probing-c84-embedded-si-substrate-using-scanning-probe-microscopy

Probing C<sub>84</sub>-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics

This paper reports an array-designed C84-embedded Si substrate fabricated using a controlled self-assembly method in an ultra-high vacuum chamber. The ...

National Chung Hsing University

Vertical ZnO nanowires were successfully grown on epitaxial ZnO (002) buffer layer/Si (100) substrate. The nanowire growth process was controlled by surface morphology and orientation of the epitaxial ZnO buffer layer, which was deposited by radio-frequency (rf) sputtering. The copper catalyzed the vapor-liquid-solid growth of ZnO nanowires with diameter of approximately 30 nm and length of approximately 5.0 microm. The perfect wurtzite epitaxial structure (HCP structure) of the ZnO (0002) nanowires synthesized on ZnO (002) buffer layer/Si (100) substrate results in excellent optical characteristics such as strong UV emission at 380 nm with potential use in nano-optical and nano-electronic devices.

Fabrication of vertical ZnO nanowires on silicon (100) with epitaxial ZnO buffer layer.

Creating a biocompatible carbon-nanotube polymer scaffold is an area that has a number of potential applications. Herein, a dielectrophoretic approach was pursued to integrate carbon nanotubes into a polymeric material for fabricating a nanoscale composite scaffold with increased and controllable mechanical strength. The adhesion force, which combines the surface energy of the sample and the interfacial energy between the tip and sample, was estimated to be 55.39 +/- 6.72 nN away from the center of the protrusions at a distance of 0.5 microm while being 24.01 +/- 4.45 nN at the center. The adhesion force for the center of the cavities was 42.47 +/- 6.91 and 88.21 +/- 15.05 nN at 0.5 microm away from the center. NIH 3T3 fibroblast cells were then utilized to test the cellular biocompatibility of this multiwalled carbon nanotubes (MWCNTs) film. Cells were cultured on the surface and then their attachment, spreading, and proliferation behaviors were observed. This nanotube-polymer scaffolding approach has a wide range of potential applications including in complex device fabrication as well as in developing biomimetic and tissue engineering scaffolds, and artificial organs.

Controlling the mechanics and nanotopography of biocompatible scaffolds through dielectrophoresis with carbon nanotubes.

This work develops a new process of growing well ordered ZnO nanorods in large scale on the Si(111) substrate. Nanosphere lithography (NSL) was adopted to produce a matrix in an extensive area. A pattern with a controlled amount of gold was formed through the nanosphere mask. The ZnO nanorods were then grown on a patterned Au/Si substrate through a metal catalytic vapor-liquid-solid (VLS) process. The structure and characteristics of ZnO nanorods were investigated by XRD, SEM and TEM. The hexagonal nanorods were dominated at (0002) direction with a lattice constant of approximately 5.03 A. The optoelectronical properties were studied by PL emission spectroscopy. A strong UV emission at 380 nm was observed. The band gap of the single ZnO nanorod was directly measured to be 3.36 eV using a conductive AFM. The superiority of patterned ZnO nanorods indicates their great potential in field emission display arrays.

Patterned fabrication of single ZnO nanorods and measurement of their optoelectrical characteristics.

This study examines the intramolecular structures of individual fullerene molecules on a Si(111)-7 x 7 surface using an ultra-high vacuum scanning tunneling microscope. This study also discusses possible configurations of fullerene molecules with related orientations and electronic states of fullerene. A self-assembled layer of fullerene on a Si(111) surface is produced using special annealing treatments. The resulting electronic states and band gap energy can be estimated from I-V curves. Finally the field emission parameters, such as turn-on field and field enhancement factor beta, are determined using a traditional detecting system.

Mon-Shu Ho

Department of Physics and Institute of Nanoscience

National Chung Hsing University

Probing C₈₄-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics

Mon-Shu Ho

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Physics and Institute of Nanoscience

National Chung Hsing University

Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics

Department of Physics and Institute of Nanoscience

Probing C₈₄-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics