Nodal analysis is a fundamental method in electrical engineering used to simplify the process of circuit analysis. This method revolves around the concept of using node voltages as the primary variables for circuit analysis. The objective is to determine the voltage at each node in a circuit, which can then be used to find other quantities of interest, such as currents through specific components.

Consider, for instance, a simple circuit composed of three nodes and three resistors, as shown in Figure 1. The first step in nodal analysis involves selecting a reference or datum node. This node is typically chosen based on convenience, and its voltage is assigned a value of zero.

Figure1

Figure 1

The subsequent nodes, referred to as non-reference nodes, are assigned nodal voltages relative to this reference node. In the example considered here, there are two non-reference nodes labeled 1 and 2, each with their respective node voltages.

To establish a relation between the branch currents, Kirchhoff's Current Law (KCL) is applied to the non-reference nodes. KCL states that the algebraic sum of currents entering a node (or a closed boundary) is zero. This law is grounded on the principle of charge conservation – that is, a charge cannot be created or destroyed.

Following the application of KCL, Ohm's Law is used to express the branch currents passing through the three resistors in terms of the node voltages. Ohm's Law postulates that the current passing through a conductor between two points is directly proportional to the voltage across the two points.

With the branch currents expressed in terms of node voltages, these values are substituted into the equations derived from KCL. This substitution results in two simultaneous equations since, for a circuit with 'n' nodes, 'n-1' independent equations are obtained.

Lastly, if the values of the resistors and source currents are known, they can be substituted into the two equations. Solving these equations will yield the node voltages. This information is invaluable, as it can help in understanding the behavior of the circuit and in designing or troubleshooting electrical circuits.

In conclusion, nodal analysis is a powerful tool in circuit analysis, providing a systematic method to determine the distribution of voltages within a circuit, which can then be used to calculate other parameters like currents and power.

Tags
Nodal AnalysisElectrical EngineeringCircuit AnalysisNode VoltagesReference NodeNon reference NodesKirchhoff s Current LawKCLOhm s LawBranch CurrentsSimultaneous EquationsVoltage DistributionCircuit BehaviorTroubleshooting Circuits

장에서 2:

article

Now Playing

2.1 : Nodal Analysis

DC Circuit Analysis

631 Views

article

2.2 : 전압 소스를 사용한 노드 분석

DC Circuit Analysis

723 Views

article

2.3 : 메쉬 분석

DC Circuit Analysis

372 Views

article

2.4 : Current Sources를 사용한 메쉬 해석

DC Circuit Analysis

1.1K Views

article

2.5 : 소스 변환

DC Circuit Analysis

1.8K Views

article

2.6 : 리니어 회로

DC Circuit Analysis

294 Views

article

2.7 : 중첩 정리

DC Circuit Analysis

404 Views

article

2.8 : 테비닌의 정리

DC Circuit Analysis

277 Views

article

2.9 : 노턴의 정리

DC Circuit Analysis

342 Views

article

2.10 : 최대 전력 전송

DC Circuit Analysis

145 Views

article

2.11 : 설계 예: 스트레인 게이지 브리지 또는 휘트스톤 브리지

DC Circuit Analysis

191 Views

JoVE Logo

개인 정보 보호

이용 약관

정책

연구

교육

JoVE 소개

Copyright © 2025 MyJoVE Corporation. 판권 소유