Esta obra fue financiada en parte por el Consejo de Seguridad Nacional 99-2320-B-007-005-MY2 el Consejo Nacional de Ciencia de Taiwán grants- (CC) y NSC 101-2628-E-007-011-MY3 (CMC), y el General de Veteranos Hospitales y Sistema Universitario del Programa Común de Investigación de Taiwán (CC).

Un esquema general del procedimiento de operación se presenta en la Figura 1. El uso de prácticas éticas, se recogieron muestras de sangre de sujetos sanos, y se obtuvieron muestras de humor acuoso de los pacientes a través del Hospital General de Veteranos Taichung (TCVGH), Taichung, Taiwán bajo IRB aprobó protocolos ( IRB TCVGH No. CF11213-1). 1. La fabricación de dispositivos de papel <ol><li> Cortar papel de cromatografía en círculos de 5 mm de diámetro para proporcionar el mismo diseño que una placa de microtitulación de 96 pocillos. Sandwich estas piezas de papel con dos láminas de poliestireno con domicilio orificios pasantes y laminado. </li><li> Modificar los dispositivos de papel utilizando el método de conjugación química se describe en los pasos 28 de la siguiente. <ol><li> Tratar dispositivos de papel con plasma de oxígeno (100 mW, 1% de oxígeno, 30 sec) en una cámara de plasma. PRECAUCIÓN: Se debe tener especial cuidado cuando se trabaja con trimetoxisilano 3-mercaptopropil y N--γ maleimidobutiriloxi succinimidaéster (GMBS), ya que ambos son sensibles a la humedad y tóxico. Use guantes de protección y evitar la inhalación o el contacto con la piel y los ojos. Mantenga la botella stock bien cerrado y deje que se equilibre a temperatura ambiente antes de abrir para evitar la condensación de agua. Alternativamente, abra la botella stock dentro de una bolsa de guantes llena de nitrógeno o caja. Alícuota en pequeños frascos para evitar la apertura frecuente de la botella stock. </li><li> Inmediatamente incubado tratada dispositivos de papel en un (v / v) solución al 4% de 3-mercaptopropil trimetoxisilano en etanol (200 prueba) durante 30 min. </li><li> Enjuague dispositivos de papel con etanol y se incuba con GMBS / ml 0.01 mu mol en etanol durante 15 min. </li><li> Enjuague con etanol (200 prueba) e incubar dispositivos de papel con 10 mg / ml solución de avidina en tampón fosfato salino (PBS) durante 1 hora a 4 ° C. Almacenar a 4 ° C si es necesario, y utilizar un plazo de 4 semanas. </li></ol></li><li> Mojar cada zonas de ensayo de papel con 10 l de PBS que contiene 1% (w / v) de albúmina de suero bovino (BSA) Durante 3 x 10 min antes de la detección de 10 l biotinilados moléculas de captura para 3 × 10 min. Utilizar Anti-CD63 anticuerpo (20 g / ml en PBS que contenía 1% (w / v) de BSA y 0,09% (w / v) de azida de sodio) o anexina V (01:20, v / v en tampón de unión de anexina V) como moléculas de captura. </li><li> Enjuague anticuerpo o anexina V moléculas anti-CD63 no unidas utilizando 10 l correspondiente PBS que contenía 1% (w / v) BSA o anexina V vinculante soluciones tampón durante 3 x 1 min, respectivamente. </li></ol> 2. El suero y el humor acuoso Recolección y Procesamiento <ol><li> Recogida de suero. <ol><li> Recoger 10 ml de sangre periférica por punción venosa en tubos de separación de suero y de invertir suavemente el tubo de cinco veces. Ajuste el tubo en posición vertical y esperar 30 min. </li><li> Centrifugar a 1200 × g durante 15 min. Transferir el suero de la capa superior a un tubo limpio, y se centrifuga de nuevo a 3000 × g durante 30 min. </li><li> Pasar el sobrenadante a través de un fil 0,8 micraster. Mantenga la muestra a -80 ° C hasta su uso. </li></ol></li><li> Acuosa colección humor: recoger muestras del humor acuoso de pacientes diagnosticados por un oftalmólogo directamente a través de procedimientos y almacenar muestras invasiva a -80 ° C hasta su uso. </li></ol> 3. Aislamiento de vesículas extracelular <ol><li> Las muestras puntuales en cada zona de prueba de papel a una velocidad de 5 l / min. </li><li> Enjuague EVs no unidos con 10 l correspondientes PBS que contiene 1% (w / v) BSA o anexina V vinculante soluciones tampón durante 3 x 1 min para los dispositivos de papel funcionalizados con anti-CD63 de anticuerpos o moléculas de anexina V, respectivamente. Lleve a cabo los siguientes ensayos posteriores. </li></ol> 4. Downstream Ensayo Ejemplo 1: Electromicrographs de exploración <ol><li> Fijar EVs capturados en funcionalizado zona de prueba de papel utilizando 10 l 0,5 × fijador de Karnovsky durante 10 min. </li><li> Enjuague las muestras con amplia PBS durante 2 × 5 min. </li><li> Deshidratar elmuestras con etanol posterior 35% durante 10 min, etanol al 50% durante 2 x 10 min, etanol al 70% durante 2 x 10 min, etanol al 95% durante 2 x 10 min, y etanol 100% para 4 × 10 min. </li><li> Crítico seco y pulverización catódica recubrir las muestras con paladio / oro, y examinar utilizando un microscopio electrónico de barrido operado a baja tensión de aceleración de electrones (~ 5 kV). </li></ol> 5. Aguas abajo el Ejemplo de Ensayo 2: ELISA basado en Papel <ol><li> Añadir una solución de 5 l que contiene anti-CD9 anticuerpo primario a 1: 1.000 dilución en PBS a cada zona de ensayo que contiene EVs capturados. Espere 1 min. </li><li> Enjuagar las muestras con 30 ml de PBS agitó a 100 rpm durante 30 seg. </li><li> Añadir a 5 l solución que contiene peroxidasa de rábano (HRP) -vinculada anticuerpo secundario a 1: 1000 dilución en PBS y esperar 1 min. </li><li> Enjuagar las muestras con 30 ml de PBS agitó a 100 rpm durante 30 seg. </li><li> Añadir un sustrato colorimétrico 5 l que contiene 1: 1 relación de volumen de peróxido de hidrógeno unad 3,3 &#39;, 5,5&#39;-tetrametilbenzidina (TMB) y escanear con un escáner de escritorio. </li></ol> 6. Ejemplo Ensayo de Downstream 3: Aislamiento de ARN <ol><li> Sumergir las muestras en 35 l de ayuda ARN aislamiento a base de polivinilpirrolidona y 265 l de lisis / tampón de unión para la lisis de los vehículos eléctricos capturados. Vortex vigorosamente. </li><li> Añadir 30 l de homogeneizado proporcionado en el kit de aislamiento al lisado. Vortex vigorosamente y se puso en hielo durante 10 min. </li><li> Extraer el ARN usando ácido separación de fenol-cloroformo descrito en los pasos siguientes. <ol><li> Tomar 330 l de fenol-cloroformo de la capa de fondo de la botella y añadir a la homogenado / lisado. Vortex vigorosamente. </li><li> Centrifugar a 10.000 xg durante 5 min. Pasar la fase acuosa (superior) a un tubo limpio y tenga en cuenta el volumen extraído. </li></ol></li><li> Precipitar el ARN total con etanol al 100% del volumen que es 1,25 veces el volumen de la fase acuosa eliminado en el paso anterior y collect el ARN en la solución de elución precalentado a 95 ° C. </li><li> Concentrar y purificar aún más el ARN usando un kit de ARN de limpieza de acuerdo con el protocolo del fabricante. </li></ol>

<ol>
	<li>Caby, M. P., Lankar, D., Vincendeau-Scherrer, C., Raposo, G., Bonnerot, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomal-like+vesicles+are+present+in+human+blood+plasma.">Exosomal-like vesicles are present in human blood plasma.</a> Int. Immunol. 17, 879-887 (2005).</li><li>Lasser, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Human+saliva,+plasma+and+breast+milk+exosomes+contain+RNA:+uptake+by+macrophages.">Human saliva, plasma and breast milk exosomes contain RNA: uptake by macrophages.</a> J. Transl. Med. 9, 9 (2011).</li><li>Raj, D. A. A., Fiume, I., Capasso, G., Pocsfalvi, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+multiplex+quantitative+proteomics+strategy+for+protein+biomarker+studies+in+urinary+exosomes.">A multiplex quantitative proteomics strategy for protein biomarker studies in urinary exosomes.</a> Kidney Int. 81, 1263-1272 (2012).</li><li>Wiggins, R. C., Glatfelter, A., Kshirsagar, B., Brukman, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Procoagulant+activity+in+normal+human-urine+associated+with+subcellular+particles.">Procoagulant activity in normal human-urine associated with subcellular particles.</a> Kidney Int. 29, 591-597 (1986).</li><li>Admyre, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomes+with+immune+modulatory+features+are+present+in+human+breast+milk.">Exosomes with immune modulatory features are present in human breast milk.</a> J. Immunol. 179, 1969-1978 (2007).</li><li>Keller, S., Ridinger, J., Rupp, A. K., Janssen, J. W. G., Altevogt, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Body+fluid+derived+exosomes+as+a+novel+template+for+clinical+diagnostics.">Body fluid derived exosomes as a novel template for clinical diagnostics.</a> J. Transl. Med. 9, 86 (2011).</li><li>Asea, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heat+shock+protein-containing+exosomes+in+mid-trimester+amniotic+fluids.">Heat shock protein-containing exosomes in mid-trimester amniotic fluids.</a> J. Reprod. Immunol. 79, 12-17 (2008).</li><li>Bard, M. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Proteomic+analysis+of+exosomes+isolated+from+human+malignant+pleural+effusions.">Proteomic analysis of exosomes isolated from human malignant pleural effusions.</a> Am. J. Resp. Cell Mol. Biol. 31, 114-121 (2004).</li><li>Perkumas, K. M., Hoffman, E. A., McKay, B. S., Allingham, R. R., Stamer, W. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Myocilin-associated+exosomes+in+human+ocular+samples.">Myocilin-associated exosomes in human ocular samples.</a> Exp. Eye Res. 84, 209-212 (2007).</li><li>Anderson, H. C., Mulhall, D., Garimella, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Role+of+extracellular+membrane+vesicles+in+the+pathogenesis+of+various+diseases,+including+cancer,+renal+diseases,+atherosclerosis,+and+arthritis.">Role of extracellular membrane vesicles in the pathogenesis of various diseases, including cancer, renal diseases, atherosclerosis, and arthritis.</a> Lab. Invest. 90, 1549-1557 (2010).</li><li>Montecalvo, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanism+of+transfer+of+functional+microRNAs+between+mouse+dendritic+cells+via+exosomes.">Mechanism of transfer of functional microRNAs between mouse dendritic cells via exosomes.</a> Blood. 119, 756-766 (2012).</li><li>Grange, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microvesicles+released+from+human+renal+cancer+stem+cells+stimulate+angiogenesis+and+formation+of+lung+premetastatic+niche.">Microvesicles released from human renal cancer stem cells stimulate angiogenesis and formation of lung premetastatic niche.</a> Cancer Res. 71, 5346-5356 (2011).</li><li>Jaiswal, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microparticle-associated+nucleic+acids+mediate+trait+dominance+in+cancer.">Microparticle-associated nucleic acids mediate trait dominance in cancer.</a> Faseb. J. 26, 420-429 (2012).</li><li>Thery, C., Clayton, A., Amigorena, S., Raposo, G., Morgan, K. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Current protocols in cell biology. (UNIT 3.22), (2006).</li><li>Rood, I. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+three+methods+for+isolation+of+urinary+microvesicles+to+identify+biomarkers+of+nephrotic+syndrome.">Comparison of three methods for isolation of urinary microvesicles to identify biomarkers of nephrotic syndrome.</a> Kidney Int. 78, 810-816 (2010).</li><li>Taylor, D. D., Gercel-Taylor, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MicroRNA+signatures+of+tumor-derived+exosomes+as+diagnostic+biomarkers+of+ovarian+cancer.">MicroRNA signatures of tumor-derived exosomes as diagnostic biomarkers of ovarian cancer.</a> Gynecol. Oncol. 110, 13-21 (2008).</li><li>Witwer, K. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Standardization+of+sample+collection,+isolation+and+analysis+methods+in+extracellular+vesicle+research.">Standardization of sample collection, isolation and analysis methods in extracellular vesicle research.</a> J. Extracellular Vesicles. 2, 20360 (2013).</li><li>Fernandez-Llama, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tamm-Horsfall+protein+and+urinary+exosome+isolation.">Tamm-Horsfall protein and urinary exosome isolation.</a> Kidney Int. 77, 736-742 (2010).</li><li>Alvarez, M. L., Khosroheidari, M., Ravi, R. K., DiStefano, J. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+protein,+microRNA,+and+mRNA+yields+using+different+methods+of+urinary+exosome+isolation+for+the+discovery+of+kidney+disease+biomarkers.">Comparison of protein, microRNA, and mRNA yields using different methods of urinary exosome isolation for the discovery of kidney disease biomarkers.</a> Kidney Int. 82, 1024-1032 (2012).</li><li>Chen, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+isolation+and+transcriptome+analysis+of+serum+microvesicles.">Microfluidic isolation and transcriptome analysis of serum microvesicles.</a> Lab. Chip. 10, 505-511 (2010).</li><li>Davies, R. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+filtration+system+to+isolate+extracellular+vesicles+from+blood.">Microfluidic filtration system to isolate extracellular vesicles from blood.</a> Lab. Chip. 12, 5202-5210 (2012).</li><li>Chen, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Paper-based+immunoaffinity+devices+for+accessible+isolation+and+characterization+of+extracellular+vesicles.">Paper-based immunoaffinity devices for accessible isolation and characterization of extracellular vesicles.</a> Microfluid. Nanofluid. 16, 849-856 (2014).</li><li>Lamparski, H. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Production+and+characterization+of+clinical+grade+exosomes+derived+from+dendritic+cells.">Production and characterization of clinical grade exosomes derived from dendritic cells.</a> J. Immunol. Methods. 270, 211-226 (2002).</li><li>Cantin, R., Diou, J., Belanger, D., Tremblay, A. M., Gilbert, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Discrimination+between+exosomes+and+HIV-1:+Purification+of+both+vesicles+from+cell-free+supernatants.">Discrimination between exosomes and HIV-1: Purification of both vesicles from cell-free supernatants.</a> J. Immunol. Methods. 338, 21-30 (2008).</li><li>Carrilho, E., Martinez, A. W., Whitesides, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Understanding+wax+printing:+a+simple+micropatterning+process+for+paper-based+microfluidics.">Understanding wax printing: a simple micropatterning process for paper-based microfluidics.</a> Anal. Chem. 81, 7091-7095 (2009).</li><li>Dungchai, W., Chailapakul, O., Henry, C. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemical+detection+for+paper-based+microfluidics.">Electrochemical detection for paper-based microfluidics.</a> Anal. Chem. 81, 5821-5826 (2009).</li><li>Glavan, A. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Omniphobic+'R-F+paper'+produced+by+silanization+of+paper+with+fluoroalkyltrichlorosilanes.">Omniphobic 'R-F paper' produced by silanization of paper with fluoroalkyltrichlorosilanes.</a> Adv. Funct. Mater. 24, 60-70 (2014).</li><li>Usami, S., Chen, H. H., Zhao, Y. H., Chien, S., Skalak, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+construction+of+a+linear+shear-stress+flow+chamber.">Design and construction of a linear shear-stress flow chamber.</a> Ann. Biomed. Eng. 21, 77-83 (1993).</li><li>Murthy, S. K., Sin, A., Tompkins, R. G., Toner, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+flow+and+surface+conditions+on+human+lymphocyte+isolation+using+microfluidic+chambers.">Effect of flow and surface conditions on human lymphocyte isolation using microfluidic chambers.</a> Langmuir. 20, 11649-11655 (2004).</li><li>Cras, J. J., Rowe-Taitt, C. A., Nivens, D. A., Ligler, F. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+chemical+cleaning+methods+of+glass+in+preparation+for+silanization.">Comparison of chemical cleaning methods of glass in preparation for silanization.</a> Biosens. Bioelectron. 14, 683-688 (1999).</li><li>Thery, C., Zitvogel, L., Amigorena, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exosomes:+composition,+biogenesis+and+function.">Exosomes: composition, biogenesis and function.</a> Nat. Rev. Immunol. 2, 569-579 (2002).</li><li>Scanu, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stimulated+T+cells+generate+microparticles,+which+mimic+cellular+contact+activation+of+human+monocytes:+differential+regulation+of+pro-+and+anti-inflammatory+cytokine+production+by+high-density+lipoproteins.">Stimulated T cells generate microparticles, which mimic cellular contact activation of human monocytes: differential regulation of pro- and anti-inflammatory cytokine production by high-density lipoproteins.</a> J. Leukocyte Biol. 83, 921-927 (2008).</li><li>Inal, J. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microvesicles+in+health+and+disease.">Microvesicles in health and disease.</a> Arch. Immunol. Ther. Ex. 60, 107-121 (2012).</li><li>Fridley, G. E., Holstein, C. A., Oza, S. B., Yager, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+evolution+of+nitrocellulose+as+a+material+for+bioassays.">The evolution of nitrocellulose as a material for bioassays.</a> Mrs Bull. 38, 326-330 (2013).</li><li>Gyorgy, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Membrane+vesicles,+current+state-of-the-art:+emerging+role+of+extracellular+vesicles.">Membrane vesicles, current state-of-the-art: emerging role of extracellular vesicles.</a> Cell. Mol. Life Sci. 68, 2667-2688 (2011).</li><li>Missoum, K., Belgacem, M. N., Bras, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanofibrillated+cellulose+surface+modification:+a+review.">Nanofibrillated cellulose surface modification: a review.</a> Materials. 6, 1745-1766 (2013).</li><li>Kalia, S., Boufi, S., Celli, A., Kango, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanofibrillated+cellulose:+surface+modification+and+potential+applications.">Nanofibrillated cellulose: surface modification and potential applications.</a> Colloid Polym. Sci. 292, 5-31 (2014).</li></ol>

Los autores declaran que no tienen intereses financieros en competencia.

Los pasos más críticos para el éxito en el aislamiento de los subgrupos de vesículas extracelulares son: 1) una buena opción de papel; 2) la cobertura estable y alto de moléculas de captura en la superficie de las fibras de papel; 3) el manejo adecuado de las muestras; y 4) las prácticas de higiene general de laboratorio. Los materiales porosos se han utilizado en muchos ensayos baratas y equipo libre. Pueden tener el tamaño de poro sintonizable, funcionalidad versátil, de bajo cost...

Extracellular vesicles (EVs) are heterogeneous membranous particles that range in size from 40 nm to 5,000 nm and are released actively by many cell types via different biogenesis routes1-9. They contain unique and selected subsets of DNA, RNA, proteins, and surface markers from parental cells. Their involvement in a variety of cellular processes, such as intercellular communication10, immunity modulation11, angiogenesis12, metastasis12, chemoresistance13, and the development of eye diseases9, is increasingly recognized and has spurred a great interest in their utility in diagnostic, prognostic, therapeutic, and basic biology applications.
EVs can be classically categorized as exosomes, microvesicles, apoptotic bodies, oncosomes, ectosomes, microparticles, telerosomes, prostatosomes, cardiosomes, and vexosomes, etc., based on their biogenesis or cellular origin. For example, exosomes are formed in multivesicular bodies, whereas microvesicles are generated by budding directly from plasma membrane and apoptotic vesicles are from apoptotic or necrotic cells. However, the nomenclature is still under refined, partly due to a lack of thorough understanding and characterization of EVs. Several methods have been developed to purify EVs, including ultracentrifugation14, ultrafiltration15, magnetic beads16, polymeric precipitation17-19, and microfluidic techniques20-22. The most common procedure to purify EVs involves a series of centrifugations and/or filtration to remove large debris and other cellular contaminants, followed by a final high-speed ultracentrifugation, a process that is expensive, tedious, and nonspecific14,23,24. Unfortunately, technological need for rapid and reliable isolation of EVs with satisfactory purity and efficiency is not yet met. 
We have developed a paper-based immunoaffinity device that provides a simple, time- and cost-saving, yet efficient way to isolate and characterize subgroups of EVs22. Cellulose paper cut into a defined shape can be arranged and laminated using two plastic sheets with registered through-holes. In contrast to the general strategy to define the fluid boundary in paper-based devices by printing hydrophobic wax or polymers25-27, these laminated paper patterns are resistant to many organic liquids, including ethanol. Paper test zones are chemically modified to provide stable and dense coverage of capture molecules (e.g., target-specific antibodies) that have high affinity to specific surface markers on EV subgroups. Biological samples can be pipetted directly onto the paper test zones, and purified EVs are retained after rinse steps. Characterization of isolated EVs can be performed by SEM, ELISA, and transcriptomic analysis.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>Chromatography Paper</td>
			<td>GE Healthcare Life Sciences</td>
			<td>3001-861</td>
			<td>&#160;Whatman&#174; Grade 1 cellulose paper</td>
		</tr>
		<tr>
			<td>(3-Mercaptopropyl) trimethoxysilane</td>
			<td>Sigma Aldrich</td>
			<td>175617</td>
			<td>This chemical reacts with water and moisture and should be applied inside a nitrogen-filled glove bag. Avoid eye and skin contact. Do not breathe fumes or inhale vapors.</td>
		</tr>
		<tr>
			<td>Ethanol</td>
			<td>Fisher Scientific</td>
			<td>BP2818</td>
			<td>Absolute, 200 Proof, molecular biology grade</td>
		</tr>
		<tr>
			<td>Bovine serum albumin (BSA)</td>
			<td>BioShop Canada Inc.</td>
			<td>ALB001</td>
			<td>Often referred to as Cohn fraction V.</td>
		</tr>
		<tr>
			<td>N-g-maleimidobutyryloxy succinimide ester (GMBS)</td>
			<td>Pierce Biotechnology</td>
			<td>22309</td>
			<td>GMBS is an amine-to-sulfhydryl crosslinker. GMBS is moisture-sensitive.</td>
		</tr>
		<tr>
			<td>Avidin</td>
			<td>Pierce Biotechnology</td>
			<td>31000</td>
			<td>NeutrAvidin has 4 binding sites for biotin and its pI value is 6.3, which is more neutral than native avidin</td>
		</tr>
		<tr>
			<td>Biotinylated mouse anti-human anti-CD63</td>
			<td>Ancell</td>
			<td>215-030</td>
			<td>clone AHN16.1/46-4-5</td>
		</tr>
		<tr>
			<td>biotinylated annexin V</td>
			<td>BD Biosciences</td>
			<td>556418</td>
			<td>Annxin V has a high affinity for phosphotidylserine (PS)</td>
		</tr>
		<tr>
			<td>Primary anti-CD9 and secondary antibody</td>
			<td>System Biosciences</td>
			<td>EXOAB-CD9A-1</td>
			<td>The secondary antibody is horseradish peroxidise-conjugated</td>
		</tr>
		<tr>
			<td>Serum separation tubes</td>
			<td>BD Biosciences</td>
			<td>367991</td>
			<td>Clot activator and gel for serum separation</td>
		</tr>
		<tr>
			<td>Annexin V binding buffer</td>
			<td>BD Biosciences</td>
			<td>556454</td>
			<td>10X; dilute to 1X prior to use.</td>
		</tr>
		<tr>
			<td>TMB substrate reagent set</td>
			<td>BD Biosciences</td>
			<td>555214</td>
			<td>The set contains hydrogen peroxide and 3,3&#8217;,5,5&#8217;-tetramethylbenzidine (TMB)</td>
		</tr>
		<tr>
			<td>RNA isolation kit</td>
			<td>Life Technologies</td>
			<td>AM1560</td>
			<td>MirVana RNA isolation kit</td>
		</tr>
		<tr>
			<td>Polyvinylpyrrolidone-based RNA isolation aid</td>
			<td>Life Technologies</td>
			<td>AM9690</td>
			<td>Plant RNA isolation aid contains polyvinylpyrrolidone (PVP) that binds to polysaccharides.</td>
		</tr>
		<tr>
			<td>RNA cleanup kit</td>
			<td>Qiagen Inc.</td>
			<td>74004</td>
			<td>MinElute RNA cleanup kit is designed for purification of up to 45 &#956;g RNA.</td>
		</tr>
		<tr>
			<td>Plasma chamber</td>
			<td>March Instruments</td>
			<td>PX-250</td>
			<td></td>
		</tr>
		<tr>
			<td>Scanning electron microscope</td>
			<td>Hitachi Ltd.</td>
			<td>S-4300</td>
			<td></td>
		</tr>
		<tr>
			<td>Desktop scanner</td>
			<td>Hewlett-Packard Company</td>
			<td>Photosmart B110</td>
			<td>8-bit color images were captured. Cameras and smart phones may be also used.</td>
		</tr>
		<tr>
			<td>Image-record system</td>
			<td>J&#38;H Technology Co</td>
			<td>GeneSys G:BOX Chemi-XX8</td>
			<td>16-bit fluroscence images were captured. Fluroscence microscopes may be also used.</td>
		</tr>
	</tbody>
</table>

paper-based devices for isolation and characterization of extracellular vesicles

Vesículas extracelulares (EVs), partículas membranosas liberados de varios tipos de células, tienen un gran potencial para aplicaciones clínicas. Contienen ácido nucleico y proteínas de carga y se reconoce cada vez más como un medio de comunicación intercelular utilizado tanto por eucariota y células procariotas. Sin embargo, debido a su pequeño tamaño, los protocolos actuales para el aislamiento de los vehículos eléctricos son a menudo consume mucho tiempo, engorroso, y requieren grandes volúmenes de muestras y equipos caros, tales como una ultracentrífuga. Para hacer frente a estas limitaciones, hemos desarrollado una plataforma de inmunoafinidad en papel para separar subgrupos de vehículos eléctricos que es fácil, eficiente y requiere volúmenes de muestra tan bajas como 10 l. Las muestras biológicas pueden ser pipetearon directamente sobre zonas de ensayo de papel que han sido modificados químicamente con moléculas de captura que tienen alta afinidad a los marcadores específicos de la superficie EV. Immunosorben ligado a enzimas Validamos el ensayo mediante el uso de microscopía electrónica de barrido (SEM), en papelensayos t (P-ELISA), y el análisis del transcriptoma. Estos dispositivos basados ​​en papel permitirán el estudio de los vehículos eléctricos en la clínica y el marco de la investigación para ayudar a avanzar nuestra comprensión de las funciones de EV en la salud y la enfermedad.

La capacidad del dispositivo de papel para aislar subgrupos de los vehículos eléctricos se basa de manera eficiente a partir de su reconocimiento sensible y específica de los marcadores de superficie EV. La modificación estable de fibras de papel con moléculas de captura se logra mediante el uso de la química de avidina-biotina como se describe en otra parte 28-30. La eficacia de la conjugación química y la del método de fisisorción se evalúa utilizando lecturas basadas en fluorescencia. Las zonas ...

Watch this Scientific Journal Video about Paper-based Devices for Isolation and Characterization of Extracellular Vesicles at JoVE.com

Paper-based Devices for Isolation and Characterization of Extracellular Vesicles

Este protocolo detalla un método para aislar vesículas extracelulares (SVE), pequeñas partículas membranosas liberadas de las células, a partir de tan poco como 10 muestras de suero l. Este enfoque evita la necesidad de ultracentrifugación, requiere sólo unos pocos minutos de tiempo de ensayo, y permite el aislamiento de los vehículos eléctricos a partir de muestras de volúmenes limitados.

Dispositivos basados ​​en papel para aislamiento y caracterización de extracelular vesículas

Extracellular vesicles (EVs), membranous particles released from various types of cells, hold a great potential for clinical applications. They contain ...

paper-based-devices-for-isolation-characterization-extracellular

Research

JoVE Journal

Bioengineering

11.3K vistas.  National Tsing Hua University.  Este protocolo detalla un método para aislar vesículas extracelulares (SVE), pequeñas partículas membranosas liberadas de las células, a partir de tan poco como 10 muestras de suero l. Este enfoque evita la necesidad de ultracentrifugación, requiere sólo unos pocos minutos de tiempo de ensayo, y permite el aislamiento de los vehículos eléctricos a partir de muestras de volúmenes limitados. 

Video: Paper-based Devices for Isolation and Characterization of Extracellular Vesicles

Quantification and Size-profiling of Extracellular Vesicles Using Tunable Resistive Pulse Sensing

Extracellular vesicles (EVs), including &#8216;microvesicles&#8217; and &#8216;exosomes&#8217;, are highly abundant in bodily fluids. Recent years have witnessed a tremendous increase in interest in EVs. EVs have been shown to play important roles in various physiological and pathological processes, including coagulation, immune responses, and cancer. In addition, EVs have potential as therapeutic agents, for instance as drug delivery vehicles or as regenerative medicine. Because of their small size (50 to 1,000 nm) accurate quantification and size profiling of EVs is technically challenging.
This protocol describes how tunable resistive pulse sensing (tRPS) technology, using the qNano system, can be used to determine the concentration and size of EVs. The method, which relies on the detection of EVs upon their transfer through a nano sized pore, is relatively fast, suffices the use of small sample volumes and does not require the purification and concentration of EVs. Next to the regular operation protocol an alternative approach is described using samples spiked with polystyrene beads of known size and concentration. This real-time calibration technique can be used to overcome technical hurdles encountered when measuring EVs directly in biological fluids.

Extracellular vesicles play important roles in physiological and pathological processes, including coagulation, immune responses, and cancer or as potential therapeutic agents in drug delivery or regenerative medicine. This protocol presents methods for the quantification and size characterization of isolated and non-isolated extracellular vesicles in various fluids using tunable resistive pulse sensing.

Cuantificación y Tamaño-perfiles de extracelular vesículas Usando Tunable resistiva Pulso Sensing

Extracellular vesicles (EVs), including &#8216;microvesicles&#8217; and &#8216;exosomes&#8217;, are highly abundant in bodily fluids. Recent years have ...

Investigación

Bioingeniería

Fabrication of Three-dimensional Paper-based Microfluidic Devices for Immunoassays

Paper wicks fluids autonomously due to capillary action. By patterning paper with hydrophobic barriers, the transport of fluids can be controlled and directed within a layer of paper. Moreover, stacking multiple layers of patterned paper creates sophisticated three-dimensional microfluidic networks that can support the development of analytical and bioanalytical assays. Paper-based microfluidic devices are inexpensive, portable, easy to use, and require no external equipment to operate. As a result, they hold great promise as a platform for point-of-care diagnostics. In order to properly evaluate the utility and analytical performance of paper-based devices, suitable methods must be developed to ensure their manufacture is reproducible and at a scale that is appropriate for laboratory settings. In this manuscript, a method to fabricate a general device architecture that can be used for paper-based immunoassays is described. We use a form of additive manufacturing (multi-layer lamination) to prepare devices that comprise multiple layers of patterned paper and patterned adhesive. In addition to demonstrating the proper use of these three-dimensional paper-based microfluidic devices with an immunoassay for human chorionic gonadotropin (hCG), errors in the manufacturing process that may result in device failures are discussed. We expect this approach to manufacturing paper-based devices will find broad utility in the development of analytical applications designed specifically for limited-resource settings.

We detail a method to fabricate three-dimensional paper-based microfluidic devices for use in the development of immunoassays. Our approach to device assembly is a type of multilayer, additive manufacturing. We demonstrate a sandwich immunoassay to provide representative results for these types of paper-based devices.

La fabricación de dispositivos de microfluidos basados ​​en papel tridimensional para inmunoensayos

Paper wicks fluids autonomously due to capillary action. By patterning paper with hydrophobic barriers, the transport of fluids can be controlled and ...

Detection of Endotoxin in Nano-formulations Using Limulus Amoebocyte Lysate (LAL) Assays

When present in pharmaceutical products, a Gram-negative bacterial cell wall component endotoxin (often also called lipopolysaccharide) can cause inflammation, fever, hypo- or hypertension, and, in extreme cases, can lead to tissue and organ damage that may become fatal. The amounts of endotoxin in pharmaceutical products, therefore, are strictly regulated. Among the methods available for endotoxin detection and quantification, the Limulus Amoebocyte Lysate (LAL) assay is commonly used worldwide. While any pharmaceutical product can interfere with the LAL assay, nano-formulations represent a particular challenge due to their complexity. The purpose of this paper is to provide a practical guide to researchers inexperienced in estimating endotoxins in engineered nanomaterials and nanoparticle-formulated drugs. Herein, practical recommendations for performing three LAL formats including turbidity, chromogenic and gel-clot assays are discussed. These assays can be used to determine endotoxin contamination in nanotechnology-based drug products, vaccines, and adjuvants.

Detection of Endotoxin in Nano-formulations Using Limulus Amoebocyte Lysate LAL Assays

Detection of endotoxins in engineered nanomaterials represents one of the grand challenges in the field of nanomedicine. Here, we present a case study that describes the framework composed of three different LAL formats to estimate potential endotoxin contamination in nanoparticles.

Detección de endotoxinas en las formulaciones Nano mediante ensayos de Limulus Amoebocyte Lysate (LAL)

When present in pharmaceutical products, a Gram-negative bacterial cell wall component endotoxin (often also called lipopolysaccharide) can cause ...

Evaluation of the Storage Stability of Extracellular Vesicles

Extracellular vesicles (EVs) are promising targets in current research, to be used as drugs, drug-carriers, and biomarkers. For their clinical development, not only their pharmaceutical activity is important but also their production needs to be evaluated. In this context, research focuses on the isolation of EVs, their characterization, and their storage. The present manuscript aims at providing a facile procedure for the assessment of the effect of different storage conditions on EVs, without genetic manipulation or specific functional assays. This makes it possible to quickly get a first impression of the stability of EVs under a given storage condition, and EVs derived from different cell sources can be compared easily. The stability measurement is based on the physicochemical parameters of the EVs (size, particle concentration, and morphology) and the preservation of the activity of their cargo. The latter is assessed by the saponin-mediated encapsulation of the enzyme beta-glucuronidase into the EVs. Glucuronidase acts as a surrogate and allows for an easy quantification via the cleavage of a fluorescent reporter molecule. The present protocol could be a tool for researchers in the search for storage conditions that optimally retain EV properties to advance EV research toward clinical application.

Here we present a readily applicable protocol to assess the storage stability of extracellular vesicles, a group of naturally occurring nanoparticles produced by cells. The vesicles are loaded with glucuronidase as a model enzyme and stored under different conditions. After storage, their physicochemical parameters and the activity of the encapsulated enzyme are evaluated.

Evaluación de la estabilidad del almacenamiento de vesículas extracelulares

Extracellular vesicles (EVs) are promising targets in current research, to be used as drugs, drug-carriers, and biomarkers. For their clinical ...

Rapid Fabrication of Custom Microfluidic Devices for Research and Educational Applications

Microfluidic devices allow for the manipulation of fluids, particles, cells, micro-sized organs or organisms in channels ranging from the nano to submillimeter scales. A rapid increase in the use of this technology in the biological sciences has prompted a need for methods that are accessible to a wide range of research groups. Current fabrication standards, such as PDMS bonding, require expensive and time consuming lithographic and bonding techniques. A viable alternative is the use of equipment and materials that are easily affordable, require minimal expertise and allow for the rapid iteration of designs. In this work we describe a protocol for designing and producing PET-laminates (PETLs), microfluidic devices that are inexpensive, easy to fabricate, and consume significantly less time to generate than other approaches to microfluidics technology. They consist of thermally bonded film sheets, in which channels and other features are defined using a craft cutter. PETLs solve field-specific technical challenges while dramatically reducing obstacles to adoption. This approach facilitates the accessibility of microfluidics devices in both research and educational settings, providing a reliable platform for new methods of inquiry.

Here we present a protocol to design and fabricate custom microfluidic devices with minimal financial and time investment. The aim is to facilitate the adoption of microfluidic technologies in biomedical research laboratories and educational settings.

Fabricación rápida de dispositivos microfluídicos personalizados para investigación y aplicaciones educativas

Microfluidic devices allow for the manipulation of fluids, particles, cells, micro-sized organs or organisms in channels ranging from the nano to ...

Electric and Magnetic Field Devices for Stimulation of Biological Tissues

Electric fields (EFs) and magnetic fields (MFs) have been widely used by tissue engineering to improve cell dynamics such as proliferation, migration, differentiation, morphology, and molecular synthesis. However, variables such stimuli strength and stimulation times need to be considered when stimulating either cells, tissues or scaffolds. Given that EFs and MFs vary according to cellular response, it remains unclear how to build devices that generate adequate biophysical stimuli to stimulate biological samples. In fact, there is a lack of evidence regarding the calculation and distribution when biophysical stimuli are applied. This protocol is focused on the design and manufacture of devices to generate EFs and MFs and implementation of a computational methodology to predict biophysical stimuli distribution inside and outside of biological samples. The EF device was composed of two parallel stainless-steel electrodes located at the top and bottom of biological cultures. Electrodes were connected to an oscillator to generate voltages (50, 100, 150 and 200 Vp-p) at 60 kHz. The MF device was composed of a coil, which was energized with a transformer to generate a current (1 A) and voltage (6 V) at 60 Hz. A polymethyl methacrylate support was built to locate the biological cultures in the middle of the coil. The computational simulation elucidated the homogeneous distribution of EFs and MFs inside and outside of biological tissues. This computational model is a promising tool that can modify parameters such as voltages, frequencies, tissue morphologies, well plate types, electrodes and coil size to estimate the EFs and MFs to achieve a cellular response.

This protocol describes the step-by-step process to build both electrical and magnetic stimulators used to stimulate biological tissues. The protocol includes a guideline to simulate computationally electric and magnetic fields and manufacture of stimulator devices.

Dispositivos eléctricos y de campo magnético para la estimulación de tejidos biológicos

Electric fields (EFs) and magnetic fields (MFs) have been widely used by tissue engineering to improve cell dynamics such as proliferation, migration, ...

Labeling of Extracellular Vesicles for Monitoring Migration and Uptake in Cartilage Explants

Extracellular vesicles (EVs) are used in different studies to prove their potential as a cell-free treatment due to their cargo derived from their cellular source, such as platelet lysate (PL). When used as treatment, EVs are expected to enter the target cells and effect a response from these. In this research, PL-derived EVs have been studied as a cell-free treatment for osteoarthritis (OA). Thus, a method was set up to label EVs and test their uptake on cartilage explants. PL-derived EVs are labeled with the lipophilic dye PKH26, washed twice through a column, and then tested in an in vitro inflammation-driven&#160;OA model for 5 h after particle quantification by nanoparticle tracking analysis (NTA). Hourly, cartilage explants are fixed, paraffined, cut into 6 &#181;m sections to mount on slides, and observed under a confocal microscope. This allows verification of whether EVs enter the target cells (chondrocytes) during this period and analyze their direct effect.

Here, we present a protocol to label platelet lysate-derived extracellular vesicles to monitor their migration and uptake in cartilage explants used as a model for osteoarthritis.

Etiquetado de vesículas extracelulares para monitorear la migración y absorción en explantes de cartílago

Extracellular vesicles (EVs) are used in different studies to prove their potential as a cell-free treatment due to their cargo derived from their ...

Improving Reproducibility to Meet Minimal Information for Studies of Extracellular Vesicles 2018 Guidelines in Nanoparticle Tracking Analysis

Nanoparticle tracking analysis (NTA) has been one of several characterization methods used for extracellular vesicle (EV) research since 2006. Many consider that NTA instruments and their software packages can be easily utilized following minimal training and that size calibration is feasible in-house. As both NTA acquisition and software analysis constitute EV characterization, they are addressed in Minimal Information for Studies of Extracellular Vesicles 2018 (MISEV2018). In addition, they have been monitored by Transparent Reporting and Centralizing Knowledge in Extracellular Vesicle Research (EV-TRACK) to improve the robustness of EV experiments (e.g., minimize experimental variation due to uncontrolled factors).
Despite efforts to encourage the reporting of methods and controls, many published research papers fail to report critical settings needed to reproduce the original NTA observations. Few papers report the NTA characterization of negative controls or diluents, evidently assuming that commercially available products, such as phosphate-buffered saline or ultrapure distilled water, are particulate-free. Similarly, positive controls or size standards are seldom reported by researchers to verify particle sizing. The Stokes-Einstein equation incorporates sample viscosity and temperature variables to determine particle displacement. Reporting the stable laser chamber temperature during the entire sample video collection is, therefore, an essential control measure for accurate replication. The filtration of samples or diluents is also not routinely reported, and if so, the specifics of the filter (manufacturer, membrane material, pore size) and storage conditions are seldom included. The International Society for Extracellular Vesicle (ISEV)&#39;s minimal standards of acceptable experimental detail should include a well-documented NTA protocol for the characterization of EVs. The following experiment provides evidence that an NTA analysis protocol needs to be established by the individual researcher and included in the methods of publications that use NTA characterization as one of the options to fulfill MISEV2018 requirements for single vesicle characterization.

Nanoparticle tracking analysis (NTA) is a widely used method to characterize extracellular vesicles. This paper highlights NTA experimental parameters and controls plus a uniform method of analysis and characterization of samples and diluents necessary to supplement the guidelines proposed by MISEV2018 and EV-TRACK for reproducibility between laboratories.

Mejorar la reproducibilidad para cumplir con la información mínima para estudios de vesículas extracelulares 2018 Directrices en el análisis de seguimiento de nanopartículas

Nanoparticle tracking analysis (NTA) has been one of several characterization methods used for extracellular vesicle (EV) research since 2006. Many ...

Design to Implementation Study for Development and Patient Validation of Paper-Based Toehold Switch Diagnostics

Access to low-burden molecular diagnostics that can be deployed into the community for testing is increasingly important and has meaningful wider implications for the well-being of societies and economic stability. Recent years have seen several new isothermal diagnostic modalities emerge to meet the need for rapid, low-cost molecular diagnostics. We have contributed to this effort through the development and patient validation of toehold switch-based diagnostics, including diagnostics for the mosquito-borne Zika and chikungunya viruses, which provided performance comparable to gold-standard reverse transcription-quantitative polymerase chain reaction (RT-qPCR) based assays. These diagnostics are inexpensive to develop and manufacture, and they have the potential to provide diagnostic capacity to low-resource environments. Here the protocol provides all the steps necessary for the development of a switch-based assay for Zika virus detection. The article takes readers through the stepwise diagnostic development process. First, genomic sequences of Zika virus serve as inputs for the computational design of candidate switches using open-source software. Next, the assembly of the sensors for empirical screening with synthetic RNA sequences and optimization of diagnostic sensitivity is shown. Once complete, validation is performed with patient samples in parallel with RT-qPCR, and a purpose-built optical reader, PLUM. This work provides a technical roadmap to researchers for the development of low-cost toehold switch-based sensors for applications in human health, agriculture, and environmental monitoring.

Access to decentralized, low-cost, and high-capacity diagnostics that can be deployed into the community for decentralized testing is critical for combating global health crises. This manuscript describes how to build paper-based diagnostics for viral RNA sequences that can be detected with a portable optical reader.

Estudio de diseño a implementación para el desarrollo y validación de pacientes de diagnósticos de interruptores de punto de apoyo basados en papel

Access to low-burden molecular diagnostics that can be deployed into the community for testing is increasingly important and has meaningful wider ...

Evaluation of Cardiac Contractility Modulation Therapy in 2D Human Stem Cell-Derived Cardiomyocytes

Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) are currently being explored for multiple in vitro applications and have been used in regulatory submissions. Here, we extend their use to cardiac medical device safety or performance assessments. We developed a novel method to evaluate cardiac medical device contractile properties in robustly contracting 2D hiPSC-CMs monolayers plated on a flexible extracellular matrix (ECM)-based hydrogel substrate. This tool enables the quantification of the effects of cardiac electrophysiology device signals on human cardiac function (e.g., contractile properties) with standard laboratory equipment. The 2D hiPSC-CM monolayers were cultured for 2-4 days on a flexible hydrogel substrate in a 48-well format.
The hiPSC-CMs were exposed to standard cardiac contractility modulation (CCM) medical device electrical signals and compared to control (i.e., pacing only) hiPSC-CMs. The baseline contractile properties of the 2D hiPSC-CMs were quantified by video-based detection analysis based on pixel displacement. The CCM-stimulated 2D hiPSC-CMs plated on the flexible hydrogel substrate displayed significantly enhanced contractile properties relative to baseline (i.e., before CCM stimulation), including an increased peak contraction amplitude and accelerated contraction and relaxation kinetics. Furthermore, the utilization of the flexible hydrogel substrate enables the multiplexing of the video-based cardiac-excitation contraction coupling readouts (i.e., electrophysiology, calcium handling, and contraction) in healthy and diseased hiPSC-CMs. The accurate detection and quantification of the effects of cardiac electrophysiological signals on human cardiac contraction is vital for cardiac medical device development, optimization, and de-risking. This method enables the robust visualization and quantification of the contractile properties of the cardiac syncytium, which should be valuable for nonclinical cardiac medical device safety or effectiveness testing. This paper describes, in detail, the methodology to generate 2D hiPSC-CM hydrogel substrate monolayers.

Here, we demonstrate a non-invasive cardiac medical device contractility evaluation method using 2D human induced pluripotent stem cell-derived cardiomyocyte (hiPSC-CM) monolayers, plated on a flexible substrate, coupled with video-based microscopy. This tool will be useful for the in vitro evaluation of the contractile properties of cardiac electrophysiology devices.

Evaluación de la terapia de modulación de la contractilidad cardíaca en cardiomiocitos derivados de células madre humanas 2D

Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) are currently being explored for multiple in vitro applications and have been used ...

Dispositivos basados ​​en papel para aislamiento y caracterización de extracelular vesículas

Dispositivos basados en papel para aislamiento y caracterización de extracelular vesículas