3d scanner set up and specimen handling for scanning and virtual mapping of cancer resections

Imagerie CAO avancée pour l’analyse chirurgicale des marges dans le traitement du cancer

The goal of oncologic resection is the complete removal of cancer with surgical margins microscopically clear of tumor cells. In head and neck cancer, the surgical margin status is the most important pathologic risk factor1. A positive surgical margin increases the risk of 5-year local recurrence and all-cause mortality by &#62;90%2. Despite advances in medical technology and surgical techniques in recent years, positive margin rates in head and neck cancer remain high3. For locally advanced oral cavity cancers, the positive margin rate within the United States is 18.1%4.
For head and neck surgeons to ensure complete oncologic resection while minimizing disruption of surrounding structures, intraoperative sampling of margins via frozen section analysis (FSA) is performed. FSA provides a rapid intraoperative pathology consultation that is widely used and is the standard of care5,6,7,8,9. Fresh tissue is frozen, thinly sliced, placed on a glass slide, and stained for immediate interpretation while the patient is still under anesthesia.
Head and neck oncologic specimens present several distinct challenges in accurately assessing margin status, including the anatomic complexity of head and neck cancer specimens, the minimal reserve in the head and neck region for wide excision given the proximity to vital structures such as the eyes, face, and important nerves and vasculature, and the multiple tissue types often present in the resected specimen (i.e., mucosa, cartilage, muscle, bone)10,11. Thus, a specimen-based approach to margin analysis requires an enhanced level of communication between surgeon and pathologist12. A face-to-face conversation is often warranted to ensure correct specimen orientation and discussion of concerning margins. However, this is not always safe or feasible as it requires either the surgeon to leave the operating room (OR) while the patient remains under general anesthesia or the pathologist to leave the gross pathology lab, interrupting their workflow. In addition, there may be a significant travel time between the OR and the pathology lab, or in some cases, the pathology lab may be off-site altogether.
Following FSA, the oncologic specimen is fixed in formalin and formally processed through inking, sectioning, and margin sampling. Slides are created and microscopically interpreted by the pathologist to create a final pathology report. For complex head and neck cancer resection, this can often take 1-2 weeks. Unfortunately, processing of the specimen commonly results in the destruction of the resected cancer specimen. This may create further confusion as the final pathology report, multidisciplinary tumor board discussions, adjuvant radiation therapy planning, and re-resection in the setting of positive margins, must all proceed without a visual record of the oncologic specimen and its pathologic processing.
To address this clinical unmet need, we have developed a 3D scanning and specimen mapping protocol to enhance communication between surgeons, pathologists, and other members of the multidisciplinary cancer care team.

Pleins feux sur l’auteur : La numérisation 3D et la réalité augmentée pour améliorer la communication en chirurgie du cancer

Communication améliorée des marges tumorales grâce à la numérisation et à la cartographie 3D

Configuration du scanner 3D et manipulation des échantillons pour la numérisation et la cartographie virtuelle des résections cancéreuses

Pour commencer, installez le trépied de caméra à trois pieds sur le poste de travail plat. Placez délicatement la caméra de numérisation 3D dans le trépied et inclinez la caméra vers le poste de travail à un angle de 60 degrés. Connectez le cordon d’alimentation en deux parties à une source d’alimentation externe et à l’arrière de la caméra.Placez le plateau tournant du scanner à un pied devant la caméra 3D et la configuration du trépied. À l’aide du câble micro USB, connectez la platine à l’appareil photo. Ensuite, connectez l’appareil photo à l’ordinateur portable avec un câble USB.Ensuite, obtenez l’échantillon oncologique réséqué auprès de l’équipe chirurgicale. Rincez l’échantillon à l’eau pour éliminer tout sang ou caillot en excès de résection et séchez-le doucement. Placez l’échantillon sur une surface plane et propre.À l’aide d’un appareil photo de smartphone ou d’un appareil photo numérique, obtenez des images 2D de haute qualité de la surface antérieure de l’échantillon. Retournez l’échantillon à 180 degrés exactement et prenez une deuxième photo de la surface postérieure.

3d-scanner-set-up-specimen-handling-for-scanning-virtual-mapping

Research

JoVE Journal

Medicine

3D Scanner Set Up and Specimen Handling for Scanning and Virtual Mapping of Cancer Resections

59 vues. Pour commencer, installez le trépied de caméra à trois pieds sur le poste de travail plat. Placez délicatement la caméra de numérisation 3D dans le trépied et inclinez la caméra vers le poste de travail à un angle de 60 degrés. Connectez le cordon d’alimentation en deux parties à une source d’alimentation externe et à l’arrière de la caméra.Placez le plateau tournant du scanner à un pied devant la caméra 3D et la configuration du trépied. À l’aide du câble mi...

Vidéo: Configuration du scanner 3D et manipulation des échantillons pour la numérisation et la cartographie virtuelle des résections cancéreuses

Enhanced Communication of Tumor Margins Using 3D Scanning and Mapping

After oncologic resection of malignant tumors, specimens are sent to pathology for processing to determine the surgical margin status. These results are communicated in the form of a written pathology report. The current standard-of-care pathology report provides a written description of the specimen and the sites of margin sampling without any visual representation of the resected tissue. The specimen itself is typically destroyed during sectioning and analysis. This often leads to challenging communication between pathologists and surgeons when the final pathology report is confirmed. Furthermore, surgeons and pathologists are the only members of the multidisciplinary cancer care team to visualize the resected cancer specimen. We have developed a 3D scanning and specimen mapping protocol to address this unmet need. Computer-aided design (CAD) software is used to annotate the virtual specimen clearly showing sites of inking and margin sampling. This map can be utilized by various members of the multidisciplinary cancer care team.

A novel method for 3D scanning and virtual mapping of cancer resections is proposed with the goal of improving communication among the multidisciplinary cancer care team.

After oncologic resection of malignant tumors, specimens are sent to pathology for processing to determine the surgical margin status. These results are ...