May 4th, 2016
•This paper investigates the suitability of inkjet printing for the manufacturing of dye-sensitized solar cells. A binder-free TiO2 nanoparticle ink was formulated and printed onto a FTO glass substrate. The printed layer was fabricated into a cell with an active area of 0.25 cm2 and an efficiency of 3.5%.
Videos relacionados
Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light
Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells
Making Record-efficiency SnS Solar Cells by Thermal Evaporation and Atomic Layer Deposition
Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing
Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells
Electrospinning of Photocatalytic Electrodes for Dye-sensitized Solar Cells
In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells
Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics
ACERCA DE JoVE
Copyright © 2024 MyJoVE Corporation. Todos los derechos reservados