March 24th, 2023
•A simple and cost-efficient fabrication method based on the solvent evaporation technique is presented to optimize the performance of a soft capacitive pressure sensor, which is enabled by porosity control in the dielectric layer using different mass ratios of the molding PDMS/toluene solution.
Related Videos
Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
Synthesis and Microdiffraction at Extreme Pressures and Temperatures
Casting Protocols for the Production of Open Cell Aluminum Foams by the Replication Technique and the Effect on Porosity
Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Blast Quantification Using Hopkinson Pressure Bars
The Measurement of Unsteady Surface Pressure Using a Remote Microphone Probe
Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices
Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Studying Large Amplitude Oscillatory Shear Response of Soft Materials
Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot
Copyright © 2024 MyJoVE Corporation. 판권 소유