2.4K Views
•
07:20 min
•
January 20th, 2023
DOI :
January 20th, 2023
•Rozdziały w tym wideo
0:04
Introduction
1:00
Preparation of Half‐Cut TEM Grids with Coated Si Nanoparticles for Checking the Suitability of ALD‐Deposited Titanium Dioxide Coatings
1:53
Preparing the Tungsten Needle
2:37
Loading the Drop‐Casted TEM Grid and Lithium Loaded Tungsten Needle into the In Situ TEM Holder
3:15
Inserting the Assembled In Situ Holder into the TEM
4:02
Performing the In Situ Biasing Experiment in the TEM and Analyzing the TEM Images
5:37
Results: Screening Method of Potential Coatings for All‐Solid‐State Batteries Using In Situ Transmission Electron Microscopy
6:28
Conclusion
Powiązane Filmy
Preparation of Highly Porous Coordination Polymer Coatings on Macroporous Polymer Monoliths for Enhanced Enrichment of Phosphopeptides
10.0K Views
In Situ Monitoring of Diffusion of Guest Molecules in Porous Media Using Electron Paramagnetic Resonance Imaging
6.3K Views
In Situ Characterization of Boehmite Particles in Water Using Liquid SEM
9.1K Views
Liquid-cell Transmission Electron Microscopy for Tracking Self-assembly of Nanoparticles
12.6K Views
Obtaining 3D Chemical Maps by Energy Filtered Transmission Electron Microscopy Tomography
6.4K Views
Microfluidic Chips for In Situ Crystal X-ray Diffraction and In Situ Dynamic Light Scattering for Serial Crystallography
14.6K Views
Analysis of Minerals Produced by hFOB 1.19 and Saos-2 Cells Using Transmission Electron Microscopy with Energy Dispersive X-ray Microanalysis
9.0K Views
Using Graphene Liquid Cell Transmission Electron Microscopy to Study in Situ Nanocrystal Etching
16.9K Views
Performing Spectroscopy on Plasmonic Nanoparticles with Transmission-Based Nomarski-Type Differential Interference Contrast Microscopy
7.5K Views
Preparation of Graphene-Supported Microwell Liquid Cells for In Situ Transmission Electron Microscopy
9.9K Views
Copyright © 2025 MyJoVE Corporation. Wszelkie prawa zastrzeżone