growth-gold-dendritic-nanoforests-on-titanium-nitride-coated-silicon

Growth of Gold Dendritic Nanoforests on Titanium Nitride-coated Silicon Substrates

In this study, a high-power impulse magnetron sputtering system is used to coat a flat and firm titanium nitride (TiN) film on silicon (Si) wafers, and a ...

National Applied Research Laboratories

In this paper, a facile two-step Galvanic replacement reaction (GRR) is proposed to prepare Pt-Ag tubular dendritic nano-forests (tDNFs) in ambient condition for enhancing methanol oxidation reaction (MOR) under solar illumination. In the first GRR, a homogeneous layer of silver dendritic nano-forests (DNFs) with 10 μm in thickness was grown on Si wafer in 5 min in silver nitride (AgNO3) and buffer oxide etchant (BOE) solution. In the second GRR, we utilized chloroplatinic acid (H2PtCl6) as the precursor for platinum (Pt) deposition to further transform the prepared Ag DNFs into Pt-Ag tDNFs. The catalytic performance and solar response of the Pt-Ag tDNFs toward methanol electro-oxidation are also studied by cyclic voltammetry (CV) and chronoamperometry (CA). The methanol oxidation current was boosted by 6.4% under solar illumination on the Pt-Ag tDNFs due to the induced localized surface plasmon resonance (LSPR) on the dendritic structure. Current results provide a cost-effective and facile approach to prepare solar-driven metallic electrodes potentially applicable to photo-electro-chemical fuel cells.

A facile approach to prepare silicon-based Pt-Ag tubular dendritic nano-forests (tDNFs) for solar-light-enhanced methanol oxidation reaction.

In this study, we propose an ultra-facile approach to prepare a platinum silicide nanoparticle-modified tip apex (PSM tip) used for scanning Kelvin probe microscopy (SKPM). We combined a localized fluoride-assisted galvanic replacement reaction (LFAGRR) and atmospheric microwave annealing (AMA) to deposit a single platinum silicide nanoparticle with a diameter of 32 nm on the apex of a bare silicon tip of atomic force microscopy (AFM). The total process was completed in an ambient environment in less than 3 min. The improved potential resolution in the SKPM measurement was verified. Moreover, the resolution of the topography is comparable to that of a bare silicon tip. In addition, the negative charges found on the PSM tips suggest the possibility of exploring the use of current PSM tips to sense electric fields more precisely. The ultra-fast and cost-effective preparation of the PSM tips provides a new direction for the preparation of functional tips for scanning probe microscopy. 

Facile Preparation of a Platinum Silicide Nanoparticle-Modified Tip Apex for Scanning Kelvin Probe Microscopy.

In this study, gold dendritic nanoforests (Au DNFs)-titanium nitride (TiN) composite was firstly proposed for visible-light photodegradation of pollutants. A high-power impulse magnetron sputtering system was used to coat TiN films on silicon wafers, and a fluoride-assisted galvanic replacement reaction was applied to deposit Au DNFs on TiN/Si substrates. Scanning electron microscope images and X-ray diffraction patterns of TiN/Si, Au DNFs/Si, and Au DNFs/TiN/Si samples verified that this synthesis process was accurately controlled. The average reflectance of Au DNFs/Si and Au DNFs/TiN/Si considerably declined to approximately 10%, because the broadband localized surface plasmon resonances of Au DNFs cause broadband absorbance and low reflectance. In photocatalytic performance, 90.66 &plusmn; 1.41% 4-nitrophenol was successfully degraded in 180 min by Au DNFs/TiN/Si under visible-light irradiation. Therefore, Au DNFs/TiN/Si has the chance to be a visible-light photocatalyst for photodegradation of pollutants.

Ming-Hua Shiao

Taiwan Instrument Research Institute

National Applied Research Laboratories

Growth of Gold Dendritic Nanoforests on Titanium Nitride-coated Silicon Substrates