Procedural Guide for Assessing Axillary Body Temperature using a Digital Thermometer:

Step 1: Perform hand hygiene and put on clean gloves to maintain infection control and prevent cross-contamination.

Step 2: Prepare the patient by explaining the procedure to ensure understanding and cooperation. Ensure privacy, expose the axilla, and inform the patient that minimal movement is crucial for an accurate reading.

Step 3: Adjust the patient’s clothing to expose only the axilla. It minimizes exposure while keeping the patient warm.

Step 4: Remove the thermometer probe from its recording unit. Attach a disposable probe cover securely to prevent contamination.

Step 5: To place the thermometer correctly, raise the patient's arm away from their torso to expose the axilla. Place the thermometer's probe in the center of the axilla, the deepest part, for the most accurate reading.

Step 6: Instruct the patient to lower their arm and press it close to the body to surround the probe with skin, ensuring a reliable measurement.

Step 6: Hold the probe in place until a beep sound is heard, indicating that the measurement is complete. Carefully remove the probe and note the temperature.

Step 7: Post-Measurement, cover the patient, dispose of the probe cover by ejecting it directly into a waste receptacle to avoid reuse, and replace the thermometer in the charging unit to prepare it for next use.

Step 8: Remove the gloves and perform hand hygiene to prevent infection and document the findings. Inform the provider if any abnormality was detected during the procedure.