A voltage doubler circuit integrates two main components: a clamping section and a rectifier section. The clamping section consists of a capacitor (C1) and a diode (D1), whereas the rectifier section is equipped with another diode (D2) and capacitor (C2). This circuit produces an output voltage with twice the amplitude of the sinusoidal input voltage.

Figure 1

The circuit begins to operate when a sinusoidal input is introduced to the clamping section. Under ideal conditions, this section outputs a voltage waveform across diode D1, effectively clamping the positive peaks at zero volts and permitting the negative peak to achieve a magnitude that is twice that of the sinusoidal input's amplitude. This transformed waveform from the clamping section, then feeds into the rectifier section. Here, a remarkable transformation occurs, yielding a DC voltage across capacitor C2. This voltage mirrors twice the amplitude of the initial sinusoidal input providing the doubling effect that gives the circuit its name and marks its primary function.

The principle behind the voltage doubler is not only confined to doubling but can also be adapted to multiply the input voltage by higher factors, broadening its application scope. Voltage doublers are pivotal in various fields, finding their usage in scientific instruments, enhancing signal processing techniques, and serving as essential components in DC-DC converters within numerous electronic gadgets. This capability to efficiently double the voltage makes the voltage doubler circuit a cornerstone in electronic design and application.

Tags
Voltage DoublerClamping SectionRectifier SectionCapacitorDiodeSinusoidal InputDC VoltageVoltage MultiplicationElectronic DesignDC DC ConverterScientific InstrumentsSignal Processing

Do Capítulo 11:

article

Now Playing

11.13 : Voltage Doubler Circuit

Diodes

292 Visualizações

article

11.1 : The Ideal Diode

Diodes

452 Visualizações

article

11.2 : Diode: Forward bias

Diodes

651 Visualizações

article

11.3 : Diode: Reverse bias

Diodes

361 Visualizações

article

11.4 : Zener Diodes

Diodes

255 Visualizações

article

11.5 : Modeling of Diode Forward Characteristics

Diodes

352 Visualizações

article

11.6 : Small-signal Diode Model

Diodes

526 Visualizações

article

11.7 : Modeling of Diode Reverse Characteristics

Diodes

171 Visualizações

article

11.8 : Half wave rectifier

Diodes

417 Visualizações

article

11.9 : Full wave rectifier

Diodes

421 Visualizações

article

11.10 : Bridge rectifier

Diodes

320 Visualizações

article

11.11 : Clipper Circuit

Diodes

235 Visualizações

article

11.12 : Clamper Circuit

Diodes

276 Visualizações

article

11.14 : Schottky Barrier Diode

Diodes

187 Visualizações

JoVE Logo

Privacidade

Termos de uso

Políticas

Pesquisa

Educação

SOBRE A JoVE

Copyright © 2025 MyJoVE Corporation. Todos os direitos reservados