This research was supported by the Australian Research council. ARC Grant # DP110101511 given to JB; National Sciences and Engineering Research Council, NSERC of Canada Grant # RGPIN121713-11 given to FK ; ARC grant # DP130102580 and DP110104553 to DRB.

1. Prescreening
<ol>
	<li>Prior to testing, obtain written and informed consent from each participant.</li>
	<li>Ask the subject if they have normal or corrected-to-normal acuity (i.e. glasses).</li>
	<li>Verify the stereo acuity of the participant using a simple handheld stereo test.</li>
</ol>
2. Achieving Binocular Fusion in the Stereoscope
<ol>
	<li>Seat the participant at the desk in front of the mirror stereoscope and adjust the height of their chair for comfort.</li>
	<li>Turn off the lights so that they may dark adapt for a minimum of 3 min. The visual system performs best when it is adapted to the prevailing lighting conditions.</li>
	<li>Have the participant look through the stereoscope. They will see a cross displayed on the monitor for each eye. They must adjust the horizontal position of the fixation crosses until they see one cross only, in the center of their field of view. If they see two&#160;crosses, then this separation is incorrect and horizontal adjustment is needed. The targets are centered on the crosses when displayed and this procedure ensures fusion at the correct distance.</li>
	<li>The participant is now ready to commence the experiment.</li>
</ol>
3. Task Instructions for the Observer
<ol>
	<li>&#34;On each trial you will see two curves that have rotation-in-depth (RID). You are required to decide which of the two curves has a greater RID, in other words which is more rotated away from your view. Press the left mouse button if the first stimulus has a greater RID. Press the right mouse button if the second curve has more RID.&#34;</li>
	<li>&#34;This is a forced-choice task in which the next trial does not commence until a response has been made to a previous trial.&#34;</li>
	<li>&#34;If you are not sure which stimulus has more RID,&#160;please take your best guess.&#34;</li>
</ol>
4. Measuring Sensitivity to Viewpoint Change/RID in Contours
<ol>
	<li>To evaluate the role of stereoscopic cues in judgments of RID, the performance of the participant is measured separately in conditions where stereoscopic cues to RID are presented (stereo conditions) and where they are not presented (nonstereo conditions). To present stereoscopic cues, the computer displays a different RID angle of curve to each eye of the observer, through the stereoscope. To present the curves without stereo cues, the computer presents the same RID curve to both eyes (see Figure 2 for an example of this). The methodological steps below are then repeated for both conditions.</li>
	<li>Initiate the procedure, composed of 140 trials, for the participant. Note: The Method of Constant Stimuli (MOCS13) is used to ensure equal numbers of trials for each value of RID of the test curve employed. The RIDs can be either greater than, less than or equal to 45&#176;, with the particular value being randomly chosen from the set for each trial. The RID of the reference curve is held constant at 45&#176; RID. The presentation order of reference and test stimuli is randomized on each trial.</li>
	<li>Allow the program to record how often the participant chooses the test as being at the greater RID angle.</li>
	<li>Give the participants a break after each block of trials. In this example the 140 trials are made up of 20 repetitions at each of 7 different RID angles for the test curve: 3 angles less than 45&#176;, 3 angles greater than 45&#176; and 1 RID at precisely 45&#176; -&#160;the same as the reference curve.</li>
	<li>At the end of each run the computer plots out data describing the proportion of times that the participant chose the test stimulus as being at a RID angle greater than 45&#176;, as a function of the presented RID angle (see example data points in Figure 4).</li>
	<li>Let the software fit the data with a Cumulative Gaussian function in order to determine the precision with which they are able to make the RID discrimination. This precision is given by the parameter of the fitted function that determines slope (see example solid lines in Figure 4).</li>
	<li>Obtain the slope from each plot. The slope estimates for the stereo and nonstereo conditions can then be statistically compared in order to determine whether stereoscopic cues have contributed to an observer&#8217;s ability to detect a change in RID.</li>
</ol>

<ol>
	<li>Bennett, D. J., Vuong, Q. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+stereo+advantage+in+generalizing+over+changes+in+viewpoint+on+object+recognition+tasks.">A stereo advantage in generalizing over changes in viewpoint on object recognition tasks.</a> Percep. Psychophys. 68, 1082-1093 (2006).</li><li>Bulthoff, H. H., Edelman, S. Y., Tarr, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=How+are+three-dimensional+objects+represented+in+the+brain?.">How are three-dimensional objects represented in the brain?.</a> Cereb. Cortex. 5, 247-260 (1995).</li><li>Burke, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Combining+disparate+views+of+objects:+Viewpoint+costs+are+reduced+by+stereopsis.">Combining disparate views of objects: Viewpoint costs are reduced by stereopsis.</a> Vis. Cogn. 12, 705-719 (2005).</li><li>Burke, D., Taubert, J., Higman, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Are+face+representations+viewpoint+dependent?+A+stereo+advantage+for+generalising+across+different+views+of+faces.">Are face representations viewpoint dependent? A stereo advantage for generalising across different views of faces.</a> Vis. Res. 47, 2164-2169 (2007).</li><li>Edelman, S., Bulthoff, H. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Orientation+dependence+in+the+recognition+of+familiar+and+novel+views+of+three-dimensional+objects.">Orientation dependence in the recognition of familiar and novel views of three-dimensional objects.</a> Vis. Res. 32, 2385-2400 (1992).</li><li>Lim Lee, Y., Saunders, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stereo+improves+3D+shape+discrimination+even+when+rich+monocular+shape+cues+are+available.">Stereo improves 3D shape discrimination even when rich monocular shape cues are available.</a> J. Vis. 11, (2011).</li><li>Parr, L. A., Siebert, E., Taubert, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+familiarity+and+viewpoint+on+face+recognition+in+chimpanzees.">Effect of familiarity and viewpoint on face recognition in chimpanzees.</a> Perception. 40, 863-872 (2011).</li><li>Bell, J., Dickinson, J. E., Badcock, D. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Radial+frequency+adaptation+suggests+polar-based+coding+of+local+shape+cues.">Radial frequency adaptation suggests polar-based coding of local shape cues.</a> Vis. Res. 48, 2293-2301 (2008).</li><li>Wade, N. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+the+late+invention+of+the+stereoscope.">On the late invention of the stereoscope.</a> Perception. 16, 785-818 (1987).</li><li>Bell, J., Kanji, J., Kingdom, F. A. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Discrimination+of+rotated-in-depth+curves+is+facilitated+by+stereoscopic+cues,+but+curvature+is+not+tuned+for+stereoscopic+rotation-in-depth.">Discrimination of rotated-in-depth curves is facilitated by stereoscopic cues, but curvature is not tuned for stereoscopic rotation-in-depth.</a> Vis. Res. 77, 14-20 (2013).</li><li>Regan, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Human Perception of Objects. , (2000).</li><li>Howard, I. P., Rogers, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Binocular Vision and Stereopsis. , (1995).</li><li>Kingdom, F. A. A., Prins, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Psychophysics: A Practical Introduction. , (2010).</li><li>Kingdom, F. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Color+brings+relief+to+human+vision.">Color brings relief to human vision.</a> Nat. Neurosci. 6, 641-644 (2003).</li><li>Ustinova, K. I., Perkins, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gaze+and+viewing+angle+influence+visual+stabilization+of+upright+posture.">Gaze and viewing angle influence visual stabilization of upright posture.</a> Brain Behav. 1, 19-25 (1002).</li><li>Shieh, K. -. K., Lee, D. -. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preferred+viewing+distance+and+screen+angle+of+electronic+paper+displays.">Preferred viewing distance and screen angle of electronic paper displays.</a> Appl. Ergon. 38, 601-608 (2007).</li></ol>

The authors declare that they have no competing financial interests. The first author Jason Bell, is a full-time employee of the Australian National University; David Badcock and J Edwin Dickinson are full-time employees of the University of Western Australia; Fred&#160;Kingdom is a full-time employee of McGill University.

The methods discussed in this communication can be used by any researcher seeking to address questions related to discrimination and/or recognition of viewpoint rotated objects. Importantly, the method of perspective projection is not limited to the stimuli demonstrated here; instead it can be applied to a wide range of experimental stimuli, from lines to pictures of complex objects. Our introduction describes ways to apply this transformation using custom software, or library software such as MATLAB.
<p class="jove_...

Many studies have shown that the speed and accuracy of object recognition is compromised by a change in viewpoint1-7. For example, face recognition is best when the face is viewed in the fronto-parallel plane, i.e. &#34;front on&#34;, and declines systematically as the face is rotated in depth away from the fronto-parallel plane. Changes in viewpoint can occur either when the observer, or the viewed object, moves. Importantly, the viewpoint cost is often reduced by the introduction of stereoscopic cues to the observer1-4,6,8. It is, however, important to distinguish between the rotation of 3D and planar objects. The former may reveal new textures or structural information under rotation while this does not occur with planar objects. In this communication we discuss a method for simulating the appearance of planar shapes and objects that have been subject to rotation-in-depth, or RID. We describe an apparatus for turning the two-dimensional projection of a RID image into a vivid 3D (three-dimensional) percept of RID that is based on the Wheatstone mirror stereoscope9. Finally, we report a psychophysical method for determining whether stereoscopic (3D) cues influence our sensitivity to viewpoint change. Movie 1 demonstrates how the appearance of a shape is altered by a viewpoint change/RID.
Simulating a Viewpoint Change
When an object is subject to RID it does not of course physically change in identity or shape. However from the observer&#8217;s viewpoint, the shape does change. For instance, if you hold a sheet of paper directly in front of you in landscape view, the image of the paper in your eye, termed the retinal image, is a horizontal rectangle. If you then rotate the paper around its central vertical axis, the retinal image becomes foreshortened along the horizontal (see Figure 1 for a demonstration). Ultimately, if you rotate the paper through 90&#176; the retinal image is a thin strip the thickness of the paper. Thus the largest change to the image of the sheet of paper that has been subject to RID is a horizontal compression of its shape. A smaller change gradient of change occurs in the vertical extent with the image being taller for the nearest edge unchanged at the axis of rotation and shorter for the farther edge.
A RID can be simulated by appropriate transformation of images using software packages or by writing one&#8217;s own code8,10. Readers wishing to know more about RID can consult relevant texts and websites concerned with viewpoint transformations, or learn about built-in functions in the image processing software of packages such as those listed in our Materials. However, when transforming an image of a stimulus on a screen to represent a particular angle of RID there is an additional consideration: which type of projection to use, orthographic or perspective? When we view a scene, nearby objects produce larger retinal images than farther away objects. For a 2D (two-dimensional) object that is subject to RID this means that the far side is compressed more than the near side, as Figure 1 illustrates (see in particular the bottom right figure which has a RID of 60&#176;). The magnitude of the compression asymmetry is dependent upon the size of the object being subject to RID, and on our distance from it. Perspective projection incorporates this compression asymmetry whereas orthographic projection simply ignores it by assigning the same dimensions to the near and far sides of the RID object. Since an observer viewing a planar object rotate will be presented with this asymmetry we will use perspective projection here. Another advantage of our method is that the projection takes into account viewing distance from observer to screen. We have previously used our RID method to simulate viewpoint rotated shapes in both 2D perspective projection and in 3D8,10.
Simulating a 3D Viewpoint Change
In order to simulate stereoscopic RID one needs to present slightly different images to the left and right eyes. This difference between the two images is known as binocular disparity11, and is a function of both viewing distance and between-eye separation, specifically the inter-pupillary distance. Returning to the example of our sheet of paper in landscape view, if we rotate the piece of paper around the vertical center, clockwise by 45&#176; (so the left edge is receding), each eye&#8217;s view of the paper is slightly different. The image projected onto the left eye is slightly less than 45&#176; rotation while the image projected onto the right eye is slightly more than 45&#176; rotation (see Figure 2 for an illustration - observers who can free fuse the top two images will perceive a RID in 3D). If the appropriate RID angles are presented separately to the left and right eyes (the stereo condition) they will produce a disparity gradient and the observer is likely to report a vivid impression of a 3D RID. However if identical images, representing a 45&#176; rotation from the central viewing point, are presented to both eyes (the nonstereo condition) the observer will see a 2D representation of the RID stimuli. An established method for presenting separate images to the left and right eyes using a single monitor is to use a modification of the mirror stereoscope originally developed by Sir Charles Wheatstone in the mid 19th century12 &#8211; see Figure&#160;3. When the two stereo-half-images are positioned at corresponding locations in each eye&#8217;s view, they can be binocularly fused to produce a 3D percept (see Howard and Rogers12 for an extensive review of stereo methods and limitations).
By combining a simulated viewpoint change with stereoscopic presentation we can determine, for example, the role that stereoscopic cues play in our ability to detect changes in viewpoint. The demonstration results below reveal that when the size of a planar object, in this case a curved contour, is known or familiar to the observer, the change in the 2D width of the curve (sometimes termed its sag) is used to detect the change in RID, i.e. viewpoint (see Bell et al.10 for the full manuscript on this effect). Below we describe in detail a psychophysical method for measuring sensitivity to RID change for 2D- and 3D-defined planar shapes.

<table border="0" cellpadding="0" cellspacing="0" width="775">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="63">
			<td height="63" style="height:63px;width:216px;">Stereo testing</td>
			<td style="width:127px;">http://www.stereooptical.com/products/stereotests</td>
			<td style="width:152px;">Titmus stereofly test</td>
			<td style="width:280px;">Handheld testing devices</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Prebuilt stereo devices</td>
			<td style="width:127px;">http://www.stereoaids.com.au</td>
			<td style="width:152px;">prebuilt stereoscopes</td>
			<td>Suitable for desktop and laptop computers</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Mirror stereoscope</td>
			<td style="width:127px;">Custom made; or, Edmundoptics</td>
			<td style="width:152px;">8 mirror stereoscope</td>
			<td>www.edmundoptics.com</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Graphics card</td>
			<td style="width:127px;">NVidia</td>
			<td style="width:152px;"></td>
			<td>NVidia or ATI recommended</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Experimental control software</td>
			<td style="width:127px;">MATLAB</td>
			<td style="width:152px;"></td>
			<td>MATLAB, Python, C++, Visual Basic recommended</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Experimental control software</td>
			<td style="width:127px;">Psychtoolbox.org</td>
			<td style="width:152px;">Psychtoolbox</td>
			<td>Free to download but requires MATLAB</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Statistical software</td>
			<td style="width:127px;">Graphpad</td>
			<td style="width:152px;">Prism V5</td>
			<td>http://www.graphpad.com/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Statistical software</td>
			<td style="width:127px;">Palamedes</td>
			<td style="width:152px;">Psychophysics guide</td>
			<td>http://www.palamedestoolbox.org</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">3D Projection documentation</td>
			<td style="width:127px;">Wikipedia</td>
			<td style="width:152px;"></td>
			<td>http://en.wikipedia.org/wiki/3D_projection</td>
		</tr>
	</tbody>
</table>

measuring sensitivity to viewpoint change with and without stereoscopic cues

The speed and accuracy of object recognition is compromised by a change in viewpoint; demonstrating that human observers are sensitive to this transformation. Here we discuss a novel method for simulating the appearance of an object that has undergone a rotation-in-depth, and include an exposition of the differences between perspective and orthographic projections. Next we describe a method by which human sensitivity to rotation-in-depth can be measured. Finally we discuss an apparatus for creating a vivid percept of a 3-dimensional rotation-in-depth; the Wheatstone Eight Mirror Stereoscope. By doing so, we reveal a means by which to evaluate the role of stereoscopic cues in the discrimination of viewpoint rotated shapes and objects.

Figure 4 plots example results obtained from such an experiment. The y-axis in each figure describes the proportion of times that the test pattern was chosen as having a greater RID. Rather than plotting the absolute number of times this occurred, this is given as a proportion. The x-axis describes the physical RID of the test pattern; remembering that here, the reference pattern was held at a constant 45&#176; RID. The data points represent the proportion of times that the observer chose the test curve ...

Watch this Scientific Journal Video about Measuring Sensitivity to Viewpoint Change with and without Stereoscopic Cues at JoVE.com

Measuring Sensitivity to Viewpoint Change with and without Stereoscopic Cues

We discuss a novel method forviewpoint-rotation of visual stimuli, and demonstrate using a mirror stereoscopethe three-dimensional percept of rotation-in-depth. The technique can be used to investigate the role of stereoscopic cues in encoding viewpoint-rotated figures.

The speed and accuracy of object recognition is compromised by a change in viewpoint; demonstrating that human observers are sensitive to this ...

measuring-sensitivity-to-viewpoint-change-with-without-stereoscopic

Research

JoVE Journal

Behavior

4.4K 次观看.  Australian National University. We discuss a novel method forviewpoint-rotation of visual stimuli, and demonstrate using a mirror stereoscopethe three-dimensional percept of rotation-in-depth. The technique can be used to investigate the role of stereoscopic cues in encoding viewpoint-rotated figures.

视频: Measuring Sensitivity to Viewpoint Change with and without Stereoscopic Cues

A Method for Investigating Age-related Differences in the Functional Connectivity of Cognitive Control Networks Associated with Dimensional Change Card Sort Performance

The ability to adjust behavior to sudden changes in the environment develops gradually in childhood and adolescence. For example, in the Dimensional Change Card Sort task, participants switch from sorting cards one way, such as shape, to sorting them a different way, such as color. Adjusting behavior in this way exacts a small performance cost, or switch cost, such that responses are typically slower and more error-prone on switch trials in which the sorting rule changes as compared to repeat trials in which the sorting rule remains the same. The ability to flexibly adjust behavior is often said to develop gradually, in part because behavioral costs such as switch costs typically decrease with increasing age. Why aspects of higher-order cognition, such as behavioral flexibility, develop so gradually remains an open question. One hypothesis is that these changes occur in association with functional changes in broad-scale cognitive control networks. On this view, complex mental operations, such as switching, involve rapid interactions between several distributed brain regions, including those that update and maintain task rules, re-orient attention, and select behaviors. With development, functional connections between these regions strengthen, leading to faster and more efficient switching operations. The current video describes a method of testing this hypothesis through the collection and multivariate analysis of fMRI data from participants of different ages.

This video presents a method of examining age-related changes in functional connectivity of cognitive control networks engaged by targeted tasks/processes. The technique is based on multi-variate analysis of fMRI data.

针对调查中的认知控制网络与关联维度变化卡片分类性能的功能连通性年龄相关性差异的方法

The ability to adjust behavior to sudden changes in the environment develops gradually in childhood and adolescence. For example, in the Dimensional ...

科研

行为学

Uncovering Beat Deafness: Detecting Rhythm Disorders with Synchronized Finger Tapping and Perceptual Timing Tasks

A set of behavioral tasks for assessing perceptual and sensorimotor timing abilities in the general population (i.e., non-musicians) is presented here with the goal of uncovering rhythm disorders, such as beat deafness. Beat deafness is characterized by poor performance in perceiving durations in auditory rhythmic patterns or poor synchronization of movement with auditory rhythms (e.g., with musical beats). These tasks include the synchronization of finger tapping to the beat of simple and complex auditory stimuli and the detection of rhythmic irregularities (anisochrony detection task) embedded in the same stimuli. These tests, which are easy to administer, include an assessment of both perceptual and sensorimotor timing abilities under different conditions (e.g., beat rates and types of auditory material) and are based on the same auditory stimuli, ranging from a simple metronome to a complex musical excerpt. The analysis of synchronized tapping data is performed with circular statistics, which provide reliable measures of synchronization accuracy (e.g., the difference between the timing of the taps and the timing of the pacing stimuli) and consistency. Circular statistics on tapping data are particularly well-suited for detecting individual differences in the general population. Synchronized tapping and anisochrony detection are sensitive measures for identifying profiles of rhythm disorders and have been used with success to uncover cases of poor synchronization with spared perceptual timing. This systematic assessment of perceptual and sensorimotor timing can be extended to populations of patients with brain damage, neurodegenerative diseases (e.g., Parkinson&#8217;s disease), and developmental disorders (e.g., Attention Deficit Hyperactivity Disorder).

Behavioral tasks that allow for the assessment of perceptual and sensorimotor timing abilities in the general population (i.e., non-musicians) are presented. Synchronization of finger tapping to the beat of an auditory stimuli and detecting rhythmic irregularities provides a means of uncovering rhythm disorders.

揭开节拍耳聋：检测节律紊乱与同步手指敲击和感知定时任务

A set of behavioral tasks for assessing perceptual and sensorimotor timing abilities in the general population (i.e., non-musicians) is presented here ...

Assessment of Murine Exercise Endurance Without the Use of a Shock Grid: An Alternative to Forced Exercise

Using laboratory mouse models, the molecular pathways responsible for the metabolic benefits of endurance exercise are beginning to be defined. The most common method for assessing exercise endurance in mice utilizes forced running on a motorized treadmill equipped with a shock grid. Animals who quit running are pushed by the moving treadmill belt onto a grid that delivers an electric foot shock; to escape the negative stimulus, the mice return to running on the belt. However, avoidance behavior and psychological stress due to use of a shock apparatus can interfere with quantitation of running endurance, as well as confound measurements of postexercise serum hormone and cytokine levels. Here, we demonstrate and validate a refined method to measure running endurance in na&#239;ve C57BL/6 laboratory mice on a motorized treadmill without utilizing a shock grid. When mice are preacclimated to the treadmill, they run voluntarily with gait speeds specific to each mouse. Use of the shock grid is replaced by gentle encouragement by a human operator using a tongue depressor, coupled with sensitivity to the voluntary willingness to run on the part of the mouse. Clear endpoints for quantifying running time-to-exhaustion for each mouse are defined and reflected in behavioral signs of exhaustion such as splayed posture and labored breathing. This method is a humane refinement which also decreases the confounding effects of stress on experimental parameters.

A method to assess exercise endurance in laboratory mice without the use of a shock grid is demonstrated. This method is a humane refinement that can decrease the confounding effects of stress on experimental parameters.

小鼠运动耐力的评估没有一个冲击电网的使用：另一种强迫运动

Using laboratory mouse models, the molecular pathways responsible for the metabolic benefits of endurance exercise are beginning to be defined. The most ...

A Treatment Package without Escape Extinction to Address Food Selectivity

Feeding difficulties and feeding disorders are a commonly occurring problem for young children, particularly children with developmental delays including autism. Behavior analytic interventions for the treatment of feeding difficulties oftentimes include escape extinction as a primary component of treatment. The use of escape extinction, while effective, may be problematic as it is also associated with the emergence of challenging behavior (e.g., extinction burst). Such challenging behavior may be an acceptable side effect in treatment cases where feeding problems are severe and chronic (e.g., failure to thrive). However, in more acute cases (e.g., selective eating), the negative side effect may be unwarranted and undesired. More recent research on the behavioral treatment of food selectivity has begun to evaluate treatments for feeding difficulties that do not include escape extinction (e.g., demand fading, behavioral momentum), with some success. However, research to date reveals individual differences in responsiveness to such treatments and no clear preferable treatment has emerged. This manuscript describes a multi-component treatment package that includes shaping, sequential presentation and simultaneous presentation, for the treatment of food selectivity in four young children with developmental delays. This treatment package extends the literature on the behavioral treatment for food selectivity and offers a multi-component treatment protocol that may be clinically applicable across a range of treatment scenarios and settings.

Feeding difficulties are a common problem for children with developmental disorders, including autism, and behavioral interventions often include escape extinction. Recent research has begun to evaluate treatments that do not include escape extinction. This manuscript describes a multicomponent treatment package that does not use escape extinction to treat feeding difficulties.

一个疗程装没有逃脱灭绝解决粮食选择性

Feeding difficulties and feeding disorders are a commonly occurring problem for young children, particularly children with developmental delays including ...

The 4 Mountains Test: A Short Test of Spatial Memory with High Sensitivity for the Diagnosis of Pre-dementia Alzheimer's Disease

This protocol describes the administration of the 4 Mountains Test (4MT), a short test of spatial memory, in which memory for the topographical layout of four mountains within a computer-generated landscape is tested using a delayed match-to-sample paradigm. Allocentric spatial memory is assessed by altering the viewpoint, colors and textures between the initially presented and target images.
Allocentric spatial memory is a key function of the hippocampus, one of the earliest brain regions to be affected in Alzheimer&#39;s disease (AD) and impairment of hippocampal function predates the onset of dementia. It was hypothesized that performance on the 4MT would aid the diagnosis of predementia AD, which manifests clinically as Mild Cognitive Impairment (MCI).
The 4MT was applied to patients with MCI, stratified further based on cerebrospinal fluid (CSF) AD biomarker status (10 MCI biomarker positive, 9 MCI biomarker negative), and with mild AD dementia, as well as healthy controls. Comparator tests included tests of episodic memory and attention widely accepted as sensitive measures of early AD. Behavioral data were correlated with quantitative MRI measures of the hippocampus, precuneus and posterior cingulate gyrus.
4MT scores were significantly different between the two MCI groups (p = 0.001), with a test score of &#8804;8/15 associated with 100% sensitivity and 78% specificity for the classification of MCI with positive AD biomarkers, i.e., predementia AD. 4MT test scores correlated with hippocampal volume (r = 0.42) and cortical thickness of the precuneus (r = 0.55).
In conclusion, the 4MT is effective in identifying the early stages of AD. The short duration, easy application and scoring, and favorable psychometric properties of the 4MT fulfil the need for a simple but accurate diagnostic test for predementia AD.

The 4 Mountains Test: A Short Test of Spatial Memory with High Sensitivity for the Diagnosis of Pre-dementia Alzheimer&#039;s Disease

This article describes the 4 Mountains Test (4MT), a hippocampus-dependent test of working allocentric spatial memory. The hippocampus is affected early in Alzheimer's disease (AD) and this article outlines the 4MT methodology and results of patient testing, which demonstrates the value of the 4MT in the diagnosis of pre-dementia AD.

四山测试：空间记忆的一个简短的测试与高灵敏度的预痴呆诊断阿尔茨海默氏病

This protocol describes the administration of the 4 Mountains Test (4MT), a short test of spatial memory, in which memory for the topographical layout of ...

A Method to Test the Effect of Environmental Cues on Mating Behavior in Drosophila melanogaster

An individual's sexual drive is influenced by genotype, experience and environmental conditions. How these factors interact to modulate sexual behaviors remains poorly understood. In Drosophila melanogaster, environmental cues, such as food availability, affect mating activity offering a tractable system to investigate the mechanisms modulating sexual behavior. In D. melanogaster, environmental cues are often sensed via the chemosensory gustatory and olfactory systems. Here, we present a method to test the effect of environmental chemical cues on mating behavior. The assay consists of a small mating arena containing food medium and a mating couple. The mating frequency for each couple is continuously monitored for 24 h. Here we present the applicability of this assay to test environmental compounds from an external source through a pressurized air system as well as manipulation of the environmental components directly in the mating arena. The use of a pressurized air system is especially useful to test the effect of very volatile compounds, while manipulating components directly in the mating arena can be of value to ascertain a compound's presence. This assay can be adapted to answer questions about the influence of genetic and environmental cues on mating behavior and fecundity as well as other male and female reproductive behaviors.

A Method to Test the Effect of Environmental Cues on Mating Behavior in Drosophila melanogaster

We demonstrate an assay to analyze the environmental and genetic cues that influence mating behavior in the fruit fly Drosophila melanogaster.

测试环境线索对交配行为的影响的方法<em&gt;黑腹果蝇</em

An individual's sexual drive is influenced by genotype, experience and environmental conditions. How these factors interact to modulate sexual behaviors ...

A Method for Investigating Change Blindness in Pigeons (Columba Livia)

Change blindness is a phenomenon of visual attention, whereby changes to a visual display go unnoticed under certain specific circumstances. While many laboratory procedures have been developed that produce change blindness in humans, the flicker paradigm has emerged as a particularly effective method. In the flicker paradigm, two visual displays are presented in alternation with one another. If successive displays are separated by a short inter-stimulus interval (ISI), change detection is impaired. The simplicity of the procedure and the clear, performance-based operational definition of change blindness make the flicker paradigm well-suited to comparative research using nonhuman animals. Indeed, a variant has been developed that can be implemented in operant chambers to study change blindness in pigeons. Results indicate that pigeons, like humans, are worse at detecting the location of a change if two consecutive displays are separated in time by a blank ISI. Furthermore, pigeons&#39; change detection is consistent with an active, location-by-location search process that requires selective attention. The flicker task thus has the potential to contribute to investigations of the dynamics of pigeons&#39; selective spatial attention in comparison to humans. It also illustrates that the phenomenon of change blindness is not exclusive to humans&#39; visual perception, but may instead be a general consequence of selective attention. Finally, while the useful aspects of attention are widely appreciated and understood, it is also important to acknowledge that they may be accompanied by specific imperfections such as change blindness, and that these imperfections have consequences across a wide range of contexts.

A Method for Investigating Change Blindness in Pigeons Columba Livia

Change blindness is a phenomenon of visual attention, whereby changes to a visual display go unnoticed under certain specific circumstances. This protocol describes a variation on the flicker paradigm for investigating change blindness that is appropriate and effective for research with pigeons.

一种调查鸽子变盲的方法 (科伦巴)

Change blindness is a phenomenon of visual attention, whereby changes to a visual display go unnoticed under certain specific circumstances. While many ...

Using Clicker Training and Social Observation to Teach Rats to Voluntarily Change Cages

Cage cleaning is a routinely performed husbandry procedure and is known to induce stress in laboratory rats. As stress can have a negative impact on well-being and can affect the comparability and reproducibility of research results, the amount of stress experienced by laboratory animals should be minimized and avoided when possible. Further, the direct contact between the rat and animal caretaker during the cage change bears hygiene risks and therefore possibly negatively impacts the well-being of the rats and the quality of the research. 
Our protocol aims to improve the routinely performed cage changing procedure. For this reason, we present a feasible protocol that enables rats to learn via clicker training and observation to voluntarily change to a clean cage. This training helps to reduce stress caused by the physical disturbance and handling associated with the cage changes and concurrently enables a reduction in direct contact between animal and animal caretaker after the training phase is completed.
The implementation of clicker training to rats is fast and easy. Rats are generally interested in the training and efficiently learn the desired behavior, which entails changing cages through a pipe. Even without training, the rats learn to perform the desired behavior by observation, as 80% of the observational learning group successfully changed cages when tested. The training further helps to establish a relationship of trust between trainer and animal. As hygiene and well-being are both very important in animal experiments, this protocol might also help to improve high-quality research.

This protocol introduces a method of cage change for rats via clicker training. Rats learn the desired behavior not only by direct training but also by observational learning. The implementation of this fast and easy protocol might help to improve well-being and hygiene in rodent facilities.

用小鼠训练和社会观察教老鼠主动改变笼子

Cage cleaning is a routinely performed husbandry procedure and is known to induce stress in laboratory rats. As stress can have a negative impact on ...

Modified Blood Collection from Tail Veins of Non-anesthetized Mice with a Vacuum Blood Collection System and Eyeglass Magnifier

Blood sample collection is the basis of experimental animal research. It is of importance to obtain adequate blood samples for various research purposes. The tail veins of mice are small, and it is sometimes difficult to obtain the required blood volume by conventional puncture methods. This study investigates the superiority of repeated blood sample collection from tail veins of mice through use of a vacuum blood collection system and eyeglass magnifier (experimental group) compared to conventional blood sampling methods (conventional group), performed by beginners and experts, respectively. With the help of an eyeglass magnifier, a butterfly needle tip is inserted into the tail vein of each mouse in the experimental group. When the vein is penetrated successfully, a blood sample is collected in the vacuum collection tube by insertion of the rubber end of a butterfly needle into the vacuum blood collection tube. The plunger is then used to collect blood without the help of the eyeglass magnifier in the conventional group. Success rates of blood sample collection by the beginners and experts were shown to be 70% vs. 100% (p &#60; 0.01) in the experimental group and 35% vs. 85% (p &#60; 0.01) in the conventional group. For both beginners and experts, puncture times required for obtaining required blood sample were significantly lower in the experimental group compared to the conventional group (2.40 &#177; 0.75 vs. 2.90 &#177; 0.31, p &#60; 0.05; 1.15 &#177; 0.37 vs. 1.55 &#177; 0.76, p &#60; 0.05). In conclusion, the presented blood sampling technique is feasible and easy to practice and enables frequent sampling of adequate blood volumes from non-anesthetized mice.&#160;

This study reports blood sampling from tail vein in mice using a vacuum extraction tube system with eyeglass magnifier. Our method is easy to practice and could be used for repeat blood sampling in mice.

真空采血系统和眼镜放大镜从非麻醉小鼠尾静脉中修饰采血

Blood sample collection is the basis of experimental animal research. It is of importance to obtain adequate blood samples for various research purposes. ...

Assessing the Influence of Personality on Sensitivity to Magnetic Fields in Zebrafish

To orient themselves in their environment, animals integrate a wide array of external cues, which interact with several internal factors, such as personality. Here, we describe a behavioral protocol designed for the study of the influence of zebrafish personality on their orientation response to multiple external environmental cues, specifically water currents and magnetic fields. This protocol aims to understand whether proactive or reactive zebrafish display different rheotactic thresholds (i.e., the flow speed at which the fish start swimming upstream) when the surrounding magnetic field changes its direction. To identify zebrafish with the same personality, fish are introduced in the dark half of a tank connected with a narrow opening to a bright half. Only proactive fish explore the novel, bright environment. Reactive fish do not exit the dark half of the tank. A swimming tunnel with low flow rates is used to determine the rheotactic threshold. We describe two setups to control the magnetic field in the tunnel, in the range of the earth&#8217;s magnetic field intensity: one that controls the magnetic field along the flow direction (one dimension) and one that allows a three-axial control of the magnetic field. Fish are filmed while experiencing a stepwise increase of the flow speed in the tunnel under different magnetic fields. Data on the orientation behavior are collected through a video-tracking procedure and applied to a logistic model to allow the determination of the rheotactic threshold. We report representative results collected from shoaling zebrafish. Specifically, these demonstrate that only reactive, prudent fish show variations of the rheotactic threshold when the magnetic field varies in its direction, while proactive fish do not respond to magnetic field changes. This methodology can be applied to the study of magnetic sensitivity and rheotactic behavior of many aquatic species, both displaying solitary or shoaling swimming strategies.

We describe a behavioral protocol designed to assess how zebrafish&#8217;s personalities influence their response to water currents and weak magnetic fields. Fishes with the same personalities are separated based on their explorative behavior. Then, their rheotactic orientation behavior in a swimming tunnel with a low flow rate and under different magnetic conditions is observed.