El trabajo fue apoyado por becas de la Fundación Bill y Melinda Gates Foundation (# 38 631) y los NIH, incluyendo DP2 OD004631 y AI084119 R01.

1. Metodología <ol><li> El primer paso del protocolo es para seleccionar la secuencia de la corona V3 deseas retirarte in silico. Para la cepa R2, la secuencia de este fragmento es KSIPMGPGRAFYT. </li><li> La estructura atómica en 3D del péptido correspondiente a esta secuencia debe ser construido en el espacio virtual de la computadora. El comando de ICM para esto es: buildpep &quot;KSIPMGPGRAFYT&quot; o Archivo: Nuevo: péptidos se pueden seleccionar en el menú desplegable </li><li> Varios parámetros del procedimiento A continuación se establecen, incluyendo el número de pasos de búsqueda (la longitud de la búsqueda), la temperatura de la simulación, los parámetros de la estrategia de búsqueda incluido el control variable de sesgo de la búsqueda hacia las zonas razonable, términos de energía, selección de diferentes métodos de cálculo de la energía, y los parámetros que indican cómo la búsqueda se registrarán como si para grabar una película y el número de conformaciones intermedias de puntuación deben ser registrados. Todos estos parámetros han sido optimizados por publicaciones anteriores (ver www.molsoft.com). </li><li> El plegado se inició a continuación con el comando: montecarlo o Archivo: Nuevo: péptidos se pueden seleccionar en el menú desplegable de Mecánica Molecular: Minimizar: Global En el primer caso, los parámetros del paso 3 se debe establecer uno por uno en la línea de comandos. En este último caso, casillas de verificación de los parámetros más comúnmente elegido se proporcionan en un panel antes de que el comando es ejecutado. Para mayor comodidad, el mismo guión de plegado ICM utilizada para este experimento y los experimentos publicados anteriormente se muestra aquí: <img src="/files/ftp_upload/2118/2118output.jpg" alt="Salida" /> Este script se puede guardar en un archivo de texto y se ejecuta desde la línea de la computadora de comandos del sistema operativo (generalmente Linux) rápidamente con el comando: icm _foldingscript </li></ol> 2. Secretos para el Éxito <ol><li> El V3 es una constante 35 aminoácidos de longitud en casi todas las cepas conocidas, por lo que las posiciones de aminoácidos se numeran desde 1 hasta 35 a partir del disulfuro de origen en condiciones de servidumbre de cistina en 1 y terminando con el disulfuro de cistina en condiciones de servidumbre correspondientes a los 35. Ya que es parte de un circuito, los límites de la corona de la V3 deben ser elegidos cuidadosamente. Si es demasiado grande es un fragmento elegido, es poco probable que se comporte como un segmento libremente flexibles, como si se tratara de un péptido libre, por lo que la simulación de plegado presenta problemas para evaluar la estructura. Si es demasiado pequeño fragmento que se elija, la estructura terciaria de carácter informativo no se puede formar en la simulación. Nuestro estudio anterior mostró que el fragmento de la posición 10 a la posición 22 correlacionado con anticuerpo unido conformaciones cristalográfica, por lo que este es el fragmento de un V3 que se debe elegir para el plegado. </li><li> A pesar de los menús usando la interfaz gráfica de usuario y pull-down es fácil de usar, el trabajo previo con éxito en el plegamiento de péptidos en general con ICM y V3 loop corona plegable, en particular, utiliza el programa anterior, simplemente modificando la secuencia en la línea de buildpep y ejecución de la secuencia de comandos desde la línea de comandos, se recomienda. </li></ol> 3. Resultados representante Los resultados para el plegado R2 son representativos de los resultados de cualquier lazo V3. Para evaluar los resultados, el archivo de proyecto (que se llamará &quot;newProject1.icb&quot; de la secuencia de comandos) deben ser abiertos y &quot;Mecánica Molecular, Pila, Ver&quot; elegido. Una tabla de las conformaciones de la pila aparecerá. Las conformaciones de pila se puede visualizar gráficamente haciendo clic en el icono de la Parcela / Histograma. &quot;Mecánica Molecular, Pila, Play&quot; hará una película de la pila de apreciar visualmente las preferencias conformacionales descubierto por el plegamiento. Para la secuencia de R2, la conformación es beta-horquilla-como era de esperar, como para los bucles V3 2 - sobre todo en el fragmento en las posiciones 12 a 14, donde se ve una clara preferencia de β-cadena a través de la pila, y conformaciones helicoidales alfa-muy pocos se ven. Por otra parte, una brecha de energía de casi 3 unidades se ve entre la conformación de energía más bajo y el segundo más bajo de conformación de la energía. Desde el punto de vista energético, lo que significa que la única estructura que parpadea de la conformación de energía más bajo a menos de un uno por ciento del tiempo: los resultados de plegado por lo tanto, sugieren que el V3 R2 corona es una rígida, en lugar de estructura flexible,. Puede haber más características estructurales importantes en el conjunto de conformaciones, pero son difíciles de apreciar de manera sistemática. <table border="1"><tbody><tr><td></td><td> JRFL </td><td> SF162_V3JRFL </td><td> SF162_V3R2 </td></tr><tr><td> 447-52D GMT 50 </td><td> 15 </td><td> 0,00061 </td><td> 0,00078 </td></tr></tbody></table> Tabla 1: neutralización relativa de JRFL y V3 R2 bucles en entornos máscara o sin máscara. Los datos se informó anteriormente en Cardozo T., et al. ARHR (2008) y Pinter, A., et. al J. Virol (2004). En pocas palabras, la actividad neutralizante se determinó con un ensayo de infectividad de un solo ciclo de uso de vibradores genera con el env-defectuoso luciferasa que expresan pNL4-3.Luc.RE plásmido pseudotyped con la Env JRFL o el SF162 V3 variantes descritas anteriormente: SF162_V3JRFL contiene el JRFL V3 secuencia de bucle en lugar de la secuencia de bucle SF162 V3. SF162_V3R2 contiene la secuencia de bucle V3 R2 en lugar de la secuencia de bucle SF162 V3. El PSV se incubaron con diluciones seriadas del mAb 447-52D de 1,5 horas a 37 ° C, y luego agregó a CD4 + CCR5 + U87 células diana se sembraron en placas de 96 pocillos en presencia de polibreno (10 mg = ml). Después de 24 horas, las células fueron realimentado con medio RPMI con 10% de SFB y 10 mg = polibreno ml, seguido de un adicional de 24 a 48 h de incubación. La actividad luciferasa se determinó después de la infección 48-72 h con un luminómetro microplaca (HARTA, Inc.), utilizando reactivos de análisis de los títulos de Promega, Inc. media geométrica para el 50% de neutralización (GMT50) por 447-52D se determinarán por interpolación de las curvas de neutralización y son los promedios de al menos tres ensayos independientes.

<ol>
	<li>Almond, D., Kimura, T., Kong, X., Zolla-Pazner, S. &. a. m. p. ;. a. m. p., Cardozo, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamic+characterization+of+the+V3+loop+crown.">Dynamic characterization of the V3 loop crown.</a> Antiviral Therapy. 12, 13-31 (2007).</li><li>Almond, D., Kimura, T., Kong, X., Swetnam, J., Zolla-Pazner, S., Cardozo, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structural+conservation+predominates+over+sequence+variability+in+the+crown+of+HIV+type+1's+V3+loop.">Structural conservation predominates over sequence variability in the crown of HIV type 1's V3 loop.</a> AIDS Res Hum Retroviruses. 26, (2010).</li><li>Abagyan, R., Totrov, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biased+probability+Monte+Carlo+conformational+searches+and+electrostatic+calculations+for+peptides+and+proteins.">Biased probability Monte Carlo conformational searches and electrostatic calculations for peptides and proteins.</a> J Mol Biol. 235, 983-1002 (1994).</li><li>Quinnan, G. V., Zhang, P. F., Fu, D. W., Dong, M., Alter, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Expression+and+characterization+of+HIV+type+1+envelope+protein+associated+with+a+broadly+reactive+neutralizing+antibody+response.">Expression and characterization of HIV type 1 envelope protein associated with a broadly reactive neutralizing antibody response.</a> AIDS Res Hum Retroviruses. 15, 561-5670 (1999).</li><li>Zhang, P. F., Bouma, P., Park, E. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+variable+region+3+(V3)+mutation+determines+a+global+neutralization+phenotype+and+CD4-independent+infectivity+of+a+human+immunodeficiency+virus+type+1+envelope+associated+with+a+broadly+cross-reactive,+primary+virus-neutralizing+antibody+response.">A variable region 3 (V3) mutation determines a global neutralization phenotype and CD4-independent infectivity of a human immunodeficiency virus type 1 envelope associated with a broadly cross-reactive, primary virus-neutralizing antibody response.</a> J Virol. 76, 644-655 (2002).</li></ol>

Plegables ab initio revela terciario propiedades estructurales, cuyos efectos pueden no ser evidentes a partir del estudio de aminoácidos individuales de forma secuencial. Varias propiedades estructurales anteriormente oscuro de la V3 R2 bucle corona son reveladas por la simulación de plegado. Estas preferencias estructurales observadas se pueden correlacionar con observaron las propiedades funcionales de la cepa de R2, es decir, la sensibilidad a la neutralización y hyperinfectivity 5. <p cla...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>ICM-Pro</td>
<td>&nbsp;</td>
<td>Molsoft LLC</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

assessment of immunologically relevant dynamic tertiary structural features of the hiv-1 v3 loop crown r2 sequence by ab initio folding

La diversidad antigénica del VIH-1 ha sido durante mucho tiempo un obstáculo para el diseño de vacunas, y esta variabilidad es especialmente pronunciada en el bucle V3 de la glicoproteína del virus sobre la superficie. Nos habíamos propuesto que la corona de la V3, aunque variable dinámica y la secuencia, se ve limitada en toda la población del virus VIH-1 a un inmunológicamente relevantes β-horquilla estructura terciaria. Es importante destacar que existen miles de diferentes secuencias V3 corona bucle en la circulación de virus VIH-1, por lo que la caracterización estructural en 3D de las tendencias a través de la diversidad de los virus de difícil o imposible por la cristalografía o RMN. Nuestros estudios anteriores con éxito con el plegado de la corona V3 1, 2 utiliza el algoritmo ab initio 3 accesibles en el ICM-Pro paquete de software de modelado molecular (Molsoft LLC, La Jolla, CA) y sugirió que la corona de la V3, específicamente de las posiciones 10 a 22, los beneficios de la flexibilidad suficiente y la longitud de los tallos que flanquean a comportarse en gran medida, como si se tratara de un péptido sin restricciones libremente plegable en la solución. Como plegables, y rápido ab initio de sólo esta porción del lazo V3 de cualquier cepa individual de los 60.000 que circulan cepas VIH-1 pueden ser informativas. En este sentido, dobló el bucle V3 de la cepa de R2 para conocer mejor las bases estructurales de sus propiedades únicas. R2 tiene una secuencia de bucle V3 raro que se cree responsable de la exquisita sensibilidad de esta cepa a la neutralización por el suero de los pacientes y los anticuerpos monoclonales 4, 5. La media tensión CD4 independiente de la infección y parece inducir anticuerpos ampliamente neutralizantes. Se demuestra cómo la evaluación de los resultados de las plegables pueden ser informativas para la asociación de las estructuras observadas en el plegamiento de las actividades inmunológicas observadas para R2.

Watch this Scientific Journal Video about Assessment of Immunologically Relevant Dynamic Tertiary Structural Features of the HIV-1 V3 Loop Crown R2 Sequence by ab initio Folding at JoVE.com

Assessment of Immunologically Relevant Dynamic Tertiary Structural Features of the HIV-1 V3 Loop Crown R2 Sequence by ab initio Folding

La región de la corona de las diferentes secuencias V3 bucle de la glicoproteína de superficie (gp120) del VIH-1 puede ser caracterizado estructuralmente en muchos casos en el plegamiento in silico de las posiciones 10 a 22 del ciclo con un estado de la técnica<em&gt; Ab initio</em&gt; Plegables algoritmo. Aquí se demuestra el plegado y la evaluación de esta región del bucle V3 de la cepa R2 del VIH-1, una cepa de neutralización únicamente sensible con desconcertantes propiedades funcionales.

Evaluación de la inmunológicamente relevantes características dinámicas estructurales Terciario de la pandemia del VIH-1 secuencia de bucle V3 R2 Corona Ab initio Plegable

The antigenic diversity of HIV-1 has long been an obstacle to vaccine design, and this variability is especially pronounced in the V3 loop of the virus' ...

assessment-immunologically-relevant-dynamic-tertiary-structural

Research

JoVE Journal

Immunology and Infection

Assessment of Immunologically Relevant Dynamic Tertiary Structural Features of the HIV-1 V3 Loop Crown R2 Sequence by ab initio Folding

9.5K vistas.  School of Medicine, New York University. La región de la corona de las diferentes secuencias V3 bucle de la glicoproteína de superficie (gp120) del VIH-1 puede ser caracterizado estructuralmente en muchos casos en el plegamiento in silico de las posiciones 10 a 22 del ciclo con un estado de la técnica Ab initio Plegables algoritmo. Aquí se demuestra el plegado y la evaluación de esta región del bucle V3 de la cepa R2 del VIH-1, una cepa de neutralización únicamente sensible con desconcerta...

Video: Assessment of Immunologically Relevant Dynamic Tertiary Structural Features of the HIV-1 V3 Loop Crown R2 Sequence by ab initio Folding

Specific Marking of HIV-1 Positive Cells using a Rev-dependent Lentiviral Vector Expressing the Green Fluorescent Protein

Most of HIV-responsive expression vectors are based on the HIV promoter, the long terminal repeat (LTR). While responsive to an early HIV protein, Tat, the LTR is also responsive to cellular activation states and to the local chromatin activity where the integration has occurred. This can result in high HIV-independent activity, and has restricted the usefulness of LTR-based reporter to mark HIV positive cells 1,2,3. Here, we constructed an expression lentiviral vector that possesses, in addition to the Tat-responsive LTR, numerous HIV DNA sequences that include the Rev-response element and HIV splicing sites 4,5,6. The vector was incorporated into a lentiviral reporter virus, permitting highly specific detection of replicating HIV in living cell populations. The activity of the vector was measured by expression of the green fluorescence protein (GFP). The application of this vector as reported here offers a novel alternative approach to existing methods, such as in situ PCR or HIV antigen staining, to identify HIV-positive cells. The vector can also express therapeutic genes for basic or clinical experimentation to target HIV-positive cells.

We have developed a lentiviral vector that possesses, in addition to the Tat-responsive LTR, the Rev-response element (RRE) that can regulate reporter gene expression in an HIV-1 Tat- and Rev-dependent fashion. The vector permits the specific detection of replicating HIV in living cells via the expression of GFP.

Marcado específico del VIH-1 células positivas utilizando un vector lentiviral Ap-dependientes que expresan la proteína verde fluorescente

Most of HIV-responsive expression vectors are based on the HIV promoter, the long terminal repeat (LTR). While responsive to an early HIV protein, Tat, ...

Investigación

Inmunología e Infección

Genotypic Inference of HIV-1 Tropism Using Population-based Sequencing of V3

Background: Prior to receiving a drug from CCR5-antagonist class in HIV therapy, a patient must undergo an HIV tropism test to confirm that his or her viral population uses the CCR5 coreceptor for cellular entry, and not an alternative coreceptor. One approach to tropism testing is to examine the sequence of the V3 region of the HIV envelope, which interacts with the coreceptor.
Methods: Viral RNA is extracted from blood plasma. The V3 region is amplified in triplicate with nested reverse transcriptase-PCR. The amplifications are then sequenced and analyzed using the software, RE_Call. Sequences are then submitted to a bioinformatic algorithm such as geno2pheno to infer viral tropism from the V3 region. Sequences are inferred to be non-R5 if their geno2pheno false positive rate falls below 5.75%. If any one of the three sequences from a sample is inferred to be non-R5, the patient is unlikely to respond to a CCR5-antagonist.

HIV tropism can be inferred from the V3 region of the viral envelope. V3 is PCR amplified in triplicate using nested RT-PCR, sequenced, and interpreted using bioinformatic software. Samples with with 1 or more sequence(s) with low g2P scores are classified as non-R5 virus.

Inferencia genotípica del VIH-1 tropismo utilizando la población basada en la secuencia de V3

Background: Prior to receiving a drug from CCR5-antagonist class in HIV therapy, a patient must undergo an HIV tropism test to confirm that his or her ...

Amplifying and Quantifying HIV-1 RNA in HIV Infected Individuals with Viral Loads Below the Limit of Detection by Standard Clinical Assays

Amplifying viral genes and quantifying HIV-1 RNA in HIV-1 infected individuals with viral loads below the limit of detection by standard assays (below 50-75 copies/ml) is necessary to gain insight to viral dynamics and virus host interactions in patients who naturally control the infection and those who are on combination antiretroviral therapy (cART). 
Here we describe how to amplify viral genomes by single genome sequencing (the SGS protocol) 13, 19 and how to accurately quantify HIV-1 RNA in patients with low viral loads (the single-copy assay (SCA) protocol) 12, 20. 
The single-copy assay is a real-time PCR assay with sensitivity depending on the volume of plasma being assayed. If a single virus genome is detected in 7 ml of plasma, then the RNA copy number is reported to be 0.3 copies/ml. The assay has an internal control testing for the efficiency of RNA extraction, and controls for possible amplification from DNA or contamination. Patient samples are measured in triplicate.
The single-genome sequencing assay (SGS), now widely used and considered to be non-labor intensive 3, 7, 12, 14, 15,is a limiting dilution assay, in which endpoint diluted cDNA product is spread over a 96-well plate. According to a Poisson distribution, when less than 1/3 of the wells give product, there is an 80% chance of the PCR product being resultant of amplification from a single cDNA molecule. SGS has the advantage over cloning of not being subjected to resampling and not being biased by PCR-introduced recombination 19. However, the amplification success of SCA and SGS depend on primer design. Both assays were developed for HIV-1 subtype B, but can be adapted for other subtypes and other regions of the genome by changing primers, probes, and standards.

Quantifying levels of HIV-1 RNA in plasma and sequencing single HIV-1 genomes from individuals with viral loads below the limit of detection (50-75 copies/ml) is difficult. Here we describe how to extract and quantify plasma viral RNA using a real time PCR assay that reliably measures HIV-1 RNA down to 0.3 copies/ml and how to amplify viral genomes by single genome sequencing, from samples with very low viral loads.

Amplificación y cuantificación del ARN VIH-1 en individuos infectados por VIH con cargas virales por debajo del límite de detección por parte de Standard Ensayos Clínicos

Amplifying viral genes and quantifying HIV-1 RNA in HIV-1 infected individuals with viral loads below the limit of detection by standard assays (below ...

Structure of HIV-1 Capsid Assemblies by Cryo-electron Microscopy and Iterative Helical Real-space Reconstruction

Cryo-electron microscopy (cryo-EM), combined with image processing, is an increasingly powerful tool for structure determination of macromolecular protein complexes and assemblies. In fact, single particle electron microscopy1 and two-dimensional (2D) electron crystallography2 have become relatively routine methodologies and a large number of structures have been solved using these methods. At the same time, image processing and three-dimensional (3D) reconstruction of helical objects has rapidly developed, especially, the iterative helical real-space reconstruction (IHRSR) method3, which uses single particle analysis tools in conjunction with helical symmetry. Many biological entities function in filamentous or helical forms, including actin filaments4, microtubules5, amyloid fibers6, tobacco mosaic viruses7, and bacteria flagella8, and, because a 3D density map of a helical entity can be attained from a single projection image, compared to the many images required for 3D reconstruction of a non-helical object, with the IHRSR method, structural analysis of such flexible and disordered helical assemblies is now attainable.
In this video article, we provide detailed protocols for obtaining a 3D density map of a helical protein assembly (HIV-1 capsid9 is our example), including protocols for cryo-EM specimen preparation, low dose data collection by cryo-EM, indexing of helical diffraction patterns, and image processing and 3D reconstruction using IHRSR. Compared to other techniques, cryo-EM offers optimal specimen preservation under near native conditions. Samples are embedded in a thin layer of vitreous ice, by rapid freezing, and imaged in electron microscopes at liquid nitrogen temperature, under low dose conditions to minimize the radiation damage. Sample images are obtained under near native conditions at the expense of low signal and low contrast in the recorded micrographs. Fortunately, the process of helical reconstruction has largely been automated, with the exception of indexing the helical diffraction pattern. Here, we describe an approach to index helical structure and determine helical symmetries (helical parameters) from digitized micrographs, an essential step for 3D helical reconstruction. Briefly, we obtain an initial 3D density map by applying the IHRSR method. This initial map is then iteratively refined by introducing constraints for the alignment parameters of each segment, thus controlling their degrees of freedom. Further improvement is achieved by correcting for the contrast transfer function (CTF) of the electron microscope (amplitude and phase correction) and by optimizing the helical symmetry of the assembly.

This article describes a method to obtain a three-dimensional (3D) structure of helically assembled molecules using cryo-electron microscopy. In this protocol, we use HIV-1 capsid assemblies to illustrate the detailed 3D reconstruction procedure for achieving a density map by the iterative helical real-space reconstruction method.

Estructura del VIH-1 Asambleas cápside por crio-microscopía electrónica y reconstrucción iterativa helicoidal del espacio real

Cryo-electron microscopy (cryo-EM), combined with image processing, is an increasingly powerful tool for structure determination of macromolecular protein ...

Prediction of HIV-1 Coreceptor Usage (Tropism) by Sequence Analysis using a Genotypic Approach

Maraviroc (MVC) is the first licensed antiretroviral drug from the class of coreceptor antagonists. It binds to the host coreceptor CCR5, which is used by the majority of HIV strains in order to infect the human immune cells (Fig. 1). Other HIV isolates use a different coreceptor, the CXCR4. Which receptor is used, is determined in the virus by the Env protein (Fig. 2). Depending on the coreceptor used, the viruses are classified as R5 or X4, respectively. MVC binds to the CCR5 receptor inhibiting the entry of R5 viruses into the target cell. During the course of disease, X4 viruses may emerge and outgrow the R5 viruses. Determination of coreceptor usage (also called tropism) is therefore mandatory prior to administration of MVC, as demanded by EMA and FDA. 
The studies for MVC efficiency MOTIVATE, MERIT and 1029 have been performed with the Trofile assay from Monogram, San Francisco, U.S.A. This is a high quality assay based on sophisticated recombinant tests. The acceptance for this test for daily routine is rather low outside of the U.S.A., since the European physicians rather tend to work with decentralized expert laboratories, which also provide concomitant resistance testing. These laboratories have undergone several quality assurance evaluations, the last one being presented in 20111.
For several years now, we have performed tropism determinations based on sequence analysis from the HIV env-V3 gene region (V3)2. This region carries enough information to perform a reliable prediction. 
The genotypic determination of coreceptor usage presents advantages such as: shorter turnover time (equivalent to resistance testing), lower costs, possibility to adapt the results to the patients' needs and possibility of analysing clinical samples with very low or even undetectable viral load (VL), particularly since the number of samples analysed with VL&lt;1000 copies/&mu;l roughly increased in the last years (Fig. 3).
The main steps for tropism testing (Fig. 4) demonstrated in this video: 
1. Collection of a blood sample 
 2. Isolation of the HIV RNA from the plasma and/or HIV proviral DNA from blood mononuclear cells 
 3. Amplification of the env region 
 4. Amplification of the V3 region 
 5. Sequence reaction of the V3 amplicon 
 6. Purification of the sequencing samples 
 7. Sequencing the purified samples 
 8. Sequence editing 
 9. Sequencing data interpretation and tropism prediction

Prediction of HIV-1 Coreceptor Usage Tropism by Sequence Analysis using a Genotypic Approach

The prediction of the coreceptor usage of HIV-1 is required for the administration of a new class of antiretroviral drugs, i.e. coreceptor antagonists. It can be performed by sequence analysis of the env gene and subsequent interpretation through an internet based interpretation system (geno2pheno[coreceptor]).

Predicción del VIH-1 usos correceptor (tropismo) por análisis de secuencia utilizando un enfoque genotípica

Maraviroc (MVC) is the first licensed antiretroviral drug from the class of coreceptor antagonists. It binds to the host coreceptor CCR5, which is used by ...

In vitro Uncoating of HIV-1 Cores

The genome of the retroviruses is encased in a capsid surrounded by a lipid envelope. For lentiviruses, such as HIV-1, the conical capsid shell is composed of CA protein arranged as a lattice of hexagon. The capsid is closed by 7 pentamers at the broad end and 5 at the narrow end of the cone1, 2. Encased in this capsid shell is the viral ribonucleoprotein complex, and together they comprise the core.
Following fusion of the viral membrane with the target cell membrane, the HIV-1 is released into the cytoplasm. The capsid then disassembles releasing free CA in the soluble form3 in a process referred to as uncoating. The intracellular location and timing of HIV-1 uncoating are poorly understood. Single amino-acid substitutions in CA that alter the stability of the capsid also impair the ability of HIV-1 to infect cells4. This indicates that the stability of the capsid is critical for HIV-1 infection.
HIV-1 uncoating has been difficult to study due to lack of availability of sensitive and reliable assays for this process. Here we describe a quantitative method for studying uncoating in vitro using cores isolated from infectious HIV-1 particles. The approach involves isolation of cores by sedimentation of concentrated virions through a layer of detergent and into a linear sucrose gradient, in the cold. To quantify uncoating, the isolated cores are incubated at 37&deg;C for various timed intervals and subsequently pelleted by ultracentrifugation. The extent of uncoating is analyzed by quantifying the fraction of CA in the supernatant. This approach has been employed to analyze effects of viral mutations on HIV-1 capsid stability4, 5, 6. It should also be useful for studying the role of cellular factors in HIV-1 uncoating.

In vitro Uncoating of HIV-1 Cores

Uncoating is an essential step in the early phase of the HIV-1 life cycle and is defined as the disassembly of the capsid shell and the release of the viral ribonucleoprotein complex (vRNP). Here, we demonstrate techniques for isolating intact cores from HIV-1 virions and for quantifying their uncoating in vitro.

En uncoating in vitro del VIH-1 Cores

The genome of the retroviruses is encased in a capsid surrounded by a lipid envelope. For lentiviruses, such as HIV-1, the conical capsid shell is ...

Assessing the Innate Sensing of HIV-1 Infected CD4+ T Cells by Plasmacytoid Dendritic Cells Using an Ex vivo Co-culture System.

HIV-1 innate sensing requires direct contact of infected CD4+ T cells with plasmacytoid dendritic cells (pDCs). In order to study this process, the protocols described here use freshly isolated human peripheral blood mononuclear cells (PBMCs) or plasmacytoid dendritic cells (pDCs) to sense infections in either T cell line (MT4) or heterologous primary CD4+ T cells. In order to ensure proper sensing, it is essential that PBMC are isolated immediately after blood collection and that optimal percentage of infected T cells are used. Furthermore, multi-parametric flow cytometric staining can be used to confirm that PBMC samples contain the different cell lineages at physiological ratios. A number of controls can also be included to evaluate viability and functionality of pDCs. These include, the presence of specific surface markers, assessing cellular responses to known agonist of Toll-Like Receptors (TLR) pathways, and confirming a lack of spontaneous type-I interferon (IFN) production. In this system, freshly isolated PBMCs or pDCs are co-cultured with HIV-1 infected cells in 96 well plates for 18-22 hr. Supernatants from these co-cultures are then used to determine the levels of bioactive type-I IFNs by monitoring the activation of the ISGF3 pathway in HEK-Blue IFN-&#945;/&#946; cells. Prior and during co-culture conditions, target cells can be subjected to flow cytometric analysis to determine a number of parameters, including the percentage of infected cells, levels of specific surface markers, and differential killing of infected cells. Although, these protocols were initially developed to follow type-I IFN production, they could potentially be used to study other imuno-modulatory molecules released from pDCs and to gain further insight into the molecular mechanisms governing HIV-1 innate sensing.

Assessing the Innate Sensing of HIV-1 Infected CD4+ T Cells by Plasmacytoid Dendritic Cells Using an Ex vivo Co-culture System.

Unlike cell-free HIV-1 particles, infected CD4+ T cells are effectively sensed by plasmacytoid dendritic cells (pDCs). This manuscript describes a method where peripheral blood mononuclear cells (PBMCs) or isolated pDCs are co-cultured with HIV-1 infected T cells to evaluate innate sensing by pDCs as assessed by release of type-I IFN.

La evaluación de la innata de detección de VIH-1 CD4 infectados<sup&gt; +</sup&gt; Células T por las células dendríticas plasmocitoides Usando un<em&gt; Ex vivo</em&gt; Co-cultura del sistema.

HIV-1 innate sensing requires direct contact of infected CD4+ T cells with plasmacytoid dendritic cells (pDCs). In order to study this process, the ...

Conformational Evaluation of HIV-1 Trimeric Envelope Glycoproteins Using a Cell-based ELISA Assay

HIV-1 envelope glycoproteins (Env) mediate viral entry into target cells and are essential to the infectious cycle. Understanding how those glycoproteins are able to fuel the fusion process through their conformational changes could lead to the design of better, more effective immunogens for vaccine strategies. Here we describe a cell-based ELISA assay that allows studying the recognition of trimeric HIV-1 Env by monoclonal antibodies. Following expression of HIV-1 trimeric Env at the surface of transfected cells, conformation specific anti-Env antibodies are incubated with the cells. A horseradish peroxidase-conjugated secondary antibody and a simple chemiluminescence reaction are then used to detect bound antibodies. This system is highly flexible and can detect Env conformational changes induced by soluble CD4 or cellular proteins. It requires minimal amount of material and no highly-specialized equipment or know-how. Thus, this technique can be established for medium to high throughput screening of antigens and antibodies, such as newly-isolated antibodies.

Understanding viral surface antigens conformations is required to evaluate antibody neutralization and guide the design of effective vaccine immunogens. Here we describe a cell-based ELISA assay that allows the study of the recognition of trimeric HIV-1 Env expressed at the surface of transfected cells by specific anti-Env antibodies.

Evaluación conformacional del VIH-1 glicoproteínas de la envoltura trimérica El uso de un ELISA ensayo basado en células

HIV-1 envelope glycoproteins (Env) mediate viral entry into target cells and are essential to the infectious cycle. Understanding how those glycoproteins ...

Nucleocapsid Annealing-Mediated Electrophoresis (NAME) Assay Allows the Rapid Identification of HIV-1 Nucleocapsid Inhibitors

RNA or DNA folded in stable tridimensional folding are interesting targets in the development of antitumor or antiviral drugs. In the case of HIV-1, viral proteins involved in the regulation of the virus activity recognize several nucleic acids. The nucleocapsid protein NCp7 (NC) is a key protein regulating several processes during virus replication. NC is in fact a chaperone destabilizing the secondary structures of RNA and DNA and facilitating their annealing. The inactivation of NC is a new approach and an interesting target for anti-HIV therapy. The Nucleocapsid Annealing-Mediated Electrophoresis (NAME) assay was developed to identify molecules able to inhibit the melting and annealing of RNA and DNA folded in thermodynamically stable tridimensional conformations, such as hairpin structures of TAR and cTAR elements of HIV, by the nucleocapsid protein of HIV-1. The new assay employs either the recombinant or the synthetic protein, and oligonucleotides without the need of their previous labeling. The analysis of the results is achieved by standard polyacrylamide gel electrophoresis (PAGE) followed by conventional nucleic acid staining. The protocol reported in this work describes how to perform the NAME assay with the full-length protein or its truncated version lacking the basic N-terminal domain, both competent as nucleic acids chaperones, and how to assess the inhibition of NC chaperone activity by a threading intercalator. Moreover, NAME can be performed in two different modes, useful to obtain indications on the putative mechanism of action of the identified NC inhibitors.

Nucleocapsid Annealing-Mediated Electrophoresis NAME Assay Allows the Rapid Identification of HIV-1 Nucleocapsid Inhibitors

This protocol describes NAME, an assay that allows the rapid identification of molecules able to inhibit in vitro the chaperone activities of HIV-1 nucleocapsid protein.

El recocido mediada nucleocápside electroforesis (NOMBRE) ensayo permite la identificación rápida del VIH-1 inhibidores de la nucleocápside

RNA or DNA folded in stable tridimensional folding are interesting targets in the development of antitumor or antiviral drugs. In the case of HIV-1, viral ...

Isolation of Exosomes from the Plasma of HIV-1 Positive Individuals

Exosomes are small vesicles ranging in size from 30 nm to 100 nm that are released both constitutively and upon stimulation from a variety of cell types. They are found in a number of biological fluids and are known to carry a variety of proteins, lipids, and nucleic acid molecules. Originally thought to be little more than reservoirs for cellular debris, the roles of exosomes regulating biological processes and in diseases are increasingly appreciated.
Several methods have been described for isolating exosomes from cellular culture media and biological fluids. Due to their small size and low density, differential ultracentrifugation and/or ultrafiltration are the most commonly used techniques for exosome isolation. However, plasma of HIV-1 infected individuals contains both exosomes and HIV viral particles, which are similar in size and density. Thus, efficient separation of exosomes from HIV viral particles in human plasma has been a challenge.
To address this limitation, we developed a procedure modified from Cantin et. al., 2008 for purification of exosomes from HIV particles in human plasma. Iodixanol velocity gradients were used to separate exosomes from HIV-1 particles in the plasma of HIV-1 positive individuals. Virus particles were identified by p24 ELISA. Exosomes were identified on the basis of exosome markers acetylcholinesterase (AChE), and the CD9, CD63, and CD45 antigens. Our gradient procedure yielded exosome preparations free of virus particles. The efficient purification of exosomes from human plasma enabled us to examine the content of plasma-derived exosomes and to investigate their immune modulatory potential and other biological functions.

Techniques describing a gradient procedure to separate exosomes from human immunodeficiency virus (HIV) particles are described. This procedure was used to isolate exosomes away from HIV particles in human plasma from HIV-infected individuals. The isolated exosomes were analyzed for cytokine/chemokine content.

Aislamiento de exosomas del plasma de VIH-1 en individuos positivos

Exosomes are small vesicles ranging in size from 30 nm to 100 nm that are released both constitutively and upon stimulation from a variety of cell types. ...