Parts of this work, i.e. the study on QC and correction for corrupted gradient directions in application to data of patients with hyperkinetic disorders, were supported by the European HD network (EHDN project 070). The MRI scans in this certain study were acquired as part of the London site TRACK-HD cohort.

Analysis Methods: Pre- and Postprocessing
The task of the following protocol is to analyze diffusion properties voxelwise within white matter tracts which could be - due to the voxelwise detection - either isotropic or anisotropic, resulting in prolate or oblate diffusion tensors for the respective voxels. The parameterization of the voxel tensors is used for either the calculation of FA-maps or the identification of fibertracts (Figure 1).
In order t...

Authors have nothing to disclose.

Inter-subject averaging of DTI data can be achieved with respect to diffusion amplitude (by use of FA information) and diffusion direction (based upon FT), respectively. Averaging of FA maps allows for the statistical comparison of subject groups by WBSS and TFAS. This methodological framework gives an introduction to DTI techniques with inter-subject averaging and group comparison. Stereotaxic normalization and comparison of FA maps at the group level allows for several possibilities to quantify differences between subj...

Diffusion tensor imaging in the human brain
The white matter (WM) tracts in the central nervous system consist of densely packed axons in addition to various types of neuroglia and other small populations of cells. The axonal membrane as well as the well-aligned protein fibers within an axon restricts water diffusion perpendicular to the fiber orientation, leading to anisotropic water diffusion in brain WM 1. Myelin sheaths around the axons may also contribute to the anisotropy for both intra- and extracellular water 2.
The quantitative description of this anisotropy could be detected by diffusion tensor imaging (DTI). DTI produces images of tissues weighted with the local microstructural characteristics of water diffusion. The image-intensities at each position are attenuated, depending on the strength and direction of the so-called magnetic diffusion gradient (represented in the b-value), as well as on the local microstructure in which the water molecules diffuse 3, the diffusion coefficient D, a scalar value:
<img alt="Equation 1" fo:src="/files/ftp_upload/50427/50427eq1highres.jpg" src="/files/ftp_upload/50427/50427eq1.jpg" /> 
However, in the presence of anisotropy in WM, diffusion can no longer be characterized by a single scalar coefficient, but requires a tensor <img alt="Equation 3" fo:src="/files/ftp_upload/50427/50427eq3highres.jpg" src="/files/ftp_upload/50427/50427eq3.jpg" /> which in first approximation describes molecular mobility along each direction and correlation between these directions 4. Diffusion anisotropy is mainly caused by the orientation of fiber tracts in WM and is influenced by its micro- and macrostructural features. Of the microstructural features, intraaxonal organization appears to be of greatest influence on diffusion anisotropy, besides the density of fiber and cell packing, degree of myelination, and individual fiber diameter. On a macroscopic scale, the variability in the orientation of all WM tracts in an imaging voxel influences its degree of anisotropy 5.
In typical DTI measurements, the voxel dimensions are in the order of millimeters. Thus, a voxel always contains the averaged information of the water molecules inside the detected volume that usually covers several axons as well as the surrounding water molecules. Despite this multidirectional environment, DTI is sensitive to the orientation of the largest principal axis which aligns to the predominant axonal direction, i.e. the axonal contribution dominates the measured signal 2.
DTI provides two types of information about the property of water diffusion: first, the orientation-independent extent of diffusion anisotropy 5 and second, the predominant direction of water diffusion in image voxels, i.e. the diffusion orientation 6.
The current protocols are supposed to provide a framework of DTI analysis techniques for quantitative comparison of subject groups at the group level, as outlined in the following.
Quantification of diffusion properties - analysis parameters
The elements of the symmetric tensor can be measured by diffusion gradients along at least six non-collinear and non-coplanar directions so that b (Equation 1) has become a tensor, resulting in signal attenuation
<img alt="Equation 2" fo:src="/files/ftp_upload/50427/50427eq2highres.jpg" src="/files/ftp_upload/50427/50427eq2.jpg" /> 
This equation requires accounting for possible interactions between imaging and diffusion gradients that are applied in orthogonal directions (cross terms) and even between imaging gradients that are applied in orthogonal directions 4.
The second-rank diffusion tensor <img alt="Equation 3" fo:src="/files/ftp_upload/50427/50427eq3highres.jpg" src="/files/ftp_upload/50427/50427eq3.jpg" /> can always be diagonalized leaving only three non-zero elements along the main diagonal of the tensor, i.e. the Eigenvalues (<img alt="Equation 4" fo:src="/files/ftp_upload/50427/50427eq4highres.jpg" src="/files/ftp_upload/50427/50427eq4.jpg" /> ). The Eigenvalues reflect the shape or configuration of the ellipsoid. The mathematical relationship between the principal coordinates of the ellipsoid and the laboratory frame is described by the Eigenvectors <img alt="Equation 5" fo:src="/files/ftp_upload/50427/50427eq5highres.jpg" src="/files/ftp_upload/50427/50427eq5.jpg" />
Since there are several challenges in displaying tensor data, the concept of diffusion ellipsoids has been proposed 3. The Eigendiffusivities of these ellipsoids represent the unidimensional diffusion coefficients in the main direction of diffusivities of the medium, i.e. the main axis of the ellipsoid represents the main diffusion direction in the voxel which coincides with the direction of the fibers, while the eccentricity of the ellipsoid provides information about the degree of anisotropy and its symmetry. Therefore, diffusion anisotropy metrics such as the fractional anisotropy (FA) could be defined 7.
<img alt="Equation 6" fo:src="/files/ftp_upload/50427/50427eq6highres.jpg" src="/files/ftp_upload/50427/50427eq6.jpg" /> 
<img alt="Equation 7" fo:src="/files/ftp_upload/50427/50427eq7highres.jpg" src="/files/ftp_upload/50427/50427eq7.jpg" /> is the arithmetic average of all Eigenvalues.
An additional approach is to use the principal direction of the diffusion tensor to address the WM connectivity of the brain, corresponding to the tractography approach which has the intention to investigate which parts of the brain are connected to each other. Assuming that the orientation of the major component of the diffusion tensor represents the orientation of the dominant axonal tracts, a 3-D vector field is provided in which each vector represents the fiber orientation. Currently, there are several different approaches to reconstruct WM tracts which could be divided into two types: the first category is based on line propagation algorithms using the local tensor information for each step of the fiber tract propagation 2,8,9. The second category is based on global energy minimization to find the energetically most favorable path between two WM regions, resulting in the approach of tract-based spatial statistics (TBSS) 10 which has been used in other algorithms such as tractwise fractional anisotropy statistics (TFAS - see protocol text, section 2.4.).
Transformation into stereotaxic standard space
Like in other advanced MRI methods, DTI- and FT-based studies in a clinical context pursue the ultimate goal to categorize individual patient's brain morphology in order to facilitate the diagnostic process based on some discrimination metric 11. Studies at the group level are most relevant if the common clinical phenotype is supposed to be due to damage to one or more specific brain areas or a specific neuroanatomical network. Here, averaging of results for different subjects is useful in order to assess common patterns of microstructural alterations. Each individual brain has to be transferred into stereotaxic space so that, in a second step, the arithmetic averaging of the results at a voxel-by-voxel level is possible. Spatial normalization allowed for arithmetic averaging of the results obtained from different subjects in order to improve the signal-to-noise ratio (SNR) and to perform a comparison of samples of patients and controls in order to analyze the computational pathoanatomy of a specific disorder, e.g. a neurodegenerative disease which is associated with the affectation of a specific brain system.
The early approach of normalization to a standardized stereotaxic space by 12 suggested a transformation algorithm to a standard atlas involving the identification of various brain landmarks and piecemeal scaling of brain quadrants. Nowadays, most of the advanced MRI data analysis packages use normalization to the Montreal Neurological Institute (MNI) stereotaxic space 13. For this transformation, semiautomatic and automated brain registration algorithms using study specific templates were developed 14,15. In DTI, special attention has to be drawn to preserve the directional information during the normalization process 16,17. The application of spatial transformations to DT-MR images which are required for spatial normalization of collections of data sets is, in contrast to warping scalar images, complicated by the fact that DTs contain orientational information which is again affected by the transformation. This effect must be accounted for in order to ensure the anatomical correctness of the transformed image. Here, techniques for applying affine transformations to DTI data sets are presented.
Application of DTI to brain diseases
The comparison of longitudinal DTI data requires an alignment/registration of one subject's data among each other. In that context, preservation of the directional information is necessary (i.e. rotation of the diffusion tensor during affine transformations). Possible applications to neurodegenerative disorders have been reported previously (e.g. 18,19).
DTI has been established as a robust non-invasive technical tool to investigate in vivo neuropathology of WM neuronal tracts (e.g. 11,20,21,22). DTI-based quantitative metrics of the diffusion process, e.g. the FA, have already been shown to be sensitive markers for studying a wide range of WM pathologies, such as stroke 20, multiple sclerosis 23, amyotrophic lateral sclerosis 24, 25, Alzheimer's disease 26, and several other WM disorders 27,28.
Additionally, DTI with FT can be used to identify WM tracts 23. This technique, while still not in routine clinical use, is emerging as a powerful instrument for the assessment of pathway-specific abnormalities in neurological disease. Within the identified tracts, various quantitative MRI indices derived from DTI and additional acquisitions (e.g. T2-weighted images and/or magnetization transfer (MT) imaging) that are anatomically coregistered to the DTI data could be measured. Hereby, each index could be calculated as a function of position within the tract, referring to plots depicting their spatial variation as tract profiles.
In the following, human DTI scans which were performed on 1.5 Tesla MRI-scanners (Siemens Medical, Erlangen, Germany) were used to investigate the potential of various analysis techniques for detecting white matter abnormalities in patient groups as well as in individuals. After an automated quality check for the elimination of motion-corrupted volumes and volumes with other kinds of artifacts, standardized postprocessing procedures prepare the DTI data for the consecutive analysis. Different analysis approaches will be illustrated in the following, i.e. first, whole brain based spatial statistics (WBSS), second, FT, and third, Tractwise fractional anisotropy statistics (TFAS). WBSS is a method that runs in analogy to voxel-based morphometry (VBM) which is usually known as voxel-based morphometry/statistics on DTI data (VBM/DTI). VBM is a method that originally runs on contrast images where contrast differences in separate scans have to be resolved while WBSS is a method that uses the voxelwise comparison of a physical parameter. Therefore, although algorithmically similar, a terminology which is differentiating WBSS and VBM will be used in the following.

<table border="1">
 <tbody>
 <tr>
 <td>MR scanner</td>
 <td></td>
 <td></td>
 <td>Siemens 1.5 T Magnetom Symphony</td>
 </tr>
 <tr>
 <td>analysis software </td>
 <td></td>
 <td></td>
 <td>TIFT - Tensor Imaging and Fiber Tracking</td>
 </tr>
 </tbody>
 </table>

diffusion tensor magnetic resonance imaging in the analysis of neurodegenerative diseases

Diffusion tensor imaging (DTI) techniques provide information on the microstructural processes of the cerebral white matter (WM) in vivo. The present applications are designed to investigate differences of WM involvement patterns in different brain diseases, especially neurodegenerative disorders, by use of different DTI analyses in comparison with matched controls. 	
DTI data analysis is performed in a variate fashion, i.e. voxelwise comparison of regional diffusion direction-based metrics such as fractional anisotropy (FA), together with fiber tracking (FT) accompanied by tractwise fractional anisotropy statistics (TFAS) at the group level in order to identify differences in FA along WM structures, aiming at the definition of regional patterns of WM alterations at the group level. Transformation into a stereotaxic standard space is a prerequisite for group studies and requires thorough data processing to preserve directional inter-dependencies. The present applications show optimized technical approaches for this preservation of quantitative and directional information during spatial normalization in data analyses at the group level. On this basis, FT techniques can be applied to group averaged data in order to quantify metrics information as defined by FT. Additionally, application of DTI methods, i.e. differences in FA-maps after stereotaxic alignment, in a longitudinal analysis at an individual subject basis reveal information about the progression of neurological disorders. Further quality improvement of DTI based results can be obtained during preprocessing by application of a controlled elimination of gradient directions with high noise levels.	
In summary, DTI is used to define a distinct WM pathoanatomy of different brain diseases by the combination of whole brain-based and tract-based DTI analysis.

1. QC and correction for corrupted gradient directions in application to data of patients with hyperkinetic disorders
As an example for the effect of the application of QC and subsequent volume exclusion (as a consequence from the correction for corrupted GD), Figure 8 shows differences in whole brain based spatial statistics with and without volume exclusion for group comparison of 29 premanifest Huntington's disease subjects vs. 30 age and gender matched controls. The scanning ...

Watch this Scientific Journal Video about Diffusion Tensor Magnetic Resonance Imaging in the Analysis of Neurodegenerative Diseases at JoVE.com

Diffusion Tensor Magnetic Resonance Imaging in the Analysis of Neurodegenerative Diseases

Diffusion tensor imaging (DTI) basically serves as an MRI-based tool to identify in vivo the microstructure of the brain and pathological processes due to neurological disorders within the cerebral white matter. DTI-based analyses allow for application to brain diseases both at the group level and in single subject data.

Diffusion tensor imaging (DTI) techniques provide information on the microstructural processes of the cerebral white matter (WM) in vivo. The present ...

diffusion-tensor-magnetic-resonance-imaging-analysis

Research

JoVE Journal

Medicine

28.0K visualizações.  University of Ulm. Tensor de difusão (DTI), basicamente, serve como uma ferramenta baseada em ressonância magnética para identificar In vivo A microestrutura do cérebro e processos patológicos devido a desordens neurológicas dentro da matéria branca cerebral. Análises baseadas DTI permite a aplicação de doenças cerebrais, tanto ao nível do grupo e em Dados sujeitos individuais.