe patterns and determine cell viability within these hydrogels are presented.

تشكيل الضوء بوساطة والزخرفة من الهلاميات المائية للتطبيقات خلية ثقافة

Click chemistries have been investigated for use in numerous biomaterials applications, including drug delivery, tissue engineering, and cell culture. In ...

Extraction of Plant-based Capsules for Microencapsulation Applications

Microcapsules derived from plant-based spores or pollen provide a robust platform for a diverse range of microencapsulation applications. Sporopollenin exine capsules (SECs) are obtained when spores or pollen are processed so as to remove the internal sporoplasmic contents. The resulting hollow microcapsules exhibit a high degree of micromeritic uniformity and retain intricate microstructural features related to the particular plant species. Herein, we demonstrate a streamlined process for the production of SECs from Lycopodium clavatum spores and for the loading of hydrophilic compounds into these SECs. The current SEC isolation procedure has been recently optimized to significantly reduce the processing requirements which are conventionally used in SEC isolation, and to ensure the production of intact microcapsules. Natural L. clavatum spores are defatted with acetone, treated with phosphoric acid, and extensively washed to remove sporoplasmic contents. After acetone defatting, a single processing step using 85% phosphoric acid has been shown to remove all sporoplasmic contents. By limiting the acid processing time to 30 hr, it is possible to isolate clean SECs and avoid SEC fracturing, which has been shown to occur with prolonged processing time. Extensive washing with water, dilute acids, dilute bases, and solvents ensures that all sporoplasmic material and chemical residues are adequately removed. The vacuum loading technique is utilized to load a model protein (Bovine Serum Albumin) as a representative hydrophilic compound. Vacuum loading provides a simple technique to load various compounds without the need for harsh solvents or undesirable chemicals which are often required in other microencapsulation protocols. Based on these isolation and loading protocols, SECs provide a promising material for use in a diverse range of microencapsulation applications, such as, therapeutics, foods, cosmetics, and personal care products.

This protocol/manuscript describes a streamlined process for the production of sporopollenin exine capsules (SECs) from Lycopodium clavatum spores and for the loading of hydrophilic compounds into these SECs.

كبسولات المستندة إلى مصنع استخراج للتطبيقات الكبسلة

Microcapsules derived from plant-based spores or pollen provide a robust platform for a diverse range of microencapsulation applications. Sporopollenin ...

Rapid Mix Preparation of Bioinspired Nanoscale Hydroxyapatite for Biomedical Applications

Hydroxyapatite (HA) has been widely used as a medical ceramic due to its good biocompatibility and osteoconductivity. Recently there has been interest regarding the use of bioinspired nanoscale hydroxyapatite (nHA). However, biological apatite is known to be calcium-deficient and carbonate-substituted with a nanoscale platelet-like morphology. Bioinspired nHA has the potential to stimulate optimal bone tissue regeneration due to its similarity to bone and tooth enamel mineral. Many of the methods currently used to fabricate nHA both in the laboratory and commercially, involve lengthy processes and complex equipment. Therefore, the aim of this study was to develop a rapid and reliable method to prepare high quality bioinspired nHA. The rapid mixing method developed was based upon an acid-base reaction involving calcium hydroxide and phosphoric acid. Briefly, a phosphoric acid solution was poured into a calcium hydroxide solution followed by stirring, washing and drying stages. Part of the batch was sintered at 1,000 &#176;C for 2 h in order to investigate the products&#39; high temperature stability. X-ray diffraction analysis showed the successful formation of HA, which showed thermal decomposition to &#946;-tricalcium phosphate after high temperature processing, which is typical for calcium-deficient HA. Fourier transform infrared spectroscopy showed the presence of carbonate groups in the precipitated product. The nHA particles had a low aspect ratio with approximate dimensions of 50 x 30 nm, close to the dimensions of biological apatite. The material was also calcium deficient with a Ca:P molar ratio of 1.63, which like biological apatite is lower than the stoichiometric HA ratio of 1.67. This new method is therefore a reliable and far more convenient process for the manufacture of bioinspired nHA, overcoming the need for lengthy titrations and complex equipment. The resulting bioinspired HA product is suitable for use in a wide variety of medical and consumer health applications.

This paper describes a novel method for the rapid manufacture of high quality bioinspired nanoscale hydroxyapatite. This biomaterial is of great significance in the manufacture of a wide range of innovative medical devices for clinical applications in orthopedics, craniofacial surgery and dentistry.

تحضير مزيج سريع من Bioinspired النانو هيدروكسيباتيت للتطبيقات الطبية الحيوية

Hydroxyapatite (HA) has been widely used as a medical ceramic due to its good biocompatibility and osteoconductivity. Recently there has been interest ...

Melt Electrospinning Writing of Three-dimensional Poly(&#949;-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology with great potential for biomedical applications. The technique facilitates the direct deposition of biocompatible polymer fibers to fabricate well-ordered scaffolds in the sub-micron to micro scale range. The establishment of a stable, viscoelastic, polymer jet between a spinneret and a collector is achieved using an applied voltage and can be direct-written. A significant benefit of a typical porous scaffold is a high surface-to-volume ratio which provides increased effective adhesion sites for cell attachment and growth. Controlling the printing process by fine-tuning the system parameters enables high reproducibility in the quality of the printed scaffolds. It also provides a flexible manufacturing platform for users to tailor the morphological structures of the scaffolds to their specific requirements. For this purpose, we present a protocol to obtain different fiber diameters using melt electrospinning writing (MEW) with a guided amendment of the parameters, including flow rate, voltage and collection speed. Furthermore, we demonstrate how to optimize the jet, discuss often experienced technical challenges, explain troubleshooting techniques and showcase a wide range of printable scaffold architectures.

Melt Electrospinning Writing of Three-dimensional Poly(&amp;#949;-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

This protocol serves as a comprehensive guideline to fabricate scaffolds via electrospinning with polymer melts in a direct writing mode. We systematically outline the process and define the appropriate parameter settings for achieving targeted scaffold architectures.

تذوب الكتابة اليكتروسبينينج من السقالات Poly(ε-caprolactone) ثلاثي الأبعاد مع مورفولوجيس يمكن السيطرة عليها لتطبيقات هندسة الأنسجة

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology ...