This work was supported in part by a Natural Sciences and Engineering Research Council of Canada Discovery Grant, the INNOVAIT program, Cumming Medical Research Fund, Canada Foundation for Innovation (Project 36703), Hotchkiss Brain Institute CAPRI Grant, and Parkinson Association of Alberta Funding. GBP acknowledges support from the Canadian Institutes for Health Research (FDN-143290) and the Campus Alberta Innovates Chair Program.

All methods involving the use of human subjects were performed in compliance with the Tri-Council Ethical Conduct for Research Involving Humans, and the protocol was approved by the Conjoint Health Research Ethics Board (CHREB) at the University of Calgary. All subjects provided informed written consent before participation. Human participants were required to be healthy, right-handed adults between ages 18 and 40 willing and able to complete a magnetic resonance imaging (MRI) scan. Exclusion criteria included family his...

High-Precision TUS: Planning and Execution with Acoustic and Thermal Simulations

The authors have no conflicts of interest to declare.

In this method, subject-specific simulations are performed to predict and assess possible thermal and mechanical effects resulting from TUS application to the brain. Data sets between participants must remain separate and carefully documented, as using an incorrect scan or data file will lead to inaccurate simulations. When numerous participant scans are collected, and planning is performed together, it is important to ensure proper labeling of images and folders and proceed with caution when sorting and saving files.</p...

Commonly used non-invasive neurostimulation techniques include transcranial direct current stimulation (tDCS) and transcranial magnetic stimulation (TMS). However, both have limited penetration depth and low precision1,2. By contrast, transcranial ultrasound (TUS) is an emerging non-invasive technique capable of enhancing or suppressing neuronal activity3,4,5 and targeting cortical or subcortical structures at millimeter precision6,7. Animal models using rodents4,8,9, rabbits10, sheep5,11, swine6, and nonhuman primates7,12,13,14 have shown the efficacy and safety of TUS. Studies have demonstrated that targeting various brain regions can elicit limb movements8 in rats, somatosensory evoked potentials (SSEPs) in swine6, and changes in visuomotor activity12, cognitive, and motivational decision-making in nonhuman primates13 among other changes in behavior. In humans, TUS has been observed to change motor evoked potentials (MEPs)&#160;and performance on a reaction time task when targeting the primary motor cortex15,16 and altered performance on a tactile discrimination task and SSEPs when targeting the somatosensory cortex17 and sensory thalamus18. Histological analyses have revealed no gross or microscopic structural changes associated with TUS in swine6, sheep5,11, rabbits10, and nonhuman primates14, and no side effects have been seen that significantly differ from other non-invasive neurostimulation techniques19.
TUS uses pulsed low-intensity focused ultrasound at a frequency between 200 kHz and 700 kHz to produce a transient neuromodulatory effect. The typical spatial-peak pulse-average intensity (Isppa) in situ is 10 W/cm2 or less, with reported duty cycles (percentage of time when ultrasound is on) ranging from 0.5% to 70% in humans20,21,22,23,24. Although the mechanisms of TUS neuromodulation have been proposed to mainly involve mechanical agitation of lipid membranes leading to the opening of ion channels25,26,27, possible thermal and cavitation effects cannot be ignored. They are assessed through mechanical (MI) and thermal (TI) indices. The MI describes the predicted cavitation-related bioeffects that will occur with TUS, whereas the TI describes the potential temperature increase within tissues following ultrasound application28,29. Furthermore, changing the frequency and input intensity also causes the MI and TI to change. Higher frequencies have better spatial resolution and decrease the probability of mechanical bio-effects; however, they have stronger absorption in the tissue, which increases the potential for temperature rise28. Alternatively, lower frequencies at the same intensity increase the MI. Similarly, increasing the intensity tends to increase the magnitude of mechanical and thermal bio-effects30. It is, therefore, imperative that careful planning and simulation be performed before experimentation sessions for all TUS parameters that will be implemented.
Planning a TUS experiment requires the identification of the target and trajectory of interest and the performance of thermal and acoustic simulations. Simulations assist in optimizing mechanical effects and mitigating the thermal effects of TUS on tissues. They require understanding the prediction of skull heating, pressure amplitude of the ultrasound at the focal point, focal correction, and other heating within the skull and skin. Adequate simulation ensures the focal point will reach the target of interest and safety parameters for ultrasound use set out by the safety guidelines on biophysical safety as recommended by the International Transcranial Ultrasonic Stimulation Safety and Standards Consortium (ITRUSST)31, which are based on FDA and Health Canada recommendations, are followed. Recent studies have also highlighted an auditory confounding effect accompanied by TUS32,33,34 in animals and humans, whereby TUS stimulation can activate auditory pathways in the brain to elicit responses32,33,34. Transection of the auditory nerves32, removal of cochlear fluid32, or chemical deafness33 in rodents have been employed to diminish these effects in animals. In humans, administering an auditory tone through headphones has been used to effectively mask auditory noise from TUS, controlling for the TUS-induced auditory activity confound34. This highlights the need to control for auditory noise in sham stimulation conditions, which must be incorporated into protocol planning, design, and implementation.
Here, we present a guide on how to appropriately complete the preparation (step 1, step 2), planning (step 3), simulations (step 4), and TUS delivery (step 5) required to perform TUS neuromodulation experiment in humans.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>128-channel amplifier unit</td>
			<td>Image Guided Therapy</td>
			<td></td>
			<td>This unit drives the H-317 transducer</td>
		</tr>
		<tr>
			<td>24-channel head coil</td>
			<td>General Electric</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>3D printer</td>
			<td>Raise3D</td>
			<td>Pro2</td>
			<td>Filament thickness of 1.75mm.</td>
		</tr>
		<tr>
			<td>3T MRI scanner</td>
			<td>General Electric</td>
			<td>Discovery 750 HD</td>
			<td>MR Console version DV26.0_R05_2008</td>
		</tr>
		<tr>
			<td>BabelBrain</td>
			<td>Samuel Pichardo (University of Calgary)</td>
			<td>Version 0.3.0</td>
			<td>Accessible at https://github.com/ProteusMRIgHIFU/BabelBrain. Executes thermal and acoustic simulations.</td>
		</tr>
		<tr>
			<td>Blender</td>
			<td>Blender Foundation</td>
			<td>Version 3.4.1</td>
			<td>Accessible at https://www.blender.org. Blender is called automatically by BabelBrain.</td>
		</tr>
		<tr>
			<td>Brainsight</td>
			<td>Rogue Research</td>
			<td>Version 2.5.2</td>
			<td>Used for target identification, trajectory planning, and execution of TUS delivery sessions.</td>
		</tr>
		<tr>
			<td>Chair and chin/head holder</td>
			<td>Rogue Research</td>
			<td></td>
			<td>To be used during TUS delivery session to ensure stability of participant&#8217;s head for optimized targeting.</td>
		</tr>
		<tr>
			<td>Custom-made coupling cone</td>
			<td>University of Calgary team</td>
			<td></td>
			<td>3D printed cone in acrylonitrile butadiene styrene (ABS), only required for H-317 transducer.</td>
		</tr>
		<tr>
			<td>dcm2niix</td>
			<td>Chris Rorden (University of South Carolina)&#160;</td>
			<td>Version 1.0.20220720</td>
			<td>Accessible at https://github.com/rordenlab/dcm2niix/releases. Used for pre-processing subject MR images.</td>
		</tr>
		<tr>
			<td>Fiducials and headband or glasses</td>
			<td>Brainsight, Rogue Research&#160;</td>
			<td>ST-1325 (subject tracker), LCT-583 (large coil tracker)</td>
			<td>Headband or glasses can be interchangeably used.</td>
		</tr>
		<tr>
			<td>Headphones</td>
			<td>Beats</td>
			<td>Fit Pro True Wireless Earbuds</td>
			<td>Wireless Bluetooth earbuds with disposable tips.</td>
		</tr>
		<tr>
			<td>MacBookPro</td>
			<td>Apple</td>
			<td>M2 Max, 16&#8221;, 64GB RAM</td>
			<td>Computer for completing trajectory planning and simulations</td>
		</tr>
		<tr>
			<td>SimNIBS</td>
			<td>Axel Thielscher (Technical University of Denmark)</td>
			<td>Version 4.0.0</td>
			<td>Accessible at https://simnibs.github.io/simnibs/build/html.index.html</td>
		</tr>
		<tr>
			<td>Syringe(s)</td>
			<td></td>
			<td>10 mL, 60 mL</td>
			<td>Used to add additional ultrasound gel to fill air pockets.</td>
		</tr>
		<tr>
			<td>Transducer</td>
			<td>Sonicconcepts</td>
			<td>H-317</td>
			<td>Other supported transducers include CTX_500 (NeuroFUS, Sonicconcepts), Single element, H-246 (Sonicconcepts), and Bsonix (Brainsonix)</td>
		</tr>
		<tr>
			<td>Transducer film</td>
			<td>Sonicconcepts</td>
			<td>Polyurethane membrane</td>
			<td>Interface between transducer and the subject</td>
		</tr>
		<tr>
			<td>Ultrasound gel</td>
			<td>Wavelength</td>
			<td>Clear Ultrasound Gel</td>
			<td>Coupling medium.</td>
		</tr>
		<tr>
			<td>Windows Laptop</td>
			<td>Acer</td>
			<td>Aspire A717-71G, Intel Core i7-7700HQ, 16 GB RAM</td>
			<td>System used to control 128-channel amplifier and generate sound through the headphones</td>
		</tr>
	</tbody>
</table>

pipeline for planning and execution of transcranial ultrasound neuromodulation experiments in humans

Transcranial ultrasound stimulation (TUS) is an emerging non-invasive neuromodulation technique capable of manipulating both cortical and subcortical structures with high precision. Conducting experiments involving humans necessitates careful planning of acoustic and thermal simulations. This planning is essential to adjust for bone interference with the ultrasound beam's shape and trajectory and to ensure TUS parameters meet safety requirements. T1- and T2-weighted, along with zero-time echo (ZTE) magnetic resonance imaging (MRI) scans with 1 mm isotropic resolution, are acquired (alternatively computed tomography x-ray (CT) scans) for skull reconstruction and simulations. Target and trajectory mapping are performed using a neuronavigational platform. SimNIBS is used for the initial segmentation of the skull, skin, and brain tissues. Simulation of TUS is carried over with the BabelBrain tool, which uses the ZTE scan to produce synthetic CT images of the skull to be converted into acoustic properties. We use a phased array ultrasound transducer with electrical steering capabilities. Z-steering is adjusted to ensure that the target depth is reached. Other transducer configurations are also supported in the planning tool. Thermal simulations are run to ensure temperature and mechanical index requirements are within the acoustic guidelines for TUS in human subjects as recommended by the FDA. During TUS delivery sessions, a mechanical arm assists in the movement of the transducer to the required location using a frameless stereotactic localization system.

Author Spotlight: Advancing Human Brain Modulation &amp;#8211; Optimized Protocols for Transcranial Ultrasound Stimulation Experiments

Pipeline for Planning and Execution of Transcranial Ultrasound Neuromodulation Experiments in Humans

Our research aims to understand the details of transcranial ultrasound stimulation to cause measurable effects in humans, including parameter specifications and its ability to modulate deep brain structures. Our protocol streamlines the planning steps required to complete transcranial ultrasound stimulation experiments in humans. It is efficient, easy to use, and involves using open source accessible planning tools.Our recent findings have shed light on the effect of optimal parameter selection in transcranial ultrasound stimulation to achieve neuronal inhibition. This will help in developing and designing future experiments in humans, significantly contributing to our understanding and advancement of this technology.

Figure 7&#160;illustrates comparative session samples from one of our studies42, featuring two distinct participants employing specific ultrasound parameters (fundamental frequency of 250 kHz, sonication duration of 120 s, a pulse repetition frequency (PRF) of 100 Hz, a duty cycle of 10%, and an ISPPA of 5 W/cm&#178;). In this research, T1-, T2-w, and ZTE MRI scans with 1 mm isotropic resolution were obtained from neurologically healthy subjects. TMS target...

Transcranial ultrasound stimulation (TUS) is an emerging non-invasive neuromodulation technique that requires careful planning of acoustic and thermal simulations. The methodology describes an image processing and ultrasound simulation pipeline for efficient, user-friendly, streamlined planning for human TUS experimentation.

Transcranial ultrasound stimulation (TUS) is an emerging non-invasive neuromodulation technique capable of manipulating both cortical and subcortical ...

pipeline-for-planning-execution-transcranial-ultrasound

Research

JoVE Journal

Neuroscience

Image Processing and Ultrasound Simulation Pipeline for Human Transcranial Ultrasound Neuromodulation Experimentation

After performing the high-resolution magnetic resonance imaging, convert T1 weighted, T2 weighted, and zero time echo DICOM scan files from DICOM to NIfTI format using the dcm2niix tool. Using SimNIBS Charm tool, execute co-registration and tissue mask extraction. Next, open Brainsight.Click on New Empty Project, and load the participant's T1 weighted NIfTI image. Click on the Reconstructions tab, then on the New Reconstruction dropdown menu. Click on Skin, followed by Compute Skin in the new window.Once complete, click on the Close button in the top left corner of the window. Within the Reconstructions tab, click on the New Reconstruction dropdown menu, followed by Full Brain Curvilinear. Now adjust the position of the green box on the sagittal, coronal, and transverse planes by dragging its edges to tightly surround the brain.Scroll through all the slices to ensure no tissue edges overlap. Click on Compute Curvilinear, and adjust the peel depth to four millimeters. Then click on the Landmarks tab on Brainsight, followed by Configure Landmarks.Place the crosshairs on the tip of the nose, and in the name field, label the landmark Nose. Then place the crosshairs between the eyes above the bridge of the nose, and label the landmark Nasion. Next, place the crosshairs on the left ear, and label the landmark L Ear.Then place the crosshairs on the right ear, and label the landmark R Ear. Afterward, click on the Targets tab, followed by Configure Targets. Place the crosshairs on the location of the desired target, and use the angle toggles on the right side of the screen to set the trajectory angle.Once the desired target and trajectory are selected, click on the new dropdown menu and choose Trajectory. To name the target, type into the text box next to name. Click on Export to export the target, and save it in the appropriate subject folder.Open BabelBrain, and select the required files for acoustic and thermal simulations. To select the text file previously exported from Brainsite, click on Select Trajectory, and choose the appropriate participant file. Click on select SimNIBS, to choose the SimNIBS file created earlier.Click on Select T1W, and choose the T1 weighted image produced and used previously for target and trajectory mapping. Now choose Real CT for CT scans, CTE for CTE scans, or no to use a simplified mask generated by the Charm tool. When using a CT or CTE image, click on the Coreg dropdown menu, followed by CT to MR.Click on Select, and choose the corresponding image from the appropriate participant file.Click Select Thermal Profile, and choose the thermal profile file that describes the experiment sonication parameters in terms of duration on, duration off, and duty cycle. Then click on the dropdown menu beside Transducer, and select the transducer used for experimentation. Click on the dropdown menu beside computing backend, and choose the computing backend of the computer running the simulations.Once all information is entered, click on Continue to complete the rest of the simulations. Now select the transducer's ultrasound frequency, and the appropriate points per wavelength. Click on Calculate Planning Mask.Inspect the image to ensure the bounds for the skin, skull, and brain were accurately recognized. For acoustic simulation, click on the Step 2 AC Sim tab to open. Adjust the distance from the cone to the focal spot by typing in the appropriate distance.To execute the simulation, click on the Calculate Fields button. Adjust the ZSteering value so the crosshairs are in the center of the focal point. Press the up or down arrows or manually enter the required value.Then click on Calculate Fields. For thermal simulation, click on the Step 3 Thermal Sim tab, then click on Calculate Thermal Fields.

Performing Transcranial Ultrasound Neuromodulation Experiment in Humans

After performing the skull reconstruction and simulations using the acquired MRI scans, open Brainsight and click on Open Existing Project. Select the Brainsight file created and saved during trajectory and target mapping. Click on Sessions to begin a new experimentation session.Click on the dropdown and select New, followed by Online Session. Then, click on the target name followed by Add a Next Step to add the target to the experiment session and continue to the experimentation window. Click on Window and Tool Calibration.Select the tools to be used and then click Recalibrate. Attach the subject tracker to the participant's head using a headband placed above the ears and eyebrows. Next, click on the registration tab in Brainsight.Place the pointer on the first landmark, stabilizing it with both hands. Then click on Sample and go to next landmark. Click on the Validation tab to validate the participant registration.Lightly place the pointer on various positions along the scalp and ensure all points are less than three millimeters. Then secure the participant's head with the chin rest and stabilizer placed on the back of the head to prevent movement. Ensure they are seated comfortably in the chair for the duration of the experiment.Click on Perform. Use the mechanical arm to position the transducer over the target of interest along the selected trajectory.

558 Views.  University of Calgary.  Transcranial ultrasound stimulation (TUS) is an emerging non-invasive neuromodulation technique that requires careful planning of acoustic and thermal simulations. The methodology describes an image processing and ultrasound simulation pipeline for efficient, user-friendly, streamlined planning for human TUS experimentation.

High-Precision TUS: Planning and Execution with Acoustic and Thermal Simulations

Summary