The In Ovo Chick Chorioallantoic Membrane (CAM) Assay as an Efficient Xenograft Model of Hepatocellular Carcinoma

Summary

The chick chorioallantoic membrane (CAM) is immunodeficient and highly vascularized, making it a natural in vivo model of tumor growth and angiogenesis. In this protocol, we describe a reliable method of growing three-dimensional, vascularized hepatocellular carcinoma (HCC) tumors using the CAM assay.

Abstract

The chick chorioallantoic membrane (CAM) begins to develop by day 7 after fertilization and matures by day 12. The CAM is naturally immunodeficient and highly vascularized, making it an ideal system for tumor implantation. Furthermore, the CAM contains extracellular matrix proteins such as fibronectin, laminin, collagen, integrin alpha(v)beta3, and MMP-2, making it an attractive model to study tumor invasion and metastasis. Scientists have long taken advantage of the physiology of the CAM by using it as a model of angiogenesis. More recently, the CAM assay has been modified to work as an in vivo xenograft model system for various cancers that bridges the gap between basic in vitro work and more complex animal cancer models. The CAM assay allows for the study of tumor growth, anti-tumor therapies, and pro-tumor molecular pathways in a biologically relevant system that is both cost- and time-effective. Here, we describe the development of CAM xenograft model of hepatocellular carcinoma (HCC) with embryonic survival rates of up to 93% and reliable tumor take leading to growth of three-dimensional, vascularized tumors.

Introduction

Hepatocellular carcinoma (HCC) is the 3^rd leading cause of cancer mortality in the world¹. Currently only 30% of HCC patients are eligible for potentially curative surgical treatments², and systemic chemotherapy is not efficacious³. Therefore, there is a pressing unmet clinical need for novel HCC therapies, and the development of model systems suitable for efficient testing of new agents. The chick chorioallantoic membrane (CAM) assay provides a reproducible, cost-effective, and fast medium-throughput method of testing potential anti-tumor drugs in vivo.

The CAM assay has been used extensively to study angiogenesis⁴. It has also been successfully developed into a tumor xenograft model of cancers, including glioblastoma⁵, pancreatic cancer⁶, melanoma^7-9, and osteosarcoma^10-11. Both in ovo¹² and ex ovo¹³ techniques have been utilized in the literature, with details varying from protocol to protocol. One major challenge to the CAM xenograft model is the relatively high incidence of embryonic death after manipulation of the egg, with published chick embryo mortality rates ranging from 25 - 50 percent^11-14.

In this article, we describe the development of an in ovo xenograft model of HCC that reliably produces growth of three-dimensional, vascularized tumors that histologically resemble undifferentiated HCC. We have adapted a protocol first described by Ossowski et al.¹⁴ and have achieved chick embryonic survival rates of up to 93% with extremely high tumor engraftment.

Protocol

1. Egg Incubation

1. Obtain 8 day old specific pathogen-free embryonated eggs.
2. Place eggs in rotating egg tray, stamped ends facing upwards, and place the rotating tray inside an egg incubator. Incubate eggs for 48 hr at 36 °C and 50% humidity.

2. Dropping the CAM and Opening the Eggs

1. Gather eggs from incubator. Place eggs in egg rack, stamped side up, and bring to laminar flow hood.
2. Turn off the room and hood lights.
3. Hold the stamped end of egg lightly to the egg candler to expose the vasculature of the CAM as well as the air sac.
   NOTE: The egg candler is a light source used to visualize the developing embryo and associated air sac and vasculature.
4. Place a pencil mark in between two major blood vessels.
5. Turn on the lights and use a sterile push pin to make one hole at the tip of the egg above the air sac (stamped end) and one hole at the pencil mark. Do not push the push pin all the way through; a hole around 3 mm deep will usually suffice.
6. Turn off the lights. Squeeze safety bulb, pressing the open end firmly against the hole above the air sac. Apply suction to pull air into the hole at the pencil mark, causing the CAM to drop away from the shell at the pencil mark.
7. Check that the air sac has moved from the stamped end of the egg to the pencil-marked hole using the candler. If it has not, use the push pin to make both holes slightly deeper and then re-apply suction using the safety bulb.
8. Turn on the lights. Holding the egg in one hand, turn on the dremel rotary tool with a 15/16 inch cut-off wheel attached and make two transverse cuts just deep enough to cut through the shell but not deep enough to cut all the way down to the depressed CAM. Make the cuts around 2 cm in length and 1 cm apart from each other. Make the cuts wide enough so that a silicone ring 1 cm in diameter can pass through but thinner than the width of standard scotch tape.
9. Next, make 1 longitudinal cut between and at the ends of the two transverse cuts by lightly touching the cut-off wheel to the shell.
10. Slide sterile forceps under the shell piece and parallel to the shell. Grab the shell piece with the forceps and remove the entire piece cleanly.
11. Place scotch tape over the newly opened window, making sure to fold one end over on itself for ease of removal.
12. Place eggs back in incubator in the egg tray (NOT in the rotating egg racks) until time of inoculation.

3. Inoculation

1. Keep basement membrane protein mixture, such as matrigel, on ice (to prevent polymerization) and place in hood.
2. Use 2 mM EDTA to detach cells (4 - 5 ml per T75 flask) and place flasks in tissue culture incubator for 5 min.
3. Resuspend the detached cells in media and count using a hemocytometer and trypan blue. Use between 500,000 to 2,000,000 cells for grafting onto the CAM, depending on cell line. Optimize the proper number in preliminary experiments.
4. Measure volume required for appropriate cell number and centrifuge at 500 x g for 5 min.
5. Discard supernatant and then resuspend cell pellet in 40 µl of PBS++ and 20 µl of basement membrane mixture.
   NOTE: At this point, cells can be treated with drugs or other test agents as needed for experiments by resuspending into the cell/basement membrane mixture suspension. Alternatively, agents can be pipetted onto the cell/basement membrane mixture suspension after grafting.
6. Retrieve egg rack with eggs from the incubator and place in the laminar flow hood.
7. Peel tape off of the window, retrieve a 1 mm silicone ring from the cap of a cryogenic vial using sterilized forceps, and drop the ring through the window.
8. Pipet the 60 µl cell solution of PBS++ and basement membrane mixture directly into the center of the silicone ring resting on the CAM.
9. Re-tape the window and move egg rack back to incubator. At this point, use caution when moving the eggs as the ring and the cell suspension can easily become displaced.
10. Allow tumors to grow for 5 to 7 days.

4. Harvesting Tumors

1. Place under-pad in hood. Prepare 35 x 10 mm plates and paraformaldehyde containers as needed for histology. Put 1 ml PBS++ in each 35 x 10 mm plate.
2. Place biohazard bag in hood. Take sterile dissection scissors and insert the pointed end into the egg at the hole near the stamped end.
3. Cut around the entire egg longitudinally.
   NOTE: the CAM and the tumor with the ring should stick to the top half of the shell with the window.
4. Using dissection scissors and forceps, dissect the tumor away from the CAM and place tumor in the 35 x 10 mm plate. Measure and weigh tumors. Fixed tumors in paraformaldehyde and then paraffin-embed them for use in histology and immunohistochemistry experiments.

5. (Optional): Tumor Cell Dissociation

1. Use dissection scissors to mince the tumor in the 35 x 10 mm plate. Pour minced tumor into a 15 ml centrifuge tube and remove as much PBS++ as possible through pipetting.
2. Add 2 ml of collagenase (1 mg/ml in PBS++), turn tube over several times, and incubate tube at 37 °C for at least 30 min (up to several hours).
3. Add 5 ml media to each tube and resuspend thoroughly by pipetting up and down 20 - 40x. Thorough pipetting is critical for complete cell dissociation.
4. Allow sediment to settle, and transfer the supernatant to a fresh tube. Centrifuge at 500 x g for 5 min. Remove supernatant, leaving behind dissociated cell pellet.
   NOTE: At this point, cell pellets can be used for various experiments (flow cytometry, lysis for use in Western blotting, RNA isolation, etc). Total tumor cell count can also be obtained using a hemocytometer and trypan blue staining. Note that smaller, oval-shaped cells are chicken cells from the CAM and should not be counted as tumor cells. There should be a minimal number of contaminating non-tumor (CAM) cells if the tumor is dissected away from the CAM carefully.

Results

Representative pictures of key steps in the protocol are shown here. Figure 1A demonstrates the use of the candler to visualize the developing embryo, the air sac, and the vasculature of the CAM. Figure 1B-1C show the process of dropping the CAM by making the two holes and then applying negative pressure using the safety bulb, and Figure 1D shows a successfully dropped CAM with a large air bubble under the pencil-marked hole. Figure 1E and Figure...

Discussion

Several key steps in this protocol most likely account for the improved embryonic survival as well as increased reliability of tumor growth. Dropping the CAM away from the shell by applying suction to the air sac is less invasive than other existing methods (using a needle to remove albumin from the egg, blunt dissection, etc.). Using a sterile push pin to create the two small holes required for this method is the most challenging part of the protocol. Using too much force can result in damage to the CAM and its vasculat...

Materials

Name	Company	Catalog Number	Comments
Premium incubated eggs	Charles River	N/A	http://www.criver.com/files/pdfs/avian/av_c_spf_egg_price_list.aspx
Egg incubators	GQF	Hova-Bator 2362N
Rotating egg trays	GQF	1611 Automatic Egg Turner
Egg candler	Lyon	Hi-Power 950-070
Dremel 100 rotary tool with 15/16 cut-off wheel	Dremel	100-N/7
Sterile forceps, push pin, dissection scissors, Scotch tape
Matrigel	BD Biosciences	356234
Cryogenic vials, external thread with silicone washer	Corning	430659
Collagenase from Clostridium histolyticum	Sigma	C9891