preparation-photoacoustic-analysis-cellular-vehicles-containing-gold

Preparation and Photoacoustic Analysis of Cellular Vehicles Containing Gold Nanorods

Gold nanorods are attractive for a range of biomedical applications, such as the photothermal ablation and the photoacoustic imaging of cancer, thanks to ...

Italian National Research Council

Photocoercivity of nano-stabilized Au: Fe superparamagnetic nanoparticles.

A systematic optical study, including micro, ensemble and time resolved photoluminescence of GaAs/AlGaAs triple concentric quantum rings, self-assembled via droplet epitaxy, is presented. Clear emission from localized states belonging to the ring structures is reported. The triple rings show a fast decay dynamics, around 40 ps, which is expected to be useful for ultrafast optical switching applications.

Micro-photoluminescence of GaAs/AlGaAs triple concentric quantum rings.

We report new advancements in the biomedical exploitation of plasmonic nanoparticles as an effective platform for the photothermal repair of biological tissue. Chitosan films are loaded with gold nanorods with intense optical absorption in the "therapeutic window" of deepest light penetration through the body, and then activated by near infrared laser excitation to give adhesion with adjacent connective tissues. The adhesion consists of 0.07 mm(2) welds of ~20 kPa tensile strength at the film/tissue interface, which are obtained by administration of pulses with duration in the hundreds of millisecond timescale from a diode laser at ~130 J cm(-2). We investigate the adhesive effect as a function of pulse power and duration and identify an optimal operative window to achieve effective and reproducible welds with minimal detrimental superheating. These results may prove valuable to standardize laser bonding techniques and meet current needs for new knowledge which is urged by the penetration of nanotechnology into biomedical optics.

Hybrid nanocomposite films for laser-activated tissue bonding.

Graphene has recently emerged as a novel material in the biomedical field owing to its optical properties, biocompatibility, large specific surface area and low cost. In this paper, we provide the first demonstration of the possibility of using light to remotely trigger the release of drugs from graphene in a highly controlled manner. Different drugs including chemotherapeutics and proteins are firmly adsorbed onto reduced graphene oxide (rGO) nanosheets dispersed in a biopolymer film and then released by individual millisecond-long light pulses generated by a near infrared (NIR) laser. Here graphene plays the dual role of a versatile substrate for temporary storage of drugs and an effective transducer of NIR-light into heat. Drug release appears to be narrowly confined within the size of the laser spot under noninvasive conditions and can be precisely dosed depending on the number of pulses. The approach proposed paves the way for tailor-made pharmacological treatments of chronic diseases, including cancer, anaemia and diabetes.

Graphene as a photothermal switch for controlled drug release.

Photoacoustic imaging is an emerging technique. Although commercially available photoacoustic imaging systems currently exist, the technology is still in its infancy. Therefore, the design of stable phantoms is essential to achieve semiquantitative evaluation of the performance of a photoacoustic system and can help optimize the properties of contrast agents. We designed and developed a polydimethylsiloxane (PDMS) phantom with exceptionally fine geometry; the phantom was tested using photoacoustic experiments loaded with the standard indocyanine green dye and compared to an agar phantom pattern through polyethylene glycol-gold nanorods. The linearity of the photoacoustic signal with the nanoparticle number was assessed. The signal-tonoiseratio and contrast were employed as image quality parameters, and enhancements of up to 50 and up to 300%, respectively, were measured with the PDMS phantom with respect to the agar one. A tissue-mimicking (TM)-PDMS was prepared by adding TiO2 and India ink; photoacoustic tests were performed in order to compare the signal generated by the TM-PDMS and the biological tissue. The PDMS phantom can become a particularly promising tool in the field of photoacoustics for the evaluation of the performance of a PA system and as a model of the structure of vascularized soft tissues.

Lucia Cavigli

Institute of Applied Physics

Italian National Research Council

Preparation and Photoacoustic Analysis of Cellular Vehicles Containing Gold Nanorods

Lucia Cavigli

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Institute of Applied Physics

Italian National Research Council

Preparation and Photoacoustic Analysis of Cellular Vehicles Containing Gold Nanorods

Institute of Applied Physics