Generation of Induced Pluripotent Stem Cells from Frozen Buffy Coats using Non-integrating Episomal Plasmids

Podsumowanie

Induced pluripotent stem cells (iPSCs) represent a source of patient-specific tissues for clinical applications and basic research. Here, we present a detailed protocol to reprogram human peripheral blood mononuclear cells (PBMNCs) obtained from frozen buffy coats into viral-free iPSCs using non-integrating episomal plasmids.

Streszczenie

Somatic cells can be reprogrammed into induced pluripotent stem cells (iPSCs) by forcing the expression of four transcription factors (Oct-4, Sox-2, Klf-4, and c-Myc), typically expressed by human embryonic stem cells (hESCs). Due to their similarity with hESCs, iPSCs have become an important tool for potential patient-specific regenerative medicine, avoiding ethical issues associated with hESCs. In order to obtain cells suitable for clinical application, transgene-free iPSCs need to be generated to avoid transgene reactivation, altered gene expression and misguided differentiation. Moreover, a highly efficient and inexpensive reprogramming method is necessary to derive sufficient iPSCs for therapeutic purposes. Given this need, an efficient non-integrating episomal plasmid approach is the preferable choice for iPSC derivation. Currently the most common cell type used for reprogramming purposes are fibroblasts, the isolation of which requires tissue biopsy, an invasive surgical procedure for the patient. Therefore, human peripheral blood represents the most accessible and least invasive tissue for iPSC generation.

In this study, a cost-effective and viral-free protocol using non-integrating episomal plasmids is reported for the generation of iPSCs from human peripheral blood mononuclear cells (PBMNCs) obtained from frozen buffy coats after whole blood centrifugation and without density gradient separation.

Wprowadzenie

In 2006, the group of Shinya Yamanaka¹ demonstrated for the first time that somatic cells from adult mice and humans can be converted into a pluripotent state by ectopic expression of four reprogramming factors (Oct-4, Sox-2, Klf-4, and c-Myc), generating the so-called Induced Pluripotent Stem Cells (iPSCs)². Patient-specific iPSCs closely resemble human embryonic stem cells (hESCs) in terms of morphology, proliferation and ability to differentiate into the three-germ cell types (mesoderm, endoderm and ectoderm) while lacking the ethical concerns associated to the use of hESCs and bypassing possible immune rejection³. Thus, iPSCs appear as one of the most important sources of patient-specific cells for basic research, drug screening, disease modeling, evaluation of toxicity, and regenerative medicine purposes⁴.

Several approaches have been used for iPSC generation: viral integrating vectors (retrovirus⁵, lentivirus⁶), viral non-integrating vectors (adenovirus⁷), Sendai-virus⁸, BAC transposons⁹, episomal vectors¹⁰, proteins¹¹ or RNA delivery¹². Although the use of virus-mediated methods can lead to high efficiency reprogramming, viral vectors integrate into the genome of host cells and therefore potential random insertional mutagenesis, permanent alteration of gene expression, and reactivation of silenced transgenes during differentiation cannot be excluded¹³.

To make iPSCs safer for regenerative medicine, efforts have been made to derive iPSCs without the integration of exogenous DNA into cellular genomes. Although excisable viral vectors and transposons have been developed, it is still unclear whether short vector sequences, which inevitably remain in the transduced cells after excision, and transposase expression, could induce alteration in cellular function¹³. Despite its high reprogramming efficiency, Sendai virus represents an expensive approach and reach-through licensing concerns with the company that developed this system have the potential to limit its application in translational studies. Furthermore, the need for direct introduction of proteins and RNA requires multiple delivery of reprogramming molecules with the inherent technical limitations this introduces, and overall reprogramming efficiency is very low¹⁴. Of note, cost-effective viral-free and non-integrating methods based on the use of episomal plasmids have been successfully reported for the reprogramming of skin fibroblasts¹⁵. Specifically, in the present work we decided to use commercial available integration-free episomal plasmids, as previously reported^10,15.

To date, skin fibroblasts represent the most popular donor cell type⁵. However, other cell sources have been successfully reprogrammed into iPSCs including keratinocytes¹⁶, bone marrow mesenchymal stem cells¹⁷, adipose stromal cells¹⁸, hair follicles¹⁹, and dental pulp cells²⁰. The isolation of these cells requires surgical procedures, and several weeks are needed for in vitro cell expansion in order to establish a primary cell culture.

In this light, the selection of starting cell type is critical and it is equally important to be able to produce iPSCs from easily accessible and less invasive tissues such as blood. Both cord blood mononuclear cells (CBMNCs)^21,22 and peripheral blood mononuclear cells (PBMNCs)^14,22-24 represent suitable sources of cells for the derivation of iPSCs.

Although the efficiency of adult PBMNC reprogramming is 20–50 times lower than that of CBMNCs²², they remain the most convenient cell type for sampling purpose. In fact, PBMNC sampling has the advantage of being minimally invasive, and in addition, these cells do not require extensive expansion in vitro before reprogramming experiments. To date, different protocols have reported that PBMNCs after density gradient separation can be frozen and thawed days to several months after freezing and expanded for few days before reprogramming into iPSCs^22,23. Nevertheless, as far as we are aware no reports have described reprogramming of PBMNCs from frozen buffy coats. Importantly, frozen buffy coats collected without density gradient separation represent the most common blood samples stored in large scale biobanks from population studies, thus representing an easily accessible pool of material for iPSC production that avoids further sample collection.

Herein we report for the first time the generation of viral-free iPSCs from human frozen buffy coats, based on a previously described protocol²². In addition, iPSCs were generated from frozen PBMNCs obtained after density gradient separation, as a control protocol for the non-density gradient purified PBMNC results.

Protokół

Peripheral blood mononuclear cells (PBMNCs) were isolated from human peripheral blood samples of healthy donors after signed informed consent and approval of the Ethical Committee of the Province of South Tyrol. Experiments were conducted in accordance with the principles expressed in the Declaration of Helsinki. All data were collected and analyzed anonymously.

1. Isolation of Peripheral Blood Mononuclear Cells (PBMNCs)

1. PBMNCs obtained from buffy coats after whole blood centrifugation, without density gradient separation.
   1. Collect 8 mL of venous peripheral blood into a sodium citrate buffered plastic tube, and store at RT (25 °C). Process blood within 12 hr after collection.
   2. Centrifuge the tube at 2,000 x g for 15 min at 4 °C in a swinging bucket rotor, switching-off the centrifuge brakes.
   3. Collect the cloudy buffy coat (the layer between the upper plasma phase and the lower phase containing most of the erythrocytes), containing the enriched PBMNC fraction (500 µl) into a cryovial tube.
   4. Resuspend 500 µl of buffy coat with 500 µl of 2x freezing medium containing 90% FBS and 20% DMSO, in order to obtain a total volume of 1 ml with 10% DMSO concentration.
   5. Freeze the vial in a controlled-rate freezing container at -80 °C. Store cells in liquid nitrogen for longer periods.
2. PBMNCs obtained after density gradient separation
   1. Collect 12 ml of venous peripheral blood into a sodium citrate buffered plastic tube, and store at RT. Process blood within 12 hr after collection.
   2. Dilute the blood with sterile PBS to a final volume of 35 ml.
   3. Carefully and slowly, layer 35 ml of diluted blood on 15 ml of polysucrose solution (used for density gradient separation) (p = 1.077) in a 50 ml conical tube (ratio 3:1).
   4. Centrifuge the tube at 800 x g for 30 min at RT in a swinging bucket rotor, switching-off the centrifuge brakes.
   5. Aspirate the upper, yellow phase containing plasma and discard it. Carefully, transfer the opaque white interphase layer containing PBMNCs to a new 50 ml conical tube.
   6. Bring total volume to 30 ml with sterile PBS and centrifuge at 300 x g for 10 min at RT.
   7. Discard the supernatant and resuspend the cells with 30 ml of PBS. Count the number of viable cells, based on trypan blue exclusion²⁵.
   8. Centrifuge PBMNCs at 300 x g for 10 min at RT, aspirate the supernatant and discard it.
   9. Resuspend the cell pellet in an appropriate amount of freezing medium containing 90% FBS and 10% DMSO, in order to obtain a concentration of 5 x 10⁶ cells/ml.
   10. Aliquot 1 ml per vial (about 5 x 10⁶ cells/ml) and freeze the vial in a controlled-rate freezing container at – 80 °C. Store cells in liquid nitrogen for longer periods.

2. Thawing and Plating of PBMNCs (DAY 0)

1. PBMNCs obtained from buffy coats after whole blood centrifugation, without density gradient separation.
   1. To start the protocol using PBMNCs from frozen buffy coats, thaw 1 vial of cells in a water bath at 37 °C and dilute the buffy coat with sterile PBS to a final volume of 2 ml.
   2. Transfer the diluted buffy coat into a 50 ml conical tube, add 10 ml of red cell lysis buffer and incubate for 10 min at RT.
   3. To prepare 500 ml of red cell lysis buffer, add 0.5 g of potassium bicarbonate, 4.145 g of ammonium chloride, 100 µl of 0.5 M EDTA solution to 500 ml of ultrapure water, pH 7.2-7.4.
   4. Bring total volume to 50 ml with sterile PBS and centrifuge at 300 x g for 10 min at RT.
   5. Discard the supernatant and wash the pellet with 50 ml of sterile PBS, centrifuge the buffy coat at 300 x g for 10 min at RT.
   6. Resuspend the cells in 1 ml of PBMNC medium, as previously described²², composed of: IMDM and Ham’s F-12 (ratio 1:1), 1% of Insulin-Transferrin-Selenium-Ethanolamine (ITS-X), 1% of Chemically Defined Lipid Concentrate (CDL), 1% Penicillin/Streptomycin, 0.005% of L-ascorbic acid, 0.5% of Bovine Serum Albumin (BSA), 1-Thioglycerol (final concentration 200 µM), Stem Cell Factor SCF (100 ng/ml), Interleukin-3 IL-3 (10 ng/ml), Erythropoietin EPO (2 U/ml), Insulin-like Growth Factor IGF-1 (40 ng/ml), Dexamethasone (1 µM) and holo-transferrin (100 µg/ml).
   7. Transfer them into one well of a 12-well plate with standard tissue culture treated surface, without coating, at a density of 2 x 10⁶ cells/ml. Incubate the cells at 37 °C, 5% CO₂ in a humidified incubator for 48 hr, until the changing medium step (see Section 3).
2. PBMNCs obtained after density gradient separation
   1. To start the protocol using frozen PBMNCs after density gradient separation, thaw 1 vial of cells in a water bath at 37 °C, transfer the cells into 5 ml of PBMNC medium. Centrifuge at 300 x g for 10 min at RT.
   2. Resuspend the cells in 1 ml of PBMNC medium and transfer them into one well of a 12-well plate, at a density of 2 x 10⁶ cells/ml. Incubate the cells at 37 °C, 5% CO₂ in a humidified incubator for 48 hr, until the changing medium step (see Section 3).

3. Culture and Expansion of PBMNCs (DAY 2-13)

1. Collect PBMNCs in suspension culture, using a pipette with a 1 ml tip, in a 15 ml conical tube and centrifuge at 300 x g for 10 min at RT.
2. Discard the supernatant and resuspend the cells in 1 ml of fresh PBMNC medium.
3. Transfer the cells into 1 well of 12-well plate with standard tissue culture treated surface, without coating, and incubate them at 37 °C, 5% CO₂ in a humidified incubator.
4. Repeat these steps every two days, and split the cells at a ratio 1:2 when they reach the appropriate confluence (around 80%).

4. Transfection of PBMNCs with Episomal Plasmids (DAY 14)

Note: Perform the isolation of the four commercial intergation-free episomal plasmids, carrying the pluripotency genes using a commercial kit for plasmid purification and assess the quality of the purified plasmids using an agarose gel analysis, according to the manufacturer’s instructions.

1. Collect PBMNCs in 15 ml conical tube and count the number of viable cells (on the basis of trypan blue exclusion)²⁵.
2. Centrifuge 2 x 10⁶ cells at 300 x g for 10 min at RT.
3. Resuspend 2 x 10⁶ cells in transfection mix containing 100 µl of Resuspension Buffer T and 1 µg of each plasmid DNA (one plasmid carrying OCT3/4 and shRNA against p53, one plasmid carrying SOX2 and KLF4, one plasmid carrying L-MYC and LIN28, and one plasmid carrying EGFP, to check the transfection efficiency).
4. Aspirate the transfection mix containing the cells into a 100 µl tip and insert the pipette with the sample vertically into the tube, filled with 3 ml of Electrolytic Buffer E2, placed in the pipette station of electroporation machine, according to manufacturer’s instructions.
5. Efficiently electroporate cells using the following program: 1,650 V, 10 msec, 3 pulses.
6. Resuspend the electroporated cells (2 x 10⁶ cells) into 2 ml of pre-warmed PBMNC medium, adding 0.25 mM Sodium Butyrate (NaB) and count the number of viable cells after electroporation protocol (on the basis of trypan blue exclusion)²⁵.
7. Transfer the cells into one well of a 6-well plate without coating, gently rock the plate and incubate the cells at 37 °C, 5% CO₂ in a humidified incubator.
8. The day after electroporation, count the number of GFP-positive cells under fluorescence microscopy from 8-10 random fields, in order to assess the transfection efficiency.
9. Maintain the transfected cells without splitting for 3 days, until plating them on MEFs (see Section 6).
10. Replace 2 ml of fresh PBMNCs medium, plus 0.25 mM NaB every two days.

5. Prepare Dishes with Feeder-cells for the Co-culture (DAY 16)

1. Coat the wells of a 6-well plate with 1 ml of basement membrane matrix for 15 min at 37 °C and plate Mouse Embryonic Fibroblasts (MEFs) at a density of 2 x 10⁵ cells/well with 2 ml of 10% FBS contained DMEM (MEF medium) one day before passaging the electroporated PBMNCs onto MEF feeder-cells.

6. Plating Transfected PBMNCs onto MEFs (DAY 17-19)

1. Collect PBMNCs in suspension culture, using a pipette with 1 ml tip, in 15 ml conical tube and centrifuge transfected PBMNCs at 300 x g for 10 min at RT.
2. Discard the supernatant and resuspend the pellet in 2 ml of fresh PBMNC medium, plus 0.25 mM NaB.
3. Plate the cells onto MEF-coated 6 well-plate and incubate the cells at 37 °C, 5% CO₂ in a humidified incubator.
4. After two days, aspirate the medium and replace it with 2 ml of iPSC medium composed of knockout DMEM (KO-DMEM), 20% KO-Serum Replacement (KOSR), 1 mM NEAAs, 1% Penicillin/Streptomycin, 20 mM L-Glutamine, 0.1 mM β-mercaptoethanol, 10 ng/ml FGF (basic bFGF) and 0.25 mM NaB.
5. Replace 2 ml of fresh iPSC medium every day and check the cells daily.
   Note: At about day 22-25, the first colonies of iPSCs should be visible.

7. Picking and Expansion of Induced Pluripotent Stem Cells (iPSCs) Clones (DAY 30-35)

Note: At about 30-35 days after transfection, iPSC colonies should be ready for the picking and replating. The reprogramming efficiency should be estimated as the percentage of number of iPSC colonies/total number of electroporated cells, as previously reported²⁶.

1. The day before passaging iPSC colonies, prepare the MEF feeder in a 12-well plate (1.25 x 10⁵ cells/well).
2. Aspirate the MEF medium and change with 1 mL of iPSC medium with 10 ng/ml bFGF and 10 µM Y-27632. Manually dissect with a needle one colony at each time under the dissecting microscope in the picking-hood in order to obtain a grid, collect smaller clumps by pipetting and transfer them individually each into one well of 12-well plate coated with MEFs.
3. Passage and expand each 12-well plate to a 6-well plate in a ratio 1:2, then each 6-well plate in a ratio 1:4 for further propagation. Dissect and expand iPSCs manually for the first 2-3 passages (as thoroughly described in step 7.2), then use an enzyme dissociation procedure (start from step 7.4).
4. For an enzyme dissociation protocol, clean iPSC colonies by aspirating differentiated portions, under the dissecting microscope in the picking-hood.
5. Incubate iPSCs with 1 ml of collagenase IV (1 mg/ml) for 10 min at 37 °C.
6. Aspirate the enzyme solution, rinse the cells with 1 ml of KO-DMEM and collect the colonies in a 15 ml conical tube. Centrifuge at 100 x g for 2 min at RT.
7. Aspirate the supernatant, resuspend the colonies in 2 ml of iPSC medium with 10 ng/ml bFGF and 10 µM Y-27632 and plate them on MEF-coated 6-well plate (ratio 1:4).

8. Characterization of iPSCs (Between 5-15 Passages)

1. Alkaline Phosphatase Staining
   1. Culture the iPSC colonies for 3-5 days in iPSC medium with 10 ng/ml bFGF.
   2. For starting an alkaline phosphatase staining protocol, rinse iPSCs once with PBS and then fix them with 1 ml of 4% PFA for 20 min at RT.
   3. Wash the cells three times with PBS, to remove residual PFA.
   4. Stain fixed cells using a commercial alkaline phosphatase staining kit according to the manufacturer’s instructions.
2. Immunofluorescence
   1. Culture the iPSC colonies for 3-5 days in iPSC medium with 10 ng/ml bFGF.
   2. To start an immunofluorescence assay, wash iPSCs once with PBS and then fix them with 1 ml of 4% PFA for 20 min at RT.
   3. Wash the cells three times with PBS, to remove residual PFA.
   4. Treat fixed iPSCs with 1 ml of permeabilization/blocking solution containing 4% goat serum, 0.1% BSA, 0.1% Triton X-100 and 0.05% sodium azide (NaN₃) for 1 hr at RT.
   5. Aspirate the blocking solution and incubate the fixed cells with primary antibodies in 3% BSA and 0.05% NaN₃ solution O/N at 4 °C (check the material table for primary antibody list and suggested antibody dilution factor).
   6. The next day, wash iPSCs three times with PBS, then incubate the cells with Alexa Fluor 488 goat anti-mouse and Alexa Fluor 555 goat anti-rabbit antibodies, diluted 1:1,000 in 3% BSA and 0.05% NaN₃ solution, for 1 hr at 37 °C.
   7. Stain the nuclei with DAPI (1µg/ml) for 10 min at RT in dark, followed by three time washing with PBS.
3. Differentiation of iPSCs in Embryoid Bodies (EBs)
   1. Culture the iPSC colonies for 5-6 days in iPSC medium with 10 ng/ml bFGF.
   2. Remove differentiated portions from iPSC colonies by aspirating, under the dissecting microscope in the picking-hood.
   3. Incubate iPSCs with 1 ml of collagenase IV (1 mg/ml) for 10 min at 37 °C.
   4. Aspirate the enzyme solution, rinse the cells with 1 ml of KO-DMEM and collect the colonies in a 15 ml conical tube. Centrifuge at 100 x g for 2 min at RT.
   5. Aspirate the supernatant and resuspend the colonies in 2 ml of EB medium composed of KO-DMEM, 20% defined fetal bovine serum (FBS), 1 mM NEAAs, 1% Penicillin/Streptomycin, 20 mM L-Glutamine, 0.1 mM β-mercaptoethanol.
   6. Plate iPSC colonies in suspension for 6 days onto ultra-low attachment 6-well plates, in order to allow the formation of spheroidal three-dimensional embryoid bodies (EBs). Change 2 ml of fresh EB medium every two days.
   7. On day 7, collect EBs and plate them onto 0.1% gelatin coated 6-well plates in 2 ml of EB medium and maintain EBs in differentiation for 20 days.
   8. Change 2 ml of fresh EB medium every two days.
4. qRT-PCR for Gene Expression Analysis
   1. Culture the iPSC colonies for 5-6 days in iPSC medium with 10 ng/ml bFGF.
   2. Extract total RNA from PBMNCs, iPSCs or EBs using 1 ml of commercial reagent in accordance with manufacturer’s instructions.
   3. Evaluate RNA concentration and purity by suitable methods such as use of a spectrophotometer (high quality RNA with A₂₆₀/A₂₈₀ and A₂₆₀/A₂₃₀ ratios > 1.8)²⁷.
   4. Check RNA integrity using a commercial kit according to manufacturer’s protocol (high quality RNA RQI >9.5)²⁸.
   5. Perform a reverse transcription reaction on 1 µg of total RNA using a commercial reverse transcriptase kit according to manufacturer’s instructions.
   6. Prepare the qPCR mixtures containing 5 ng of cDNA template, 7.5 µl SYBR GREEN Supermix, 2 µl of 5 µM primers (forward: 1 µl and reverse: 1 µl) and 6 µl of RNase/DNase-free water for each reaction²⁹.
   7. Perform the qRT-PCR using the following program: an initial denaturation step at 95 °C for 10 min, followed by 40 cycles divided into a denaturation step at 95 °C for 15 sec and primer annealing and extension step at 60°C for 45 sec²⁹.
   8. Normalize the expression of other genes using GAPDH as housekeeping gene²⁸ (see the primers listed in Table 1).
5. qPCR for Transgene Exclusion
   1. Extract DNA from PBMNCs or iPSCs using 1 ml of lysis buffer containing 50 mM Tris, 100 mM EDTA, 100 mM NaCl, 1% Sodium Dodecyl Sulphate (SDS) and 20 µg/ml Proteinase K.
   2. Add an equal volume (1 ml) of 100% isopropanol, mix by inversion three times in order to allow DNA precipitation and centrifuge at 10,000 x g for 5 min at RT.
   3. Discard the supernatant, wash the DNA pellet with 1 ml of 70% ethanol and centrifuge at 10,000 x g for 5 min at RT. Aspirate and discard the supernatant and resuspend it in RNase/DNase-free water.
   4. Evaluate DNA concentration and purity by suitable methods such as use of a spectrophotometer (high quality RNA with A₂₆₀/A₂₈₀ and A₂₆₀/A₂₃₀ ratios >1.8)²⁷.
   5. Prepare the qPCR mixtures containing 5 ng of DNA template, 7.5 µl SYBR GREEN Supermix, 2 µl of 5 µM primers (forward: 1 µl and reverse: 1 µl) and 6 µl of RNase/DNase-free water for each reaction²⁹.
   6. Normalize the expression of specific episomal plasmid EBNA-1 gene using FBX-15 as housekeeping gene²⁹(see the primers listed in Table 1).
6. Karyotype Analysis
   1. Culture the iPSC colonies for 5-6 days onto feeder-free basement membrane matrix coated plate with a commercial defined, feeder-free maintenance medium for iPSCs, following manufacturer’s instructions.
   2. To start the karyotype analysis protocol, detach iPSC colonies with 1 ml of cell detachment solution for 5 min at 37 °C, until obtaining single-cell dissociation.
   3. Collect cells and centrifuge at 400 x g for 5 min at RT.
   4. Resuspend iPSCs in 2 ml of a medium specifically developed for culturing cells for prenatal diagnostic techniques. Plate single-cell iPSCs onto basement membrane matrix coated glass dishes and incubate them in a 37 °C, 5% CO₂ incubator.
   5. After 2-4 days, add 10 µl/ml colchicine directly to the cultures and incubate for 3 hr at 37 °C, 5% CO₂ in a humidified incubator.
   6. Aspirate the medium and incubate iPSCs in 1 ml of a hypotonic solution (0.6% sodium citrate and 0.13% potassium chloride) for 10 min at RT.
   7. Rinse cells with 1 ml of 5% acetic acid solution and fix iPSCs with methanol/acetic acid solution (ratio 3:1) in a machine with controlled temperature and humidity (28 °C, 42% rH).
   8. Immerse and stain fixed cells with Quinacrine solution for 15-20 min at RT in dark (to obtain Q-banding)³⁰.
   9. Acquire cell metaphases under a fluorescence microscope at 100X magnification²⁹.

Wyniki

In this study a simple and effective protocol for the generation of viral-free iPSCs by reprogramming of PBMNCs isolated from frozen buffy coats after whole blood centrifugation and comparison with reprogramming of PBMNCs obtained after density gradient separation is reported. Figure 1A shows a schematic representation of the detailed protocol. After thawing, the isolated PBMNCs, showing a typical rounded shape, are expanded in specific blood culture medium for 14 days (Figure 1B) and th...

Dyskusje

In the past, the only way to obtain human pluripotent stem cells carrying a particular genetic mutation was to recruit parents undergoing pre-implantation genetic diagnosis and generate embryonic stem cells from their discarded blastocysts^31,32. Using a reprogramming approach, researchers can now generate iPSCs from patients carrying virtually any genotype. The possibility to start from a patient-specific cell line and an easily accessible source is very important since it allows an investigation of the pathop...

Materiały

Name	Company	Catalog Number	Comments
Sodium Citrate buffered Venosafe Plastic Tube	Terumo	VF-054SBCS07
Ammodium chloride	Sigma-Aldrich	A9434
Potassium bicarbonate	Sigma-Aldrich	60339
EDTA disodium powder	Sigma-Aldrich	E5134	0.5 M solution
Ficoll-Paque Premium	GE Healthcare Life Sciences	17-5442-02	Polysucrose solution for density gradient centrifugation
Iscove's modified Dulbecco's medium (IMDM)	Gibco	21056-023	No phenol red
Ham's F-12	Mediatech	10-080-CV
Insulin-Transferrin-Selenium-Ethanolamine (ITS -X)	Gibco	51500-056	1X (Stock: 100X)
Chemically Defined Lipid Concentrate	Gibco	11905031	1X (Stock: 100X)
Bovine Serum Albumin (BSA)	Sigma-Aldrich	A9418
L-Ascorbic acid 2-phosphate sesquimagnesium salt hydrate	Sigma-Aldrich	A8960
1-Thioglycerol	Sigma-Aldrich	M6145	Final Concentration at 200 µM
Recombinant Human Stem Cell Factor (SCF)	PeproTech	300-07	100 ng/ml (Stock:100 µg/ml)
Recombinant Human Interleukin-3 (IL-3)	PeproTech	200-03	10 ng/ml (Stock: 10 µg/ml)
Recombinant Human Insulin-like Growth Factor (IGF-1)	PeproTech	100-11	40 ng/ml (Stock: 40 µg/ml)
Recombinant Human Erythropoietin (EPO)	R&D Systems	287-TC-500	2 U/ml (Stock: 50 U/ml)
Dexamethasone	Sigma-Aldrich	D2915	1 μM (Stock: 1 mM)
Human Holo-Transferrin	R&D Systems	2914-HT	100 μg/ml (Stock: 20 mg/ml)
Amniomax II	Gibco	11269016	Medium for cytogenetic analysis
mTeSR1	StemCell Technologies	5850	Medium for iPSC feeder-free culture
Knockout DMEM	Gibco	10829-018
Knockout Serum Replacement	Gibco	10828-028
Penicillin-Streptomycin (10,000 U/mL)	Gibco	15140-122
L-Glutamine (200 mM)	Gibco	25030-024
MEM Non-Essential Amino Acids Solution (100X)	Gibco	11140-050
2-Mercaptoethanol	Gibco	31350-010	0.1 mM (Stock: 50 mM)
Sodium Butyrate	Sigma-Aldrich	B5887	0.25 mM (Stock: 0.5 M)
Recombinant Human FGF basic, 145 aa	R&D Systems	4114-TC	10 ng/ml (Stock: 10 µg/ml)
Y-27632 dihydrochloride	Sigma-Aldrich	Y0503	10 µM (Stock: 10 mM)
Fetal Defined Bovine Serum	Hyclone	SH 30070.03
EmbryoMax 0.1% Gelatin Solution	Merck-Millipore	ES-006-B
Matrigel Basement Membrane Matrix Growth Factor Reduced	BD Biosciences	354230
Collagenase, Type IV	Gibco	17104-019	1 mg/ml (Stock: 10 mg/ml)
Accutase	PAA Laboratories GmbH	L11-007	Cell detachment solution
Mouse Embryonic Fibroblast (CF1)	Global Stem	GSC-6201G	1*106 cells/6 well plate
Plasmid pCXLE-hOCT3/4-shp53-F	Addgene	27077	1 µg (Stock: 1 µg/µl)
Plasmid pCXLE-hSK	Addgene	27078	1 µg (Stock: 1 µg/µl)
Plasmid pCXLE-hUL	Addgene	27080	1 µg (Stock: 1 µg/µl)
Plasmid pCXLE-EGFP	Addgene	27082	1 µg (Stock: 1 µg/µl)
Alkaline Phosphatase Staining Kit	Stemgent	00-0009
Anti-Stage-Specific Embryonic Antigen-4 (SSEA-4) Antibody	Merck-Millipore	MAB4304	1/250
Anti-TRA-1-60 Antibody	Merck-Millipore	MAB4360	1/250
Anti-TRA-1-81 Antibody	Merck-Millipore	MAB4381	1/250
Anti-Oct-3/4 Antibody	Santa Cruz Biotechnology	sc-9081	1/500
Anti-Nanog Antibody	Santa Cruz Biotechnology	sc-33759	1/500
Anti-Troponin I Antibody	Santa Cruz Biotechnology	sc-15368	1/500
Anti-α-Actinin (Sarcomeric) Antibody	Sigma-Aldrich	A7732	1/250
Neuronal Class III ß-Tubulin (TUJ1) Antibody	Covance Research Products Inc	MMS-435P-100	1/500
Anti-Tyrosine Hydroxylase (TH) Antibody	Calbiochem	657012	1/200
Alexa Fluor 488 Goat Anti-Mouse	Molecular Probes	A-11029	1/1000
Alexa Fluor 555 Goat Anti-Rabbit	Molecular Probes	A-21429	1/1000
Ultra-Low Attachment Cell Culture 6-well plate	Corning	3471
Trizol Reagent	Ambion	15596-018	reagent for RNA extraction
SuperScript VILO cDNA Synthesis Kit	Invitrogen	11754050	Reverse transcriptase kit
iTaq Universal SYBR Green Supermix	Bio-Rad	172-5124
CFX96 Real-Time PCR Detection System	Bio-Rad	185-5195
Experion Automated Electrophoresis System	Bio-Rad	700-7000	Instrument to check RNA integrity
Experion RNA Highsense Analysis kit	Bio-Rad	7007105	Reagent kit to check RNA integrity
Dissecting microscope (SteREO Discovery V12 )	Zeiss	495007
NeonTransfection System 100 µl Kit	Invitrogen	MPK10025	Reagent kit for electroporation
Neon Transfection System	Invitrogen	MPK5000	Instrument used for electroporation
NanoDrop UV/Vis Spectrophotometer	Thermo Scientific	ND-2000	Instrument for DNA/RNA quantification
EndoFree Plasmid Maxi Kit	Qiagen	12362	Plasmid purification kit