Newton's second law is applied to obtain the linear momentum in a control volume in a fluid system. According to this law, the rate of change of linear momentum is equal to the sum of external forces acting on the system. When a control volume matches the fluid system at a specific moment, the forces acting on both are identical. Reynolds transport theorem helps explain this by breaking down the system's linear momentum into two components: the rate of change of linear momentum within the control volume and the net flow of linear momentum across the control surface.

As mass moves in and out of the control volume, it carries linear momentum with it, making the transfer of momentum analogous to the flow of mass. For control volumes that are fixed, nondeforming, and stationary, Newton's second law provides an accurate representation of the system's dynamics. It accounts for internal changes in momentum as well as the momentum flowing across the boundaries of the control surface. This theoretical framework is essential in fluid dynamics for analyzing forces, motion, and interactions within well-defined regions of flow, making it applicable to a wide range of engineering problems.

Dal capitolo 18:

article

Now Playing

18.4 : Linear Momentum in Control Volume

Finite Control Volume Analysis

11 Visualizzazioni

article

18.1 : Conservazione della massa in volumi finiti di cotrolo

Finite Control Volume Analysis

27 Visualizzazioni

article

18.2 : Conservazione della massa in volume di controllo fisso e non deformabile

Finite Control Volume Analysis

14 Visualizzazioni

article

18.3 : Conservazione della massa nel volume di controllo in movimento e non deformato

Finite Control Volume Analysis

14 Visualizzazioni

article

18.5 : Applicazione dell'equazione del momento lineare

Finite Control Volume Analysis

11 Visualizzazioni

article

18.6 : Equazione del momento di quantità di moto

Finite Control Volume Analysis

16 Visualizzazioni

article

18.7 : Conservazione dell'energia nel volume di controllo

Finite Control Volume Analysis

12 Visualizzazioni

article

18.8 : Applicazione dell'equazione dell'energia

Finite Control Volume Analysis

27 Visualizzazioni

article

18.9 : Esempio di progetto: Forze nella paratoia

Finite Control Volume Analysis

45 Visualizzazioni

JoVE Logo

Riservatezza

Condizioni di utilizzo

Politiche

Ricerca

Didattica

CHI SIAMO

Copyright © 2025 MyJoVE Corporation. Tutti i diritti riservati