עבודה זו נתמכה על ידי JSPS KAKENHI, מענק מספרים JP16K17988 ו JP16K05996, ועל ידי תוכנית לקידום חדשנות חוצה אסטרטגית חוצה, יחידה D66, מדידה חדשנית וניתוח של חומרים מבניים (SIP-IMASM), המופעל על ידי משרד הקבינט. המחברים מודים גם לד&quot;ר. סטושי קישימוטו וקימיושי נייטו ב NIMS עבור חומר CFRP שלהם.

<ol>
	<li>Weller, R., Shepard, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Displacement+measurement+by+mechanical+interferometry.">Displacement measurement by mechanical interferometry.</a> Proc. Soc. Exp. Stress Anal. 6 (1), 35-38 (1948).</li><li>Kishimoto, S., Egashira, M., Shinya, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microcreep+deformation+measurements+by+a+moir&#233;+method+using+electron+beam+lithography+and+electron+beam+scan.">Microcreep deformation measurements by a moir&#233; method using electron beam lithography and electron beam scan.</a> Opt. Eng. 32 (3), 522-526 (1993).</li><li>Ifju, P., Han, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+applications+of+moir&#233;+interferometry.">Recent applications of moir&#233; interferometry.</a> Exp. Mech. 50 (8), 1129-1147 (2010).</li><li>Zhang, H., Wu, C., Liu, Z., Xie, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+curved+surface+micro-moir&#233;+method+and+its+application+in+evaluating+curved+surface+residual+stress.">A curved surface micro-moir&#233; method and its application in evaluating curved surface residual stress.</a> Meas. Sci. Technol. 25 (9), 095002 (2014).</li><li>Zhang, H., Liu, Z., Wen, H., Xie, H., Liu, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Subset+geometric+phase+analysis+method+for+deformation+evaluation+of+HRTEM+images.">Subset geometric phase analysis method for deformation evaluation of HRTEM images.</a> Ultramicroscopy. 171, 34-42 (2016).</li><li>Wang, Q., Kishimoto, S., Xie, H., Liu, Z., Lou, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+situ+high+temperature+creep+deformation+of+micro-structure+with+metal+film+wire+on+flexible+membrane+using+geometric+phase+analysis.">In situ high temperature creep deformation of micro-structure with metal film wire on flexible membrane using geometric phase analysis.</a> Microelectron. Reliab. 53 (4), 652-657 (2013).</li><li>Wang, Q., Kishimoto, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+analysis+of+residual+stress+and+stress+intensity+factor+in+a+resist+after+UV-nanoimprint+lithography+based+on+electron+moir&#233;+fringes.">Simultaneous analysis of residual stress and stress intensity factor in a resist after UV-nanoimprint lithography based on electron moir&#233; fringes.</a> J. Micromech. Microeng. 22 (10), 105021 (2012).</li><li>Kishimoto, S., Wang, Q., Xie, H., Zhao, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Study+of+the+surface+structure+of+butterfly+wings+using+the+scanning+electron+microscopic+moir&#233;+method.">Study of the surface structure of butterfly wings using the scanning electron microscopic moir&#233; method.</a> Appl. Opt. 46 (28), 7026-7034 (2007).</li><li>Li, C., Liu, Z., Xie, H., Wu, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Novel+3D+SEM+Moir&#233;+method+for+micro+height+measurement.">Novel 3D SEM Moir&#233; method for micro height measurement.</a> Opt. Express. 21 (13), 15734-15746 (2013).</li><li>Xie, H., Wang, Q., Kishimoto, S., Dai, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+planar+periodic+structure+using+inverse+laser+scanning+confocal+microscopy+moir&#233;+method+and+its+application+in+the+structure+of+butterfly+wing.">Characterization of planar periodic structure using inverse laser scanning confocal microscopy moir&#233; method and its application in the structure of butterfly wing.</a> J. Appl. Phys. 101 (10), 103511 (2007).</li><li>Tang, M., Xie, H., Wang, Q., Zhu, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phase-shifting+laser+scanning+confocal+microscopy+moir&#233;+method+and+its+applications.">Phase-shifting laser scanning confocal microscopy moir&#233; method and its applications.</a> Meas. Sci. Technol. 21 (5), 055110 (2010).</li><li>Xie, H., Kishimoto, S., Asundi, A., Boay, C. G., Shinya, N., Yu, J., Ngoi, B. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In-plane+deformation+measurement+using+the+atomic+force+microscope+moir&#233;+method.">In-plane deformation measurement using the atomic force microscope moir&#233; method.</a> Nanotechnology. 11 (1), 24 (2000).</li><li>Xie, H., Liu, Z., Fang, D., Dai, F., Gao, H., Zhao, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+study+on+the+digital+nano-moir&#233;+method+and+its+phase+shifting+technique.">A study on the digital nano-moir&#233; method and its phase shifting technique.</a> Meas. Sci. Technol. 15 (9), 1716 (2004).</li><li>Wang, Q., Kishimoto, S., Yamauchi, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-directional+structural+characterization+of+hexagonal+packed+nanoparticles+by+hexagonal+digital+moir&#233;+method.">Three-directional structural characterization of hexagonal packed nanoparticles by hexagonal digital moir&#233; method.</a> Opt. Lett. 37 (4), 548-550 (2012).</li><li>Liu, Z., Lou, X., Gao, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deformation+analysis+of+MEMS+structures+by+modified+digital+moir&#233;+methods.">Deformation analysis of MEMS structures by modified digital moir&#233; methods.</a> Opt. Lasers Eng. 48 (11), 1067-1075 (2010).</li><li>Li, Y., Xie, H., Chen, P., Zhang, Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theoretical+analysis+of+moir&#233;+fringe+multiplication+under+a+scanning+electron+microscope.">Theoretical analysis of moir&#233; fringe multiplication under a scanning electron microscope.</a> Meas. Sci. Technol. 22 (2), 025301 (2010).</li><li>Patorski, K., Wielgus, M., Ekielski, M., Ka&#378;mierczak, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AFM+nanomoir&#233;+technique+with+phase+multiplication.">AFM nanomoir&#233; technique with phase multiplication.</a> Meas. Sci. Technol. 24 (3), 035402 (2013).</li><li>Wang, Q., Ri, S., Takashita, Y., Ogihara, S., Yoshida, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chapter+33:+Full-field+measurements+of+principal+strains+and+orientations+using+moir&#233;+fringes.">Chapter 33: Full-field measurements of principal strains and orientations using moir&#233; fringes.</a> Advancement of Optical Methods in Experimental Mechanics. 3, 251-259 (2017).</li><li>Wang, Z., Han, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Advanced+iterative+algorithm+for+phase+extraction+of+randomly+phase-shifted+interferograms.">Advanced iterative algorithm for phase extraction of randomly phase-shifted interferograms.</a> Opt. Lett. 29 (14), 1671-1673 (2004).</li><li>Wang, Q., Xie, H., Hu, Z., Zhang, J., Sun, J., Liu, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Residual+thermo-creep+deformation+of+copper+interconnects+by+phase-shifting+SEM+moir&#233;+method.">Residual thermo-creep deformation of copper interconnects by phase-shifting SEM moir&#233; method.</a> Appl. Mech. Mater. 83, 185-190 (2011).</li><li>Ri, S., Fujigaki, M., Morimoto, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sampling+moir&#233;+method+for+accurate+small+deformation+distribution+measurement.">Sampling moir&#233; method for accurate small deformation distribution measurement.</a> Exp. Mech. 50 (4), 501-508 (2010).</li><li>Ri, S., Muramatsu, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theoretical+error+analysis+of+the+sampling+moir&#233;+method+and+phase+compensation+methodology+for+single-shot+phase+analysis.">Theoretical error analysis of the sampling moir&#233; method and phase compensation methodology for single-shot phase analysis.</a> Appl. Opt. 51 (16), 3214-3223 (2012).</li><li>Wang, Q., Ri, S., Tsuda, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Digital+sampling+Moir&#233;+as+a+substitute+for+microscope+scanning+Moir&#233;+for+high-sensitivity+and+full-field+deformation+measurement+at+micron/nano+scales.">Digital sampling Moir&#233; as a substitute for microscope scanning Moir&#233; for high-sensitivity and full-field deformation measurement at micron/nano scales.</a> Appl. Opt. 55 (25), 6858-6865 (2016).</li><li>Dai, F., Wang, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Automatic+fringe+patterns+analysis+using+digital+processing+tehniques:+I+fringe+center+method.">Automatic fringe patterns analysis using digital processing tehniques: I fringe center method.</a> Acta Photonica Sinica. 28, 700-706 (1999).</li><li>Gutmann, B., Weber, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phase-shifter+calibration+and+error+detection+in+phase-shifting+applications:+a+new+method.">Phase-shifter calibration and error detection in phase-shifting applications: a new method.</a> Appl. Opt. 37 (32), 7624-7631 (1998).</li><li>Wang, Q., Kishimoto, S., Tanaka, Y., Kagawa, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micro/submicro+grating+fabrication+on+metals+for+deformation+measurement+based+on+ultraviolet+nanoimprint+lithography.">Micro/submicro grating fabrication on metals for deformation measurement based on ultraviolet nanoimprint lithography.</a> Opt. Lasers Eng. 51 (7), 944-948 (2013).</li><li>Min-Jin, T., Hui-Min, X., Yan-Jie, L., Xiao-Jun, L., Dan, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+grating+fabrication+technique+on+metal+films+using+UV-nanoimprint+lithography.">A new grating fabrication technique on metal films using UV-nanoimprint lithography.</a> Chin. Phys. Lett. 29 (9), 098101 (2012).</li></ol>

למחברים אין מה לחשוף.

בטכניקה המתוארת, צעד אחד מאתגר הוא מיקרו / ננו בקנה מידה רשת או סורגים (מקוצר כמו ייצור רשת) 26 אם אין דפוס תקופתי קיים על הדגימה. רשת המגרש צריך להיות אחיד לפני דפורמציה כי זה פרמטר חשוב למדידה עיוות. אם החומר הוא מתכת, סגסוגת מתכת, או קרמיקה, UV או חימום nithimprin...

מיקרו / ננו בקנה מידה מדידות עיוות הם חיוניים חיוני להערכת תכונות מכניות, התנהגויות חוסר יציבות, מדגיש שיורית, סדק המופעים של חומרים מתקדמים. מאז טכניקות אופטיות הם ללא מגע, שדה מלא, ולא הרסנית, שיטות אופטיות שונות פותחו עבור מדידת דפורמציה במהלך העשורים האחרונים. בשנים האחרונות, המיקרו / ננו בקנה מידה דפורמציה טכניקות המדידה כוללים בעיקר את שיטות moiré 1 , 2 , 3 , 4 , ניתוח פאזה גיאומטרי (GPA) 5 , 6 , Fourier טרנספורמציה (FT), מתאם תמונה דיגיטלית (DIC), ו דפוס אינטרפרמטריה אלקטרונית (ESPI). בין טכניקות אלה, GPA ו FT אינם מתאימים למדידות דפורמציה מורכבות כי תדרים מרובים קיימים. שיטת ה- DIC היא SIMאבל חסר אונים נגד הרעש כי המוביל דפורמציה הוא speckle אקראי. לבסוף, ESPI רגיש מאוד לרטט. בין מיקרו / ננו בקנה מידה שיטות moiré, השיטות הנפוצות ביותר כיום הם מיקרוסקופ סריקה שיטות moiré, כגון אלקטרונים סריקה moiré 7 , 8 , 9 , לייזר סריקה moiré 10 , 11 , ו מיקרוסקופ כוח אטומי (AFM) moiré 12 , וכמה שיטות moiré מבוסס מיקרוסקופ, כגון דיגיטלי / חופף moiré 13 , 14 , 15 השיטה ואת הכפל / שבורה moiré שיטה 16 , 17 . שיטת הסריקה moiré יש יתרונות רבים, כגון שדה רחב של נוף, reso גבוההלובן, וחוסר רגישות לרעש אקראי. עם זאת, שיטת הסריקה המסורתית אינה נוחה עבור מדידות זן דו-ממדיות מכיוון שיש צורך לסובב את שלב המדגם או את כיוון הסריקה ב -90 ° ולסרוק פעמיים כדי ליצור שוליים של moiré בשני כיוונים. סיבוב ותהליכי סריקה כפולה להציג שגיאת סיבוב ולקחת הרבה זמן, ברצינות להשפיע על דיוק המדידה של זן 2D, במיוחד עבור זן גזירה. אף על פי שהטכניקה הטמפורלית של הזזת הטמפרטורה 19 , 20 יכולה לשפר את דיוק המדידה של הדפורמציה, היא דורשת זמן ומכשיר פאזה מיוחד שאינו מתאים לבדיקות דינמיות. שיטת הדגימה moiré 21 , 22 יש דיוק גבוהה במדידות תזוזה ועכשיו הוא משמש בעיקר עבור מדידות סטיה על גשרים כאשר מכוניות pתַחַת. כדי להאריך את שיטת הדגימה moiré כדי מיקרו / ננו בקנה מידה 2 מדידות זן, שיטת כפל משוחזרת moiré פותח לאחרונה 23 מתוך 2 פיקסלים הדגימה moiré שוליים, שבו המדידות הן רגישות כפליים שדה רחב של נוף של סריקה שיטת moiré נשמר. יתר על כן, בשלב המרחבי הזזת דגימה שיטת moiré הוא פיתח גם מ רב פיקסל הדגימה moiré שוליים, המאפשר מדידות זן דיוק גבוהה. פרוטוקול זה יציג את הליך המדידה זן מפורט והוא צפוי לסייע לחוקרים ומהנדסים ללמוד כיצד למדוד דפורמציה, לשפר את תהליכי הייצור של חומרים ומוצרים.

<table border="0" cellpadding="0" cellspacing="0" width="737">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:208px;">Automatic Polishing Machine</td>
			<td style="width:161px;">Marumoto Struers K.K.</td>
			<td style="width:201px;">LaboPol-30, Labor Force-100</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="34">
			<td height="34" style="height:34px;width:208px;">Carbon Fiber Reinforced Plastic</td>
			<td style="width:161px;">Mitsubishi Plastics, Inc.&#160;</td>
			<td style="width:201px;">HYEJ16M95DHX1</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="85">
			<td height="85" style="height:85px;width:208px;">Computer</td>
			<td style="width:161px;">DELL Japan</td>
			<td style="width:201px;">VOSTRO</td>
			<td style="width:167px;">Can be replaced with another computer with C++ programming language</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:208px;">Image Recording Software</td>
			<td style="width:161px;">Lasertec Corporation</td>
			<td style="width:201px;">LMEYE7</td>
			<td style="width:167px;">Installed in a laser scanning microscope</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:208px;">Ion Coater</td>
			<td style="width:161px;">Japan Electron Optics Laboratory Ltd.</td>
			<td style="width:201px;">JEC3000F</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:208px;">Laser Scanning Microscope</td>
			<td style="width:161px;">Lasertec Corporation</td>
			<td style="width:201px;">OPTELICS HYBRID</td>
			<td></td>
		</tr>
		<tr height="90">
			<td height="90" style="height:90px;width:208px;">Nanoimprint Device</td>
			<td style="width:161px;">Japan Laser Corporation&#160;</td>
			<td style="width:201px;">EUN-4200</td>
			<td style="width:167px;">Can be replaced with a electron beam lithography device or a focused ion beam milling device</td>
		</tr>
		<tr height="90">
			<td height="90" style="height:90px;width:208px;">Nanoimprint Mold</td>
			<td style="width:161px;">SCIVAX Corporation</td>
			<td style="width:201px;">3.0&#956;m pitch</td>
			<td style="width:167px;">Customized</td>
		</tr>
		<tr height="90">
			<td height="90" style="height:90px;width:208px;">Nanoimprint Resist</td>
			<td style="width:161px;">Toyo Gosei Co., Ltd&#160;</td>
			<td style="width:201px;">PAK01</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:208px;">Polishing Solution</td>
			<td style="width:161px;">Marumoto Struers K.K.</td>
			<td style="width:201px;">DP-Spray P 15&#956;m, 1&#956;m, 0.25&#956;m</td>
			<td>Use from coarse to fine</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:208px;">Pipet</td>
			<td style="width:161px;">AS ONE Corporation</td>
			<td style="width:201px;">10mL</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:208px;">Sand Paper</td>
			<td style="width:161px;">Marumoto Struers K.K.</td>
			<td style="width:201px;">SiC Foil #320, #800</td>
			<td>Use from coarse to fine</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:208px;">Spin Coater</td>
			<td>MIKASA Corporation</td>
			<td style="width:201px;">MS-A100</td>
			<td></td>
		</tr>
	</tbody>
</table>

micro/nano-scale strain distribution measurement from sampling moir&#233; fringes

עבודה זו מתארת ​​את הליך המדידה והעקרונות של טכניקת הדגימה moiré עבור שדה מלא מיקרו / ננו בקנה מידה מדידות עיוות. הטכניקה המפותחת יכולה להתבצע בשתי דרכים: שימוש בשיטת moiré הכפולה המשוחזרת או בשיטה המירבית של הדגימה. כאשר הדגימה הרשת הוא סביב 2 פיקסלים, 2 פיקסלים הדגימה moiré שוליים נוצרות לשחזר דפוס moiré כפל עבור מדידת דפורמציה. הן עקירה והן רגישויות זן גבוהים פי שניים מאשר בשיטה המסורתית סריקה moiré באותו שדה רחב של נוף. כאשר הדגימה של רשת הדגימה נמצאת סביב או גדולה מ -3 פיקסלים, הדגימה מרובת הדגימה של הדגימה moiré נוצרת, וטכניקה של שינוי מרחבי של שלב משולבת למדידת עיוות שדה מלא. הדיוק למדידת המתח משופר באופן משמעותי, ומדידת אצווה אוטומטית היא ניתנת להשגה בקלות.שתי השיטות יכולות למדוד את התפלגות המימדים הדו-ממדית (2D) מתמונת רשת חד-פעמית ללא סיבוב הדגימה או קווי הסריקה, כמו בטכניקות moiré מסורתיות. כדוגמאות, את ההעתקה 2D ו זנים הפצות, כולל זנים גזירה של שני פחמן מחוזק סיבי פלסטיק, נמדדו בבדיקות כיפוף שלוש נקודות. הטכניקה המוצעת צפויה למלא תפקיד חשוב בהערכות כמותיות לא הרסניות של תכונות מכניות, התרחשויות סדק, וכן מדדים שיוריים של מגוון חומרים.

ההעתקה הדו-ממדית והפצת המתח של שני דגימות של פחמן מחוזק בסיבי פחמן (CFRP) (# 1 ו- # 2) נמדדו על פי עקרון היווצרות moir® 23 ותהליך המדידה ( איור 1 ). הדגימות CFRP היו עשויים 10-11 מיקרומטר קוטר K13D סיבי פחמן שרפים אפוקסי. הדפורמציה של CFRP # 1 נ...

Watch this Scientific Journal Video about Micro/Nano-scale Strain Distribution Measurement from Sampling MoirÃƒÂ© Fringes at JoVE.com

Micro/Nano-scale Strain Distribution Measurement from Sampling Moir&#233; Fringes

טכניקה דגימה moiré שמציעות 2 פיקסל ורב פיקסל שיטות הדגימה עבור דיוק גבוהה מדידות הפצת זן מיקרו / ננו בקנה מידה מוצג כאן.

מיקרו / ננו בקנה מידה זן הפצה מדידה מדגימה Moiré שוליים

This work describes the measurement procedure and principles of a sampling moir&#233; technique for full-field micro/nano-scale deformation measurements. ...

micronano-scale-strain-distribution-measurement-from-sampling-moir

Research

JoVE Journal

Engineering

12.2K Views.  National Institute of Advanced Industrial Science and Technology (AIST).  טכניקה דגימה moiré שמציעות 2 פיקסל ורב פיקסל שיטות הדגימה עבור דיוק גבוהה מדידות הפצת זן מיקרו / ננו בקנה מידה מוצג כאן. 

Video: Micro/Nano-scale Strain Distribution Measurement from Sampling Moiré Fringes

Measurement of Scattering Nonlinearities from a Single Plasmonic Nanoparticle

Plasmonics, which are based on the collective oscillation of electrons due to light excitation, involve strongly enhanced local electric fields and thus have potential applications in nonlinear optics, which requires extraordinary optical intensity. One of the most studied nonlinearities in plasmonics is nonlinear absorption, including saturation and reverse saturation behaviors. Although scattering and absorption in nanoparticles are closely correlated by the Mie theory, there has been no report of nonlinearities in plasmonic scattering until very recently. 
Last year, not only saturation, but also reverse saturation of scattering in an isolated plasmonic particle was demonstrated for the first time. The results showed that saturable scattering exhibits clear wavelength dependence, which seems to be directly linked to the localized surface plasmon resonance (LSPR). Combined with the intensity-dependent measurements, the results suggest the possibility of a common mechanism underlying the nonlinear behaviors of scattering and absorption. These nonlinearities of scattering from a single gold nanosphere (GNS) are widely applicable, including in super-resolution microscopy and optical switches. 
In this paper, it is described in detail how to measure nonlinearity of scattering in a single GNP and how to employ the super-resolution technique to enhance the optical imaging resolution based on saturable scattering. This discovery features the first super-resolution microscopy based on nonlinear scattering, which is a novel non-bleaching contrast method that can achieve a resolution as low as l/8 and will potentially be useful in biomedicine and material studies.

Saturable and reverse saturable scattering were discovered in isolated plasmonic particles and adopted as a novel non-bleaching contrast method in super-resolution microscopy. Here the experimental procedures of detecting and extracting nonlinear scattering are explained in detail, as well as how to enhance resolution with the aid of saturated excitation microscopy.

מדידת פיזור אי-לינאריות מNanoparticle Plasmonic יחיד

Plasmonics, which are based on the collective oscillation of electrons due to light excitation, involve strongly enhanced local electric fields and thus ...

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation

Shape Memory Alloys (SMA) using elastocaloric cooling processes have the potential to be an environmentally friendly alternative to the conventional vapor compression based cooling process. Nickel-Titanium (Ni-Ti) based alloy systems, especially, show large elastocaloric effects. Furthermore, exhibit large latent heats which is a necessary material property for the development of an efficient solid-state based cooling process. A scientific test rig has been designed to investigate these processes and the elastocaloric effects in SMAs. The realized test rig enables independent control of an SMA&#39;s mechanical loading and unloading cycles, as well as conductive heat transfer between SMA cooling elements and a heat source/sink. The test rig is equipped with a comprehensive monitoring system capable of synchronized measurements of mechanical and thermal parameters. In addition to determining the process-dependent mechanical work, the system also enables measurement of thermal caloric aspects of the elastocaloric cooling effect through use of a high-performance infrared camera. This combination is of particular interest, because it allows illustrations of localization and rate effects &#8212; both important for efficient heat transfer from the medium to be cooled.
The work presented describes an experimental method to identify elastocaloric material properties in different materials and sample geometries. Furthermore, the test rig is used to investigate different cooling process variations. The introduced analysis methods enable a differentiated consideration of material, process and related boundary condition influences on the process efficiency. The comparison of the experimental data with the simulation results (of a thermomechanically coupled finite element model) allows for better understanding of the underlying physics of the elastocaloric effect. In addition, the experimental results, as well as the findings based on the simulation results, are used to improve the material properties.

Experimental methods for investigation of solid state cooling processes and characterization of elastocaloric material properties of Shape Memory Alloys (SMA) are presented. A custom-built test rig has been designed for controlling and comprehensive monitoring of elastocaloric cooling processes. Furthermore, it provides a validation platform for thermomechanically coupled modeling approaches.

שיטות ניסיוניות לחקירות זיכרון צורה Elastocaloric בהתבסס תהליכי קירור ותיקוף דגם

Shape Memory Alloys (SMA) using elastocaloric cooling processes have the potential to be an environmentally friendly alternative to the conventional vapor ...

Strain Sensing Based on Multiscale Composite Materials Reinforced with Graphene Nanoplatelets

The electrical response of NH2-functionalized graphene nanoplatelets composite materials under strain was studied. Two different manufacturing methods are proposed to create the electrical network in this work: (a) the incorporation of the nanoplatelets into the epoxy matrix and (b) the coating of the glass fabric with a sizing filled with the same nanoplatelets. Both types of multiscale composite materials, with an in-plane electrical conductivity of ~10-3 S/m, showed an exponential growth of the electrical resistance as the strain increases due to distancing between adjacent functionalized graphene nanoplatelets and contact loss between overlying ones. The sensitivity of the materials analyzed during this research, using the described procedures, has been shown to be higher than commercially available strain gauges. The proposed procedures for self-sensing of the structural composite material would facilitate the structural health monitoring of components in difficult to access emplacements such as offshore wind power farms. Although the sensitivity of the multiscale composite materials was considerably higher than the sensitivity of metallic foils used as strain gauges, the value reached with NH2 functionalized graphene nanoplatelets coated fabrics was nearly an order of magnitude superior. This result elucidated their potential to be used as smart fabrics to monitor human movements such as bending of fingers or knees. By using the proposed method, the smart fabric could immediately detect the bending and recover instantly. This fact permits precise monitoring of the time of bending as well as the degree of bending.

The integration of conductive nanoparticles, such as graphene nanoplatelets, into glass fiber composite materials creates an intrinsic electrical network susceptible to strain. Here, different methods to obtain strain sensors based on the addition of graphene nanoplatelets into the epoxy matrix or as a coating on glass fabrics are proposed.

חישה מבוססת עומס על מחוזק חומרים מרוכבים Multiscale עם גראפן Nanoplatelets

The electrical response of NH2-functionalized graphene nanoplatelets composite materials under strain was studied. Two different manufacturing methods are ...

Optical Trap Loading of Dielectric Microparticles In Air

We demonstrate a method to trap a selected dielectric microparticle in air using radiation pressure from a single-beam gradient optical trap. Randomly scattered dielectric microparticles adhered to a glass substrate are momentarily detached using ultrasonic vibrations generated by a piezoelectric transducer (PZT). Then, the optical beam focused on a selected particle lifts it up to the optical trap while the vibrationally excited microparticles fall back to the substrate. A particle may be trapped at the nominal focus of the trapping beam or at a position above the focus (referred to here as the levitation position) where gravity provides the restoring force. After the measurement, the trapped particle can be placed at a desired position on the substrate in a controlled manner. 
In this protocol, an experimental procedure for selective optical trap loading in air is outlined. First, the experimental setup is briefly introduced. Second, the design and fabrication of a PZT holder and a sample enclosure are illustrated in detail. The optical trap loading of a selected microparticle is then demonstrated with step-by-step instructions including sample preparation, launching into the trap, and use of electrostatic force to excite particle motion in the trap and measure charge. Finally, we present recorded particle trajectories of Brownian and ballistic motions of a trapped microparticle in air. These trajectories can be used to measure stiffness or to verify optical alignment through time domain and frequency domain analysis. Selective trap loading enables optical tweezers to track a particle and its changes over repeated trap loadings in a reversible manner, thereby enabling studies of particle-surface interaction.

A protocol for launching and stably trapping selected dielectric microparticles in air is presented.

טוען מלכודת אופטית של דיאלקטרי microparticles באוויר

We demonstrate a method to trap a selected dielectric microparticle in air using radiation pressure from a single-beam gradient optical trap. Randomly ...

Standardized Method for Measuring Collection Efficiency from Wipe-sampling of Trace Explosives

One of the limiting steps to detecting traces of explosives at screening venues is effective collection of the sample. Wipe-sampling is the most common procedure for collecting traces of explosives, and standardized measurements of collection efficiency are needed to evaluate and optimize sampling protocols. The approach described here is designed to provide this measurement infrastructure, and controls most of the factors known to be relevant to wipe-sampling. Three critical factors (the applied force, travel distance, and travel speed) are controlled using an automated device. Test surfaces are chosen based on similarity to the screening environment, and the wipes can be made from any material considered for use in wipe-sampling. Particle samples of the explosive 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) are applied in a fixed location on the surface using a dry-transfer technique. The particle samples, recently developed to simulate residues made after handling explosives, are produced by inkjet printing of RDX solutions onto polytetrafluoroethylene (PTFE) substrates. Collection efficiency is measured by extracting collected explosive from the wipe, and then related to critical sampling factors and the selection of wipe material and test surface. These measurements are meant to guide the development of sampling protocols at screening venues, where speed and throughput are primary considerations.

Optimized sampling protocols and the development of new wipe materials can be facilitated by standardized measurements of collection efficiency from wipe-sampling. Our approach for sampling trace explosives uses an automated device to control speed, force, and distance during wipe-sampling followed by extraction of collected explosives.

שיטה סטנדרטית למדידת יעילות גבייה נגב-דגימה של חומרי נפץ Trace

One of the limiting steps to detecting traces of explosives at screening venues is effective collection of the sample. Wipe-sampling is the most common ...

Generation of Size-controlled Poly (ethylene Glycol) Diacrylate Droplets via Semi-3-Dimensional Flow Focusing Microfluidic Devices

Uniform and size-controllable poly (ethylene glycol) diacrylate (PEGDA) droplets could be produced via the flow focusing process in a microfluidic device. This paper proposes a semi-three-dimensional (semi-3D) flow-focusing microfluidic chip for droplet formation. The polydimethylsiloxane (PDMS) chip was fabricated using the multi-layer soft lithography method. Hexadecane containing surfactant was used as the continuous phase, and PEGDA with the ultraviolet (UV) photo-initiator was the dispersed phase. Surfactants allowed the local surface tension to drop and formed a more cusped tip which promoted breaking into tiny micro-droplets. As the pressure of dispersed phase was constant, the size of droplets became smaller with increasing continuous phase pressure before dispersed phase flow was broken off. As a result, droplets with size variation from 1 &#181;m to 80 &#181;m in diameter could be selectively achieved by changing the pressure ratio in two inlet channels, and the average coefficient of variation was estimated to be below 7%. Furthermore, droplets could turn into micro-beads by UV exposure for photo-polymerization. Conjugating biomolecules on such micro-beads surface have many potential applications in the fields of biology and chemistry.

Generation of Size-controlled Poly ethylene Glycol Diacrylate Droplets via Semi-3-Dimensional Flow Focusing Microfluidic Devices

Here, we present a protocol to illustrate the fabrication processes and verifying experiments of a semi-three-dimensional (semi-3D) flow-focusing microfluidic chip for droplet formation.

דור של פולי שבשליטת גודל (אתילן גליקול) Diacrylate טיפות דרך דו-תלת-ממדי לזרום התמקדות Microfluidic מכשירים

Uniform and size-controllable poly (ethylene glycol) diacrylate (PEGDA) droplets could be produced via the flow focusing process in a microfluidic device. ...

Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates

Many body armor designs incorporate unidirectional (UD) laminates. UD laminates are constructed of thin (&#60;0.05 mm) layers of high-performance yarns, where the yarns in each layer are oriented parallel to each other and held in place using binder resins and thin polymer films. The armor is constructed by stacking the unidirectional layers in different orientations. To date, only very preliminary work has been performed to characterize the ageing of the binder resins used in unidirectional laminates and the effects on their performance. For example, during the development of the conditioning protocol used in the National Institute of Justice Standard-0101.06, UD laminates showed visual signs of delamination and reductions in V50, which is the velocity at which half of the projectiles are expected to perforate the armor, after ageing. A better understanding of the material property changes in UD laminates is necessary to comprehend the long-term performance of armors constructed from these materials. There are no current standards recommended for mechanically interrogating unidirectional (UD) laminate materials. This study explores methods and best practices for accurately testing the mechanical properties of these materials and proposes a new test methodology for these materials. Best practices for ageing these materials are also described.

The goal of the study was to develop protocols to prepare consistent specimens for accurate mechanical testing of high-strength aramid or ultra-high-molar-mass polyethylene-based flexible unidirectional composite laminate materials and to describe protocols for performing artificial ageing on these materials.

הליכי גזירה, בדיקות מתיחה, ו ההזדקנות של ציפויים חד כיווני חד-כיווני מרוכבים

Many body armor designs incorporate unidirectional (UD) laminates. UD laminates are constructed of thin (&#60;0.05 mm) layers of high-performance yarns, ...

Intermediate Strain Rate Material Characterization with Digital Image Correlation

The mechanical response of a material under dynamic load is typically different than its behavior under static conditions; therefore, the common quasistatic equipment and procedures used for material characterization are not applicable for materials under dynamic loads. The dynamic response of a material depends on its deformation rate and is broadly categorized into high (i.e., greater than 200/s), intermediate (i.e., 10&#8722;200/s) and low strain rate regimes (i.e., below 10/s). Each of these regimes calls for specific facilities and testing protocols to ensure the reliability of the acquired data. Due to the limited access to high-speed servo-hydraulic facilities and validated testing protocols, there is a noticeable gap in the results at the intermediate strain rate. The current manuscript presents a validated protocol for the characterization of different materials at these intermediate strain rates. Strain gauge instrumentation and digital image correlation protocols are also included as complimentary modules to extract the utmost level of detailed data from every single test. Examples of raw data, obtained from a variety of materials and test setups (e.g., tensile and shear) is presented and the analysis procedure used to process the output data is described. Finally, the challenges of dynamic characterization using the current protocol, along with the limitations of the facility and methods of overcoming potential problems are discussed.

Here we present a methodology for the dynamic characterization of tensile specimens at intermediate strain rates using a high-speed servo-hydraulic load frame. Procedures for strain gauge instrumentation and analysis, as well as for digital image correlation strain measurements on the specimens, are also defined.

אפיון חומרים קצב למתח ביניים עם המתאם תמונה דיגיטלי

The mechanical response of a material under dynamic load is typically different than its behavior under static conditions; therefore, the common ...

Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper

The current analytical techniques for characterizing printing and graphic arts substrates are largely ex situ and destructive. This limits the amount of data that can be obtained from an individual sample and renders it difficult to produce statistically relevant data for unique and rare materials. Resonant cavity dielectric spectroscopy is a non-destructive, contactless technique which can simultaneously interrogate both sides of a sheeted material and provide measurements which are suitable for statistical interpretations. This offers analysts the ability to quickly discriminate between sheeted materials based on composition and storage history. In this methodology article, we demonstrate how contactless resonant cavity dielectric spectroscopy may be used to differentiate between paper analytes of varying fiber species compositions, to determine the relative age of the paper, and to detect and quantify the amount of post-consumer waste (PCW) recycled fiber content in manufactured office paper.

A protocol for the non-destructive analysis of the fiber content and relative age of paper.

פיתוח שיטה עבור מדעי החלל ללא מגע מכשירים ספקטרוסקופיים הדיאלקטרי של הנייר תאית

The current analytical techniques for characterizing printing and graphic arts substrates are largely ex situ and destructive. This limits the amount of ...

Production of a Strain-Measuring Device with an Improved 3D Printer

A traditional strain measurement sensor needs to be electrified and is susceptible to electromagnetic interference. In order to solve the fluctuations in the analog electrical signal in a traditional strain gauge operation, a new strain measurement method is presented here. It uses a photographic technique to display the strain change by amplifying the change of the pointer displacement of the mechanism. A visual polydimethylsiloxane (PDMS) lens with a focal length of 7.16 mm was added to a smartphone camera to generate a lens group acting as a microscope to capture images. It had an equivalent focal length of 5.74 mm. Acrylonitrile butadiene styrene (ABS) and nylon amplifiers were used to test the influence of different materials on the sensor performance. The production of the amplifiers and PDMS lens is based on improved 3D printing technology. The data obtained were compared with the results from finite element analysis (FEA) to verify their validity. The sensitivity of the ABS amplifier was 36.03 &plusmn; 1.34 &#181;&epsilon;/&#181;m, and the sensitivity of the nylon amplifier was 36.55 &plusmn; 0.53 &#181;&epsilon;/&#181;m.

This work presents a strain measurement sensor consisting of an amplification mechanism and a polydimethylsiloxane microscope manufactured using an improved 3D printer.

הפקה של התקן מדידת מתח עם מדפסת תלת-ממד משופרת

A traditional strain measurement sensor needs to be electrified and is susceptible to electromagnetic interference. In order to solve the fluctuations in ...