the-evolution-silica-nanoparticle-polyester-coatings-on-surfaces

The Evolution of Silica Nanoparticle-polyester Coatings on Surfaces Exposed to Sunlight

Corrosion of metallic surfaces is prevalent in the environment and is of great concern in many areas, including the military, transport, aviation, ...

BlueScope Steel Research

Acrylic polymers, including poly(methyl methacrylate), poly(2,2,2-trifluoroethyl methacrylate), poly( N,N'-dimethyaminoethyl methacrylate), and poly(2-hydroxyethyl methacrylate) were grafted from flat nickel and copper surfaces through surface-initiated atom transfer radical polymerization (ATRP). For the nickel system, there was a linear relationship between polymer layer thickness and monomer conversion or molecular weight of "free" polymers. The thickness of the polymer brush films was greater than 80 nm after 6 h of reaction time. The grafting density was estimated to be 0.40 chains/nm2. The "living" chain ends of grafted polymers were still active and initiated the growth of a second block of polymer. Block copolymer brushes with different block sequences were successfully prepared. The experimental surface chemical compositions as measured by X-ray photoelectron spectroscopy agreed very well with their theoretical values. Water contact angle measurements further confirmed the successful grafting of polymers from nickel and copper surfaces. The surface morphologies of all samples were studied by atomic force microscopy. This study provided a novel approach to prepare stable functional polymer coatings on reactive metal surfaces.

Grafting acrylic polymers from flat nickel and copper surfaces by surface-initiated atom transfer radical polymerization.

Responsive surfaces show potential for many applications; however, the molecular mechanisms of their responsive behavior are often dependent on the nature and properties of the substrate and this dependence is not fully understood. We present a molecular dynamics study on the mechanical response of poly(ethylene glycol) (PEG) grafted on substrates of varying flexibility in "dry" conditions. Our in silico surface loading tests show that when PEG is grafted onto a hard substrate (silica), there is a significant reduction in adhesion to a solid surface, owing to augmented steric repulsions at the interface. However, when the same chains are tethered onto a soft substrate (polyester), interfacial adhesion is strengthened. We find that the deformable substrate allows significant rearrangement of the subsurface and grafted segments during loading. Asperities along the rough soft surface also provide free volume for the tethered chains to occupy, enabling them to carpet the surface and increasing the density at the interface. Our results explain the molecular basis of the mechanical response of PEG when grafted onto hard and soft substrates and provide a rationale for surface protection using PEG.

Effect of substrate on the mechanical response and adhesion of PEGylated surfaces: insights from all-atom simulations.

A computational modeling methodology has been developed and employed to characterize the nanoscale wettability and antifouling properties of functionalized hard and deformable surfaces, with a specific focus on poly(ethylene glycol) grafted substrates and their resistance to graphitic carbons. Empirical evidence suggests that the antifouling behavior of polyethylene PEG is associated with two main mechanisms: steric repulsions and hydration via formation of a structured water layer. However, there is also little attention paid to the contribution of steric repulsion vs surface hydration. We examine these two mechanisms through a combination of in silico contact angle and force measurements at the nanoscale level. We investigate the properties of the grafted functional chains and the underlying substrate, responsible for resisting surface deposition of graphitic contaminants in aqueous solution. Our results reveal that the fouling-release efficiency is enhanced when PEG chains are grafted onto hard hydrophilic substrates such as silica in contrast to deformable polymer substrates where surface modifications are effectively mitigated during interfacial contact with a hard contaminant. We conclude that the contribution of steric repulsion vs surface hydration to the antifouling ability of surfaces is strongly dependent on the nanoscale structure and deformability of the substrate. This generic method can be applied to examine individual contribution of steric repulsions and surface hydration to antifouling performance of grafted chains.

Nanoscale wetting and fouling resistance of functionalized surfaces: a computational approach.

The class I hydrophobin EAS is part of a family of small, amphiphilic fungal proteins best known for their ability to self-assemble into stable monolayers that modify the hydrophobicity of a surface to facilitate further microbial growth. These proteins have attracted increasing attention for industrial and biomedical applications, with the aim of designing surfaces that have the potential to maintain their clean state by resisting non-specific protein binding. To gain a better understanding of this process, we have employed all-atom molecular dynamics to study initial stages of the spontaneous adsorption of monomeric EAS hydrophobin on fully hydroxylated silica, a commonly used industrial and biomedical substrate. Particular interest has been paid to the Cys3-Cys4 loop, which has been shown to exhibit disruptive behavior in solution, and the Cys7-Cys8 loop, which is believed to be involved in the aggregation of EAS hydrophobin at interfaces. Specific and water mediated interactions with the surface were also analyzed. We have identified two possible binding motifs, one which allows unfolding of the Cys7-Cys8 loop due to the surfactant-like behavior of the Cys3-Cys4 loop, and another which has limited unfolding due to the Cys3-Cys4 loop remaining disordered in solution. We have also identified intermittent interactions with water which mediate the protein adsorption to the surface, as well as longer lasting interactions which control the diffusion of water around the adsorption site. These results have shown that EAS behaves in a similar way at the air-water and surface-water interfaces, and have also highlighted the need for hydrophilic ligand functionalization of the silica surface in order to prevent the adsorption of EAS hydrophobin.

Surface-water Interface Induces Conformational Changes Critical for Protein Adsorption: Implications for Monolayer Formation of EAS Hydrophobin.

A lack in the detailed understanding of mechanisms through which proteins adsorb or are repelled at various solid/liquid interfaces limits the capacity to rationally design and produce more sophisticated surfaces with controlled protein adsorption in both biomedical and industrial settings. To date there are three main approaches to achieve anti biofouling efficacy, namely chemically adjusting the surface hydrophobicity and introducing various degrees of surface roughness, or a combination of both. More recently, surface nanostructuring has been shown to have an effect on protein adsorption. However, the current resolution of experimental techniques makes it difficult to investigate these three phase systems at the molecular level. In this molecular dynamics study we explore in all-atom detail the adsorption process of one of the most surface active proteins, EAS hydrophobin, known for its versatile ability to self-assemble on both hydrophobic and hydrophilic surfaces forming stable monolayers that facilitate further biofilm growth. We model the adsorption of this protein on organic ligand protected silica surfaces with varying degrees of chemical heterogeneity and roughness, including fully homogenous hydrophobic and hydrophilic surfaces for comparison. We present a detailed characterisation of the functionalised surface structure and dynamics for each of these systems, and the effect the ligands have on interfacial water, the adsorption process and conformational rearrangements of the protein. Results suggest that the ligand arrangement that produces the highest hydrophilic chain mobility and the lack of significant hydrophobic patches shows the most promising anti-fouling efficacy toward hydrophobin. However, the presence on the protein surface of a flexible loop with amphipathic character (the Cys3-Cys4 loop) is seen to facilitate EAS adsorption on all surfaces by enabling the protein to match the surface pattern.

Shane Maclaughlin

BlueScope Steel Research

The Evolution of Silica Nanoparticle-polyester Coatings on Surfaces Exposed to Sunlight