Figure 1, 2, 3, 4, 6, 8 e tabelle 2, 3, 10, 15, 16 vengono modificati dal Ref 29. Questo lavoro è stato sostenuto dal National Science Foundation (NSF concedere-CCF 1.117.143 e NSF-CCF 1.162.141 a GS). Y.-JC è stata sostenuta da borse di studio del governo di Taiwan. SDR è stato sostenuto dalla Science Foundation Graduate Research Fellowship Program Nazionale (GRFP).

<ol>
	<li>Zhang, D. Y., Seelig, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamic+DNA+nanotechnology+using+strand-displacement+reactions.">Dynamic DNA nanotechnology using strand-displacement reactions.</a> Nat. Chem. 3, 103-113 (2011).</li><li>Krishnan, Y., Simmel, F. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nucleic+acid+based+molecular+devices.">Nucleic acid based molecular devices.</a> Angew. Chem. Int. Ed. Engl. 50, 3124-3156 (2011).</li><li>Zhang, D. Y., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Control+of+DNA+strand+displacement+kinetics+using+toehold+exchange.">Control of DNA strand displacement kinetics using toehold exchange.</a> J. Am. Chem. Soc. 131, 17303-17314 (2009).</li><li>Qian, L., Winfree, E., Bruck, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neural+network+computation+with+DNA+strand+displacement+cascades.">Neural network computation with DNA strand displacement cascades.</a> Nature. 475, 368-372 (2011).</li><li>Qian, L., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scaling+up+digital+circuit+computation+with+DNA+strand+displacement+cascades.">Scaling up digital circuit computation with DNA strand displacement cascades.</a> Science. 332, 1196-1201 (2011).</li><li>Zadegan, R. M., Jepsen, M. D., Hildebrandt, L. L., Birkedal, V., Kjems, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Construction+of+a+fuzzy+and+boolean+logic+gates+based+on+DNA.">Construction of a fuzzy and boolean logic gates based on DNA.</a> Small. 11, 1811-1817 (2015).</li><li>Seelig, G., Soloveichik, D., Zhang, D. Y., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Enzyme-free+nucleic+acid+logic+circuits.">Enzyme-free nucleic acid logic circuits.</a> Science. 314, 1585-1588 (2006).</li><li>Zadegan, R. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Construction+of+a+4+zeptoliters+switchable+3D+DNA+box+origami.">Construction of a 4 zeptoliters switchable 3D DNA box origami.</a> ACS Nano. 6, 10050-10053 (2012).</li><li>Andersen, E. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-assembly+of+a+nanoscale+DNA+box+with+a+controllable+lid.">Self-assembly of a nanoscale DNA box with a controllable lid.</a> Nature. 459, 73-76 (2009).</li><li>Zhang, D. Y., Hariadi, R. F., Choi, H. M., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrating+DNA+strand-displacement+circuitry+with+DNA+tile+self-assembly.">Integrating DNA strand-displacement circuitry with DNA tile self-assembly.</a> Nat. Commun. 4, (1965).</li><li>Yurke, B., Turberfield, A. J., Mills, A. P., Simmel, F. C., Neumann, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+DNA-fuelled+molecular+machine+made+of+DNA.">A DNA-fuelled molecular machine made of DNA.</a> Nature. 406, 605-608 (2000).</li><li>Green, S. J., Lubrich, D., Turberfield, A. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+hairpins:+fuel+for+autonomous+DNA+devices.">DNA hairpins: fuel for autonomous DNA devices.</a> Biophys. J. 91, 2966-2975 (2006).</li><li>Venkataraman, S., Dirks, R. M., Rothemund, P. W., Winfree, E., Pierce, N. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+autonomous+polymerization+motor+powered+by+DNA+hybridization.">An autonomous polymerization motor powered by DNA hybridization.</a> Nat. Nanotechnol. 2, 490-494 (2007).</li><li>Green, S. J., Bath, J., Turberfield, A. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coordinated+chemomechanical+cycles:+a+mechanism+for+autonomous+molecular+motion.">Coordinated chemomechanical cycles: a mechanism for autonomous molecular motion.</a> Phys. Rev. Lett. 101, 238101 (2008).</li><li>Omabegho, T., Sha, R., Seeman, N. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+bipedal+DNA+Brownian+motor+with+coordinated+legs.">A bipedal DNA Brownian motor with coordinated legs.</a> Science. 324, 67-71 (2009).</li><li>Turberfield, A. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+fuel+for+free-running+nanomachines.">DNA fuel for free-running nanomachines.</a> Phys. Rev. Lett. 90, 118102 (2003).</li><li>Dirks, R. M., Pierce, N. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Triggered+amplification+by+hybridization+chain+reaction.">Triggered amplification by hybridization chain reaction.</a> Proc. Natl. Acad. Sci. U. S. A. 101, 15275-15278 (2004).</li><li>Seelig, G., Yurke, B., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Catalyzed+relaxation+of+a+metastable+DNA+fuel.">Catalyzed relaxation of a metastable DNA fuel.</a> J. Am. Chem. Soc. 128, 12211-12220 (2006).</li><li>Zhang, D. Y., Turberfield, A. J., Yurke, B., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+entropy-driven+reactions+and+networks+catalyzed+by+DNA.">Engineering entropy-driven reactions and networks catalyzed by DNA.</a> Science. 318, 1121-1125 (2007).</li><li>Yin, P., Choi, H. M., Calvert, C. R., Pierce, N. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Programming+biomolecular+self-assembly+pathways.">Programming biomolecular self-assembly pathways.</a> Nature. 451, 318-322 (2008).</li><li>Chen, X., Briggs, N., McLain, J. R., Ellington, A. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stacking+nonenzymatic+circuits+for+high+signal+gain.">Stacking nonenzymatic circuits for high signal gain.</a> Proc. Natl. Acad. Sci. U. S. A. 110, 5386-5391 (2013).</li><li>Phillips, A., Cardelli, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+programming+language+for+composable+DNA+circuits.">A programming language for composable DNA circuits.</a> J. R. Soc. Interface. 6, S419-S436 (2009).</li><li>Lakin, M. R., Youssef, S., Polo, F., Emmott, S., Phillips, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visual+DSD:+a+design+and+analysis+tool+for+DNA+strand+displacement+systems.">Visual DSD: a design and analysis tool for DNA strand displacement systems.</a> Bioinformatics. 27, 3211-3213 (2011).</li><li>Lakin, M. R., Youssef, S., Cardelli, L., Phillips, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Abstractions+for+DNA+circuit+design.">Abstractions for DNA circuit design.</a> J. R. Soc. Interface. 9, 470-486 (2012).</li><li>Zhang, D. Y., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Robustness+and+modularity+properties+of+a+non-covalent+DNA+catalytic+reaction.">Robustness and modularity properties of a non-covalent DNA catalytic reaction.</a> Nucleic Acids Res. 38, 4182-4197 (2010).</li><li>Ducani, C., Kaul, C., Moche, M., Shih, W. M., Hogberg, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Enzymatic+production+of+'monoclonal+stoichiometric'+single-stranded+DNA+oligonucleotides.">Enzymatic production of 'monoclonal stoichiometric' single-stranded DNA oligonucleotides.</a> Nat. Methods. 10, 647-652 (2013).</li><li>Lin, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+cloning+of+artificial+DNA+nanostructures.">In vivo cloning of artificial DNA nanostructures.</a> Proc. Natl. Acad. Sci. U. S. A. 105, 17626-17631 (2008).</li><li>Bhatia, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Icosahedral+DNA+nanocapsules+by+modular+assembly.">Icosahedral DNA nanocapsules by modular assembly.</a> Angew. Chem. Int. Ed. Engl. 48, 4134-4137 (2009).</li><li>Chen, Y. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Programmable+chemical+controllers+made+from+DNA.">Programmable chemical controllers made from DNA.</a> Nat. Nanotechnol. 8, 755-762 (2013).</li><li>Arkin, A., Ross, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Computational+functions+in+biochemical+reaction+networks.">Computational functions in biochemical reaction networks.</a> Biophys. J. 67, 560-578 (1994).</li><li>&#201;rdi, P., T&#243;th, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Mathematical models of chemical reactions: theory and applications of deterministic and stochastic models. , (1989).</li><li>Magnasco, M. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemical+kinetics+is+Turing+universal.">Chemical kinetics is Turing universal.</a> Phys. Rev. Lett. 78, 1190 (1997).</li><li>Oishi, K., Klavins, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomolecular+implementation+of+linear+I/O+systems.">Biomolecular implementation of linear I/O systems.</a> IET Syst. Biol. 5, 252-260 (2011).</li><li>Senum, P., Riedel, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rate-independent+constructs+for+chemical+computation.">Rate-independent constructs for chemical computation.</a> PLoS One. 6, (2011).</li><li>Soloveichik, D., Cook, M., Winfree, E., Bruck, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Computation+with+finite+stochastic+chemical+reaction+networks.">Computation with finite stochastic chemical reaction networks.</a> Natural Computing. 7, 615-633 (2008).</li><li>Soloveichik, D., Seelig, G., Winfree, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+as+a+universal+substrate+for+chemical+kinetics.">DNA as a universal substrate for chemical kinetics.</a> Proc. Natl. Acad. Sci. U. S. A. 107, 5393-5398 (2010).</li><li>Tyson, J. J., Chen, K. C., Novak, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sniffers,+buzzers,+toggles+and+blinkers:+dynamics+of+regulatory+and+signaling+pathways+in+the+cell.">Sniffers, buzzers, toggles and blinkers: dynamics of regulatory and signaling pathways in the cell.</a> Curr. Opin. Cell. Biol. 15, 221-231 (2003).</li><li>Cardelli, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Two-domain+DNA+strand+displacement.">Two-domain DNA strand displacement.</a> Math. Struct. Comput. Sci. 23, 247-271 (2013).</li><li>Angluin, D., Aspnes, J., Eisenstat, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+simple+population+protocol+for+fast+robust+approximate+majority.">A simple population protocol for fast robust approximate majority.</a> Distrib. Comput. 21, 87-102 (2008).</li><li>Cardelli, L., Csikasz-Nagy, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+cell+cycle+switch+computes+approximate+majority.">The cell cycle switch computes approximate majority.</a> Sci. Rep. 2, 656 (2012).</li><li>Zadeh, J. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=NUPACK:+Analysis+and+design+of+nucleic+acid+systems.">NUPACK: Analysis and design of nucleic acid systems.</a> J. Comput. Chem. 32, 170-173 (2011).</li><li>Lee, P. Y., Costumbrado, J., Hsu, C. Y., Kim, Y. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Agarose+gel+electrophoresis+for+the+separation+of+DNA+fragments.">Agarose gel electrophoresis for the separation of DNA fragments.</a> J. Vis. Exp. , (2012).</li><li>Gibson, D. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Enzymatic+assembly+of+DNA+molecules+up+to+several+hundred+kilobases.">Enzymatic assembly of DNA molecules up to several hundred kilobases.</a> Nat. Methods. 6, 343-345 (2009).</li><li>Froger, A., Hall, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transformation+of+plasmid+DNA+into+E.+coli+using+the+heat+shock+method.">Transformation of plasmid DNA into E. coli using the heat shock method.</a> J. Vis. Exp. , e253 (2007).</li><li>Lessard, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transformation+of+E.+coli+via+electroporation.">Transformation of E. coli via electroporation.</a> Methods Enzymol. 529, 321-327 (2013).</li><li>Nasri, M., Thomas, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alteration+of+the+specificity+of+PvuII+restriction+endonuclease.">Alteration of the specificity of PvuII restriction endonuclease.</a> Nucleic Acids Res. 15, 7677-7687 (1987).</li><li>Dalchau, N., Seelig, G., Phillips, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Computational+design+of+reaction-diffusion+patterns+using+DNA-based+chemical+reaction+networks.">Computational design of reaction-diffusion patterns using DNA-based chemical reaction networks.</a> DNA Computing and Molecular Programming. , 84-99 (2014).</li><li>Scalise, D., Schulman, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Designing+modular+reaction-diffusion+programs+for+complex+pattern+formation.">Designing modular reaction-diffusion programs for complex pattern formation.</a> Technology. 2, 55-66 (2014).</li></ol>

The authors declare no competing financial interests.

Questo documento descrive un metodo per derivare cancelli ndsDNA da DNA plasmidico altamente puro. Inoltre, un protocollo è presentato per caratterizzare prestazioni cancello usando un test cinetica di fluorescenza. Dati sperimentali mostrano che il sistema plasmide derivato supera la sua controparte sintetica anche se il sistema di sintesi viene assemblato con trefoli purificato usando SDS-PAGE (PAGINA). Probabilmente, il miglioramento delle prestazioni di cancelli plasmide derivato è dovuta principalmente alla elevatissima purezza del DNA biologica. DNA sintetico contiene una varietà di errori, in particolare delezioni che provocano oligonucleotidi di lunghezza tali prodotti collaterali n-1, e sono tipicamente non completamente rimosso in PAGE o cromatografia liquida ad alta prestazione (HPLC) procedure di purificazione. Sono stati inoltre osservati miglioramenti simili a quelli riportati qui in un precedente studio di un amplificatore tornante catalizzata che usati DNA di origine biologica 21. <p class = &quot;jove_content&quot;&gt; Tuttavia, anche l&#39;utilizzo di porte plasmide derivato non può eliminare completamente gli errori nell&#39;esecuzione porta, per cui ci sono almeno due motivi: il primo over-digestione o la mancanza di precisione di taglio può portare a cancelli con troppe scheggiature o nick nelle posizioni sbagliate. In entrambi i casi, i gate sono più probabilità di partecipare a reazioni indesiderate. Tali problemi possono essere alleviati ottimizzando la quantità di enzima utilizzato (vedere Figura 4). In secondo luogo, in questi esperimenti, la maggior parte degli ingressi e trefoli ausiliari erano DNA sintetico e quindi contenevano delezioni e mutazioni. In linea di principio, tutti gli input a singolo filamento e fili supplementari potrebbero essere ottenuti anche dal DNA fagemide attraverso un enzima digestione intaccare del genoma virale M13 pre-codificato 26. Forse le prestazioni del circuito può essere ulteriormente migliorata utilizzando ssDNA derivata dal genoma batterico. Mentre è stato trovato l&#39;uso di porte plasmidi derivati ​​per migliorare le prestazioni del circuito, un&#39;analisidei costi e tempi di lavorazione rivelato che mentre la produzione di porte plasmide derivato è leggermente più economico (Tabella 15), richiede 2-3 volte più lungo tempo di lavorazione rispetto al montaggio e purificazione di porte da oligonucleotidi sintetizzati in commercio (Tabella 16). I costi primari di porte plasmide derivato sono sintesi genica e l&#39;impiego di enzimi di restrizione. Per 300 pmoli di cancelli (sufficienti per 15 reazioni 30 nm), il costo stimato per Iscriviti al cancello è di circa $ 170 e $ 200 per Forcella cancelli, la differenza di costo è dovuta all&#39;utilizzo di diversi enzimi intaccare. Al contrario, la sintesi chimica dei trefoli per gli stessi costi di gate intorno $ 260 compresa una commissione purificazione PAGE. Il costo orario principale per cancelli plasmide derivato è nella procedura di clonazione, che, come la sintesi del DNA, può essere affidata a una società di sintesi gene. Tuttavia, una volta assemblati, cancelli plasmide derivato hanno il vantaggio che i plasmidi ospitanti possono facilmente essere replicate unnd possono essere memorizzati in forma di scorte glicerolo batteriche. Ciò consente di riutilizzare le porte più volte. Guardando al futuro, il miglioramento delle prestazioni dei cancelli plasmide-derivato potrebbe consentire una gamma molto più ampia di dinamica dei comportamenti che sono stati sperimentalmente dimostrato finora con CRNS DNA. Ad esempio, di recente 47,48 lavoro teorico ha suggerito che i modelli spaziali autorganizzati alla macro-scala possono essere realizzate con DNA CRNS attraverso un meccanismo di diffusione di reazione. Il metodo qui presentato fornisce un percorso praticabile per costruire i componenti molecolari sottostanti per tali materiali DNA auto-patterning. Anche se impegnativo, lo sviluppo di morfologie macro-scala in modo programmabile avrebbe implicazioni significative in settori che vanno dalla ricerca biomateriali alla medicina rigenerativa.

La prevedibilità di Watson-Crick base di abbinamento è permesso nanotecnologia del DNA dinamico di emergere come un modo programmabile per la progettazione di dispositivi molecolari con proprietà dinamiche 1,2. In particolare, lo spostamento filamento di DNA - una reazione di ibridazione competitiva programmabile - ha dimostrato di essere un potente meccanismo di ingegneria dei sistemi dinamici di DNA. In una reazione spostamento filamento di DNA, un oligonucleotide arrivo sposta una ciocca precedentemente legato &quot;uscita&quot; da un partner di legame complementare. Molteplici tali reazioni possono essere concatenati in cascate di reazione multi-step con un alto grado di controllo sull&#39;ordine e la tempistica della reazione individuale passi 3. DNA cascate spostamento filone sono stati utilizzati per creare circuiti digitali e analogici molecolari 4-7, 8-10 nanostrutture commutabili, motori molecolari autonome 11-15, e non covalenti amplificatori catalitiche 13,16-21. Inoltre, DDispositivi NA utilizzando reazioni di spostamento dei filamenti possono essere simulati e progettati per diverse applicazioni utilizzando il software di progettazione assistita da computer 22-24. Attualmente, il DNA sintetizzato chimicamente serve come il materiale principale per le nanotecnologie del DNA. Tuttavia, gli errori nel processo di sintesi del DNA, e le conseguenti oligonucleotidi imperfetti, si ritiene che limitare le prestazioni dei dispositivi di Dynamic DNA, provocando reazioni collaterali errati. Ad esempio, reazioni &quot;fuga&quot; possono causare il rilascio di un oligonucleotide uscita anche in assenza di un trigger reazione. Tali effetti sono più evidenti in cascate di reazione autocatalitiche dove anche una minima quantità di perdita iniziale eventualmente sfociare nella piena attivazione della cascata 19,20. Viceversa, reazioni spesso non riescono a raggiungere il livello atteso di attivazione perché alcuni componenti non attivano anche in presenza dell&#39;ingresso previsto 7,25. Per rendere le prestazioni di DNA-basednanodispositivi paragonabili alle loro controparti a base di proteine ​​biologiche, tali modalità di errore devono essere drasticamente ridotto. Plasmidi batterici o altro DNA biologico potrebbe servire come fonte relativamente a buon mercato di DNA altamente puro per applicazioni nanotecnologiche. Grandi quantità di DNA possono essere generati dalla replica nei batteri e le capacità di correzione di bozze intrinseche dei sistemi viventi garantiscono la purezza del DNA risultante. In effetti, diversi lavori recenti hanno riconosciuto la potenziale utilità del DNA biologico per applicazioni nanotecnologiche 21,26-28. Tuttavia, la natura completamente a doppio filamento di DNA plasmide ha finora vietato l&#39;uso come materiale per la realizzazione di dispositivi di DNA dinamici, normalmente rappresentato più oligonucleotidi e contengono entrambi i domini doppio filamento e singolo filamento. In un recente lavoro 29 questo problema è stato affrontato e una nuova architettura porta DNA che consiste principalmente di intaccate DNA a doppia elica (ndsDNA) era introdurred. È importante sottolineare che i sistemi di porte ndsDNA possono essere progettati che realizzano le dinamiche specificato da una rete formale reazione chimica (CRN) 29. cancelli ndsDNA potrebbero quindi essere utilizzati, in linea di principio, di creare sistemi dinamici che presentano oscillazioni e il caos, bistabilità e la memoria, la logica booleana o comportamenti algoritmici 30-38. Ad esempio, Rif. ​​29 hanno dimostrato una CRN tre reazione che ha fornito un&#39;implementazione molecolare di un protocollo &quot;consenso&quot;, un tipo di algoritmo di calcolo distribuito 29,39,40. Questo primo lavoro ha dimostrato un nuovo uso per il formalismo CRN come un &quot;linguaggio di programmazione&quot; per la rapida sintesi di sistemi molecolari funzionali (Figura 1A). Qui, è previsto un protocollo dettagliato per ricavare porte ndsDNA dal plasmide DNA. Il primo è una revisione del processo di progettazione sequenza. Segue una spiegazione di oligonucleotidi sintetici contenenti comele sequenze del cancello vengono clonati in plasmidi e la sequenza verificate e amplificati tramite coltura batterica. Successivamente, è mostrato come ndsDNA porte possono essere derivati ​​da plasmidi di trattamento enzimatico (vedere Figura 2). Infine, un metodo per testare il comportamento cancello utilizzando saggi cinetici fluorescenza è delineato. Meccanismo di reazione Come esempio, il protocollo si concentra sulla reazione chimica catalitica A + B-&gt; B + C. Le specie A, B, e C (&quot;segnali&quot;, Figura 1B) tutti corrispondono ad una diversa molecola di DNA a singolo filamento. Le sequenze di queste molecole sono completamente indipendenti ed i fili non reagiscono uno con l&#39;altro direttamente. Le sequenze di tutti i segnali hanno due differenti domini funzionali, cioè sottosequenze che agiscono insieme a reazioni di spostamento strand: 1) un punto d&#39;appoggio a dominio breve (etichette ta, tb, tc) che viene utilizzato per l&#39;avvio di filo spostamento reaction, e 2) una lunga dominio (etichette a, b, c), che determina l&#39;identità del segnale. Le interazioni tra fili del segnale sono mediati da intaccate DNA (ndsDNA) complessi a doppia elica del cancello (chiamati Join AB e forcella aC) e ausiliari di specie a singolo filamento (&lt;tr r&gt;, &lt;b tr&gt;, &lt;c tb&gt; e &lt;i tc &gt;). La reazione A + B- formale&gt; B + C viene eseguito attraverso una serie di stadi di reazione di spostamento del filo, in cui ogni stadio di reazione espone un punto d&#39;appoggio per una successiva reazione (Figura 1B). In questo esempio, i segnali A e B sono inizialmente libere in soluzione mentre il segnale C è legato al cancello forcella. Al termine della reazione B e C sono in soluzione. Più in generale, i segnali che sono associati a un cancello sono inattive mentre i segnali che sono liberi in soluzione sono attivi, cioè, essi possono partecipare a una reazione di spostamento del filo comeun ingresso. Il decorso della reazione viene seguito mediante una strategia reporter fluorescente (Figura 1C). Nel precedente lavoro 29, è stato dimostrato che questo meccanismo di reazione realizza non solo la stechiometria corretta ma anche la cinetica della reazione di destinazione.

<table border="0">
	<tbody>
		<tr>
			<td>Phusion High-Fidelity PCR Master Mix with HF Buffer</td>
			<td>NEB</td>
			<td>M0531S</td>
			<td></td>
		</tr>
		<tr>
			<td>PvuII-HF</td>
			<td>NEB</td>
			<td>R3151L</td>
			<td></td>
		</tr>
		<tr>
			<td>PstI-HF</td>
			<td>NEB</td>
			<td>R3140S</td>
			<td></td>
		</tr>
		<tr>
			<td>Gibson Assembly Master Mix</td>
			<td>NEB</td>
			<td>E2611S</td>
			<td></td>
		</tr>
		<tr>
			<td>Terrific Broth, Modified</td>
			<td>SIGMA-ALDRICH</td>
			<td>T0918-250G</td>
			<td></td>
		</tr>
		<tr>
			<td>QIAprep Spin Miniprep Kit (250)</td>
			<td>QIAGEN</td>
			<td>27106</td>
			<td></td>
		</tr>
		<tr>
			<td>QIAGEN Hispeed Maxi-prep Kit</td>
			<td>QIAGEN</td>
			<td>12662</td>
			<td></td>
		</tr>
		<tr>
			<td>Nb.BsrDI</td>
			<td>NEB</td>
			<td>R0648L</td>
			<td></td>
		</tr>
		<tr>
			<td>Nt.BstNBI</td>
			<td>NEB</td>
			<td>R0607L</td>
			<td></td>
		</tr>
		<tr>
			<td>NanoDrop 2000c</td>
			<td>Thermo Scientific</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Double-stranded Genomic Blocks</td>
			<td>IDT</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Horiba Jobin-Yvon Spex Fluorolog-3 Fluorimeter</td>
			<td>Horiba/Jobin Yvon</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Synthetic Quartz Cells&#160;</td>
			<td>Starna</td>
			<td>23-5.45-S0G-5</td>
			<td></td>
		</tr>
		<tr>
			<td>QIAGEN Gel Extraction Kit</td>
			<td>QIAGEN</td>
			<td>28706</td>
			<td></td>
		</tr>
		<tr>
			<td>Plasmid Backbones</td>
			<td>BioBrick</td>
			<td>E0240-pSB1A2</td>
			<td>High copy number plasmid with Ampicillin resistance. Sequence can be found from http://parts.igem.org</td>
		</tr>
	</tbody>
</table>

plasmid-derived dna strand displacement gates for implementing chemical reaction networks

DNA nanotechnology requires large amounts of highly pure DNA as an engineering material. Plasmid DNA could meet this need since it is replicated with high fidelity, is readily amplified through bacterial culture and can be stored indefinitely in the form of bacterial glycerol stocks. However, the double-stranded nature of plasmid DNA has so far hindered its efficient use for construction of DNA nanostructures or devices that typically contain single-stranded or branched domains. In recent work, it was found that nicked double stranded DNA (ndsDNA) strand displacement gates could be sourced from plasmid DNA. The following is a protocol that details how these ndsDNA gates can be efficiently encoded in plasmids and can be derived from the plasmids through a small number of enzymatic processing steps. Also given is a protocol for testing ndsDNA gates using fluorescence kinetics measurements. NdsDNA gates can be used to implement arbitrary chemical reaction networks (CRNs) and thus provide a pathway towards the use of the CRN formalism as a prescriptive molecular programming language. To demonstrate this technology, a multi-step reaction cascade with catalytic kinetics is constructed. Further it is shown that plasmid-derived components perform better than identical components assembled from synthetic DNA.

Watch this Scientific Journal Video about Plasmid-derived DNA Strand Displacement Gates for Implementing Chemical Reaction Networks at JoVE.com

Plasmid-derived DNA Strand Displacement Gates for Implementing Chemical Reaction Networks

This protocol describes a method for deriving DNA strand displacement gates from plasmids and testing them using fluorescence kinetics measurements. Gates can be modularly composed into multi-component systems to approximate the behavior of formal chemical reaction networks (CRN), demonstrating a new use for CRNs as a molecular programming language.

Plasmidi derivati ​​da DNA Strand Displacement Cancelli per reti di reazione implementazione chimici

DNA nanotechnology requires large amounts of highly pure DNA as an engineering material. Plasmid DNA could meet this need since it is replicated with high ...

plasmid-derived-dna-strand-displacement-gates-for-implementing

Research

JoVE Journal

Biology

14.0K Views.  University of Washington. This protocol describes a method for deriving DNA strand displacement gates from plasmids and testing them using fluorescence kinetics measurements. Gates can be modularly composed into multi-component systems to approximate the behavior of formal chemical reaction networks (CRN), demonstrating a new use for CRNs as a molecular programming language. 

Video: Plasmid-derived DNA Strand Displacement Gates for Implementing Chemical Reaction Networks

Analysis of DNA Double-strand Break (DSB) Repair in Mammalian Cells

DNA double-strand breaks are the most dangerous DNA lesions that may lead to massive loss of genetic information and cell death. Cells repair DSBs using two major pathways: nonhomologous end joining (NHEJ) and homologous recombination (HR). Perturbations of NHEJ and HR are often associated with premature aging and tumorigenesis, hence it is important to have a quantitative way of measuring each DSB repair pathway. Our laboratory has developed fluorescent reporter constructs that allow sensitive and quantitative measurement of NHEJ and HR. The constructs are based on an engineered GFP gene containing recognition sites for a rare-cutting I-SceI endonuclease for induction of DSBs. The starting constructs are GFP negative as the GFP gene is inactivated by an additional exon, or by mutations. Successful repair of the I-SceI-induced breaks by NHEJ or HR restores the functional GFP gene. The number of GFP positive cells counted by flow cytometry provides quantitative measure of NHEJ or HR efficiency.

Analysis of DNA Double-strand Break DSB Repair in Mammalian Cells

This article describes GFP-based fluorescence in vivo assays that separately quantify homologous recombination and nonhomologous end joining in mammalian cells.

Analisi del DNA doppio filamento Break (DSB) di riparazione in cellule di mammifero

DNA double-strand breaks are the most dangerous DNA lesions that may lead to massive loss of genetic information and cell death.  Cells repair DSBs using ...

Ricerca

Biologia

How to Culture, Record and Stimulate Neuronal Networks on Micro-electrode Arrays (MEAs)

For the last century, many neuroscientists around the world have dedicated their lives to understanding how neuronal networks work and why they stop working in various diseases. Studies have included neuropathological observation, fluorescent microscopy with genetic labeling, and intracellular recording in both dissociated neurons and slice preparations. This protocol discusses another technology, which involves growing dissociated neuronal cultures on micro-electrode arrays (also called multi-electrode arrays, MEAs).
There are multiple advantages to using this system over other technologies. Dissociated neuronal cultures on MEAs provide a simplified model in which network activity can be manipulated with electrical stimulation sequences through the array's multiple electrodes. Because the network is small, the impact of stimulation is limited to observable areas, which is not the case in intact preparations. The cells grow in a monolayer making changes in morphology easy to monitor with various imaging techniques. Finally, cultures on MEAs can survive for over a year in vitro which removes any clear time limitations inherent with other culturing techniques.1
Our lab and others around the globe are utilizing this technology to ask important questions about neuronal networks. The purpose of this protocol is to provide the necessary information for setting up, caring for, recording from and electrically stimulating cultures on MEAs. In vitro networks provide a means for asking physiologically relevant questions at the network and cellular levels leading to a better understanding of brain function and dysfunction.

How to Culture, Record and Stimulate Neuronal Networks on Micro-electrode Arrays MEAs

This protocol provides the necessary information for setting up, caring for, recording from and electrically stimulating cultures on MEAs. In vitro networks provide a means for asking physiologically relevant questions at the network and cellular levels leading to a better understanding of brain function and dysfunction.

Come la cultura, record e stimolare reti neuronali sulla micro-array di elettrodi (MEA)

For the last century, many neuroscientists around the world have dedicated their lives to understanding how neuronal networks work and why they stop ...

Bioengineering Human Microvascular Networks in Immunodeficient Mice

The future of tissue engineering and cell-based therapies for tissue regeneration will likely rely on our ability to generate functional vascular networks in vivo. In this regard, the search for experimental models to build blood vessel networks in vivo is of utmost importance 1. The feasibility of bioengineering microvascular networks in vivo was first shown using human tissue-derived mature endothelial cells (ECs) 2-4; however, such autologous endothelial cells present problems for wide clinical use, because they are difficult to obtain in sufficient quantities and require harvesting from existing vasculature. These limitations have instigated the search for other sources of ECs. The identification of endothelial colony-forming cells (ECFCs) in blood presented an opportunity to non-invasively obtain ECs 5-7. We and other authors have shown that adult and cord blood-derived ECFCs have the capacity to form functional vascular networks in vivo 7-11. Importantly, these studies have also shown that to obtain stable and durable vascular networks, ECFCs require co-implantation with perivascular cells. The assay we describe here illustrates this concept: we show how human cord blood-derived ECFCs can be combined with bone marrow-derived mesenchymal stem cells (MSCs) as a single cell suspension in a collagen/fibronectin/fibrinogen gel to form a functional human vascular network within 7 days after implantation into an immunodeficient mouse. The presence of human ECFC-lined lumens containing host erythrocytes can be seen throughout the implants indicating not only the formation (de novo) of a vascular network, but also the development of functional anastomoses with the host circulatory system. This murine model of bioengineered human vascular network is ideally suited for studies on the cellular and molecular mechanisms of human vascular network formation and for the development of strategies to vascularize engineered tissues.

Here, we describe a methodology to deliver human cord blood-derived endothelial colony-forming cells (ECFCs) and bone marrow-derived mesenchymal stem cells (MSCs), embedded in a collagen/fibronectin gel, subcutaneously into immunodeficient mice. This cell/gel combination generates a human vascular network that connects with the mouse vasculature.

Bioingegneria reti umane in topi immunodeficienti microvascolari

The future of tissue engineering and cell-based therapies for tissue regeneration will likely rely on our ability to generate functional vascular networks ...

Iterative Optimization of DNA Duplexes for Crystallization of SeqA-DNA Complexes

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters within the origin of replication1. Beyond the origin, SeqA is found at the replication forks, where it organizes newly replicated DNA into higher ordered structures2. SeqA associates only weakly with single GATC sequences, but it forms high affinity complexes with DNA duplexes containing multiple GATC sites. The minimal functional and structural unit of SeqA is a dimer, thereby explaining the requirement of at least two GATC sequences to form a high-affinity complex with hemimethylated DNA3. Additionally, the SeqA architecture, with the oligomerization and DNA-binding domains separated by a flexible linker, allows binding to GATC repeats separated by up to three helical turns. Therefore, understanding the function of SeqA at a molecular level requires the structural analysis of SeqA bound to multiple GATC sequences. In protein-DNA crystallization, DNA can have none to an exceptional effect on the packing interactions depending on the relative sizes and architecture of the protein and the DNA. If the protein is larger than the DNA or footprints most of the DNA, the crystal packing is primarily mediated by protein-protein interactions. Conversely, when the protein is the same size or smaller than the DNA or it only covers a fraction of the DNA, DNA-DNA and DNA-protein interactions dominate crystal packing. Therefore, crystallization of protein-DNA complexes requires the systematic screening of DNA length4 and DNA ends (blunt or overhang)5-7. In this report, we describe how to design, optimize, purify and crystallize hemimethylated DNA duplexes containing tandem GATC repeats in complex with a dimeric variant of SeqA (SeqA&Delta;(41-59)-A25R) to obtain crystals suitable for structure determination.

Crystal structure of protein&#x2013;DNA complexes can provide insight into protein function, mechanism, as well as, the nature of the specific interaction. Here, we report how to optimize the length, sequence and ends of duplex DNA for co-crystallization with Escherichia coli SeqA, a negative regulator of replication initiation.

Ottimizzazione iterativa di duplex di DNA per cristallizzazione di Seqa-DNA Complessi

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters ...

Identification of Metabolically Active Bacteria in the Gut of the Generalist Spodoptera littoralis via DNA Stable Isotope Probing Using 13C-Glucose

Guts of most insects are inhabited by complex communities of symbiotic nonpathogenic bacteria. Within such microbial communities it is possible to identify commensal or mutualistic bacteria species. The latter ones, have been observed to serve multiple functions to the insect, i.e. helping in insect reproduction1, boosting the immune response2, pheromone production3, as well as nutrition, including the synthesis of essential amino acids4, among others. &#160; &#160;
Due to the importance of these associations, many efforts have been made to characterize the communities down to the individual members. However, most of these efforts were either based on cultivation methods or relied on the generation of 16S rRNA gene fragments which were sequenced for final identification. Unfortunately, these approaches only identified the bacterial species present in the gut and provided no information on the metabolic activity of the microorganisms.
To characterize the metabolically active bacterial species in the gut of an insect, we used stable isotope probing (SIP) in vivo employing 13C-glucose as a universal substrate. This is a promising culture-free technique that allows the linkage of microbial phylogenies to their particular metabolic activity. This is possible by tracking stable, isotope labeled atoms from substrates into microbial biomarkers, such as DNA and RNA5. The incorporation of 13C isotopes into DNA increases the density of the labeled DNA compared to the unlabeled (12C) one. In the end, the 13C-labeled DNA or RNA is separated by density-gradient ultracentrifugation from the 12C-unlabeled similar one6. Subsequent molecular analysis of the separated nucleic acid isotopomers provides the connection between metabolic activity and identity of the species.
Here, we present the protocol used to characterize the metabolically active bacteria in the gut of a generalist insect (our model system), Spodoptera littoralis (Lepidoptera, Noctuidae). The phylogenetic analysis of the DNA was done using pyrosequencing, which allowed high resolution and precision in the identification of insect gut bacterial community. As main substrate, 13C-labeled glucose was used in the experiments. The substrate was fed to the insects using an artificial diet.

Identification of Metabolically Active Bacteria in the Gut of the Generalist Spodoptera littoralis via DNA Stable Isotope Probing Using 13C-Glucose

The active bacterial community associated with the gut of Spodoptera littoralis, was determined by stable-isotope-probing (SIP) coupled to pyrosequencing. Using this methodology, identification of the metabolically active bacteria species within the community was done with high resolution and precision.

Identificazione dei batteri metabolicamente attivo nell&#39;intestino del generalista<em&gt; Spodoptera littoralis</em&gt; Via DNA isotopi stabili Probing Utilizzo<sup&gt; 13</sup&gt; C-glucosio

Guts of most insects are inhabited by complex communities of symbiotic nonpathogenic bacteria. Within such microbial communities it is possible to ...

Protocols for Implementing an Escherichia coli Based TX-TL Cell-Free Expression System for Synthetic Biology

Ideal cell-free expression systems can theoretically emulate an in vivo cellular environment in a controlled in vitro platform.1 This is useful for expressing proteins and genetic circuits in a controlled manner as well as for providing a prototyping environment for synthetic biology.2,3 To achieve the latter goal, cell-free expression systems that preserve endogenous Escherichia coli transcription-translation mechanisms are able to more accurately reflect in vivo cellular dynamics than those based on T7 RNA polymerase transcription. We describe the preparation and execution of an efficient endogenous E. coli based transcription-translation (TX-TL) cell-free expression system that can produce equivalent amounts of protein as T7-based systems at a 98% cost reduction to similar commercial systems.4,5 The preparation of buffers and crude cell extract are described, as well as the execution of a three tube TX-TL reaction. The entire protocol takes five days to prepare and yields enough material for up to 3000 single reactions in one preparation. Once prepared, each reaction takes under 8 hr from setup to data collection and analysis. Mechanisms of regulation and transcription exogenous to E. coli, such as lac/tet repressors and T7 RNA polymerase, can be supplemented.6 Endogenous properties, such as mRNA and DNA degradation rates, can also be adjusted.7 The TX-TL cell-free expression system has been demonstrated for large-scale circuit assembly, exploring biological phenomena, and expression of proteins under both T7- and endogenous promoters.6,8 Accompanying mathematical models are available.9,10 The resulting system has unique applications in synthetic biology as a prototyping environment, or "TX-TL biomolecular breadboard."

Protocols for Implementing an Escherichia coli Based TX-TL Cell-Free Expression System for Synthetic Biology

This five-day protocol outlines all steps, equipment, and supplemental software necessary for creating and running an efficient endogenous Escherichia coli based TX-TL cell-free expression system from scratch. With reagents, the protocol takes 8 hours or less to setup a reaction, collect, and process data.

Protocolli per l&#39;implementazione di un<em&gt; Escherichia coli</em&gt; Sulla base TX-TL cellulare-Free Expression System per la biologia sintetica

Ideal cell-free expression systems can theoretically emulate an in vivo cellular environment in a controlled in vitro platform.1 This is useful for ...

Real-time Imaging of Single Engineered RNA Transcripts in Living Cells Using Ratiometric Bimolecular Beacons

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the development of diverse techniques to visualize individual RNA transcripts in single living cells. One promising technique that has recently been described utilizes an oligonucleotide-based optical probe, ratiometric bimolecular beacon (RBMB), to detect RNA transcripts that were engineered to contain at least four tandem repeats of the RBMB target sequence in the 3&#8217;-untranslated region. RBMBs are specifically designed to emit a bright fluorescent signal upon hybridization to complementary RNA, but otherwise remain quenched. The use of a synthetic probe in this approach allows photostable, red-shifted, and highly emissive organic dyes to be used for imaging. Binding of multiple RBMBs to the engineered RNA transcripts results in discrete fluorescence spots when viewed under a wide-field fluorescent microscope. Consequently, the movement of individual RNA transcripts can be readily visualized in real-time by taking a time series of fluorescent images. Here we describe the preparation and purification of RBMBs, delivery into cells by microporation and live-cell imaging of single RNA transcripts.

Ratiometric bimolecular beacons (RBMBs) can be used to image single engineered RNA transcripts in living cells. Here, we describe the preparation and purification of RBMBs, delivery of RBMBs into cells by microporation and fluorescent imaging of single RNA transcripts in real-time.

In tempo reale Imaging del singolo Engineered RNA trascritti in cellule viventi Utilizzando Ratiometric bimolecolari Beacons

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the ...

Reduced-gravity Environment Hardware Demonstrations of a Prototype Miniaturized Flow Cytometer and Companion Microfluidic Mixing Technology

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If humans are to travel beyond low Earth orbit, a transition towards space-ready, point-of-care (POC) testing is required. Such testing needs to be comprehensive, easy to perform in a reduced-gravity environment, and unaffected by the stresses of launch and spaceflight. Countless POC devices have been developed to mimic laboratory scale counterparts, but most have narrow applications and few have demonstrable use in an in-flight, reduced-gravity environment. In fact, demonstrations of biomedical diagnostics in reduced gravity are limited altogether, making component choice and certain logistical challenges difficult to approach when seeking to test new technology. To help fill the void, we are presenting a modular method for the construction and operation of a prototype blood diagnostic device and its associated parabolic flight test rig that meet the standards for flight-testing onboard a parabolic flight, reduced-gravity aircraft. The method first focuses on rig assembly for in-flight, reduced-gravity testing of a flow cytometer and a companion microfluidic mixing chip. Components are adaptable to other designs and some custom components, such as a microvolume sample loader and the micromixer may be of particular interest. The method then shifts focus to flight preparation, by offering guidelines and suggestions to prepare for a successful flight test with regard to user training, development of a standard operating procedure (SOP), and other issues. Finally, in-flight experimental procedures specific to our demonstrations are described.

Spaceflight blood diagnostics need innovation. Few demonstrations have been published illustrating in-flight, reduced-gravity health diagnostic technology. Here we present a method for construction and operation of a parabolic flight test rig for a prototype point-of-care flow-cytometry design, with components and preparation strategies adaptable to other setups.

Ridotto gravità ambiente hardware Dimostrazioni di un prototipo miniaturizzato Citofluorimetro e Companion Microfluidic tecnologia di miscelazione

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If ...

Selected Reaction Monitoring Mass Spectrometry for Absolute Protein Quantification

Absolute quantification of target proteins within complex biological samples is critical to a wide range of research and clinical applications. This protocol provides step-by-step instructions for the development and application of quantitative assays using selected reaction monitoring (SRM) mass spectrometry (MS). First, likely quantotypic target peptides are identified based on numerous criteria. This includes identifying proteotypic peptides, avoiding sites of posttranslational modification, and analyzing the uniqueness of the target peptide to the target protein. Next, crude external peptide standards are synthesized and used to develop SRM assays, and the resulting assays are used to perform qualitative analyses of the biological samples. Finally, purified, quantified, heavy isotope labeled internal peptide standards are prepared and used to perform isotope dilution series SRM assays. Analysis of all of the resulting MS data is presented. This protocol was used to accurately assay the absolute abundance of proteins of the chemotaxis signaling pathway within RAW 264.7 cells (a mouse monocyte/macrophage cell line). The quantification of Gi2 (a heterotrimeric G-protein &#945;-subunit) is described in detail.

This protocol describes how to perform absolute quantification assays of target proteins within complex biological samples using selected reaction monitoring. It was used to accurately quantify proteins of the mouse macrophage chemotaxis signaling pathway. Target peptide selection, assay development, and qualitative and quantitative assays are described in detail.

Reazione selezionato Monitoraggio spettrometria di massa per Absolute Protein Quantificazione

Absolute quantification of target proteins within complex biological samples is critical to a wide range of research and clinical applications. This ...

In Vivo Alkaline Comet Assay and Enzyme-modified Alkaline Comet Assay for Measuring DNA Strand Breaks and Oxidative DNA Damage in Rat Liver

Unrepaired DNA damage can lead to genetic instability, which in turn may enhance cancer development. Therefore, identifying potential DNA damaging agents is important for protecting public health. The in vivo alkaline comet assay, which detects DNA damage as strand breaks, is especially relevant for assessing the genotoxic hazards of xenobiotics, as its responses reflect the in vivo absorption, tissue distribution, metabolism and excretion (ADME) of chemicals, as well as DNA repair process. Compared to other in vivo DNA damage assays, the assay is rapid, sensitive, visual and inexpensive, and, by converting oxidative DNA damage into strand breaks using specific repair enzymes, the assay can measure oxidative DNA damage in an efficient and relatively artifact-free manner. Measurement of DNA damage with the comet assay can be performed using both acute and subchronic toxicology study designs, and by integrating the comet assay with other toxicological assessments, the assay addresses animal welfare requirements by making maximum use of animal resources. Another major advantage of the assays is that they only require a small amount of cells, and the cells do not have to be derived from proliferating cell populations. The assays also can be performed with a variety of human samples obtained from clinically or occupationally exposed individuals.

In Vivo Alkaline Comet Assay and Enzyme-modified Alkaline Comet Assay for Measuring DNA Strand Breaks and Oxidative DNA Damage in Rat Liver

The alkaline comet assay measures DNA strand breaks in eukaryotic cells. By adding an Endonuclease III or human 8-oxoguanine-DNA-N-glycosylase digestion step, the assay can efficiently detect oxidative DNA damage. We describe methods for using these assays to detect DNA damage in rat liver.

In Vivo alcalina Comet Assay e l&#39;enzima modificato alcalina Comet Assay per la misurazione rotture del DNA Strand e danno ossidativo del DNA in fegato di ratto

Unrepaired DNA damage can lead to genetic instability, which in turn may enhance cancer development. Therefore, identifying potential DNA damaging agents ...

Plasmidi derivati ​​da DNA Strand Displacement Cancelli per reti di reazione implementazione chimici

Plasmidi derivati da DNA Strand Displacement Cancelli per reti di reazione implementazione chimici