Name: using in vitro fluorescence resonance energy transfer to study the dynamics of protein complexes at a millisecond time scale
Uploaded: 2019-03-14T14:30:00
Description: Watch this Scientific Journal Video about Using In Vitro Fluorescence Resonance Energy Transfer to Study the Dynamics Of Protein Complexes at a Millisecond Time Scale at JoVE.com

We thank Shu-Ou Shan (California Institute of Technology) for insightful discussion on the development of the FRET assay. M.G., Y.Z., and X.L. were funded by startup funds from Purdue University to Y.Z. and X.L.This work was supported in part by a seed grant from Purdue University Center for Plant Biology.

1. Design the FRET assay.
<ol>
	<li>Download the structure file of the Cul1&#8226;Cand1 complex from the Protein Data Bank (file 1U6G).</li>
	<li>View the structure of the Cul1&#8226;Cand1 complex in PyMOL.</li>
	<li>Use the Measurement function under the Wizard menu of PyMOL to estimate the distance between the first amino acid of Cand1 and the last amino acid of Cul1 (Figure 1).</li>
	<li>Load the online spectra viewer (see Table of Materials</st...

<ol>
	<li>Stumpf, M. P. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Estimating+the+size+of+the+human+interactome.">Estimating the size of the human interactome.</a> Proceedings of the National Academy of Sciences of the United States of America. 105 (19), 6959-6964 (2008).</li><li>Kuzmanov, U., Emili, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein-protein+interaction+networks:+probing+disease+mechanisms+using+model+systems.">Protein-protein interaction networks: probing disease mechanisms using model systems.</a> Genome Medicine. 5 (4), 37 (2013).</li><li>Titeca, K., Lemmens, I., Tavernier, J., Eyckerman, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Discovering+cellular+protein-protein+interactions:+Technological+strategies+and+opportunities.">Discovering cellular protein-protein interactions: Technological strategies and opportunities.</a> Mass Spectrometry Reviews. , 1-33 (2018).</li><li>Lapetina, S., Gil-Henn, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+guide+to+simple,+direct,+and+quantitative+in+vitro+binding+assays.">A guide to simple, direct, and quantitative in vitro binding assays.</a> Journal of Biological Methods. 4 (1), 62 (2017).</li><li>Zheng, X., Bi, C., Li, Z., Podariu, M., Hage, D. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analytical+methods+for+kinetic+studies+of+biological+interactions:+A+review.">Analytical methods for kinetic studies of biological interactions: A review.</a> Journal of Pharmaceutical and Biomedical Analysis. 113, 163-180 (2015).</li><li>Pierce, N. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cand1+promotes+assembly+of+new+SCF+complexes+through+dynamic+exchange+of+F+box+proteins.">Cand1 promotes assembly of new SCF complexes through dynamic exchange of F box proteins.</a> Cell. 153 (1), 206-215 (2013).</li><li>Liu, X., Reitsma, J. M., Mamrosh, J. L., Zhang, Y., Straube, R., Deshaies, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cand1-Mediated+Adaptive+Exchange+Mechanism+Enables+Variation+in+F-Box+Protein+Expression.">Cand1-Mediated Adaptive Exchange Mechanism Enables Variation in F-Box Protein Expression.</a> Molecular Cell. 69 (5), 773-786 (2018).</li><li>Zheng, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+of+the+Cul1-Rbx1-Skp1-F+boxSkp2+SCF+ubiquitin+ligase+complex.">Structure of the Cul1-Rbx1-Skp1-F boxSkp2 SCF ubiquitin ligase complex.</a> Nature. 416 (6882), 703-709 (2002).</li><li>Kleiger, G., Deshaies, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tag+Team+Ubiquitin+Ligases.">Tag Team Ubiquitin Ligases.</a> Cell. 166 (5), 1080-1081 (2016).</li><li>Zheng, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CAND1+binds+to+unneddylated+CUL1+and+regulates+the+formation+of+SCF+ubiquitin+E3+ligase+complex.">CAND1 binds to unneddylated CUL1 and regulates the formation of SCF ubiquitin E3 ligase complex.</a> Molecular Cell. 10 (6), 1519-1526 (2002).</li><li>Hwang, J. W., Min, K. W., Tamura, T. A., Yoon, J. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=TIP120A+associates+with+unneddylated+cullin+1+and+regulates+its+neddylation.">TIP120A associates with unneddylated cullin 1 and regulates its neddylation.</a> FEBS Letters. 541 (1-3), 102-108 (2003).</li><li>Min, K. W., Hwang, J. W., Lee, J. S., Park, Y., Tamura, T., Yoon, J. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=TIP120A+associates+with+cullins+and+modulates+ubiquitin+ligase+activity.">TIP120A associates with cullins and modulates ubiquitin ligase activity.</a> Journal of Biological Chemistry. 278 (18), 15905-15910 (2003).</li><li>Goldenberg, S. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+of+the+Cand1-Cul1-Roc1+complex+reveals+regulatory+mechanisms+for+the+assembly+of+the+multisubunit+cullin-dependent+ubiquitin+ligases.">Structure of the Cand1-Cul1-Roc1 complex reveals regulatory mechanisms for the assembly of the multisubunit cullin-dependent ubiquitin ligases.</a> Cell. 119 (4), 517-528 (2004).</li><li>Chuang, H. W., Zhang, W., Gray, W. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arabidopsis+ETA2,+an+apparent+ortholog+of+the+human+cullin-interacting+protein+CAND1,+is+required+for+auxin+responses+mediated+by+the+SCF(TIR1)+ubiquitin+ligase.">Arabidopsis ETA2, an apparent ortholog of the human cullin-interacting protein CAND1, is required for auxin responses mediated by the SCF(TIR1) ubiquitin ligase.</a> Plant Cell. 16 (7), 1883-1897 (2004).</li><li>Feng, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arabidopsis+CAND1,+an+Unmodified+CUL1-Interacting+Protein,+Is+Involved+in+Multiple+Developmental+Pathways+Controlled+by+Ubiquitin/Proteasome-Mediated+Protein+Degradation.">Arabidopsis CAND1, an Unmodified CUL1-Interacting Protein, Is Involved in Multiple Developmental Pathways Controlled by Ubiquitin/Proteasome-Mediated Protein Degradation.</a> the Plant Cell Online. 16 (7), 1870-1882 (2004).</li><li>Cheng, Y., Dai, X., Zhao, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AtCAND1,+a+HEAT-repeat+protein+that+participates+in+auxin+signaling+in+Arabidopsis.">AtCAND1, a HEAT-repeat protein that participates in auxin signaling in Arabidopsis.</a> Plant Physiology. 135 (June), 1020-1026 (2004).</li><li>Lo, S. -. C., Hannink, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CAND1-Mediated+Substrate+Adaptor+Recycling+Is+Required+for+Efficient+Repression+of+Nrf2+by+Keap1.">CAND1-Mediated Substrate Adaptor Recycling Is Required for Efficient Repression of Nrf2 by Keap1.</a> Molecular and Cellular Biology. 26 (4), 1235-1244 (2006).</li><li>Okamoto, K., Sako, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+FRET+for+the+study+of+protein+interactions+and+dynamics.">Recent advances in FRET for the study of protein interactions and dynamics.</a> Current Opinion in Structural Biology. 46, 16-23 (2017).</li><li>Hussain, S. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+introduction+to+fluorescence+resonance+energy+transfer+(FRET).">An introduction to fluorescence resonance energy transfer (FRET).</a> arXiv preprint. , (2009).</li><li>Li, T., Pavletich, N. P., Schulman, B. A., Zheng, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-level+expression+and+purification+of+recombinant+SCF+ubiquitin+ligases.">High-level expression and purification of recombinant SCF ubiquitin ligases.</a> Methods in Enzymology. 398 (1996), 125-142 (2005).</li><li>Popp, M. W., Antos, J. M., Grotenbreg, G. M., Spooner, E., Ploegh, H. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sortagging:+A+versatile+method+for+protein+labeling.">Sortagging: A versatile method for protein labeling.</a> Nature Chemical Biology. 3 (11), 707-708 (2007).</li><li>Antos, J. M., Ingram, J., Fang, T., Pishesha, N., Truttmann, M. C., Ploegh, H. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Site-Specific+Protein+Labeling+via+Sortase-Mediated+Transpeptidation.">Site-Specific Protein Labeling via Sortase-Mediated Transpeptidation.</a> Current Protocols in Protein Science. 89, (2017).</li><li>Froger, A., Hall, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transformation+of+Plasmid+DNA+into+E.+coli+Using+the+Heat+Shock+Method.">Transformation of Plasmid DNA into E. coli Using the Heat Shock Method.</a> Journal of Visualized Experiments. , (2007).</li><li>Simpson, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=SDS-PAGE+of+Proteins.">SDS-PAGE of Proteins.</a> Cold Spring Harbor Protocols. 2006 (1), (2006).</li><li>Kleiger, G., Saha, A., Lewis, S., Kuhlman, B., Deshaies, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+E2-E3+Assembly+and+Disassembly+Enable+Processive+Ubiquitylation+of+Cullin-RING+Ubiquitin+Ligase+Substrates.">Rapid E2-E3 Assembly and Disassembly Enable Processive Ubiquitylation of Cullin-RING Ubiquitin Ligase Substrates.</a> Cell. 139 (5), 957-968 (2009).</li><li>Biro, F. N., Zhai, J., Doucette, C. W., Hingorani, M. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Application+of+Stopped-flow+Kinetics+Methods+to+Investigate+the+Mechanism+of+Action+of+a+DNA+Repair+Protein.">Application of Stopped-flow Kinetics Methods to Investigate the Mechanism of Action of a DNA Repair Protein.</a> Journal of Visualized Experiments. (37), 2-8 (2010).</li><li>Patel, J. T., Belsham, H. R., Rathbone, A. J., Friel, C. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+Stopped-Flow+Fluorescence+and+Labeled+Nucleotides+to+Analyze+the+ATP+Turnover+Cycle+of+Kinesins.">Use of Stopped-Flow Fluorescence and Labeled Nucleotides to Analyze the ATP Turnover Cycle of Kinesins.</a> Journal of Visualized Experiments. (92), 1-6 (2014).</li><li>Bajar, B. T., Wang, E. S., Zhang, S., Lin, M. Z., Chu, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+guide+to+fluorescent+protein+FRET+pairs.">A guide to fluorescent protein FRET pairs.</a> Sensors (Switzerland). 16 (9), 1-24 (2016).</li><li>Chen, A. K., Cheng, Z., Behlke, M. A., Tsourkas, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessing+the+sensitivity+of+commercially+available+fluorophores+to+the+intracellular+environment.">Assessing the sensitivity of commercially available fluorophores to the intracellular environment.</a> Analytical Chemistry. 80 (19), 7437-7444 (2008).</li><li>Lin, C. T., Rorabacher, D. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mathematical+approach+for+stopped-flow+kinetics+of+fast+second-order+reactions+involving+inhomogeneity+in+the+reaction+cell.">Mathematical approach for stopped-flow kinetics of fast second-order reactions involving inhomogeneity in the reaction cell.</a> Journal of Physical Chemistry. 78 (3), 305-308 (1974).</li><li>Toseland, C. P., Geeves, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+Reaction+Kinetic+Techniques.">Rapid Reaction Kinetic Techniques.</a> Fluorescent Methods for Molecular Motors. , 49-65 (2014).</li><li>Adams, S. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+biarsenical+ligands+and+tetracysteine+motifs+for+protein+labeling+in+vitro+and+in+vivo:+Synthesis+and+biological+applications.">New biarsenical ligands and tetracysteine motifs for protein labeling in vitro and in vivo: Synthesis and biological applications.</a> Journal of the American Chemical Society. 124 (21), 6063-6076 (2002).</li><li>Lin, C. W., Ting, A. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transglutaminase-catalyzed+site-specific+conjugation+of+small-molecule+probes+to+proteins+in+vitro+and+on+the+surface+of+living+cells.">Transglutaminase-catalyzed site-specific conjugation of small-molecule probes to proteins in vitro and on the surface of living cells.</a> Journal of the American Chemical Society. 128 (14), 4542-4543 (2006).</li><li>Yin, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genetically+encoded+short+peptide+tag+for+versatile+protein+labeling+by+Sfp+phosphopantetheinyl+transferase.">Genetically encoded short peptide tag for versatile protein labeling by Sfp phosphopantetheinyl transferase.</a> Proceedings of the National Academy of Sciences of the United States of America. 102 (44), 15815-15820 (2005).</li><li>Diaspro, A., Chirico, G., Usai, C., Ramoino, P., Dobrucki, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photobleaching.">Photobleaching.</a> Handbook Of Biological Confocal Microscopy. , 690-702 (2006).</li><li>Aoki, K., Kamioka, Y., Matsuda, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fluorescence+resonance+energy+transfer+imaging+of+cell+signaling+from+in+vitro+to+in+vivo:+Basis+of+biosensor+construction,+live+imaging,+and+image+processing.">Fluorescence resonance energy transfer imaging of cell signaling from in vitro to in vivo: Basis of biosensor construction, live imaging, and image processing.</a> Development, Growth &amp; Differentiation. 55 (4), 515-522 (2013).</li><li>Kilic, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single-molecule+FRET+reveals+multiscale+chromatin+dynamics+modulated+by+HP1&#945;.">Single-molecule FRET reveals multiscale chromatin dynamics modulated by HP1&#945;.</a> Nature Communications. 9 (1), (2018).</li><li>Shen, K., Arslan, S., Akopian, D., Ha, T., Shan, S. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Activated+GTPase+movement+on+an+RNA+scaffold+drives+co-translational+protein+targeting.">Activated GTPase movement on an RNA scaffold drives co-translational protein targeting.</a> Nature. 492 (7428), 271-275 (2012).</li><li>Bajar, B. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improving+brightness+and+photostability+of+green+and+red+fluorescent+proteins+for+live+cell+imaging+and+FRET+reporting.">Improving brightness and photostability of green and red fluorescent proteins for live cell imaging and FRET reporting.</a> Scientific Reports. 6 (February), 1-12 (2016).</li></ol>

FRET is a physical phenomenon that is of great interest for studying and understanding biological systems19. Here, we present a protocol for testing and using FRET to study the binding kinetics of two interacting proteins. When designing FRET, we considered three major factors: the spectral overlap between donor emission and acceptor excitation, the distance between the two fluorophores, and the dipole orientation of the fluorophores28. To choose the fluorophores for FRET, ...

Biological activities are ultimately carried out by proteins, most of which interact with others for proper biological functions. Using a computational approach, the total amount of protein-protein interactions in human is estimated to be ~650,0001, and disruption of these interactions often leads to diseases2. Due to their essential roles in controlling cellular and organismal processes, numerous methods have been developed to study protein-protein interactions, such as yeast-two-hybrid, bimolecular fluorescence complementation, split-luciferase complementation, and co-immunoprecipitation assay3. While these methods are good at discovering and confirming protein-protein interactions, they are usually non-quantitative and thus provide limited information about the affinity between the interacting protein partners. Quantitative pull-downs can be used to measure the binding affinity (e.g., the dissociation constant Kd), but it does not measure the kinetics of the binding, nor can it be applied when the Kd is very low due to an inadequate signal-to-noise ratio4. Surface plasmon resonance (SPR) spectroscopy quantifies the binding kinetics, but it requires a specific surface and immobilization of one reactant on the surface, which can potentially change the binding property of the reactant5. Moreover, it is difficult for SPR to measure fast association and dissociation rates5, and it is not appropriate to use SPR to characterize the event of exchanging protein subunits in a protein complex. Here, we describe a method that allows measuring rates of protein complex assembly and disassembly at a millisecond time scale. This method was essential for determining the role of Cullin-associated-Nedd8-dissociated protein 1 (Cand1) as the F-box protein exchange factor6,7.
Cand1 regulates the dynamics of Skp1&#8226;Cul1&#8226;F-box protein (SCF) E3 ligases, which belong to the large family of Cullin-RING ubiquitin ligases. SCFs consist of the cullin Cul1, which binds the RING domain protein Rbx1, and an interchangeable F-box protein, which recruits substrates and binds Cul1 through the adaptor protein Skp18. As an E3 ligase, SCF catalyzes the conjugation of ubiquitin to its substrate, and it is activated when the substrate is recruited by the F-box protein, and when Cul1 is modified by the ubiquitin-like protein Nedd89. Cand1 binds unmodified Cul1, and upon binding, it disrupts both the association of Skp1&#8226;F-box protein with Cul1 and the conjugation of Nedd8 to Cul110,11,12,13. As a result, Cand1 appeared to be an inhibitor of SCF activity in vitro, but Cand1 deficiency in organisms caused defects that suggests a positive role of Cand1 in regulating SCF activities in vivo14,15,16,17. This paradox was finally explained by a quantitative study that revealed the dynamic interactions among Cul1, Cand1, and Skp1&#8226;F-box protein. Using fluorescence resonance energy transfer (FRET) assays that detect the formation of the SCF and Cul1&#8226;Cand1 complexes, the association and dissociation rate constants (kon and koff, respectively) were measured individually. The measurements revealed that both Cand1 and Skp1&#8226;F-box protein form extremely tight complex with Cul1, but the koff of SCF is dramatically increased by Cand1 and the koff of Cul1&#8226;Cand1 is dramatically increased by Skp1&#8226;F-box protein6,7. These results provide the initial and critical support for defining the role of Cand1 as a protein exchange factor, which catalyzes the formation of new SCF complexes through recycling Cul1 from the old SCF complexes.
Here, we present the procedure of developing and using the FRET assay to study the dynamics of the Cul1&#8226;Cand1 complex7, and the same principle can be applied to study the dynamics of various biomolecules. FRET occurs when a donor is excited with the appropriate wavelength, and an acceptor with excitation spectrum overlapping the donor emission spectrum is present within a distance of 10-100 &#197;. The excited state is transferred to the acceptor, thereby decreasing the donor intensity and increasing the acceptor intensity18. The efficiency of FRET (E) depends on both the F&#246;rster radius (R0) and the distance between the donor and acceptor fluorophores (r), and is defined by: E = R06/(R06 + r6). The F&#246;rster radius (R0) depends on a few factors, including the dipole angular orientation, the spectral overlap of the donor-acceptor pair, and the solution used19. To apply the FRET assay on a stopped-flow fluorimeter, which monitors the change of the donor emission in real-time and enables measurements of fast kon and koff, it is necessary to establish efficient FRET that results in a significant reduction of donor emission. Therefore, designing efficient FRET by choosing the appropriate pair of fluorescent dyes and sites on the target proteins to attach the dyes is important and will be discussed in this protocol.

<table>
	<tbody>
		<tr>
			<td>Anion exchange chromatography column</td>
			<td>GE Healthcare</td>
			<td>17505301</td>
			<td>HiTrap Q FF anion exchange chromatography column</td>
		</tr>
		<tr>
			<td>Benchtop refrigerated centrifuge</td>
			<td>Eppendorf</td>
			<td>2231000511</td>
			<td></td>
		</tr>
		<tr>
			<td>BL21 (DE3) Competent Cells</td>
			<td>ThermoFisher Scientific</td>
			<td>C600003</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium Chloride</td>
			<td>Fisher Scientific</td>
			<td>C78-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Cation exchange chromatography column</td>
			<td>GE Healthcare</td>
			<td>17505401</td>
			<td>HiTrap SP Sepharose FF</td>
		</tr>
		<tr>
			<td>Desalting Column</td>
			<td>GE Healthcare</td>
			<td>17085101</td>
			<td></td>
		</tr>
		<tr>
			<td>Floor model centrifuge (high speed)</td>
			<td>Beckman Coulter</td>
			<td>J2-MC</td>
			<td></td>
		</tr>
		<tr>
			<td>Floor model centrifuge (low speed)</td>
			<td>Beckman Coulter</td>
			<td>J6-MI</td>
			<td></td>
		</tr>
		<tr>
			<td>Fluorescence SpectraViewer</td>
			<td>ThermoFisher Scientific</td>
			<td></td>
			<td>https://www.thermofisher.com/us/en/home/life-science/cell-analysis/labeling-chemistry/fluorescence-spectraviewer.html</td>
		</tr>
		<tr>
			<td>FluoroMax fluorimeter</td>
			<td>HORIBA</td>
			<td>FluoroMax-3</td>
			<td></td>
		</tr>
		<tr>
			<td>FPLC</td>
			<td>GE Healthcare</td>
			<td>29018224</td>
			<td></td>
		</tr>
		<tr>
			<td>GGGGAMC peptide</td>
			<td>New England Peptide</td>
			<td>custom synthesis</td>
			<td></td>
		</tr>
		<tr>
			<td>Glutathione beads</td>
			<td>GE Healthcare</td>
			<td>17075605</td>
			<td></td>
		</tr>
		<tr>
			<td>Glycerol</td>
			<td>Fisher Scientific</td>
			<td>G33-500</td>
			<td></td>
		</tr>
		<tr>
			<td>HEPES</td>
			<td>Fisher Scientific</td>
			<td>BP310-100</td>
			<td></td>
		</tr>
		<tr>
			<td>Isopropyl-&#946;-D-thiogalactoside (IPTG)</td>
			<td>Fisher Scientific</td>
			<td>15-529-019</td>
			<td></td>
		</tr>
		<tr>
			<td>LB Broth</td>
			<td>Fisher Scientific</td>
			<td>BP1426-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Ni-NTA agarose</td>
			<td>Qiagen</td>
			<td>30210</td>
			<td></td>
		</tr>
		<tr>
			<td>Ovalbumin</td>
			<td>MilliporeSigma</td>
			<td>A2512</td>
			<td></td>
		</tr>
		<tr>
			<td>pGEX-4T-2 vector</td>
			<td>GE Healthcare</td>
			<td>28954550</td>
			<td></td>
		</tr>
		<tr>
			<td>Protease inhibitor cocktail</td>
			<td>MilliporeSigma</td>
			<td>4693132001</td>
			<td></td>
		</tr>
		<tr>
			<td>Reduced glutathione</td>
			<td>Fisher Scientific</td>
			<td>BP25211</td>
			<td></td>
		</tr>
		<tr>
			<td>Refrigerated shaker</td>
			<td>Eppendorf</td>
			<td>M1282-0004</td>
			<td></td>
		</tr>
		<tr>
			<td>Rosetta Competent Cells</td>
			<td>MilliporeSigma</td>
			<td>70953-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Size exclusion chromatography column</td>
			<td>GE Healthcare</td>
			<td>28990944</td>
			<td>Superdex 200 10/300 GL column</td>
		</tr>
		<tr>
			<td>Sodium Chloride (NaCl)</td>
			<td>Fisher Scientific</td>
			<td>S271-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Stopped-flow fluorimeter</td>
			<td>Hi-Tech Scientific</td>
			<td>SF-61 DX2</td>
			<td></td>
		</tr>
		<tr>
			<td>TCEP&#183;HCl</td>
			<td>Fisher Scientific</td>
			<td>PI20490</td>
			<td></td>
		</tr>
		<tr>
			<td>Thrombin</td>
			<td>MilliporeSigma</td>
			<td>T4648</td>
			<td></td>
		</tr>
		<tr>
			<td>Tris Base</td>
			<td>Fisher Scientific</td>
			<td>BP152-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Ultrafiltration membrane</td>
			<td>MilliporeSigma</td>
			<td>UFC903008</td>
			<td>Amicon Ultra-15 Centrifugal Filter Units, Ultra-15, 30,000 NMWL</td>
		</tr>
	</tbody>
</table>

using in vitro fluorescence resonance energy transfer to study the dynamics of protein complexes at a millisecond time scale

Proteins are the primary operators of biological systems, and they usually interact with other macro- or small molecules to carry out their biological functions. Such interactions can be highly dynamic, meaning the interacting subunits are constantly associated and dissociated at certain rates. While measuring the binding affinity using techniques such as quantitative pull-down reveals the strength of the interaction, studying the binding kinetics provides insights on how fast the interaction occurs and how long each complex can exist. Furthermore, measuring the kinetics of an interaction in the presence of an additional factor, such as a protein exchange factor or a drug, helps reveal the mechanism by which the interaction is regulated by the other factor, providing important knowledge for the advancement of biological and medical research. Here, we describe a protocol for measuring the binding kinetics of a protein complex that has a high intrinsic association rate and can be dissociated quickly by another protein. The method uses fluorescence resonance energy transfer to report the formation of the protein complex in vitro, and it enables monitoring the fast association and dissociation of the complex in real time on a stopped-flow fluorimeter. Using this assay, the association and dissociation rate constants of the protein complex are quantified.

To test the FRET between Cul1AMC and FlAsHCand1, we first determined the emission intensity of 70 nM Cul1AMC (the donor) and 70 nM FlAsHCand1 (the acceptor), respectively (Figure 3A-C, blue lines). In each analysis, only one emission peak was present, and the emission of FlAsHCand1 (the acceptor) was low. When 70 nM each of Cul1AMC and FlAsHCand1 were mixed to genera...

Watch this Scientific Journal Video about Using In Vitro Fluorescence Resonance Energy Transfer to Study the Dynamics Of Protein Complexes at a Millisecond Time Scale at JoVE.com

Using In Vitro Fluorescence Resonance Energy Transfer to Study the Dynamics Of Protein Complexes at a Millisecond Time Scale

Protein-protein interactions are critical for biological systems, and studies of the binding kinetics provide insights into the dynamics and function of protein complexes. We describe a method that quantifies the kinetic parameters of a protein complex using fluorescence resonance energy transfer and the stopped-flow technique. &#160;

Proteins are the primary operators of biological systems, and they usually interact with other macro- or small molecules to carry out their biological ...

Our method helps study the kinetics of a protein complex formation. It describes how tight a protein complex is, and if the protein complex formation is interfered by other proteins. This technique enables studying protein-protein interaction in quantitative way using fluorescence as a reporter, our assay can monitor the association and disassociation of a protein complex in real-time.To begin, design the FRET assay starting with the data for the COL1 CAND1 complex from the protein database. Load the structure in PyMOL, and then go to the wizard menu and use the measurement function to estimate the distance between the first amino acid of CAND1 and the last amino acid of COL1. Then, load the online spectra viewer and view the excitation and emission spectra of 7-amino-4-methylcoumarin and FlASH simultaneously.AMC is the FRET donor and FlASH is the FRET acceptor. Prepare cells with the FRET donor protein by following along in the accompanying text protocol. Then, purify the COL1 sortase RBX1 complex by first adding 50 milliliters of lysis buffer to a pellet of E.Coli cells expressing the COL1 sortase RBX1 complex.Ice the cells on ice with sonication at 50%amplitude. Alternate the power for three minutes so that it is one second on, and then one second off to prevent overheating the sample. Transfer the resulting cell lysate into a 50 milliliter centrifugation tube and remove the cell debris by centrifugation at 25, 000 times g for 45 minutes.Then, add the supernatant to five milliliters of glutathione beads and incubate them at four degrees Celsius to clear the cell lysate. Following incubation, centrifuge the bead lysate mixture at 1, 500 times g for two minutes at four degrees Celsius. Then, remove the supernatant.Next, wash the beads with 5 milliliters of lysis buffer having no protease inhibitor. After centrifuging the solution, remove the supernatant. Now, add three milliliters of lysis buffer to the washed beads and transfer the bead slurry into an empty column.To the new column, also add five milliliters of elution buffer and then incubate the column for 10 minutes and collect the eluate. Next, add 200 microliters of thrombin at five milligrams per milliliter to the eluate from the glutathione beads. Following an overnight incubation at four degrees Celsius dilute the protein sample three fold with buffer A.Load the protein sample to a buffer A equilibrated cationic exchange chromatography column at zero point five milliliters per minute.Then, add a gradient of zero to 50%of buffer B in buffer A to elute the protein with a flow rate of 1 milliliter per minute. Next, pool the eluate fractions containing the FRET donor protein and concentrate it down to two point five milliliters using an ultrafiltration membrane with a 30 kilodalton cutoff. Now, add 7-amino-4-methylcoumarin to the c-terminus of COL1 through sortase mediated transpeptidation by first changing the buffer in the FRET donor protein sample into the sortase buffer using a desalting column.To accomplish this, first equilibrate a desalting column with 25 milliliters of sortase buffer. Then, load two point five milliliters of the FRET donor protein solution into the column and discard the flow through. Next, elute the sample with three point five milliliters of sortase buffer and collect the flow through.In 900 microliters of the eluate, add 100 microliters of 600 micromolar purified sortase A solution and 10 microliters of a 25 millimolar GGGG-AMC peptide. Incubate the reaction mixture at 30 degrees Celsius in the dark overnight to generate COL1-AMC-RBX1. Now, load all of the sample onto the size exclusion chromatography column and elute it with one point five times the column volume of buffer.In the end, pool the eluate fractions containing COL1-AMC-RBX1. Follow along in the text protocol to prepare the FRET acceptor protein. Many of the steps are similar to the FRET donor protein preparation.Once finished, prepare the FlASH CAND1 solution. First, add one microliter of the FlASH solution to 50 microliters of the freshly prepared tetra-cys-CAND1 solution. Mix the combined solutions well and incubate the mixture at room temperature in the dark for one to two hours to form the FlASH CAND1 solution.In 300 microliters of FRET buffer, add COL1-AMC-RBX1 to a final concentration of 70 nanomolar and transfer the solution into a cuvette. Place the cuvette in the sample holder of a fluoriometer. Excite the sample with 350 nanometer excitation light and scan the emission signals from 400 to 600 nanometers at one nanometer increments.Then, in 300 microliters of FRET buffer, add both COL1-AMC-RBX1 and FlASH-CAND1 to a final concentration of 70 nanomolar. Excite the sample with 350 nanometer excitation light and scan the emission signals from 400-600 nanometers at one nanometer increments. Set the excitation light at 350 nanometers and use a band pass filter that allows 450 nanometers emission light to pass and blocks 500 to 650 nanometer emission light.With the sample valves at the fill position connect a three milliliter syringe filled with water. Then, wash the two sample syringes with water by moving the sample syringe drive up and down several times, discarding the water when finished. Next, connect a three milliliter syringe filled with FRET buffer.Wash the two sample syringes with the FRET buffer by moving the sample syringe drive up and down several times, discarding the water when finished. Now, connect a three milliliter syringe and load the first sample syringe, syringe A, with 100 nanomolar COL1-AMC-RBX1 in the FRET buffer. Then turn the sample valve to the drive position Also, connect a three milliliter syringe to syringe B and load syringe B with 100 nanomolar of FlASH CAND1 in the FRET buffer and turn its valve to the drive position.Open the control panel under acquire in the software and record the emission of COL1-AMC over the course of 60 seconds. Then, take a single shot. Fit the decrease and the fluorescent signals measured over time from each shot to a single exponential curve.Wash the system as previously shown and then add a solution of 100 nanomolar COL1-AMC-RBX1 and 100 nanomolar FlASH CAND1 in the FRET buffer into syringe A.Connect it to the system while it is in the fill position Load syringe A and then turn the sample valve to the drive position. Next, load a solution of Skp1-Skp2 into syringe B.Connect it to the system while it is in the fill position. Load syringe B and then turn the sample to the drive position.In the software, go to acquire and open the control panel. Set up the program to record the emission of COL1-AMC over 30 seconds. Then take a single shot.The fluorescence signals increase over time after mixing solutions from syringe A and syringe B.When 70 nanomolar each of COL1-AMC and FlASH CAND1 were mixed to generate FRET, two emission peaks were present in the emission spectra. And the peak of COL1-AMC became lower, and the peak of FlASH CAND1 became higher. When the full length CAND1 was used for FRET the donor peak showed a 10%reduction in intensity.However, when CAND1 with its first helix truncated was used the reduction of donor peak intensity was increased to 30%suggesting higher FRET efficiency To confirm that the signal changes were resulted from FRET between COL1-AMC and FlASH CAND1, the donor FRET was mixed with excess unlabelled CAND1 known as the Chase in the acceptor. As a result the donor peak was fully restored and the acceptor peak was decreased. Shown here is a plot of the average observed K value with the CAND1 concentration following linear regression analysis.To measure the on constant of the complex, 50 nanomolar COL1-AMC was used in a series of observed dissociation rate constants were measured by mixing 50 nanomolar COL1-AMC with increasing concentrations of FlASH CAND1. Similar to the measurement of the on constant, the observed dissociation constant of COL1 and CAND1 was found by monitoring the restoration of the donor signal over time on the stopped flow fluorometer. Here the donor signal increased quickly and it revealed an observed K value of zero point four per second.In contrast, when buffer was added to the pre assembled complex, no signal increase was observed suggesting the fast dissociation of COL1 CAND1 was triggered by Skp1 Skp2. Make sure to minimize the amount of light the donor and acceptor proteins are exposed to. Try to keep fluorophores in the dark as much as possible.

Research

JoVE Journal

Biochemistry

Fluorescence Anisotropy as a Tool to Study Protein-protein Interactions

Protein-protein interactions play an essential role in the function of a living organism. Once an interaction has been identified and validated it is ...

Using Scaffold Liposomes to Reconstitute Lipid-proximal Protein-protein Interactions In Vitro

Using Scaffold Liposomes to Reconstitute Lipid-proximal Protein-protein Interactions In Vitro

Studies of integral membrane proteins in vitro are frequently complicated by the presence of a hydrophobic transmembrane domain. Further complicating ...

Time-resolved ElectroSpray Ionization Hydrogen-deuterium Exchange Mass Spectrometry for Studying Protein Structure and Dynamics

Intrinsically disordered proteins (IDPs) have long been a challenge to structural biologists due to their lack of stable secondary structure elements. ...

Small-Scale Colorimetric Assays of Intracellular Lactate and Pyruvate in the Nematode Caenorhabditis elegans

Small-Scale Colorimetric Assays of Intracellular Lactate and Pyruvate in the Nematode Caenorhabditis elegans

Lactate and pyruvate are key intermediates of intracellular energy metabolic pathways. Monitoring the lactate/pyruvate ratio in cells helps to determine ...

Dissipative Microgravimetry to Study the Binding Dynamics of the Phospholipid Binding Protein Annexin A2 to Solid-supported Lipid Bilayers Using a Quartz Resonator

The dissipative quartz crystal microbalance technique is a simple and label-free approach to measure simultaneously the mass uptake and viscoelastic ...

A Fluorescence Fluctuation Spectroscopy Assay of Protein-Protein Interactions at Cell-Cell Contacts

A variety of biological processes involves cell-cell interactions, typically mediated by proteins that interact at the interface between neighboring ...

Monitoring Protein-RNA Interaction Dynamics In Vivo at High Temporal Resolution Using &#967;CRAC

The interaction between RNA-binding proteins (RBPs) and their RNA substrates exhibits fluidity and complexity. Within its lifespan, a single RNA can be ...

Utilizing Time-Resolved Protein-Induced Fluorescence Enhancement to Identify Stable Local Conformations One &#945;-Synuclein Monomer at a Time

Using spectroscopic rulers to track multiple conformations of single biomolecules and their dynamics have revolutionized the understanding of structural ...

Single Molecule Fluorescence Energy Transfer Study of Ribosome Protein Synthesis

The ribosome is a large ribonucleoprotein complex that assembles proteins processively along mRNA templates. The diameter of the ribosome is approximately ...

F&#246;rster Resonance Energy Transfer Measurements in Living Plant Cells

Sensitized emission-based F&#246;rster resonance energy transfer (FRET) experiments are easily done but depend on the microscopic setup. Confocal laser ...