Richard Foxton

Durability of the dual-cure resin cement/ceramic bond with different curing strategies.

Long-term durability of the dual-cure resin cement/silicon oxide ceramic bond.

High-performance liquid chromatography/tandem mass spectrometry assay for the rapid high sensitivity measurement of basal acetylcholine from microdialysates.

Physiological remineralization of artificially demineralized dentin beneath glass ionomer cements with and without bacterial contamination in vivo.

Effect of light source direction and restoration thickness on tensile strength of a dual-curable resin cement to copy-milled ceramic.

Relationship between ceramic primer and ceramic surface pH on the bonding of dual-cure resin cement to ceramic.

Bonding of photo and dual-cure adhesives to root canal dentin.

Evaluation of active and arrested carious dentin using a pH-imaging microscope and an X-ray analytical microscope.

The resin-coating technique. Effect of a single-step bonding system on dentin bond strengths.

Histologic evaluation of adhesive restorations on dentin caries in rat molar teeth.

Comparison of PAC and QTH light sources on polymerization of resin composites.

Microtensile bond strength of a dual-cure resin core material to glass and quartz fibre posts.

Effects of flowable resin on bond strength and gap formation in Class I restorations.

Elemental distributions and microtensile bond strength of the adhesive interface to normal and caries-affected dentin.

Ultrastructure of the dentin-adhesive interface after acid-base challenge.

Growth-inhibitory effect of antibacterial self-etching primer on mutans streptococci obtained from arrested carious lesions.

Effect of acidic pretreatment combined with a silane coupling agent on bonding durability to silicon oxide ceramic.

Microtensile bond strength of dual-cure resin cement to root canal dentin with different curing strategies.

Surface analysis of dentinal caries in primary teeth using a pH-imaging microscope.

Effect of air-powder polishing on dentin adhesion of a self-etching primer bonding system.

Shear bond strengths of indirect resin composites to hybrid ceramic.

Regional bond strength of four self-etching primer/adhesive systems to root canal dentin.

Simplified and quantitative saliva buffer capacity test using a hand-held pH meter.

Effect of prolonged photo-irradiation time of three self-etch systems on the bonding to root canal dentine.

Effect of a fluoride-releasing one-step adhesive system on monkey pulp tissue.

Monkey pulpal response to an MMA-based resin cement as adhesive luting for indirect restorations.

Confocal laser scanning microscopic observations of secondary caries inhibition around different types of luting cements.

Micro-shear bond strength of adhesive systems to cementum.

Hardness and Young's modulus of transparent dentin associated with aging and carious disease.

Mechanical properties and bond strength of dual-cure resin composites to root canal dentin.

Regional bond strengths of a dual-cure resin core material to translucent quartz fiber post.

Coronal leakage inhibition in endodontically treated teeth using resin-coating technique.

Bonding durability of a self-etching primer system to normal and caries-affected dentin under hydrostatic pulpal pressure in vitro.

Effect of curing method and storage condition on fluoride ion release from a fluoride-releasing resin cement.

Effect of resin coating on adhesion of composite crown restoration.

Morphological and mechanical characterization of the acid-base resistant zone at the adhesive-dentin interface of intact and caries-affected dentin.

Effect of simulated pulpal pressure on all-in-one adhesive bond strengths to dentine.

Pulpal response to a newly developed MMA based resin cement for bonding tooth-colored indirect restorations.

Effect of incremental filling technique on adhesion of light-cured resin composite to cavity floor.

Influence of elasticity on gap formation in a lining technique with flowable composite.

Adhesive restoration of endodontically treated teeth--current research.

Tetrahydrobiopterin availability in Parkinson's and Alzheimer's disease; potential pathogenic mechanisms.

Microtensile bond strengths to cavity floor dentin in indirect composite restorations using resin coating.

Enamel bonding of self-etch and phosphoric acid-etch orthodontic adhesive systems.

Microtensile bond strength between crown and root dentin and two adhesive systems.

Denture loss: an 8-month study in a community dental setting.

Micro-tensile and micro-shear bond strengths of current self-etch adhesives to enamel and dentin.

In vitro and in vivo characterization of the non-peptide NK3 receptor antagonist SB-223412 (talnetant): potential therapeutic utility in the treatment of schizophrenia.

Effect of resin coating on dentin bonding of resin cement in Class II cavities.

Enhancement of adhesion between resin coating materials and resin cements.

Bonding durability of HEMA-free and HEMA-containing one-step adhesives to dentine surrounded by bonded enamel.

Effect of light irradiation time on the mechanical properties of two flowable composites with different initiation systems in bonded and unbonded cavities.

Effect of surface characteristics on adherence of S. mutans biofilms to indirect resin composites.

Bond strength and ultimate tensile strength of resin composite filled into dentine cavity; effect of bulk and incremental filling technique.

Dentin bond strengths of three adhesive/composite core systems using different curing units.

Adhesive restoration of endodontically treated teeth--current research.

Microtensile bond strengths of composite cores to pulpal floor dentin with resin coating.

Effect of pulse duration of Er: YAG laser on dentin ablation.

Inhibition of biofilm formation using newly developed coating materials with self-cleaning properties.

Regional bond strengths and failure analysis of fiber posts bonded to root canal dentin.

Long-term durability of one-step adhesive-composite systems to enamel and dentin.

Influence of abrasive particle size on surface properties of flowable composites.

Microtensile bond strength of etch-and-rinse and self-etching adhesives to intrapulpal dentin after endodontic irrigation and setting of root canal sealer.

Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments.

Effect of hybridization on bond strength and adhesive interface after acid-base challenge using 4-META/MMA-TBB resin.

Bond strength of resin cements to a zirconia ceramic with different surface treatments.

Y-TZP ceramics: key concepts for clinical application.

Assessment of the nanostructure of acid-base resistant zone by the application of all-in-one adhesive systems: Super dentin formation.

Improving the effect of NaOCl pretreatment on bonding to caries-affected dentin using self-etch adhesives.

Effect of resin coating on adhesion and microleakage of computer-aided design/computer-aided manufacturing fabricated all-ceramic crowns after occlusal loading: a laboratory study.

Effect of an internal coating technique on tensile bond strengths of resin cements to zirconia ceramics.

Evaluation of dentin bonding performance and acid-base resistance of the interface of two-step self-etching adhesive systems.

Relationship between fluorescence loss of QLF and depth of demineralization in an enamel erosion model.

Influence of bonded enamel margins on dentin bonding stability of one-step self-etching adhesives.

Effect of dentin pretreatment with mild acidic HOCl solution on microtensile bond strength and surface pH.

The acid-base resistant zone in three dentin bonding systems.

Effect of primer treatment on bonding of resin cements to zirconia ceramic.

Microtensile bond strengths of a dual-cure resin cement to dentin resin-coated with an all-in-one adhesive system using two curing modes.

Flexural strength of glass fibre-reinforced posts bonded to dual-cure composite resin cements.

Translucency, opalescence and light transmission characteristics of light-cured resin composites.

Influence of filling technique and curing mode on the bond strengths of composite cores to pulpal floor dentin.

Dentin bond durability and water sorption/solubility of one-step self-etch adhesives.

Thin resin coating by dual-application of all-in-one adhesives improves dentin bond strength of resin cements for indirect restorations.

Effect of reducing agents on bond strength to NaOCl-treated dentin.

Effect of composite post placement on bonding to root canal dentin using 1-step self-etch dual-cure adhesive with chemical activation mode.

Effect of resin coating and occlusal loading on microleakage of Class II computer-aided design/computer-aided manufacturing fabricated ceramic restorations: a confocal microscopic study.

Effect of pretreatment with mildly acidic hypochlorous acid on adhesion to caries-affected dentin using a self-etch adhesive.

Durability of resin cement bond to aluminium oxide and zirconia ceramics after air abrasion and laser treatment.

Effect of bonded area and/or fiber post placement on the fracture strengths of resin-core reconstructions for pulpless teeth.

Long-term evaluation of water sorption and ultimate tensile strength of HEMA-containing/-free one-step self-etch adhesives.

The influence of light intensities irradiated directly and indirectly through resin composite to self-etch adhesives on dentin bonding.

Effect of smear layer characteristics on dentin bonding durability of HEMA-free and HEMA-containing one-step self-etch adhesives.

Influences of composite-composite join on light transmission characteristics of layered resin composites.

Influence of etching ability of one-step self-etch adhesives on bonding to sound and non-carious cervical sclerotic dentin.

Scrubbing effect of self-etching adhesives on bond strength to NaOCl-treated dentin.

Color shifting at the border of resin composite restorations in human tooth cavity.

Synthesis and preliminary evaluation of a polyolefin-based core for carrier-based root canal obturation.

Bioactive effects of a calcium/sodium phosphosilicate on the resin-dentine interface: a microtensile bond strength, scanning electron microscopy, and confocal microscopy study.

Effect of air-drying dentin surfaces on dentin bond strength of a solvent-free one-step adhesive.

Light transmission characteristics of dentine and resin composites with different thickness.

Effect of waiting interval on chemical activation mode of dual-cure one-step self-etching adhesives on bonding to root canal dentin.

Effect of loading on the microtensile bond strength and microleakage of a self-etching and etch-and-rinse adhesive in direct Class II MOD composite restorations in vitro.

Effect of smear layer treatment on dentin bond of self-adhesive cements.

VEGF-A is necessary and sufficient for retinal neuroprotection in models of experimental glaucoma.

Combined effect of smear layer characteristics and hydrostatic pulpal pressure on dentine bond strength of HEMA-free and HEMA-containing adhesives.

Polymerization behavior within adhesive layer of one- and two-step self-etch adhesives: a micro-Raman spectroscopic study.

Effect of smear layer deproteinizing on resin-dentine interface with self-etch adhesive.

The physical characteristics of resin composite-calcium silicate interface as part of a layered/laminate adhesive restoration.

Spontaneous CNV in a novel mutant mouse is associated with early VEGF-A-driven angiogenesis and late-stage focal edema, neural cell loss, and dysfunction.

An in vitro assessment of gutta-percha coating of new carrier-based root canal fillings.

Effect of agitation and storage temperature on water sorption and solubility of adhesive systems.