stimulating nerve stem cell differentiation using cold atmospheric plasma treatment

Stimulating Nerve Stem Cell Differentiation Using Cold Atmospheric Plasma Treatment

To plasma-treat treat the neural stem cells, set the distance between the syringe nozzle and the first well of cells to 15 millimeters. Replace the supernatants in the neural stem cell cultures with 800 microliters of fresh differentiation medium, and place the plate under the plasma jets.
Making sure that the syringe nozzle is fixed over the center of each well, create three wells with plasma for 60 seconds per treatment, and three wells with 1% helium and oxygen gas for 60 seconds per treatment, leaving three wells untreated as controls. Then, replace the supernatants with one milliliter of fresh differentiation medium, and return the cells to the incubator for six days. Check the differentiation status of the different groups daily under an inverted phase contrast light microscope.
After the treatment, allow the cells to fully equilibrate in the conditioned medium for about one hour before replacing the supernatant with fresh differentiation medium.

stimulating-nerve-stem-cell-differentiation-using-cold-atmospheric

Research

JoVE Encyclopedia of Experiments

Neuroscience

Neuronal Culture Techniques

Advanced Neuronal Models

EoE Sub Articles

eoe sub articles

1. Cell Cultures and Predifferentiation
<ol>
	<li>Neural stem cell culture and predifferentiation
	<ol>
		<li>Prepare poly-D-lysine-coated coverslips. Put a sterile coverslip (20 mm in diameter) into a 12-well plate. Coat the cover glass with poly-D-lysine, 0.1% w/v, in water for better cell adhesion on the coverslips by following the next steps. 
		&#8203;NOTE: Optimal conditions must be determined for each cell line and application.
		<ol>
			<li>Aseptically coat the surface of the coverslip with poly-D-lysine, 0.1% w/v, in water. Rock gently to ensure an even coating of the coverslip surface.</li>
			<li>After culturing overnight (~12 h) at 37&#176;C, remove the poly-D-lysine solution and rinse the surface 3x with 1 mL of sterile water.</li>
			<li>Dry the cells at least 30 min before seeding them.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Murine neural stem cell C17.2 (C17.2-NSC) culture and predifferentiation
	<ol>
		<li>Incubate C17.2-NSCs in a 25 cm2 flask in Dulbecco&#39;s modified Eagle&#39;s medium (DMEM) supplemented with 10% fetal bovine serum (FBS), 5% horse serum (HS), and 1% penicillin/streptomycin at 37 &#176;C and 5% CO2 for ~2 - 3d.</li>
		<li>When the cells reach 85% confluence, remove the medium, wash the cells with 1 mL of PBS, and add 1 mL of fresh trypsin (0.25%) into the flask. Leave it for 1 min; then, add 1 mL of culture medium to the flask and pipette up and down several times to ensure a single-cell suspension.</li>
		<li>Count the density of the cells in the suspension using a hemocytometer. Calculate the required volume of cell suspension to give a final cell concentration of 2 x 104 cells/mL.</li>
		<li>Seed the C17.2-NSCs on the coated coverslips in the 12-well plate with a density of ~2 x 104 cells per well. Check the cell density under a microscope. 
		NOTE: For a better result, the optimal cell density must be determined before the immunofluorescence experiment.</li>
		<li>Incubate the cells at 37&#176;C in a cell incubator for 12 h to allow for attachment.</li>
		<li>After attachment, wash the cells 2x with 1 mL of PBS and cultivate the cells with a differentiation medium consisting of DMEM/F12 with 1% N2 supplement for 48 h before the plasma treatment.</li>
	</ol>
	</li>
	<li>Primary rat neural stem cell culture and predifferentiation
	<ol>
		<li>Culture the primary rat NSC (neural stem cells) suspension in rat NSC growth medium in uncoated T25 flasks at a density of 5 x 105 cells.</li>
		<li>Check the formation of neurospheres under an inverted microscope. Make sure the morphology of the neurospheres exhibits spherical and transparent multicellular complexes.</li>
		<li>When the neurospheres reach a diameter of 3 mm or larger, transfer the neurosphere suspension to a 15 mL sterile centrifuge tube and let the neurospheres settle by gravity.</li>
		<li>Remove the supernatant carefully to leave the neurospheres in a minimal volume of medium.</li>
		<li>Rinse the neurospheres 1x with 5 mL of PBS and let the neurospheres settle by gravity. Remove the supernatant to leave a minimal volume of PBS.</li>
		<li>Add a suitable volume of differentiation medium to adjust the cell density to ~12 - 15 neurospheres per milliliter. The differentiation medium for primary rat NSCs consists of DMEM/F12, 2% B27, and 1% FBS.</li>
		<li>Seed 1 mL of neurosphere suspension onto each coated coverslip in the 12-well plate. 
		NOTE: Shake the plate gently to ensure that the neurospheres are evenly distributed. This step is critical for a better immunofluorescence result.</li>
		<li>Place the plate into the incubator and allow it to predifferentiate for 24 h before the plasma treatment.</li>
	</ol>
	</li>
</ol>
2. Preparation of the Plasma Jets
<ol>
	<li>Choose a half-open quartz tube with an internal diameter of 2 mm and an external diameter of 4 mm. Insert a high-voltage wire with a diameter of 2 mm into the tube.</li>
	<li>Insert the quartz tube with the high-voltage wire into a 5 mL syringe and use a holder to mount it inside the center of the syringe. Set the distance between the sealed end of the quartz tube and the syringe tip at 1 cm.</li>
	<li>Connect a 1 m silicone rubber pipe (with an inner diameter of 12 mm) to the open end of the syringe and then, connect it to the flowmeter and gas valve in sequence.</li>
</ol>
3. Acquisition of the Jets
<ol>
	<li>Connect the circuit as shown in Figure 1. Connect the output wire of the power supply to the plasma jet device and then, connect the tip of the high-voltage probe with the output wire to detect the voltage. Connect the other end of the high-voltage probe to the oscilloscope to record the information of the output voltage. Check the whole circuit and make sure the power supply, the oscilloscope, and the high-voltage probe are all grounded.</li>
	<li>Check the gas line. Make sure the gas tube has been connected to the plasma jet device; then, open the gas valve of the helium (volume fraction, 99.999%) and oxygen (volume fraction, 99.999%) and set the gas flow to 1 L : 0.01 L/min (He:O2). 
	NOTE: Let the gas flow for several minutes before turning on the power supply for the first time.</li>
	<li>Set the pulse amplitude, frequency, and pulse width as 8 kV, 8 kHz, and 1600 ns, respectively. Check the circuit again and then, turn on the output button to create a plasma jet. 
	CAUTION: Do not touch the high-voltage wire at any time.</li>
</ol>
4. Plasma Treatment of Neural Stem Cell
<ol>
	<li>Set the distance between the nozzle of the syringe and the cell well hole to 15 mm. 
	NOTE: The distance is measured from the bottom of the platform where the 12-well plate is placed.</li>
	<li>Take the 12-well plate out of the incubator and change the medium of the predifferentiated cells to 800 &#181;L of fresh differentiation medium.</li>
	<li>Divide the cells into three groups: an untreated control group, a 60 s He-and-O2 (1%) gas flow treatment group, and a 60 s plasma treatment group. 
	NOTE: There is no obvious liquid loss under the treatment condition.</li>
	<li>Place the 12-well plate under the plasma jets, make sure the syringe nozzle is fixed in the center of each hole, and give the relevant treatment to the different groups mentioned in step 4.3. 
	NOTE: The untreated controls were kept in differentiation medium at room temperature during the experimental procedure to ensure uniform treatment conditions. The He-and-O2 (1%) gas flow treatment group was treated with only a He and O2 (1%) gas flow, without plasma generation. All the treatments should be performed in triplicate.</li>
</ol>
5. Neural Stem Cell Differentiation
<ol>
	<li>After treatment, remove the original culture and add 1 mL of new differentiation medium to each well.</li>
	<li>Incubate the cells in the incubator at 37&#176;C and 5% CO2 for 6 d. Change the medium every other day.</li>
	<li>Check the differentiation status of the different groups daily under an inverted phase-contrast light microscope Figure 2. Randomly select at least 12 fields and take photos to record the morphological changes.</li>
</ol>

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Coverslip</td>
			<td>NEST</td>
			<td>801008</td>
			<td></td>
		</tr>
		<tr>
			<td>Poly-D-lysine</td>
			<td>Beyotime</td>
			<td>P0128</td>
			<td></td>
		</tr>
		<tr>
			<td>DMEM medium</td>
			<td>HyClone</td>
			<td>SH30022.01B</td>
			<td>stored at 4 &#176;C</td>
		</tr>
		<tr>
			<td>DMEM/F12 medium</td>
			<td>HyClone</td>
			<td>SH30023.01B</td>
			<td>stored at 4 &#176;C</td>
		</tr>
		<tr>
			<td>N2 supplement</td>
			<td>Gibco</td>
			<td>17502048</td>
			<td>stored at -20 &#176;C and protect from light</td>
		</tr>
		<tr>
			<td>B27 supplement</td>
			<td>Gibco</td>
			<td>17504044</td>
			<td>stored at -20 &#176;C and protect from light</td>
		</tr>
		<tr>
			<td>Fetal bovine serum</td>
			<td>HyClone</td>
			<td>SH30084.03</td>
			<td>stored at -20 &#176;C, avoid repeated freezing and thawing</td>
		</tr>
		<tr>
			<td>Donor Horse serum</td>
			<td>HyClone</td>
			<td>SH30074.03</td>
			<td>tored at -20 &#176;C, avoid repeated freezing and thawing</td>
		</tr>
		<tr>
			<td>Penicillin/Streptomycin</td>
			<td>HyClone</td>
			<td>SV30010</td>
			<td>stored at 4 &#176;C</td>
		</tr>
		<tr>
			<td>Trypsin</td>
			<td>HyClone</td>
			<td>25300054</td>
			<td>stored at 4 &#176;C</td>
		</tr>
		<tr>
			<td>PBS solution</td>
			<td>HyClone</td>
			<td>SH30256.01B</td>
			<td>stored at 4 &#176;C</td>
		</tr>
		<tr>
			<td>4% paraformaldehyde</td>
			<td>Beyotime</td>
			<td>P0098</td>
			<td>stored at -20 &#176;C</td>
		</tr>
		<tr>
			<td>TritonX-100</td>
			<td>Sigma</td>
			<td>T8787</td>
			<td></td>
		</tr>
		<tr>
			<td>Light microscope</td>
			<td>Nanjing Jiangnan Novel Optics Company</td>
			<td>XD-202</td>
			<td></td>
		</tr>
		<tr>
			<td>High &#8211; voltage Power Amplifier</td>
			<td>Directed Energy</td>
			<td>PVX-4110</td>
			<td></td>
		</tr>
		<tr>
			<td>DC power supply</td>
			<td>Spellman</td>
			<td>SL1200</td>
			<td></td>
		</tr>
		<tr>
			<td>Function Generator</td>
			<td>Aligent</td>
			<td>33521A</td>
			<td></td>
		</tr>
		<tr>
			<td>Oscilloscope</td>
			<td>Tektronix</td>
			<td>DPO3034</td>
			<td></td>
		</tr>
		<tr>
			<td>High voltage probe</td>
			<td>Tektronix</td>
			<td>P6015A</td>
			<td></td>
		</tr>
		<tr>
			<td>12-well plate</td>
			<td>corning</td>
			<td>3512</td>
			<td></td>
		</tr>
		<tr>
			<td>25 cm2 flask</td>
			<td>corning</td>
			<td>430639</td>
			<td></td>
		</tr>
		<tr>
			<td>Helium gas&#160;</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Oxygen Gas&#160;</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Plasma jet nozzel&#160;</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>CO2 Incubator&#160;</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Silicone pipe</td>
			<td></td>
			<td></td>
			<td>inner diameter of 12 mm</td>
		</tr>
		<tr>
			<td>Murine neural stem cell C17.2 (C17.2-NSC)</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
	</tbody>
</table>

Source: Xiong, Z., et al. <a href="https://app.jove.com/v/58663">Nerve stem cell differentiation by a one-step cold atmospheric plasma treatment in vitro.</a> J. Vis. Exp. (2019).
This video presents a method for triggering differentiation in neural stem cells by utilizing cold atmospheric plasma. This generates UV radiation and reactive molecules to stimulate nerve cells to produce projections, indicating neuronal cell differentiation.

<img alt="Figure 1" src="/files/ftp_upload/22399/22399_Figure1.jpg" /> 
Figure 1: Schematic of the experimental set-up. The plasma jet device is connected to the output wire of the high-voltage power supply. The high-voltage probe with oscilloscope is used to detect the output voltage. When the working gases are flowing through the syringe and the high voltage is on, the plasma jet will be generated and propagate into the open air.
<p class="jove_content" fo:keep...

1. Cell Cultures and Predifferentiation

	Neural stem cell culture and predifferentiation
	
		Prepare poly-D-lysine-coated coverslips. Put a sterile ...

Begin with nerve stem cells cultured on an extracellular matrix-coated coverslip in a suitable differentiation medium.
Take a syringe containing a cold plasma, which is a state of matter containing various reactive components, including UV radiation and charged particles.
Position the nozzle of the plasma syringe at a specific height above the nerve cell culture.
Start the plasma jet.
The plasma interacts with the nerve stem cells, activating them.
Remove the old culture medium. Add a fresh culture medium and incubate.
Over time, the activated nerve stem cells produce projections.
Discard the medium.
Under an inverted phase contrast light microscope, the presence of elongated projections on the cells, resembling those found in a nerve cell, indicates differentiation.

15 조회수. Cold Atmospheric Plasma Treatment를 이용한 신경줄기세포 분화 자극

비디오: Cold Atmospheric Plasma Treatment를 이용한 신경줄기세포 분화 자극 - 실험

Protocol for the Differentiation of Human Induced Pluripotent Stem Cells into Mixed Cultures of Neurons and Glia for Neurotoxicity Testing

Human pluripotent stem cells can differentiate into various cell types that can be applied to human-based in vitro toxicity assays. One major advantage is that the reprogramming of somatic cells to produce human induced pluripotent stem cells (hiPSCs) avoids the ethical and legislative issues related to the use of human embryonic stem cells (hESCs). HiPSCs can be expanded and efficiently differentiated into different types of neuronal and glial cells, serving as test systems for toxicity testing and, in particular, for the assessment of different pathways involved in neurotoxicity. This work describes a protocol for the differentiation of hiPSCs into mixed cultures of neuronal and glial cells. The signaling pathways that are regulated and/or activated by neuronal differentiation are defined. This information is critical to the application of the cell model to the new toxicity testing paradigm, in which chemicals are assessed based on their ability to perturb biological pathways. As a proof of concept, rotenone, an inhibitor of mitochondrial respiratory complex I, was used to assess the activation of the Nrf2 signaling pathway, a key regulator of the antioxidant-response-element-(ARE)-driven cellular defense mechanism against oxidative stress.

Human induced pluripotent stem cells (hiPSCs) are considered a powerful tool for drug and chemical screening and for the development of new in vitro models for toxicity testing, including neurotoxicity. Here, a detailed protocol for the differentiation of hiPSCs into neurons and glia is described.

인간 독성 Pluripotent 줄기 세포의 신경 독성 테스트를위한 뉴런과 Glia의 혼합 문화로의 분화를위한 프로토콜

Human pluripotent stem cells can differentiate into various cell types that can be applied to human-based in vitro toxicity assays. One major advantage is ...

연구

JoVE Journal

발생학

Gold Nanorod-assisted Optical Stimulation of Neuronal Cells

Recent studies have demonstrated that nerves can be stimulated in a variety of ways by the transient heating associated with the absorption of infrared light by water in neuronal tissue. This technique holds great potential for replacing or complementing standard stimulation techniques, due to the potential for increased localization of the stimulus and minimization of mechanical contact with the tissue. However, optical approaches are limited by the inability of visible light to penetrate deep into tissues. Moreover, thermal modelling suggests that cumulative heating effects might be potentially hazardous when multiple stimulus sites or high laser repetition rates are used. The protocol outlined below describes an enhanced approach to the infrared stimulation of neuronal cells. The underlying mechanism is based on the transient heating associated with the optical absorption of gold nanorods, which can cause triggering of neuronal cell differentiation and increased levels of intracellular calcium activity. These results demonstrate that nanoparticle absorbers can enhance and/or replace the process of infrared neural stimulation based on water absorption, with potential for future applications in neural prostheses and cell therapies.

This protocol outlines how to use the transient heating associated with the optical absorption of gold nanorods to stimulate differentiation and intracellular calcium activity in neuronal cells. These results potentially open up new applications in neural prostheses and fundamental studies in neuroscience.

골드 신경 세포의 자극을 광학 나노로드가 보조

Recent studies have demonstrated that nerves can be stimulated in a variety of ways by the transient heating associated with the absorption of infrared ...

신경과학

Electric-Field-Induced Neural Precursor Cell Differentiation in Microfluidic Devices

Physiological electric fields (EF) play vital roles in cell migration, differentiation, division, and death. This paper describes a microfluidic cell culture system that was used for a long-term cell differentiation study using microscopy. The microfluidic system consists of the following major components: an optically transparent electrotactic chip, a transparent indium-tin-oxide (ITO) heater, a culture media-filling pump, an electrical power supply, a high-frequency power amplifier, an EF multiplexer, a programmable X-Y-Z motorized stage, and an inverted phase-contrast microscope equipped with a digital camera. The microfluidic system is beneficial in simplifying the overall experimental setup and, in turn, the reagent and sample consumption. This work involves the differentiation of neural stem and progenitor cells (NPCs) induced by direct current (DC) pulse stimulation. In the stem cell maintenance medium, the mouse NPCs (mNPCs) differentiated into neurons, astrocytes, and oligodendrocytes after the DC pulse stimulation. The results suggest that simple DC pulse treatment could control the fate of mNPCs and could be used to develop therapeutic strategies for nervous system disorders. The system can be used for cell culture in multiple channels, for long-term EF stimulation, for cell morphological observation, and for automatic time-lapse image acquisition. This microfluidic system not only shortens the required experimental time, but also increases the accuracy of control on the microenvironment.

In this study, we present a protocol for the differentiation of neural stem and progenitor cells (NPCs) solely induced by direct current (DC) pulse stimulation in a microfluidic system.

미세 유체 장치에서 전기장 유발 신경 전구체 세포 분화

Physiological electric fields (EF) play vital roles in cell migration, differentiation, division, and death. This paper describes a microfluidic cell ...

Stimulating Nerve Stem Cell Differentiation Using Cold Atmospheric Plasma Treatment

내레이션 대본

Stimulating Nerve Stem Cell Differentiation Using Cold Atmospheric Plasma Treatment