This work was supported by Charles University grants PRIMUS/MED/26, GAUK 1308217 and SVV 260310. We thank Ond&#345;ej &#352;ebesta for help with microscopy and development of the image analysis pipeline. We thank the ReGenEx lab for S. cerevisiae strains, and JapoNet and Hironori Niki&#8217;s lab for S. japonicus strains. The ppc1-88 strain was provided by The Yeast Genetic Resource Center Japan. Microscopy was performed in the Laboratory of Confocal and Fluorescence Microscopy co-financed by the European Regional Development Fund and the state budget of the Czech Republic (Project no. CZ.1.05/4.1.00/16.0347 and CZ.2.16/3.1.00/21515).

1. Preparation of Solutions and Media
<ol>
	<li>Prepare lipid staining solution.
	<ol>
		<li>To prepare stock lipid staining solution dissolve 10 mg of BODIPY 493/503 in 10 mL of anhydrous DMSO (final concentration 1 mg/mL). Dissolve the whole content of a 10 mg BODIPY 493/503 vial to prevent loss of material during weighing. 
		CAUTION: DMSO may pass through the skin. Wear appropriate personal protective equipment.</li>
		<li>Prepare working lipid staining solution by mixing 100 &#181;L of the 1 mg/mL BODIPY 493/503 stock solution and 900 &#181;L of anhydrous DMSO (final concentration 0.1 mg/mL).</li>
		<li>Aliquot the stock and working solutions, and store at -20 &#176;C. 
		NOTE: Dissolved BODIPY 493/503 is stable for several years at -20 &#176;C. However, the solution has to be protected from moisture and light.</li>
	</ol>
	</li>
	<li>To prepare stock solution for cell boundary visualization, dissolve 25 mg of Cascade Blue dextran (whole vial) in 2.5 mL of deionized water (final concentration 10 mg/mL). Aliquot the stock solution and store at -20 &#176;C protected from light.</li>
	<li>To prepare microscope slide coating solution, dissolve 5 mg of soybean lectin in 5 mL of deionized water (final concentration 1 mg/mL). Aliquot the lectin solution and store at -80 &#176;C. 
	NOTE: The lectin solution is stable for several years at -80 &#176;C. Aliquots currently at use may be stored at -20 &#176;C.</li>
	<li>Prepare cultivation media.
	<ol>
		<li>To prepare 400 mL of complex YES cultivation medium for S. pombe and S. japonicus, dissolve 2 g of yeast extract and 0.1 g of SP supplements (if required for auxotrophic mutants) in 340 mL of deionized water in a 500 mL bottle and autoclave. Add 60 mL of 20% (w/v) of separately autoclaved or filter-sterilized glucose in aseptic conditions.</li>
		<li>To prepare 400 mL of defined EMM cultivation medium for S. pombe and S. japonicus, dissolve 4.9 g of EMM broth without dextrose in 360 mL of deionized water in a 500 mL bottle and autoclave. Add 40 mL of 20% (w/v) of separately autoclaved or filter-sterilized glucose in aseptic conditions. 
		NOTE: For general guidelines on S. pombe and S. japonicus cultivation see25 and26, respectively.</li>
		<li>To prepare 300 mL of complex YPAD cultivation medium for Saccharomyces cerevisiae, dissolve 3 g of yeast extract, 6 g of peptone and 30 mg of adenine sulphate in 270 mL of deionized water in a 500 mL bottle and autoclave. Add 30 mL of 20% (w/v) of separately autoclaved or filter-sterilized glucose in aseptic conditions.</li>
		<li>To prepare 300 mL of defined minimal medium for S. cerevisiae, dissolve 2 g of yeast nitrogen base (without amino acids) in 270 mL of deionized water in a 500 mL bottle and autoclave. Add 30 mL of 20% (w/v) of separately autoclaved or filter-sterilized glucose in aseptic conditions. 
		NOTE: For general guidelines on S. cerevisiae cultivation see27.</li>
	</ol>
	</li>
</ol>
2. Cell Cultivation
<ol>
	<li>Growing S. pombe or S. japonicus to exponential or early stationary phase.
	<ol>
		<li>In the morning, inoculate 5 mL of YES medium with fresh fission yeast biomass. Incubate at 32 &#176;C with shaking (180 rpm) for several hours. 
		NOTE: For all cultivations, use Erlenmeyer flasks having 10 times the volume of culture to ensure proper aeration. Some laboratories prefer to grow fission yeasts at 30 &#176;C, but cultivation temperature of 32 &#176;C results in shorter doubling times without detrimental effects to the cells, thus reducing the total time required to perform an experiment25,28.</li>
		<li>In late afternoon of the same day (after at least 6 hours of cultivation), dilute the culture with fresh YES medium to a 10 mL final culture volume so that it reaches the desired optical density (OD) (or number of cells/mL) the following morning, and incubate at 32 &#176;C with shaking (180 rpm). It is of advantage to know the doubling time of each used strain to accurately determine the dilution factor (use Equation 1). 
		<img alt="Equation 1" src="/files/ftp_upload/59889/59889eq01v3.jpg" /> 
		Where Vculture is the preculture volume needed for dilution, Vfinal is the total volume of the new culture (10 mL for standard cultivations), ODfinal is the desired OD to be reached the following morning, ODcurrent is the currently measured OD of the preculture, t is the time of cell growth until harvesting, tlag is duration of the lag phase (depends on laboratory conditions, needs to be empirically defined) and tDT is the doubling time of the strain. 
		NOTE: When exponential-phase cells are to be analyzed, do not let precultures reach the stationary phase as this dramatically alters cell physiology (including LD content) for several subsequent generations.</li>
		<li>In the morning of imaging day, if the culture reached slightly higher OD than required (in case of exponential-phase cells), dilute it with fresh YES and continue incubation for at least two more doubling times before staining of LDs. Otherwise proceed directly to staining (Section 3).</li>
	</ol>
	</li>
	<li>Growing S. cerevisiae to exponential and stationary phase.
	<ol>
		<li>In the afternoon, inoculate 10 mL of YPAD medium with a small amount of fresh budding yeast biomass and incubate overnight at 30 &#176;C with shaking (180 rpm).</li>
		<li>The morning of imaging day, dilute the culture to OD 0.1 in 10 mL of YPAD medium and grow to the required OD (e.g., OD 1 for exponential phase). Perform any culture dilutions as described in step 2.1.2. Proceed to staining (Section 3).</li>
	</ol>
	</li>
</ol>
3. Lipid Droplet Staining
<ol>
	<li>Prepare a microscope cover slip for each sample to be imaged. Spread 1 &#181;L of slide coating solution onto a clean cover slip using the long side of a horizontally positioned pipette tip. Allow the coating solution to dry completely and store the cover slips in a dust-free environment. 
	NOTE: Glass slides and coverslips can be cleaned prior to use if required. The cleaning procedure consists of washing with dishwashing detergent, rinsing with water, overnight soaking in 3% hydrochloric acid, and washing with distilled water. Cleaned slides and coverslips are stored in pure ethanol until use.</li>
	<li>Measure the OD of cell culture or number of cells/mL, as required. Try to reach similar values among all tested strains to ensure comparable experimental conditions.</li>
	<li>Pipette 1 mL of each cell culture to a 1.5 mL microcentrifuge tube. For S. cerevisiae only, add 5 &#181;L of the slide coating solution, vortex briefly, and incubate at 30 &#176;C with shaking for 5 min.</li>
	<li>Add 1 &#181;L of the lipid staining solution to each culture aliquot and vortex briefly. Then add 10 &#181;L of the cell boundary visualization solution and vortex briefly. 
	NOTE: Do not prepare pre-mixed solutions of both stains as this leads to fluorescence quenching of BODIPY 493/503.</li>
	<li>Collect the cells by centrifugation (1,000 x g, 3 min, RT) and remove almost all supernatant (~950 &#181;L). Resuspend the cells in the remaining supernatant.</li>
	<li>Pipette 2 &#181;L of the dense cell suspension on a lectin-coated cover slip and place onto a clean microscope slide. The cells should form a monolayer. Proceed to microscopy (Section 4) as quickly as possible to minimize artefacts in imaging; process maximum of two samples at a time.</li>
</ol>
4. Setting up the Microscope and Imaging
<ol>
	<li>Optimize imaging conditions. 
	NOTE: Setting up the microscope requires long exposures to strong light sources that could cause damage to the sample and skew results. Therefore, set up the imaging conditions using a dedicated sample slide that will not be further used for LD quantification.
	<ol>
		<li>Focus on the cells using phase contrast or differential interference contrast (DIC). 
		NOTE: Phase contrast or DIC images may be taken for reference, but they are not used during the automated image analysis step.</li>
		<li>Set z-stack settings to span the whole cell volume. The total vertical distance depends on the cell size; the number of optical slices depends on the numerical aperture of the objective (point spread function in z-axis). Set the focus to move relative to the central focal plane. 
		NOTE: The optimal number of slices is often set by the microscope control software and does not need to be calculated manually. The typical cell widths are 3-5 &#181;m for S. pombe, 4-7 &#181;m for S. japonicus, and 3-7 &#181;m for S. cerevisiae.</li>
		<li>To image LDs, set light intensity and exposure time in the green channel (excitation and emission maxima of BODIPY are 493 and 503 nm, respectively). 
		NOTE: BODIPY 493/503 is a very bright fluorochrome; however, it may get bleached rapidly with overly strong light intensity. Moreover, LDs are mobile in live cells, thus minimize exposure time and capture the full green-channel z-stack first (before switching to the blue channel) to prevent blurring artifacts. Also, take into account the linear range of the camera for signal intensity to avoid saturated pixels.</li>
		<li>To image cell boundaries, set light intensity and exposure time in the blue channel (excitation and emission maxima of Cascade Blue dextran are 400 and 420 nm, respectively). 
		NOTE: Signal intensity in the blue channel is required for image segmentation, but it is not used for LD quantification itself. Therefore, optimal settings in this channel are not crucial for analysis.</li>
		<li>If possible, create an automated experimental workflow in the microscope control software to facilitate imaging of multiple samples under standardized conditions.</li>
	</ol>
	</li>
	<li>Once imaging conditions have been optimized, image samples to be used for quantification. Focus on the cells and image them in green and blue channels as described in Step 4.1. 
	NOTE: All images must be acquired using the same settings to allow comparison between samples. Image multiple fields of view per sample to obtain robust, representative data.</li>
	<li>Save the blue and green channel z-stack images as 16-bit multi-layer TIFF files (i.e., two files per field of view). Include words &#8220;green&#8221; or &#8220;blue&#8221; in the corresponding file names. Proceed with image analysis (Section 5).</li>
</ol>
5. Image Analysis
<ol>
	<li>Visually check the quality of acquired images.
	<ol>
		<li>Open microscopic images in ImageJ29,30 or other suitable image analysis software.</li>
		<li>Remove any image stacks containing a considerable number of cells that moved during acquisition (and thus created blurring artifacts).</li>
		<li>Remove any image stacks containing highly fluorescent non-cell particles in the blue channel (e.g., dirt on microscope slide or cover slip, impurities in cultivation medium). 
		NOTE: Very bright non-cell objects in the blue channel may create cell detection artifacts or may interfere with detection of cells in their vicinity.</li>
		<li>Remove any image stacks containing a large proportion of dead cells (i.e., cells with increased blue fluorescence compared to live cells). 
		NOTE: While the presence of a small proportion of dead cells in the sample is typically not a problem and these cells are automatically discarded during analysis, some dead or dying cells may occasionally be recognized as live cells by the segmentation algorithm and thus skew the reported results.</li>
	</ol>
	</li>
	<li>Analyze images in the MATLAB software.
	<ol>
		<li>Create a main folder and copy all MATLAB scripts to this location.</li>
		<li>Create a sub-folder (&#8220;pombe&#8221;, &#8220;cerevisiae&#8221; or &#8220;japonicus&#8221;) and copy input TIFF image files to this location.</li>
		<li>Start MATLAB, open script MAIN.m and run it. In the menu select the yeast species to be analyzed and start image processing. 
		NOTE: Some of the parameters required for cell and LD detection are pre-set for the particular species, others are determined automatically during image processing. The pre-set values were determined empirically and depend on several factors such as objective magnification, camera type and sensitivity, and imaging settings. If required, users may edit the script files to change the organism-specific presets to better reflect their experimental setup. Namely, during cell recognition acceptable object sizes are given by the &#8220;minArea&#8221; and &#8220;maxArea&#8221; parameters, and the minimum fraction of filled volume within the object boundaries is given by the &#8220;Solidity&#8221; parameter. For LD recognition, the brightness threshold is given by the &#8220;th&#8221; parameter (its value is affected mostly by image bit depth and fluorescence signal intensity), and maximum acceptable LD size is given by the &#8220;MaxArea&#8221; parameter.</li>
		<li>Inspect and process the output files as required using a spreadsheet editor or statistical package; the workflow produces semicolon-separated CSV files, and segmented TIFF files with detected cell objects and LDs. 
		NOTE: The workflow segments images into background and cell objects, where each cell object may be composed of multiple adjacent cells. Therefore, the output in &#8220;xxxx_cells.csv&#8221; files does not represent single-cell data and should only be used to calculate per-unit-of-cell-volume metrics.</li>
	</ol>
	</li>
</ol>

<ol><li>Koch, B., Schmidt, C., Daum, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Storage+lipids+of+yeasts%3A+a+survey+of+nonpolar+lipid+metabolism+in+Saccharomyces+cerevisiae%2C+Pichia+pastoris%2C+and+Yarrowia+lipolytica%5BTitle%5D)+AND+%22FEMS+Microbiology+Reviews%22%5BJournal%5D)">Storage lipids of yeasts: a survey of nonpolar lipid metabolism in Saccharomyces cerevisiae, Pichia pastoris, and Yarrowia lipolytica.</a> FEMS Microbiology Reviews. 38 (5), 892-915 (2014).</li>
<li>Krahmer, N., Farese, R. V., Walther, T. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Balancing+the+fat%3A+lipid+droplets+and+human+disease%5BTitle%5D)+AND+%22EMBO+Molecular+Medicine%22%5BJournal%5D)">Balancing the fat: lipid droplets and human disease.</a> EMBO Molecular Medicine. 5 (7), 973-983 (2013).</li>
<li>Lazar, Z., Liu, N., Stephanopoulos, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Holistic+Approaches+in+Lipid+Production+by+Yarrowia+lipolytica%5BTitle%5D)+AND+%22Trends+in+Biotechnology%22%5BJournal%5D)">Holistic Approaches in Lipid Production by Yarrowia lipolytica.</a> Trends in Biotechnology. 36 (11), 1157-1170 (2018).</li>
<li>Kim, D. U., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Analysis+of+a+genome-wide+set+of+gene+deletions+in+the+fission+yeast+Schizosaccharomyces+pombe%5BTitle%5D)+AND+%22Nature+Biotechnology%22%5BJournal%5D)">Analysis of a genome-wide set of gene deletions in the fission yeast Schizosaccharomyces pombe.</a> Nature Biotechnology. 28 (6), 1628-1629 (2010).</li>
<li>Giaever, G., Nislow, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((The+yeast+deletion+collection%3A+a+decade+of+functional+genomics%5BTitle%5D)+AND+%22Genetics%22%5BJournal%5D)">The yeast deletion collection: a decade of functional genomics.</a> Genetics. 197 (2), 451-465 (2014).</li>
<li>Meyers, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((The+protein+and+neutral+lipid+composition+of+lipid+droplets+isolated+from+the+fission+yeast%2C+Schizosaccharomyces+pombe%5BTitle%5D)+AND+%22Journal+of+Microbiology+%28Seoul%2C+Korea%29%22%5BJournal%5D)">The protein and neutral lipid composition of lipid droplets isolated from the fission yeast, Schizosaccharomyces pombe.</a> Journal of Microbiology (Seoul, Korea). 55 (2), 112-122 (2017).</li>
<li>Meyers, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Lipid+Droplets+Form+from+Distinct+Regions+of+the+Cell+in+the+Fission+Yeast+Schizosaccharomyces+pombe%5BTitle%5D)+AND+%22Traffic+%28Copenhagen%2C+Denmark%29%22%5BJournal%5D)">Lipid Droplets Form from Distinct Regions of the Cell in the Fission Yeast Schizosaccharomyces pombe.</a> Traffic (Copenhagen, Denmark). 17 (6), 657-659 (2016).</li>
<li>Long, A. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Lipid+droplet+de+novo+formation+and+fission+are+linked+to+the+cell+cycle+in+fission+yeast%5BTitle%5D)+AND+%22Traffic+%28Copenhagen%2C+Denmark%29%22%5BJournal%5D)">Lipid droplet de novo formation and fission are linked to the cell cycle in fission yeast.</a> Traffic (Copenhagen, Denmark). 13 (5), 705-714 (2012).</li>
<li>Yang, H. J., Osakada, H., Kojidani, T., Haraguchi, T., Hiraoka, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Lipid+droplet+dynamics+during+Schizosaccharomyces+pombe+sporulation+and+their+role+in+spore+survival%5BTitle%5D)+AND+%22Biology+Open%22%5BJournal%5D)">Lipid droplet dynamics during Schizosaccharomyces pombe sporulation and their role in spore survival.</a> Biology Open. , 8(2016).</li>
<li>Aoki, K., Shiwa, Y., Takada, H., Yoshikawa, H., Niki, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Regulation+of+nuclear+envelope+dynamics+via+APC%2FC+is+necessary+for+the+progression+of+semi-open+mitosis+in+Schizosaccharomyces+japonicus%5BTitle%5D)+AND+%22Genes+To+Cells%3A+Devoted+To+Molecular+%26+Cellular+Mechanisms%22%5BJournal%5D)">Regulation of nuclear envelope dynamics via APC/C is necessary for the progression of semi-open mitosis in Schizosaccharomyces japonicus.</a> Genes To Cells: Devoted To Molecular & Cellular Mechanisms. 18 (9), 733-752 (2013).</li>
<li>Karolin, J., Johansson, L. B. A., Strandberg, L., Ny, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Fluorescence+and+Absorption+Spectroscopic+Properties+of+Dipyrrometheneboron+Difluoride+%28BODIPY%29+Derivatives+in+Liquids%2C+Lipid+Membranes%2C+and+Proteins%5BTitle%5D)+AND+%22Journal+of+the+American+Chemical+Society%22%5BJournal%5D)">Fluorescence and Absorption Spectroscopic Properties of Dipyrrometheneboron Difluoride (BODIPY) Derivatives in Liquids, Lipid Membranes, and Proteins.</a> Journal of the American Chemical Society. 116 (17), 7801-7806 (1994).</li>
<li>Bozaquel-Morais, B. L., Madeira, J. B., Maya-Monteiro, C. M., Masuda, C. A., Montero-Lomeli, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+new+fluorescence-based+method+identifies+protein+phosphatases+regulating+lipid+droplet+metabolism%5BTitle%5D)+AND+%22PloS+One%22%5BJournal%5D)">A new fluorescence-based method identifies protein phosphatases regulating lipid droplet metabolism.</a> PloS One. 5 (10), e13692(2010).</li>
<li>Sitepu, I. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((An+improved+high-throughput+Nile+red+fluorescence+assay+for+estimating+intracellular+lipids+in+a+variety+of+yeast+species%5BTitle%5D)+AND+%22Journal+of+Microbiological+Methods%22%5BJournal%5D)">An improved high-throughput Nile red fluorescence assay for estimating intracellular lipids in a variety of yeast species.</a> Journal of Microbiological Methods. 91 (2), 321-328 (2012).</li>
<li>Rostron, K. A., Lawrence, C. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Nile+Red+Staining+of+Neutral+Lipids+in+Yeast%5BTitle%5D)+AND+%22Methods+in+Molecular+Biology+%28Clifton%2C+N.J.%29%22%5BJournal%5D)">Nile Red Staining of Neutral Lipids in Yeast.</a> Methods in Molecular Biology (Clifton, N.J.). 1560, 219-229 (2017).</li>
<li>Romero-Aguilar, L., Montero-Lomeli, M., Pardo, J. P., Guerra-Sánchez, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Lipid+Index+Determination+by+Liquid+Fluorescence+Recovery+in+the+Fungal+Pathogen+Ustilago+Maydis%5BTitle%5D)+AND+%22Journal+of+Visualized+Experiments%22%5BJournal%5D)">Lipid Index Determination by Liquid Fluorescence Recovery in the Fungal Pathogen Ustilago Maydis.</a> Journal of Visualized Experiments. (134), 1-6 (2018).</li>
<li>Gupta, A., Dorlhiac, G. F., Streets, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Quantitative+imaging+of+lipid+droplets+in+single+cells%5BTitle%5D)+AND+%22The+Analyst%22%5BJournal%5D)">Quantitative imaging of lipid droplets in single cells.</a> The Analyst. , (2018).</li>
<li>Wolinski, H., Bredies, K., Kohlwein, S. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Quantitative+imaging+of+lipid+metabolism+in+yeast%3A+from+4D+analysis+to+high+content+screens+of+mutant+libraries%5BTitle%5D)+AND+%22Methods+in+Cell+Biology%22%5BJournal%5D)">Quantitative imaging of lipid metabolism in yeast: from 4D analysis to high content screens of mutant libraries.</a> Methods in Cell Biology. , 108-365 (2012).</li>
<li>Campos, V., Rappaz, B., Kuttler, F., Turcatti, G., Naveiras, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((High-throughput%2C+nonperturbing+quantification+of+lipid+droplets+with+digital+holographic+microscopy%5BTitle%5D)+AND+%22Journal+of+Lipid+Research%22%5BJournal%5D)">High-throughput, nonperturbing quantification of lipid droplets with digital holographic microscopy.</a> Journal of Lipid Research. 59 (7), 1301-1310 (2018).</li>
<li>Ranall, M. V., Gabrielli, B. G., Gonda, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((High-content+imaging+of+neutral+lipid+droplets+with+1%2C6-diphenylhexatriene%5BTitle%5D)+AND+%22BioTechniques%22%5BJournal%5D)">High-content imaging of neutral lipid droplets with 1,6-diphenylhexatriene.</a> BioTechniques. 51 (1), 35-42 (2011).</li>
<li>Schnitzler, J. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Nile+Red+Quantifier%3A+a+novel+and+quantitative+tool+to+study+lipid+accumulation+in+patient-derived+circulating+monocytes+using+confocal+microscopy%5BTitle%5D)+AND+%22Journal+of+Lipid+Research%22%5BJournal%5D)">Nile Red Quantifier: a novel and quantitative tool to study lipid accumulation in patient-derived circulating monocytes using confocal microscopy.</a> Journal of Lipid Research. 58 (11), 2210-2219 (2017).</li>
<li>Bombrun, M., Gao, H., Ranefall, P., Mejhert, N., Arner, P., Wählby, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Quantitative+high-content%2Fhigh-throughput+microscopy+analysis+of+lipid+droplets+in+subject-specific+adipogenesis+models%5BTitle%5D)+AND+%22Cytometry.+Part+A+the+journal+of+the+International+Society+for+Analytical+Cytology%22%5BJournal%5D)">Quantitative high-content/high-throughput microscopy analysis of lipid droplets in subject-specific adipogenesis models.</a> Cytometry. Part A the journal of the International Society for Analytical Cytology. 91 (11), 1068-1077 (2017).</li>
<li>Capus, A., Monnerat, M., Ribeiro, L. C., de Souza, W., Martins, J. L., Sant’Anna, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Application+of+high-content+image+analysis+for+quantitatively+estimating+lipid+accumulation+in+oleaginous+yeasts+with+potential+for+use+in+biodiesel+production%5BTitle%5D)+AND+%22Bioresource+Technology%22%5BJournal%5D)">Application of high-content image analysis for quantitatively estimating lipid accumulation in oleaginous yeasts with potential for use in biodiesel production.</a> Bioresource Technology. 203, 309-317 (2016).</li>
<li>Lv, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Identification+of+gene+products+that+control+lipid+droplet+size+in+yeast+using+a+high-throughput+quantitative+image+analysis%5BTitle%5D)+AND+%22Biochimica+et+biophysica+acta.+Molecular+and+Cell+Biology+Of+Lipids%22%5BJournal%5D)">Identification of gene products that control lipid droplet size in yeast using a high-throughput quantitative image analysis.</a> Biochimica et biophysica acta. Molecular and Cell Biology Of Lipids. 1864 (2), 113-127 (2018).</li>
<li>Zach, R., Tvarůžková, J., Schätz, M., Ťupa, O., Grallert, B., Převorovský, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Mitotic+defects+in+fission+yeast+lipid+metabolism+%E2%80%9Ccut%E2%80%9D+mutants+are+suppressed+by+ammonium+chloride%5BTitle%5D)+AND+%22FEMS+Yeast+Research%22%5BJournal%5D)">Mitotic defects in fission yeast lipid metabolism “cut” mutants are suppressed by ammonium chloride.</a> FEMS Yeast Research. 18 (6), 1-7 (2018).</li>
<li>Petersen, J., Russell, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Growth+and+the+Environment+of+Schizosaccharomyces+pombe%5BTitle%5D)+AND+%22Cold+Spring+Harbor+Protocols%22%5BJournal%5D)">Growth and the Environment of Schizosaccharomyces pombe.</a> Cold Spring Harbor Protocols. 2016 (3), (2016).</li>
<li>Aoki, K., Furuya, K., Niki, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Schizosaccharomyces+japonicus%3A+A+Distinct+Dimorphic+Yeast+among+the+Fission+Yeasts%5BTitle%5D)+AND+%22Cold+Spring+Harbor+Protocols%22%5BJournal%5D)">Schizosaccharomyces japonicus: A Distinct Dimorphic Yeast among the Fission Yeasts.</a> Cold Spring Harbor Protocols. (12), (2017).</li>
<li>Curran, B. P. G., Bugeja, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Basic+investigations+in+Saccharomyces+cerevisiae%5BTitle%5D)+AND+%22Methods+in+Molecular+Biology+%28Clifton%2C+N.J.%29%22%5BJournal%5D)">Basic investigations in Saccharomyces cerevisiae.</a> Methods in Molecular Biology (Clifton, N.J.). , 1-14 (2014).</li>
<li>Sabatinos, S. A., Forsburg, S. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Molecular+genetics+of+Schizosaccharomyces+pombe%5BTitle%5D)+AND+%22Methods+in+Enzymology%22%5BJournal%5D)">Molecular genetics of Schizosaccharomyces pombe.</a> Methods in Enzymology. 470 (10), 759-795 (2010).</li>
<li>Schindelin, J., Rueden, C. T., Hiner, M. C., Eliceiri, K. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((The+ImageJ+ecosystem%3A+An+open+platform+for+biomedical+image+analysis%5BTitle%5D)+AND+%22Molecular+Reproduction+and+Development%22%5BJournal%5D)">The ImageJ ecosystem: An open platform for biomedical image analysis.</a> Molecular Reproduction and Development. 82 (7-8), 518-529 (2015).</li>
<li>Schindelin, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Fiji%3A+an+open-source+platform+for+biological-image+analysis%5BTitle%5D)+AND+%22Nature+Methods%22%5BJournal%5D)">Fiji: an open-source platform for biological-image analysis.</a> Nature Methods. 9 (7), 676-682 (2012).</li>
<li>Nakamura, T., Pluskal, T., Nakaseko, Y., Yanagida, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Impaired+coenzyme+A+synthesis+in+fission+yeast+causes+defective+mitosis%2C+quiescence-exit+failure%2C+histone+hypoacetylation+and+fragile+DNA%5BTitle%5D)+AND+%22Open+Biology%22%5BJournal%5D)">Impaired coenzyme A synthesis in fission yeast causes defective mitosis, quiescence-exit failure, histone hypoacetylation and fragile DNA.</a> Open Biology. 2 (9), 120117(2012).</li>
<li>Furuya, K., Niki, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Isolation+of+heterothallic+haploid+and+auxotrophic+mutants+of+Schizosaccharomyces+japonicus%5BTitle%5D)+AND+%22Yeast%22%5BJournal%5D)">Isolation of heterothallic haploid and auxotrophic mutants of Schizosaccharomyces japonicus.</a> Yeast. 26 (4), 221-233 (2009).</li>
<li>Ivnitski-Steele, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Identification+of+Nile+red+as+a+fluorescent+substrate+of+the+Candida+albicans+ATP-binding+cassette+transporters+Cdr1p+and+Cdr2p+and+the+major+facilitator+superfamily+transporter+Mdr1p%5BTitle%5D)+AND+%22Analytical+Biochemistry%22%5BJournal%5D)">Identification of Nile red as a fluorescent substrate of the Candida albicans ATP-binding cassette transporters Cdr1p and Cdr2p and the major facilitator superfamily transporter Mdr1p.</a> Analytical Biochemistry. 394 (1), 87-91 (2009).</li>
<li>Wolinski, H., Kohlwein, S. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Microscopic+analysis+of+lipid+droplet+metabolism+and+dynamics+in+yeast%5BTitle%5D)+AND+%22Methods+in+Molecular+Biology+%28Clifton%2C+N.J.%29%22%5BJournal%5D)">Microscopic analysis of lipid droplet metabolism and dynamics in yeast.</a> Methods in Molecular Biology (Clifton, N.J.). 457 (1), 151-163 (2008).</li>
<li>Graml, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+genomic+Multiprocess+survey+of+machineries+that+control+and+link+cell+shape%2C+microtubule+organization%2C+and+cell-cycle+progression%5BTitle%5D)+AND+%22Developmental+Cell%22%5BJournal%5D)">A genomic Multiprocess survey of machineries that control and link cell shape, microtubule organization, and cell-cycle progression.</a> Developmental Cell. 31 (2), 227-239 (2014).</li>
</ol>

The authors have nothing to disclose.

The understanding of lipid metabolism and its regulation is important for both basic biology, and clinical and biotechnological applications. LD content represents a convenient readout of lipid metabolism state of the cell, with fluorescence microscopy being one of the major methods used for LD content determination. The presented protocol allows automated detection and quantitative description of individual LDs in three different and morphologically distinct yeast species. To our knowledge, no similar tools exist for th...

Lipids play crucial roles in cellular energy and carbon metabolism, synthesis of membrane components, and production of bioactive substances. Lipid metabolism is fine-tuned according to environmental conditions, nutrient availability and cell-cycle phase1. In humans, lipid metabolism has been connected to diseases, such as obesity, type II diabetes and cancer2. In industry, lipids produced by microorganisms, such as yeasts, represent a promising source of renewable diesel fuels3. Cells store neutral lipids in so-called lipid droplets (LDs). These evolutionarily conserved bodies are composed of triacylglycerols, steryl esters, an outer phospholipid monolayer and associated proteins1. LDs originate in the endoplasmic reticulum, exert cell-cycle or growth-phase dynamics, and are important for cellular lipid homeostasis1. LD number and morphology can be used as a convenient proxy when assaying lipid metabolism under various growth conditions or when screening a panel of mutants. Given their dynamic nature, techniques capable of analyzing the properties of individual LDs are of particular interest in studies of lipid metabolism.
Various yeast species have been used to describe lipid-related metabolic pathways and their regulation, or used in biotechnology to produce interesting compounds or fuels1. Furthermore, for model yeasts, such as the budding yeast Saccharomyces cerevisiae or the distantly related fission yeast Schizosaccharomyces pombe, genome-wide deletion strain libraries are available that can be used for high-throughput screens4,5. Recently LD composition and dynamics have been described in S. pombe6,7,8,9, and mutants related to lipid metabolism have been isolated in the emerging model yeast Schizosaccharomyces japonicus10.
Numerous techniques are available to study LD content and dynamics. Most employ some kind of staining of LDs with lipophilic dyes such as Nile Red or BODIPY 493/503. The latter shows more narrow excitation and emission spectra, and increased specificity towards neutral lipids (LDs) as opposed to phospholipids (membranes)11. Fluorimetric and flow-cytometry methods have been used successfully in various fungal species to uncover genes and growth conditions that affect storage lipid content12,13,14,15. While these methods are suitable for high-throughput applications, they cannot measure the numbers and morphology of individual LDs in cells, which can differ dramatically between growth conditions and genotypes. Coherent Raman scattering or digital holographic microscopy are label-free methods that yield LD-level data, but require specialized expensive equipment16,17,18. Fluorescence microscopy, on the other hand, can provide detailed data on LD content, while utilizing commonly available instruments and image analysis software tools. Several analysis workflows exist that feature various degrees of sophistication and automation in cell/LD detection from image data, and are optimized for different cell types, such as metazoan cells with large LDs19,20,21, or budding yeasts17,22,23. Some of these approaches only work in 2D (e.g., on maximum projection images), which may fail to reliably describe the cellular LD content. To our knowledge, no tools exist for determination of LD content and morphology from fission yeast microscopic data. Development of automated and robust LD-level analyses would bring increased sensitivity and enhanced statistical power, and provide rich information on neutral lipid content, ideally in multiple yeast species.
We have developed a workflow for LD content analysis from 3D fluorescence microscopy images of yeast cells. Live cells are stained with BODIPY 493/503 and Cascade Blue dextran to visualize LDs and determine cell boundaries, respectively. Cells are immobilized on glass slides and subjected to z-stack imaging using a standard epifluorescence microscope. Images are then processed by an automated pipeline implemented in MATLAB, a widely used (commercial) package for statistical analyses. The pipeline performs image preprocessing, segmentation (cells vs. background, removal of dead cells), and LD identification. Rich LD-level data, such as LD size and fluorescence intensity, are then provided in a tabular format compatible with major spreadsheet software tools. The workflow was used successfully to determine the impact of nitrogen source availability on lipid metabolism in S. pombe24. We now demonstrate the functionality of the workflow in S. pombe, S. japonicus and S. cerevisiae, using growth conditions or mutants that affect cellular LD content.

<table><tbody><tr><td>12-bit monochromatic CCD camera Hamamatsu ORCA C4742-80-12AG</td><td>Hamamatsu</td><td>&amp;nbsp;</td><td>or equivalent</td></tr><tr><td>Adenine hemisulfate salt, &amp;ge;99%</td><td>Merck</td><td>A9126-25G</td><td>&amp;nbsp;</td></tr><tr><td>BODIPY 493/503 (4,4-Difluoro-1,3,5,7,8-Pentamethyl-4-Bora-3a,4a-Diaza-s-Indacene)</td><td>Thermo Fisher Scientific</td><td>D3922</td><td>for neutral lipid staining</td></tr><tr><td>D-(+) - Glucose, &amp;ge;99.5%</td><td>Merck</td><td>G7021</td><td>&amp;nbsp;</td></tr><tr><td>Dextran, Cascade Blue, 10,000 MW, Anionic, Lysine Fixable</td><td>Thermo Fisher Scientific</td><td>D1976</td><td>for negative staining of cells</td></tr><tr><td>Dimethyl sulfoxide, &amp;ge;99.5%</td><td>Merck</td><td>D4540</td><td>or higher purity, keep anhydrous on molecular sieves</td></tr><tr><td>EMM broth without dextrose</td><td>Formedium</td><td>PMD0405</td><td>medium may also be prepared from individual components</td></tr><tr><td>Fiji/ImageJ software</td><td>NIH</td><td>&amp;nbsp;</td><td>or equivalent; for visual inspection of microscopic data</td></tr><tr><td>High precision cover glasses, 22 mm x 22 mm, No 1.5</td><td>VWR</td><td>630-2186</td><td>use any # 1.5 cover glass</td></tr><tr><td>Image Processing Toolbox for MATLAB, version 10.0</td><td>Mathworks</td><td>&amp;nbsp;</td><td>&amp;nbsp;</td></tr><tr><td>Lectin from Glycine max (soybean)</td><td>Merck</td><td>L1395</td><td>for cell immobilization on slides</td></tr><tr><td>MATLAB software, version 9.2</td><td>Mathworks</td><td>&amp;nbsp;</td><td>&amp;nbsp;</td></tr><tr><td>Microscope slide, 26 mm x 76 mm, 1 mm thickness</td><td>Knittel Glass</td><td>L762601.2</td><td>use any microscope slide fitting your microscope stage, clean thoroughly before loading cells</td></tr><tr><td>Olympus CellR microscope with automatic z-axis objective movement</td><td>Olympus</td><td>&amp;nbsp;</td><td>or equivalent</td></tr><tr><td>Pentaband filter set</td><td>Semrock</td><td>F66-985</td><td>brightfield, green and blue channels are sufficient</td></tr><tr><td>Signal Processing Toolbox for MATLAB, version 7.4</td><td>Mathworks</td><td>&amp;nbsp;</td><td>&amp;nbsp;</td></tr><tr><td>SP supplements</td><td>Formedium</td><td>PSU0101</td><td>&amp;nbsp;</td></tr><tr><td>Standard office computer capable of running MATLAB</td><td>&amp;nbsp;</td><td>&amp;nbsp;</td><td>&amp;nbsp;</td></tr><tr><td>Statistics and Machine Learning Toolbox for MATLAB, version 11.1</td><td>Mathworks</td><td>&amp;nbsp;</td><td>&amp;nbsp;</td></tr><tr><td>Universal peptone M66 for microbiology</td><td>Merck</td><td>1070431000</td><td>&amp;nbsp;</td></tr><tr><td>UPLSAPO 60XO objective</td><td>Olympus</td><td>&amp;nbsp;</td><td>or equivalent</td></tr><tr><td>Yeast extract</td><td>Formedium</td><td>YEA03</td><td>&amp;nbsp;</td></tr><tr><td>Yeast nitrogen base without amino acids</td><td>Formedium</td><td>CYN0405</td><td>&amp;nbsp;</td></tr></tbody></table>

analysis of lipid droplet content in fission and budding yeasts using automated image processing

Lipid metabolism and its regulation are of interest to both basic and applied life sciences and biotechnology. In this regard, various yeast species are used as models in lipid metabolic research or for industrial lipid production. Lipid droplets are highly dynamic storage bodies and their cellular content represents a convenient readout of the lipid metabolic state. Fluorescence microscopy is a method of choice for quantitative analysis of cellular lipid droplets, as it relies on widely available equipment and allows analysis of individual lipid droplets. Furthermore, microscopic image analysis can be automated, greatly increasing overall analysis throughput. Here, we describe an experimental and analytical workflow for automated detection and quantitative description of individual lipid droplets in three different model yeast species: the fission yeasts Schizosaccharomyces pombe and Schizosaccharomyces japonicus, and the budding yeast Saccharomyces cerevisiae. Lipid droplets are visualized with BODIPY 493/503, and cell-impermeable fluorescent dextran is added to the culture media to help identify cell boundaries. Cells are subjected to 3D epifluorescence microscopy in green and blue channels and the resulting z-stack images are processed automatically by a MATLAB pipeline. The procedure outputs rich quantitative data on cellular lipid droplet content and individual lipid droplet characteristics in a tabular format suitable for downstream analyses in major spreadsheet or statistical packages. We provide example analyses of lipid droplet content under various conditions that affect cellular lipid metabolism.

The whole procedure is summarized in Figure 1 for the fission yeasts (the budding yeast workflow is analogous), and below we provide examples of how the workflow can be used to study LD content in three different yeast species under various conditions known to affect cellular LD content. Each example represents a single biological experiment.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/59889/59889fig01v2.jpg" /><br /...

Watch this Scientific Journal Video about Analysis of Lipid Droplet Content in Fission and Budding Yeasts using Automated Image Processing at JoVE.com

Analysis of Lipid Droplet Content in Fission and Budding Yeasts using Automated Image Processing

Here, we present a MATLAB implementation of automated detection and quantitative description of lipid droplets in fluorescence microscopy images of fission and budding yeast cells.

Lipid metabolism and its regulation are of interest to both basic and applied life sciences and biotechnology. In this regard, various yeast species are ...

analysis-lipid-droplet-content-fission-budding-yeasts-using-automated

Research

JoVE Journal

Immunology and Infection

7.9K Views.  Charles University. Dit protocol vergemakkelijkt kwantitatieve kleinschalige analyses van cellulaire opslag lipide inhoud in een verscheidenheid van gist soorten en doet dit op een onpartijdige en gestandaardiseerde manier. De techniek maakt een snelle verwerking van microscopischkleine beelden mogelijk en biedt gedetailleerde kwantitatieve outputs om gemakkelijk monsters te vergelijken, zoals verschillende mutanten en cellen die onder uiteenlopende omstandigheden worden geteeld. Om te beginnen, volg mee in het ...

Video: Analysis of Lipid Droplet Content in Fission and Budding Yeasts using Automated Image Processing

Single Molecule Fluorescence In Situ Hybridization (smFISH) Analysis in Budding Yeast Vegetative Growth and Meiosis

Single molecule fluorescence in situ hybridization (smFISH) is a powerful technique to study gene expression in single cells due to its ability to detect and count individual RNA molecules. Complementary to deep sequencing-based methods, smFISH provides information about the cell-to-cell variation in transcript abundance and the subcellular localization of a given RNA. Recently, we have used smFISH to study the expression of the gene&#160;NDC80&#160;during meiosis in budding yeast, in which two transcript isoforms exist and the short transcript isoform has its entire sequence shared with the long isoform. To confidently identify each transcript isoform, we optimized known smFISH protocols and obtained high consistency and quality of smFISH data for the samples acquired during budding yeast meiosis. Here, we describe this optimized protocol, the criteria that we use to determine whether high quality of smFISH data is obtained, and some tips for implementing this protocol in&#160;other yeast strains and growth conditions.

Single Molecule Fluorescence In Situ Hybridization smFISH Analysis in Budding Yeast Vegetative Growth and Meiosis

This single molecule fluorescence in situ hybridization protocol is optimized to quantify the number of RNA molecules in budding yeast during vegetative growth and meiosis.

Single molecule fluorescence in situ hybridization (smFISH) is a powerful technique to study gene expression in single cells due to its ability to detect ...

Genetics

Lipid Index Determination by Liquid Fluorescence Recovery in the Fungal Pathogen Ustilago Maydis

The article shows how to implement the LD index assay, which is a sensitive microplate assay to determine the accumulation of triacylglycerols (TAGs) in lipid droplets (LDs). LD index is obtained without lipid extraction. It allows measuring the LDs content in high-throughput experiments under different conditions such as growth in rich or nitrogen depleted media. Albeit the method was described for the first time to study the lipid droplet metabolism in Saccharomyces cerevisiae, it was successfully applied to the basidiomycete Ustilago maydis. Interestingly, and because LDs are organelles phylogenetically conserved in eukaryotic cells, the method can be applied to a large variety of cells, from yeast to mammalian cells. The LD index is based on the liquid fluorescence recovery assay (LFR) of the BODIPY 493/503 under quenching conditions, by the addition of cells fixed with formaldehyde. Potassium iodine is used as a fluorescence quencher. The ratio between the fluorescence and the optical density slopes is named LD index. Slopes are calculated from the straight lines obtained when BODIPY fluorescence and optical density at 600 nm (OD600) are plotted against sample addition. Optimal data quality is reflected by correlation coefficients equal or above 0.9 (r &#8805; 0.9). Multiple samples can be read simultaneously as it can be implemented in a microplate. Since BODIPY 493/503 is a lipophilic fluorescent dye that partitions into the lipid droplets, it can be used in many types of cells that accumulate LDs.

Lipid Index Determination by Liquid Fluorescence Recovery in the Fungal Pathogen Ustilago Maydis

Here, we describe a protocol to obtain the lipid droplet index (LD index) to study the dynamics of triacylglycerols in cells cultured in high-throughput experiments. The LD index assay is an easy and reliable method that uses BODIPY 493/503. This assay does not need dispendious lipid extraction or microscopy analysis.

The article shows how to implement the LD index assay, which is a sensitive microplate assay to determine the accumulation of triacylglycerols (TAGs) in ...

Biochemistry

Isolation of Cellular Lipid Droplets: Two Purification Techniques Starting from Yeast Cells and Human Placentas

Lipid droplets are dynamic organelles that can be found in most eukaryotic and certain prokaryotic cells. Structurally, the droplets consist of a core of neutral lipids surrounded by a phospholipid monolayer. One of the most useful techniques in determining the cellular roles of droplets has been proteomic identification of bound proteins, which can be isolated along with the droplets. Here, two methods are described to isolate lipid droplets and their bound proteins from two wide-ranging eukaryotes: fission yeast and human placental villous cells. Although both techniques have differences, the main method - density gradient centrifugation -&#160;is shared by both preparations. This shows the wide applicability of the presented droplet isolation techniques.

In the first protocol, yeast cells are converted into spheroplasts by enzymatic digestion of their cell walls. The resulting spheroplasts are then gently lysed in a loose-fitting homogenizer. Ficoll is added to the lysate to provide a density gradient, and the mixture is centrifuged three times. After the first spin, the lipid droplets are localized to the white-colored floating layer of the centrifuge tubes along with the endoplasmic reticulum (ER), the plasma membrane, and vacuoles. Two subsequent spins are used to remove these other three organelles. The result is a layer that has only droplets and bound proteins.

In the second protocol, placental villous cells are isolated from human term placentas by enzymatic digestion with trypsin and DNase I. The cells are homogenized in a loose-fitting homogenizer. Low-speed and medium-speed centrifugation steps are used to remove unbroken cells, cellular debris, nuclei, and mitochondria. Sucrose is added to the homogenate to provide a density gradient and the mixture is centrifuged to separate the lipid droplets from the other cellular fractions.

The purity of the lipid droplets in both protocols is confirmed by Western Blot analysis. The droplet fractions from both preps are suitable for subsequent proteomic and lipidomic analysis.

Two techniques for isolating cellular lipid droplets from 1) yeast cells and 2) human placentas are presented. The centerpiece of both procedures is density gradient centrifugation, where the resulting floating layer containing the droplets can be readily visualized by eye, extracted, and quantified by Western Blot analysis for purity.

Lipid droplets are dynamic organelles that can be found in most eukaryotic and certain prokaryotic cells. Structurally, the droplets consist of a core of ...

Bioengineering

Quantitative Analysis of the Cellular Lipidome of Saccharomyces Cerevisiae Using Liquid Chromatography Coupled with Tandem Mass Spectrometry

Lipids are structurally diverse amphipathic molecules that are insoluble in water. Lipids are essential contributors to the organization and function of biological membranes, energy storage and production, cellular signaling, vesicular transport of proteins, organelle biogenesis, and regulated cell death. Because the budding yeast Saccharomyces cerevisiae is a unicellular eukaryote amenable to thorough molecular analyses, its use as a model organism helped uncover mechanisms linking lipid metabolism and intracellular transport to complex biological processes within eukaryotic cells. The availability of a versatile analytical method for the robust, sensitive, and accurate quantitative assessment of major classes of lipids within a yeast cell is crucial for getting deep insights into these mechanisms. Here we present a protocol to use liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) for the quantitative analysis of major cellular lipids of S. cerevisiae. The LC-MS/MS method described is versatile and robust. It enables the identification and quantification of numerous species (including different isobaric or isomeric forms) within each of the 10 lipid classes. This method is sensitive and allows identification and quantitation of some lipid species at concentrations as low as 0.2 pmol/&#181;L. The method has been successfully applied to assessing lipidomes of whole yeast cells and their purified organelles. The use of alternative mobile phase additives for electrospray ionization mass spectrometry in this method can increase the efficiency of ionization for some lipid species and can be therefore used to improve their identification and quantitation.

Quantitative Analysis of the Cellular Lipidome of Saccharomyces Cerevisiae Using Liquid Chromatography Coupled with Tandem Mass Spectrometry

We present a protocol using liquid chromatography coupled with tandem mass spectrometry to identify and quantify major cellular lipids in Saccharomyces cerevisiae. The described method for a quantitative assessment of major lipid classes within a yeast cell is versatile, robust, and sensitive.

Lipids are structurally diverse amphipathic molecules that are insoluble in water. Lipids are essential contributors to the organization and function of ...

A Quantitative Assessment of The Yeast Lipidome using Electrospray Ionization Mass Spectrometry

Lipids are one of the major classes of biomolecules and play important roles membrane dynamics, energy storage, and signalling1-4. The budding yeast Saccharomyces cerevisiae, a genetically and biochemically manipulable unicellular eukaryote with annotated genome and very simple lipidome, is a valuable model for studying biological functions of various lipid species in multicellular eukaryotes2,3,5. S. cerevisiae has 10 major classes of lipids with chain lengths mainly of 16 or 18 carbon atoms and either zero or one degree of unsaturation6,7. Existing methods for lipid identification and quantification - such as high performance liquid chromatography, thin-layer chromatography, fluorescence microscopy, and gas chromatography followed by MS - are well established but have low sensitivity, insufficiently separate various molecular forms of lipids, require lipid derivitization prior to analysis, or can be quite time consuming. Here we present a detailed description of our experimental approach to solve these inherent limitations by using survey-scan ESI/MS for the identification and quantification of the entire complement of lipids in yeast cells. The described method does not require chromatographic separation of complex lipid mixtures recovered from yeast cells, thereby greatly accelerating the process of data acquisition. This method enables lipid identification and quantification at the concentrations as low as g/ml and has been successfully applied to assessing lipidomes of whole yeast cells and their purified organelles. Lipids extraction from whole yeast cells for using this method of lipid analysis takes two to three hours. It takes only five to ten minutes to run each sample of extracted and dried lipids on a Q-TOF mass spectrometer equipped with a nano-electrospray source.

We describe a new quantitative lipidomics method for identifying numerous lipid species in yeast using survey-scan electrospray ionization mass spectrometry (ESI/MS). This method exceeds currently available methods for lipid identification and quantification in the ability to resolve various molecular forms of lipids, sensitivity, and speed.

Lipids are one of the major classes of biomolecules and play important roles membrane dynamics, energy storage, and signalling1-4. The budding yeast ...

Biology

Analysis of the Development of a Morphological Phenotype as a Function of Protein Concentration in Budding Yeast

Gene deletion and protein overexpression are common methods for studying functions of proteins. In this article, we describe a protocol for analysis of phenotype development as a function of protein concentration at population and single-cell levels in Saccharomyces cerevisiae. Although this protocol is based on the overexpression of a protein, it can easily be adapted for morphological phenotypes dependent on suppression of protein expression. Our lab is interested in studying the signaling properties of the endocytic adaptor protein epsin. To that purpose we used a dominant negative approach in which we over-expressed the conserved Epsin N-Terminal Homology (ENTH) domain in order to interfere with the functions of endogenous epsin-2 (Ent2 or YLR206W). We observed that overexpression of the ENTH domain of Ent2 (ENTH2) in wild type cells led to a cell division defect that is dependent on the mislocalization of a family of scaffolding proteins, septins.

Gene deletion and protein overexpression are common methods for studying functions of proteins. In this article, we describe a protocol for analysis of phenotype development as a function of protein concentration at population and single-cell levels in Saccharomyces cerevisiae.

Gene deletion and protein overexpression are common methods for studying functions of proteins. In this article, we describe a protocol for analysis of ...

Exploring the Regulation of Lipid Droplet Catabolism through Lipophagy

Macroautophagy, commonly referred to as autophagy, is a highly conserved cellular process responsible for the degradation of cellular components. This process is particularly prominent under conditions such as fasting, cellular stress, organelle damage, cellular damage, or aging of cellular components. During autophagy, a segment of the cytoplasm is enclosed within double-membrane vesicles known as autophagosomes, which then fuse with lysosomes. Following this fusion, the contents of autophagosomes undergo non-selective bulk degradation facilitated by lysosomes. However, autophagy also exhibits selective functionality, targeting specific organelles, including mitochondria, peroxisomes, lysosomes, nuclei, and lipid droplets (LDs). Lipid droplets are enclosed by a phospholipid monolayer that isolates neutral lipids from the cytoplasm, protecting cells from the harmful effects of excess sterols and free fatty acids (FFAs). Autophagy is implicated in various conditions, including neurodegenerative diseases, metabolic disorders, and cancer. Specifically, lipophagy -- the autophagy-dependent degradation of lipid droplets -- plays a crucial role in regulating intracellular FFA levels across different metabolic states. This regulation supports essential processes such as membrane synthesis, signaling molecule formation, and energy balance. Consequently, impaired lipophagy increases cellular vulnerability to death stimuli and contributes to the development of diseases such as cancer. Despite its significance, the precise mechanisms governing lipid droplet metabolism regulated by lipophagy in cancer cells remain poorly understood. This article aims to describe confocal imaging acquisition and quantitative imaging analysis protocols that enable the investigation of lipophagy associated with metabolic changes in cancer cells. The results obtained through these protocols may shed light on the intricate interplay between autophagy, lipid metabolism, and cancer progression. By elucidating these mechanisms, novel therapeutic targets may emerge for combating cancer and other metabolic-related diseases.

Lipophagy is a selective form of autophagy that involves the degradation of lipid droplets. Dysfunctions in this process are associated with cancer development. However, the precise mechanisms are not yet fully understood. This protocol describes quantitative imaging approaches to better understand the interplay between autophagy, lipid metabolism, and cancer progression.

Macroautophagy, commonly referred to as autophagy, is a highly conserved cellular process responsible for the degradation of cellular components. This ...

Cancer Research

Microscopy of Fission Yeast Sexual Lifecycle

The fission yeast Schizosaccharomyces pombe has been an invaluable model system in studying the regulation of the mitotic cell cycle progression, the mechanics of cell division and cell polarity. Furthermore, classical experiments on its sexual reproduction have yielded results pivotal to current understanding of DNA recombination and meiosis. More recent analysis of fission yeast mating has raised interesting questions on extrinsic stimuli response mechanisms, polarized cell growth and cell-cell fusion. To study these topics in detail we have developed a simple protocol for microscopy of the entire sexual lifecycle. The method described here is easily adjusted to study specific mating stages. Briefly, after being grown to exponential phase in a nitrogen-rich medium, cell cultures are shifted to a nitrogen-deprived medium for periods of time suited to the stage of the sexual lifecycle that will be explored. Cells are then mounted on custom, easily built agarose pad chambers for imaging. This approach allows cells to be monitored from the onset of mating to the final formation of spores.

We provide a reproducible basic method for the long-term microscopy of the fission yeast sexual lifecycle. With minor adjustments described, the presented protocol allows research focus on different steps of the reproductive process.

The fission yeast Schizosaccharomyces pombe has been an invaluable model system in studying the regulation of the mitotic cell cycle progression, the ...

4D Microscopy of Yeast

The goal of this protocol is to characterize how membrane compartments form and transform in live cells of budding yeast. Many intracellular compartments in yeast are dynamic, and a full understanding of their properties requires time-lapse imaging. Multi-color 4D confocal fluorescence microscopy is a powerful method for tracking the behavior and composition of an intracellular compartment on a time scale of 5-15 min. Rigorous analysis of compartment dynamics requires the capture of thousands of optical sections. To achieve this aim, photobleaching and phototoxicity are minimized by scanning rapidly at very low laser power, and the pixel dimensions and Z-step intervals are set to the largest values that are compatible with sampling the image at full resolution. The resulting 4D data sets are noisy but can be smoothed by deconvolution. Even with high quality data, the analysis phase is challenging because intracellular structures are often numerous, heterogeneous, and mobile. To meet this need, custom ImageJ plugins were written to array 4D data on a computer screen, identify structures of interest, edit the data to isolate individual structures, quantify the fluorescence time courses, and make movies of the projected Z-stacks. 4D movies are particularly useful for distinguishing stable compartments from transient compartments that turn over by maturation. Such movies can also be used to characterize events such as compartment fusion, and to test the effects of specific mutations or other perturbations.

This protocol describes the analysis of fluorescently labeled intracellular compartments in budding yeast using multi-color 4D (time-lapse 3D) confocal microscopy. The imaging parameters are chosen to capture adequate signals while limiting photodamage. Custom ImageJ plugins allow labeled structures to be tracked and quantitatively analyzed.

The goal of this protocol is to characterize how membrane compartments form and transform in live cells of budding yeast. Many intracellular compartments ...

Examination of Mitotic and Meiotic Fission Yeast Nuclear Dynamics by Fluorescence Live-cell Microscopy

Live-cell imaging is a microscopy technique used to examine cell and protein dynamics in living cells. This imaging method is not toxic, generally does not interfere with cell physiology, and requires minimal experimental handling. The low levels of technical interference enable researchers to study cells across multiple cycles of mitosis and to observe meiosis from beginning to end. Using fluorescent tags such as Green Fluorescent Protein (GFP) and Red Fluorescent Protein (RFP), researchers can analyze different factors whose functions are important for processes like transcription, DNA replication, cohesion, and segregation. Coupled with data analysis using Fiji (a free, optimized ImageJ version), live-cell imaging offers various ways of assessing protein movement, localization, stability, and timing, as well as nuclear dynamics and chromosome segregation. However, as is the case with other microscopy methods, live-cell imaging is limited by the intrinsic properties of light, which put a limit to the resolution power at high magnifications, and is also sensitive to photobleaching or phototoxicity at high wavelength frequencies. However, with some care, investigators can bypass these physical limitations by carefully choosing the right conditions, strains, and fluorescent markers to allow for the appropriate visualization of mitotic and meiotic events.

Here, we present live-cell imaging which is a non-toxic microscopy method that allows researchers to study protein behavior and nuclear dynamics in living fission yeast cells during mitosis and meiosis.

Live-cell imaging is a microscopy technique used to examine cell and protein dynamics in living cells. This imaging method is not toxic, generally does ...

Analysis of Lipid Droplet Content in Fission and Budding Yeasts using Automated Image Processing

Samenvatting

Meer video's verkennen