Funding was provided in part by BU and the NIH R01CA149561. The authors wish to thank the electrospinning/electrospraying team including Stefan Yohe, Eric Falde, Joseph Hersey, and Julia Wang for their helpful discussions and contributions to the preparation and characterization of superhydrophobic biomaterials.

The authors declare that they have no competing financial interests.

生物医学ポリマーから超疎水性材料を構築するための我々のアプローチは、エレクトロスピニングおよびエレクトロスプレーのポリマー加工技術を用いて合成高分子化学を組み合わせたものです。これらの技術はそれぞれ、いずれかの繊維または粒子を提供します。具体的には、ポリカプロラクトン及びポリ（ラクチド- コ -glycolide）系超疎水性材料は、この方法を用いて調製されます...

超疎水性表面は、一般的に明白な水との接触が低い接触角ヒステリシスと150°よりも大きい角度示すものとして分類されます。これらの表面は、1-6湿潤レジスト得られた空気-液体-固体界面を確立するために、低表面エネルギー材料で高い表面粗さを導入することによって作製されます。製造方法、薄膜または多層超疎水性表面に応じて、多層超疎水性基材コーティング、あるいはバルク超疎水性構造を製造することができます。この永久的または半永久的な撥水性は、セルフクリーニング表面7を調製するために使用される有用な特性であり、防汚マイクロ流体デバイス8細胞/タンパク質表面9,10、抗力低減面11、及び薬物送達デバイス12- 15。最近では、刺激応答性超疎水性材料が濡れる状態に非接液を化学によってトリガーされた場合について説明されている、物理的、あるいは環境手がかり（ 例えば 、光、pH、温度、超音波、および現在の電位を/適用）14,16-20、およびこれらの材料は、追加のアプリケーション21-25のための使用を見つけています。 第1の合成超疎水性表面をmethyldihalogenosilanes 26の材料の表面を処理することによって調製され、使用される材料は、 インビボでの使用に適していなかったように、生物医学的用途のために限られた価値ありました。ここで我々は、生体適合性ポリマーからの表面およびバルク超疎水性材料の製造が記載されています。我々のアプローチは、エレクトロスピニングまたはポリエステルとステアリン酸で修飾されたポリ（グリセロールカーボネート）27-30から成る疎水性の共重合体でドープされた主要な成分とする生分解性、生体適合性の脂肪族ポリエステルを含むポリマー混合物をエレクトロスプレーを伴います。製造技術が上とfibe以内強化表面粗さと気孔率を提供それぞれRSまたは粒子、共重合体のドーパントの使用は、ポリエステルとブレンドし、安定27,31,32を電界紡糸またはエレクトロスプレーすることができる低表面エネルギーポリマーを提供します。 ポリ（乳酸）などの脂肪族生分解性ポリエステル（PLA）、ポリ（グリコール酸）（PGA）、ポリ（乳酸- コ -glycolic酸）（PLGA）、ポリカプロラクトン（PCL）は、臨床的に承認されたデバイスで使用されるポリマーでありますおよび生物医学材料研究において顕著なため、それらの非毒性、生分解性、および合成33の容易さ。 PGAおよびPLGAは34〜37、それぞれ、1960年代と1970年代初期における生体吸収性縫合糸としてクリニックにデビュー。それ以来、これらのポリ（ヒドロキシ酸）は、このようなマイクロ38,39およびナノ粒子40,41、ウェハ/ディスク42などの他のアプリケーション固有のフォームファクタ、さまざまなに加工された、27,43メッシュ、44を発泡し、フィルム45 </sup&gt;。 脂肪族ポリエステル、並びに生物医学的関心のある他のポリマー、高表面積および空隙率ならびに引張強度を有するナノまたはマイクロファイバー網状構造を生成するために電界紡糸することができる。 表1は 、様々な生物医学的用途のために合成ポリマーのエレクトロスピニングおよびそれらの対応します参照。エレクトロスピニングおよびエレクトロスプレーは、迅速かつ商業的にスケーラブルな技術です。これらの2つの類似の技術は、それが接地ターゲット46,47に向けられるように、シリンジポンプ設定で溶融/ポリマー溶液の表面張力を克服するために、高電圧（静電反発力）を適用することに依存しています。この技術は、低表面エネルギーのポリマー（例えば、ポリ疎水性ポリマー（カプロラクトンコ -グリセロールモノステアレート））、得られた材料展示超疎水性と関連して使用される場合。 この一般的な合成や材料の処理方法を説明するために、生物医学ポリマーから超疎水性材料を構築するために、我々は、超疎水性polycaprolactone-およびポリ（ラクチド- コ -glycolide）代表例として系材料の合成が記載されています。それぞれの共重合体ドーパントポリ（カプロラクトンコ -グリセロールモノステアレート）およびポリ（ラクチド- コ -グリセロールモノステアレート）は、第1ポリカプロラクトン及びポリ（ラクチド- コ -glycolide）とブレンド、合成され、それぞれ、最終的に電界紡糸またはエレクトロ。得られた材料は、SEMイメージングと接触角の角度測定によって特徴付けられ、 インビトロおよびインビボでの生体適合性について試験されます。最後に、三次元の超疎水性メッシュスルーバルク濡れが造影microcomputed断層撮影法を用いて検討されています。

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>Silicone oil</td>
			<td>Sigma-Aldrich</td>
			<td>85409</td>
			<td></td>
		</tr>
		<tr>
			<td>Cis-2-Phenyl-1,3-dioxan-5-ol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">13468</td>
			<td></td>
		</tr>
		<tr>
			<td>Benzyl bromide</td>
			<td>Sigma-Aldrich</td>
			<td>B17905</td>
			<td>Toxic, lacrymator/eye irritant, use in chemical fume hood</td>
		</tr>
		<tr>
			<td>Potassium hydroxide</td>
			<td>Sigma-Aldrich</td>
			<td align="right">221473</td>
			<td>Corrosive</td>
		</tr>
		<tr>
			<td>Rotary evaporator</td>
			<td>Buchi</td>
			<td>R-124</td>
			<td></td>
		</tr>
		<tr>
			<td>High-vacuum pump</td>
			<td>Welch</td>
			<td align="right">8907</td>
			<td></td>
		</tr>
		<tr>
			<td>Nitrogen, ultra high purity</td>
			<td>Airgas</td>
			<td>NI UHP300</td>
			<td>Compressed gas</td>
		</tr>
		<tr>
			<td>Tetrahydrofuran, stabilized with BHT</td>
			<td>Pharmaco-Aaper</td>
			<td align="right">346000</td>
			<td>Flammable. Dried through column of XXX</td>
		</tr>
		<tr>
			<td>Dichloromethane</td>
			<td>Pharmaco-Aaper</td>
			<td align="right">313000</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Separatory funnel (1 L)</td>
			<td>Fisher Scientific</td>
			<td>13-678-606</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium sulfate</td>
			<td>Sigma-Aldrich</td>
			<td align="right">239313</td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol, absolute</td>
			<td>Pharmaco-Aaper</td>
			<td>111USP200</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Buchner funnel</td>
			<td>Fisher Scientific</td>
			<td>FB-966-F</td>
			<td></td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Pharmaco-Aaper</td>
			<td>339000ACS</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Sigma-Aldrich</td>
			<td align="right">320331</td>
			<td>Corrosive. Diluted to 2N in distilled water.</td>
		</tr>
		<tr>
			<td>Ethyl chloroformate, 97%</td>
			<td>Sigma-Aldrich</td>
			<td align="right">185892</td>
			<td>Toxic, flammable, harmful to environment</td>
		</tr>
		<tr>
			<td>Triethylamine (anhydrous)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">471283</td>
			<td>Toxic, flammable, harmful to environment</td>
		</tr>
		<tr>
			<td>Diethyl ether</td>
			<td>Pharmaco-Aaper</td>
			<td>373ANHACS</td>
			<td>Highly flammable. Purified through XXX column.</td>
		</tr>
		<tr>
			<td>3,6-Dimethyl-1,4-dioxane-2,5-dione (D,L-lactide)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">303143</td>
			<td></td>
		</tr>
		<tr>
			<td>Tin (II) ethylhexanoate</td>
			<td>Sigma-Aldrich</td>
			<td>S3252</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>&#949;-caprolactone (97%)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">704067</td>
			<td></td>
		</tr>
		<tr>
			<td>Toluene, anhydrous</td>
			<td>Sigma-Aldrich</td>
			<td align="right">244511</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Glass syringe</td>
			<td>Hamilton Company</td>
			<td>1700-series</td>
			<td></td>
		</tr>
		<tr>
			<td>Deuterated chloroform</td>
			<td>Cambridge Isotopes Laboratories, Inc.</td>
			<td>DLM-29-10</td>
			<td>Toxic</td>
		</tr>
		<tr>
			<td>Nuclear magnetic resonance instrument</td>
			<td>Varian</td>
			<td>V400</td>
			<td></td>
		</tr>
		<tr>
			<td>Palladium on carbon catalyst</td>
			<td>Strem Chemicals, Inc.</td>
			<td>46-1707</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogenator unit</td>
			<td>Parr</td>
			<td align="right">3911</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogenator shaker vessel</td>
			<td>Parr</td>
			<td>66CA</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogen</td>
			<td>Airgas</td>
			<td>HY HP300</td>
			<td>Highly flammable.</td>
		</tr>
		<tr>
			<td>Diatomaceous earth</td>
			<td>Sigma-Aldrich</td>
			<td align="right">22140</td>
			<td></td>
		</tr>
		<tr>
			<td>2H,2H,3H,3H-perflurononanoic acid</td>
			<td>Oakwood Products, Inc.</td>
			<td align="right">10519</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Stearic acid</td>
			<td>Sigma-Aldrich</td>
			<td>S4751</td>
			<td></td>
		</tr>
		<tr>
			<td>N,N&#8217;-dicyclohexylcarbodiimide</td>
			<td>Sigma-Aldrich</td>
			<td>D80002</td>
			<td>Toxic, irritant.</td>
		</tr>
		<tr>
			<td>4-(dimethylamino) pyridine</td>
			<td>Sigma-Aldrich</td>
			<td align="right">107700</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Hexanes</td>
			<td>Pharmaco-Aaper</td>
			<td>359000ACS</td>
			<td>Toxic, flammable.</td>
		</tr>
		<tr>
			<td>Gel permeation chromatography (GPC) system</td>
			<td>Rainin</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>GPC column</td>
			<td>Waters</td>
			<td>WAT044228</td>
			<td></td>
		</tr>
		<tr>
			<td>Differential scanning calorimeter</td>
			<td>TA Instruments</td>
			<td>Q100</td>
			<td></td>
		</tr>
		<tr>
			<td>Chloroform</td>
			<td>Pharmaco-Aaper</td>
			<td>309000ACS</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>N,N-dimethylformamide</td>
			<td>Sigma-Aldrich</td>
			<td align="right">227056</td>
			<td>Toxic, flammable.</td>
		</tr>
		<tr>
			<td>Polycaprolactone, MW 70-90 kg/mol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">440744</td>
			<td></td>
		</tr>
		<tr>
			<td>Poly(lactide-co-glycolide), MW 136 kg/mol</td>
			<td>Evonik Industries</td>
			<td>LP-712</td>
			<td></td>
		</tr>
		<tr>
			<td>10-mL glass syringe</td>
			<td>Hamilton Company</td>
			<td align="right">81620</td>
			<td></td>
		</tr>
		<tr>
			<td>18 AWG blunt needle</td>
			<td>BRICO Medical Supplies</td>
			<td>BN1815</td>
			<td></td>
		</tr>
		<tr>
			<td>Electrospinner enclosure box</td>
			<td>Custom-built</td>
			<td>N/A</td>
			<td>Made of acrylic panels</td>
		</tr>
		<tr>
			<td>High voltage DC supply</td>
			<td>Glassman High Voltage, Inc.</td>
			<td>PS/EL30R01.5</td>
			<td>High voltages, electrocution hazard</td>
		</tr>
		<tr>
			<td>Linear (translating) stage</td>
			<td>Servo Systems Co.</td>
			<td>LPS-12-20-0.2</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Programmable motor &#38; power supply</td>
			<td>Intelligent Motion Systems, Inc.</td>
			<td>MDrive23 Plus</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>24V DC motor &#38; power supply</td>
			<td>McMaster-Carr</td>
			<td>6331K32</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Aluminum collector drum</td>
			<td>Custom-built</td>
			<td></td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Syringe pump</td>
			<td>Fisher Scientific</td>
			<td>78-0100I</td>
			<td></td>
		</tr>
		<tr>
			<td>Inverted optical microscope</td>
			<td>Olympus</td>
			<td>IX70</td>
			<td></td>
		</tr>
		<tr>
			<td>Scanning electron microscope</td>
			<td>Carl Zeiss</td>
			<td>Supra V55</td>
			<td></td>
		</tr>
		<tr>
			<td>Conductive copper tape</td>
			<td>3M</td>
			<td align="right">16072</td>
			<td></td>
		</tr>
		<tr>
			<td>Aluminum SEM stubs</td>
			<td>Electron Microscopy Sciences</td>
			<td align="right">75200</td>
			<td></td>
		</tr>
		<tr>
			<td>Contact angle goniometer</td>
			<td>Kruss</td>
			<td>DSA100</td>
			<td></td>
		</tr>
		<tr>
			<td>Propylene glycol</td>
			<td>Sigma-Aldrich</td>
			<td>W294004</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Ethylene glycol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">324558</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Ioxaglate</td>
			<td>Guerbet</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Fetal bovine serum</td>
			<td>American Type Culture Collection</td>
			<td>30-2020</td>
			<td></td>
		</tr>
		<tr>
			<td>Micro-computed tomography instrument</td>
			<td>Scanco</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Image analysis software (Analyze)</td>
			<td>Mayo Clinic</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Tensile tester</td>
			<td>Instron</td>
			<td align="right">5848</td>
			<td></td>
		</tr>
		<tr>
			<td>Micrometer</td>
			<td>Multitoyo</td>
			<td>293-340</td>
			<td></td>
		</tr>
		<tr>
			<td>Calipers</td>
			<td>Fisher Scientific</td>
			<td>14-648-17</td>
			<td></td>
		</tr>
	</tbody>
</table>

fabricating superhydrophobic polymeric materials for biomedical applications

永久的または準安定非接液状態を有する表面を有する超撥水材料は、生物医学および産業用アプリケーションの数について興味深いものです。ここでは、ポリエステルから成る疎水性の共重合体でドープされた主要なコンポーネント、およびstearate-として、生分解性、生体適合性脂肪族ポリエステル（例えば、ポリカプロラクトン及びポリ（ラクチド- コ -glycolide））を含むポリマー混合物をエレクトロスピニングまたはエレクトロスプレー方法を説明します変性ポリ（グリセロールカーボネート）は超疎水性生体材料を提供します。エレクトロスピニングまたはエレクトロスプレーの製造技術は、それぞれ、上および繊維や粒子内に強化された表面粗さと気孔率を提供しています。ポリエステルとのブレンド及び安定エレクトロスピニングまたはエレクトロスプレーすることができる低表面エネルギーコポリマードーパントの使用は、これらの超疎水性物質が得られます。そのような繊維サイズ、コポリマードーパント組成物および/またはCOなどの重要なパラメータncentration、濡れ性への影響が議論されています。ポリマー化学およびプロセス工学のこの組み合わせは、おそらく、様々な用途のためのポリマーのより広いクラスに一般化されているスケーラブルな技法を使用して、アプリケーション固有の材料を開発するための多目的なアプローチを提供します。

化学変換の一連の官能カーボネートモノマー、5-ベンジルオキシ-1,3-ジオキサン-2-オンを白色の結晶性固体（ 図1A）として合成される。1 H NMRは、構造（ 図1B）および質量分析法を確認し元素分析は、組成物を確認してください。この固体を、次いで140℃の錫触媒開環反応を使用してD、Lラクチドまたはεカプロラクトンのいずれかと共重合されます。沈?...

Watch this Scientific Journal Video about Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications at JoVE.com

Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications

Two- and three-dimensional superhydrophobic polymeric materials are prepared by electrospinning or electrospraying biodegradable polymers blended with a lower surface energy polymer of similar composition.

バイオメディカル応用のための超疎水性高分子材料を製造します

Superhydrophobic materials, with surfaces possessing permanent or metastable non-wetted states, are of interest for a number of biomedical and industrial ...

fabricating-superhydrophobic-polymeric-materials-for-biomedical

Research

Education

JoVE Core

JoVE Journal

Organic Chemistry

Bioengineering

Unit 1

Synthetic Polymers

SCIENTISTS IN ACTION

19.0K ビュー.  Boston University. Two- and three-dimensional superhydrophobic polymeric materials are prepared by electrospinning or electrospraying biodegradable polymers blended with a lower surface energy polymer of similar composition. 

ビデオ: Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications

Graphene Coatings for Biomedical Implants

Atomically smooth graphene as a surface coating has potential to improve implant properties. This demonstrates a method for coating nitinol alloys with nanometer thick layers of graphene for applications as a stent material. Graphene was grown on copper substrates via chemical vapor deposition and then transferred onto nitinol substrates. In order to understand how the graphene coating could change biological response, cell viability of rat aortic endothelial cells and rat aortic smooth muscle cells was investigated. Moreover, the effect of graphene-coatings on cell adhesion and morphology was examined with fluorescent confocal microscopy. Cells were stained for actin and nuclei, and there were noticeable differences between pristine nitinol samples compared to graphene-coated samples. Total actin expression from rat aortic smooth muscle cells was found using western blot. Protein adsorption characteristics, an indicator for potential thrombogenicity, were determined for serum albumin and fibrinogen with gel electrophoresis. Moreover, the transfer of charge from fibrinogen to substrate was deduced using Raman spectroscopy. It was found that graphene coating on nitinol substrates met the functional requirements for a stent material and improved the biological response compared to uncoated nitinol. Thus, graphene-coated nitinol is a viable candidate for a stent material.

Graphene offers potential as a coating material for biomedical implants. In this study we demonstrate a method for coating nitinol alloys with nanometer thick layers of graphene and determine how graphene may influence implant response.

メディカルインプラントのグラフェンコーティング

Atomically smooth graphene as a surface coating has potential to improve implant properties. This demonstrates a method for coating nitinol alloys with ...

生物工学

Designing Silk-silk Protein Alloy Materials for Biomedical Applications

Fibrous proteins display different sequences and structures that have been used for various applications in biomedical fields such as biosensors, nanomedicine, tissue regeneration, and drug delivery. Designing materials based on the molecular-scale interactions between these proteins will help generate new multifunctional protein alloy biomaterials with tunable properties. Such alloy material systems also provide advantages in comparison to traditional synthetic polymers due to the materials biodegradability, biocompatibility, and tenability in the body. This article used the protein blends of wild tussah silk (Antheraea pernyi) and domestic mulberry silk (Bombyx mori) as an example to provide useful protocols regarding these topics, including how to predict protein-protein interactions by computational methods, how to produce protein alloy solutions, how to verify alloy systems by thermal analysis, and how to fabricate variable alloy materials including optical materials with diffraction gratings, electric materials with circuits coatings, and pharmaceutical materials for drug release and delivery. These methods can provide important information for designing the next generation multifunctional biomaterials based on different protein alloys.

Blending is an efficient approach to generate biomaterials with a broad range of properties and combined features. By predicting the molecular interactions between different natural silk proteins, new silk-silk protein alloy platforms with tunable mechanical resiliency, electrical response, optical transparency, chemical processability, biodegradability, or thermal stability can be designed.

バイオメディカル応用のためのシルクシルクプロテイン合金材料設計

Fibrous proteins display different sequences and structures that have been used for various applications in biomedical fields such as biosensors, ...

Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness and low bioactivity of metals. In this study, we have developed a new method towards fabricating a new type of bioactive and mechanically reliable porous metal scaffolds-densified porous Ti scaffolds. The method consists of two fabrication processes, 1) the fabrication of porous Ti scaffolds by dynamic freeze casting, and 2) coating and densification of the porous scaffolds. The dynamic freeze casting method to fabricate porous Ti scaffolds allowed the densification of porous scaffolds by minimizing the chemical contamination and structural defects. The densification process is distinctive for three reasons. First, the densification process is simple, because it requires a control of only one parameter (degree of densification). Second, it is effective, as it achieves mechanical enhancement and sustainable release of biomolecules from porous scaffolds. Third, it has broad applications, as it is also applicable to the fabrication of functionally graded porous scaffolds by spatially varied strain during densification.

Bioactive and mechanically reliable metal scaffolds have been fabricated through a method which consists of two processes, dynamic freeze casting for the fabrication of porous Ti, and coating and densification of the Ti scaffolds. The densification process is simple, effective and applicable to the fabrication of functionally graded scaffolds.

バイオメディカル応用のための機械的に調整可能な生物活性金属スキャフォールドの作製

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness ...

Fabricating Cotton Analytical Devices

A robust, low-cost analytical device should be user-friendly, rapid, and affordable. Such devices should also be able to operate with scarce samples and provide information for follow-up treatment. Here, we demonstrate the development of a cotton-based urinalysis (i.e., nitrite, total protein, and urobilinogen assays) analytical device that employs a lateral flow-based format, and is inexpensive, easily fabricated, rapid, and can be used to conduct multiple tests without cross-contamination worries. Cotton is composed of cellulose fibers with natural absorptive properties that can be leveraged for flow-based analysis. The simple but elegant fabrication process of our cotton-based analytical device is described in this study. The arrangement of the cotton structure and test pad takes advantage of the hydrophobicity and absorptive strength of each material. Because of these physical characteristics, colorimetric results can persistently adhere to the test pad. This device enables physicians to receive clinical information in a timely manner and shows great potential as a tool for early intervention.

To investigate simple fabrication approaches for multiple assay needs, we created a fluid-absorbing channel system made of cotton material. This device was used to establish a multiple detection platform, and solve contamination issues that commonly affect lateral flow-based biomedical devices, for clinical urinalysis of nitrite, total protein, and urobilinogen.

コットン分析デバイスを製造します

A robust, low-cost analytical device should be user-friendly, rapid, and affordable. Such devices should also be able to operate with scarce samples and ...

The Synthesis of RGD-functionalized Hydrogels as a Tool for Therapeutic Applications

The use of polymers as biomaterials has provided significant advantages in therapeutic applications. In particular, the possibility to modify and functionalize polymer chains with compounds that are able to improve biocompatibility, mechanical properties, or cell viability allows the design of novel materials to meet new challenges in the biomedical field. With the polymer functionalization strategies, click chemistry is a powerful tool to improve cell-compatibility and drug delivery properties of polymeric devices. Similarly, the fundamental need of biomedicine to use sterile tools to avoid potential adverse-side effects, such as toxicity or contamination of the biological environment, gives rise to increasing interest in the microwave-assisted strategy.
The combination of click chemistry and the microwave-assisted method is suitable to produce biocompatible hydrogels with desired functionalities and improved performances in biomedical applications. This work aims to synthesize RGD-functionalized hydrogels. RGD (arginylglycylaspartic acid) is a tripeptide that can mimic cell adhesion proteins and bind to cell-surface receptors, creating a hospitable microenvironment for cells within the 3D polymeric network of the hydrogels. RGD functionalization occurs through Huisgen 1,3-dipolar cycloaddition. Some PAA carboxyl groups are modified with an alkyne moiety, whereas RGD is functionalized with azido acid as the terminal residue of the peptide sequence. Finally, both products are used in a copper catalyzed click reaction to permanently link the peptide to PAA. This modified polymer is used with carbomer, agarose and polyethylene glycol (PEG) to synthesize a hydrogel matrix. The 3D structure is formed due to an esterification reaction involving carboxyl groups from PAA and carbomer and hydroxyl groups from agarose and PEG through microwave-assisted polycondensation. The efficiency of the gelation mechanism ensures a high degree of RGD functionalization. In addition, the procedure to load therapeutic compounds or biological tools within this functionalized network is very simple and reproducible.

We present a protocol for the synthesis of RGD-functionalized hydrogels as devices for cell and drug delivery. The procedure involves copper catalyzed alkyne-azide cycloaddition (CuAAC) between alkyne-modified polyacrylic acid (PAA) and a RGD-azide derivative. The hydrogels are formed using microwave-assisted polycondensation and their physicochemical properties are investigated.

治療用途のためのツールとしてのRGD官能ヒドロゲルの合成

The use of polymers as biomaterials has provided significant advantages in therapeutic applications. In particular, the possibility to modify and ...

Light-mediated Formation and Patterning of Hydrogels for Cell Culture Applications

Click chemistries have been investigated for use in numerous biomaterials applications, including drug delivery, tissue engineering, and cell culture. In particular, light-mediated click reactions, such as photoinitiated thiol&#8722;ene and thiol&#8722;yne reactions, afford spatiotemporal control over material properties and allow the design of systems with a high degree of user-directed property control. Fabrication and modification of hydrogel-based biomaterials using the precision afforded by light and the versatility offered by these thiol&#8722;X photoclick chemistries are of growing interest, particularly for the culture of cells within well-defined, biomimetic microenvironments. Here, we describe methods for the photoencapsulation of cells and subsequent photopatterning of biochemical cues within hydrogel matrices using versatile and modular building blocks polymerized by a thiol&#8722;ene photoclick reaction. Specifically, an approach is presented for constructing hydrogels from allyloxycarbonyl (Alloc)-functionalized peptide crosslinks and pendant peptide moieties and thiol-functionalized poly(ethylene glycol) (PEG) that rapidly polymerize in the presence of lithium acylphosphinate photoinitiator and cytocompatible doses of long wavelength ultraviolet (UV) light. Facile techniques to visualize photopatterning and quantify the concentration of peptides added are described. Additionally, methods are established for encapsulating cells, specifically human mesenchymal stem cells, and determining their viability and activity. While the formation and initial patterning of thiol-alloc hydrogels are shown here, these techniques broadly may be applied to a number of other light and radical-initiated material systems (e.g., thiol-norbornene, thiol-acrylate) to generate patterned substrates.

We describe a sequential process for light-mediated formation and subsequent biochemical patterning of synthetic hydrogel matrices for three-dimensional cell culture applications. The construction and modification of hydrogels with cytocompatible photoclick chemistry is demonstrated. Additionally, facile techniques to quantify and observe patterns and determine cell viability within these hydrogels are presented.

細胞培養アプリケーションのためのヒドロゲルの光媒介形成とパターニング

Click chemistries have been investigated for use in numerous biomaterials applications, including drug delivery, tissue engineering, and cell culture. In ...

Extraction of Plant-based Capsules for Microencapsulation Applications

Microcapsules derived from plant-based spores or pollen provide a robust platform for a diverse range of microencapsulation applications. Sporopollenin exine capsules (SECs) are obtained when spores or pollen are processed so as to remove the internal sporoplasmic contents. The resulting hollow microcapsules exhibit a high degree of micromeritic uniformity and retain intricate microstructural features related to the particular plant species. Herein, we demonstrate a streamlined process for the production of SECs from Lycopodium clavatum spores and for the loading of hydrophilic compounds into these SECs. The current SEC isolation procedure has been recently optimized to significantly reduce the processing requirements which are conventionally used in SEC isolation, and to ensure the production of intact microcapsules. Natural L. clavatum spores are defatted with acetone, treated with phosphoric acid, and extensively washed to remove sporoplasmic contents. After acetone defatting, a single processing step using 85% phosphoric acid has been shown to remove all sporoplasmic contents. By limiting the acid processing time to 30 hr, it is possible to isolate clean SECs and avoid SEC fracturing, which has been shown to occur with prolonged processing time. Extensive washing with water, dilute acids, dilute bases, and solvents ensures that all sporoplasmic material and chemical residues are adequately removed. The vacuum loading technique is utilized to load a model protein (Bovine Serum Albumin) as a representative hydrophilic compound. Vacuum loading provides a simple technique to load various compounds without the need for harsh solvents or undesirable chemicals which are often required in other microencapsulation protocols. Based on these isolation and loading protocols, SECs provide a promising material for use in a diverse range of microencapsulation applications, such as, therapeutics, foods, cosmetics, and personal care products.

This protocol/manuscript describes a streamlined process for the production of sporopollenin exine capsules (SECs) from Lycopodium clavatum spores and for the loading of hydrophilic compounds into these SECs.

マイクロカプセル化アプリケーション用の抽出プラントベースのカプセル

Microcapsules derived from plant-based spores or pollen provide a robust platform for a diverse range of microencapsulation applications. Sporopollenin ...

Rapid Mix Preparation of Bioinspired Nanoscale Hydroxyapatite for Biomedical Applications

Hydroxyapatite (HA) has been widely used as a medical ceramic due to its good biocompatibility and osteoconductivity. Recently there has been interest regarding the use of bioinspired nanoscale hydroxyapatite (nHA). However, biological apatite is known to be calcium-deficient and carbonate-substituted with a nanoscale platelet-like morphology. Bioinspired nHA has the potential to stimulate optimal bone tissue regeneration due to its similarity to bone and tooth enamel mineral. Many of the methods currently used to fabricate nHA both in the laboratory and commercially, involve lengthy processes and complex equipment. Therefore, the aim of this study was to develop a rapid and reliable method to prepare high quality bioinspired nHA. The rapid mixing method developed was based upon an acid-base reaction involving calcium hydroxide and phosphoric acid. Briefly, a phosphoric acid solution was poured into a calcium hydroxide solution followed by stirring, washing and drying stages. Part of the batch was sintered at 1,000 &#176;C for 2 h in order to investigate the products&#39; high temperature stability. X-ray diffraction analysis showed the successful formation of HA, which showed thermal decomposition to &#946;-tricalcium phosphate after high temperature processing, which is typical for calcium-deficient HA. Fourier transform infrared spectroscopy showed the presence of carbonate groups in the precipitated product. The nHA particles had a low aspect ratio with approximate dimensions of 50 x 30 nm, close to the dimensions of biological apatite. The material was also calcium deficient with a Ca:P molar ratio of 1.63, which like biological apatite is lower than the stoichiometric HA ratio of 1.67. This new method is therefore a reliable and far more convenient process for the manufacture of bioinspired nHA, overcoming the need for lengthy titrations and complex equipment. The resulting bioinspired HA product is suitable for use in a wide variety of medical and consumer health applications.

This paper describes a novel method for the rapid manufacture of high quality bioinspired nanoscale hydroxyapatite. This biomaterial is of great significance in the manufacture of a wide range of innovative medical devices for clinical applications in orthopedics, craniofacial surgery and dentistry.

バイオメディカル応用のためのバイオインスパイアードナノハイドロキシアパタイトの急速なミックス準備

Hydroxyapatite (HA) has been widely used as a medical ceramic due to its good biocompatibility and osteoconductivity. Recently there has been interest ...

Melt Electrospinning Writing of Three-dimensional Poly(&#949;-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology with great potential for biomedical applications. The technique facilitates the direct deposition of biocompatible polymer fibers to fabricate well-ordered scaffolds in the sub-micron to micro scale range. The establishment of a stable, viscoelastic, polymer jet between a spinneret and a collector is achieved using an applied voltage and can be direct-written. A significant benefit of a typical porous scaffold is a high surface-to-volume ratio which provides increased effective adhesion sites for cell attachment and growth. Controlling the printing process by fine-tuning the system parameters enables high reproducibility in the quality of the printed scaffolds. It also provides a flexible manufacturing platform for users to tailor the morphological structures of the scaffolds to their specific requirements. For this purpose, we present a protocol to obtain different fiber diameters using melt electrospinning writing (MEW) with a guided amendment of the parameters, including flow rate, voltage and collection speed. Furthermore, we demonstrate how to optimize the jet, discuss often experienced technical challenges, explain troubleshooting techniques and showcase a wide range of printable scaffold architectures.

This protocol serves as a comprehensive guideline to fabricate scaffolds via electrospinning with polymer melts in a direct writing mode. We systematically outline the process and define the appropriate parameter settings for achieving targeted scaffold architectures.

組織工学的応用の制御可能な形態の三次元 Poly(ε-caprolactone) 足場のエレクトロスピニング記述を溶かす

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology ...

Three-dimensional Printing of Thermoplastic Materials to Create Automated Syringe Pumps with Feedback Control for Microfluidic Applications

Microfluidics has become a critical tool in research across the biological, chemical, and physical sciences. One important component of microfluidic experimentation is a stable fluid handling system capable of accurately providing an inlet flow rate or inlet pressure. Here, we have developed a syringe pump system capable of controlling and regulating the inlet fluid pressure delivered to a microfluidic device. This system was designed using low-cost materials and additive manufacturing principles, leveraging three-dimensional (3D) printing of thermoplastic materials and off-the-shelf components whenever possible. This system is composed of three main components: a syringe pump, a pressure transducer, and a programmable microcontroller. Within this paper, we detail a set of protocols for fabricating, assembling, and programming this syringe pump system. Furthermore, we have included representative results that demonstrate high-fidelity, feedback control of inlet pressure using this system. We expect this protocol will allow researchers to fabricate low-cost syringe pump systems, lowering the entry barrier for the use of microfluidics in biomedical, chemical, and materials research.

Here we present a protocol to construct a pressure-controlled syringe pump to be used in microfluidic applications. This syringe pump is made from an&#160;additively manufactured body, off-the-shelf hardware, and open-source electronics. The resulting system is low-cost, straightforward to build, and delivers well-regulated fluid flow to enable rapid microfluidic research.

印刷作成する熱可塑性材料の三次元マイクロ流体用フィードバック制御を用いたシリンジ ポンプを自動

Microfluidics has become a critical tool in research across the biological, chemical, and physical sciences. One important component of microfluidic ...