Quantification of Endosome and Lysosome Motilities in Cultured Neurons Using Fluorescent Probes

Summary

The investigation of membrane trafficking is crucial for understanding neuronal functions. Here, we introduce a method for quantifying vesicle motility in neurons. This is a convenient method that can be adapted to the quantification of membrane trafficking in the nervous system.

Abstract

In the brain, membrane trafficking systems play important roles in regulating neuronal functions, such as neuronal morphology, synaptic plasticity, survival, and glial communications. To date, numerous studies have reported that defects in these systems cause various neuronal diseases. Thus, understanding the mechanisms underlying vesicle dynamics may provide influential clues that could aid in the treatment of several neuronal disorders. Here, we describe a method for quantifying vesicle motilities, such as motility distance and rate of movement, using a software plug-in for the ImageJ platform. To obtain images for quantification, we labeled neuronal endosome-lysosome structures with EGFP-tagged vesicle marker proteins and observed the movement of vesicles using a time-lapse microscopy. This method is highly useful and simplify measuring vesicle motility in neurites, such as axons and dendrites, as well as in the soma of both neurons and glial cells. Furthermore, this method can be applied to other cell lines, such as fibroblasts and endothelial cells. This approach could provide a valuable advancement of our understanding of membrane trafficking.

Introduction

Precise control of endosome-lysosome trafficking is indispensable for regulating neuronal function. Notably, the dynamic movements of these vesicles are a key factor underlying the regulation of neuronal morphology, development, and survival. Defects in this system cause severe neuronal disorders^1,2. The molecular mechanisms that link vesicle trafficking to neuronal diseases are considered complicated, and several groups have sought to examine this relevance. For instance, it has been reported that perturbed late endosome motility is significantly associated with Niemann-Pick C disease³, an inherited neurodegenerative disorder caused by lysosome defects. Another example is a mutation in a lysosomal Ca²⁺ channel, trpml1, which impairs lysosomal motility, resulting in lysosomal storage diseases^4,5,6. Our group has reported that dysregulation of PtdIns(3,5)P₂ turnover suppresses endosome and lysosome motility in neurons, leading to an increase in vulnerability to the stress response^7,8. The metabolic regulation of PtdIns(3,5)P₂, which mostly localizes on late endosomes and lysosomes, plays an important role in a wide variety of cellular functions, including vesicle trafficking and fusion-fission processes^9,10. Since impaired PtdIns(3,5)P₂ turnover causes severe neurodegeneration^11,12, the aberrant regulation of endosome-lysosome motility could be a key factor for understanding the pathogenesis of neurodegeneration. An investigation of the molecular mechanisms that underlie vesicle motility may thus provide promising clues that can deepen our understanding of several neuronal disorders.

In this paper, we introduce a valuable method to quantify vesicle motility in neurons using a free software package called Manual Tracking. The aim was to develop a fast quantification method to analyze vesicle motility. This quantification is directed through a standard approach of clicking on a reference point in each frame of a time-lapse movie. The use of the Manual Tracking software makes this approach quite simple and of broad utility, unlike other applications. Furthermore, this approach is also applicable to other cells, such as glial cells. Although this method is primitive, it can be applied to various analyses, including of cellular motility and morphological change. For instance, after defining a reference point across a sequence of images, information on the positions of the reference points and the time at each position can be extracted from sequential images using data analysis and image-processing software. Taken together, this method is simple but powerful and contributes to the development of improved efficiency in studies based on membrane trafficking, such as those examining endosome-lysosome function.

Protocol

All animal procedures were performed with the approval of the University of Tsukuba Animal Care and Use Committee (IACUC).

1. Dissection

1. To prepare embryonic day 13-14 ICR or C57BL/6 fetuses, euthanize pregnant mice by cervical dislocation. Remove the uterus and put it into a petri dish with Hank's Balanced Salt Solution (HBSS). Rinse it well to remove the blood.
2. Using forceps, transfer the uterus to a new petri dish with 70% ethanol to sterilize.
3. Transfer the uterus to a new petri dish with HBSS. Remove the fetuses from the uterus using sterilized dissecting forceps and surgical scissors.
4. Decapitate the fetuses using surgical scissors. Place them into a new petri dish with HBSS.
5. Remove the skin and skull and take out the brains using sterilized dissecting forceps. Put them into a petri dish with HBSS.
   NOTE: From this step on, it is best to conduct the procedure on a clean bench.
6. Remove the meninges using sterilized dissecting forceps under a stereo microscope. Cut off the basal ganglia, hippocampus, and cerebellum using forceps. Using curved-tip forceps, transfer the cortices to a new petri dish with HBSS.
7. Collect all cortices using a disposable dropper or a 25 mL pipette. Put them into a 15 mL tube and then remove the HBSS by pipetting.
8. Add 3 mL of cerebral cortical enzyme solution to the tube containing the cortices. Put this tube into a water bath and incubate at 37 °C for 5 min.
   NOTE: Prepare a cerebral cortical culture enzyme consisting of Phosphate-Buffered Saline (PBS) with 0.25% trypsin and 1 mM EDTA. Sterilize with a 0.22 µm filter.
9. Add a further 3 mL of cerebral cortical enzyme solution into the tube containing the cortices and incubate at 37 °C in a water bath for an additional 5 min.
10. Remove the cerebral cortical enzyme solution using a 5 mL pipette and add 5 mL of Dulbecco's Modified Eagle Medium (DMEM) containing 10% Fetal Bovine Serum (FBS).
11. Dissociate the cortices by gently pipetting up and down using a 5 mL pipette with a sterile P1000 tip. Pipette again using a 5 mL pipette with a P200 tip.
12. Put a 40 µm nylon cell strainer on a 50 mL tube and filter the suspension to remove the debris.
13. Centrifuge at 420 x g for 5 min at RT and then remove the DMEM medium.
14. Add 5 mL of cerebral cortical culture medium and gently resuspend the cell pellet.
    NOTE: Prepare a cerebral cortical culture medium consisting of neuron basal medium supplemented with 1x B-27 supplements, 2 mM L-glutamine, and 100 U/mL penicillin streptomycin.
15. Count the cells using a hemocytometer and adjust the cell concentration (as desired) using the cerebral cortical culture medium.
16. Plate 3.0 × 10⁶ cortical neurons in 2.0 mL per coated 35 mm glass-bottomed dishes.
    NOTE: Before plating, coat the 35mmm glass-bottomed dishes with 0.1 mg/mL Poly-D-Lysine hydrobromide (PDL) or 0.01% Poly-L-Ornithine (PLO). Incubate for 3 h – O/N at 37 °C and wash with PBS at least 3x.

2. Imaging Vesicle Motility

1. Prepare the plasmids that will label each type of vesicle. For instance, use EGFP-Rab5 for early endosomes, EGFP-Rab7 for late endosomes, LAMP-EGFP for lysosomes, and EGFP-LC3 for autophagosomes^8,13.
   NOTE: These plasmids are available on request from tsuruta.fuminori.fn@u.tsukuba.ac.jp. Typically,3 -5 days in vitro (DIV) neurons can be transfected with these plasmids using transfection reagents.
2. Mix 4.0 µg of plasmids with 200 µL of serum-free medium by pipetting. In a separate tube, dilute 8 µL of transfection reagent (see Table of Materials) in 200 µL of serum-free medium. Incubate for 5 min at RT.
3. Mix the plasmid solution and transfection regent solution in step 2.2 by pipetting. Incubate for 20 min at RT.
4. Add serum-free medium and 400 µL of the plasmid solution from step 2.3 to each coated glass-bottom dish. Incubate the neurons at 37 °C in a 5% CO₂ incubator for 30 min. Replace the medium with 2 mL of cerebral cortical culture medium. Incubate the neurons at 37 °C in a 5% CO₂ incubator for 1-2 days.
5. After 1 - 2 d of transfection, select the transfected cells for image acquisition.
   NOTE: Premature neurons less than 7 DIV have a tendency to exhibit dynamic vesicle motility. Select neurons that moderately express the fluorescence probe because clear images cannot be obtained when a highly expressing neuron is selected. Also, select a typical neuronal shape, such as pyramidal neurons, which have long axons and intricate dendrites, for ease of identification of the axon and dendrites (see Figure 1A).
6. Image acquisition using a time-lapse imaging system:
   For imaging, use a fluorescence microscope equipped with a Charge-Coupled Device (CCD) camera with 40X Plan Apo 0.95NA or 100X Plan Apo VC NA1.4 objective lenses. Control the temperature at 37 °C using an incubation system. Acquire neuron images at one frame/5 s over a 100 s period controlled by the image acquisition software. Alternatively, acquire images at shorter intervals and for longer time periods, such as at one frame per 2 s over a 300-s period.
   NOTE: A variety of applications are available for taking sequential images, many of which would be suitable for this method. Therefore, no particular application is recommended; rather, each researcher should use whatever application is available.

3. Image Analysis

1. Open all sequential images in ImageJ software with Manual Tracking¹⁴.
   NOTE: To date, Manual Tracking has been widely used in tracking experiments^{15,16,17,18,19}. Manual Tracking was developed by Dr. Fabrice Cordelières. Detailed written instructions are available online²⁰. For the analysis, the quality of the imaging data is improved with a sufficient number of images. It is recommended to use more than 20 images.
2. To combine the sequential images, choose <Image> → <Stacks> → <Images to Stack>. Click <OK>.
3. Choose <Plugins> → <Manual Tracking>; a tracking window will pop up.
4. Click on the checkbox of <Show Parameters?> and define the tracking parameters in the parameters section.
   NOTE: Several parameters can be set, including time interval, x/y calibration, z calibration, search square size for centering, dot size, line width, and font size. In this simplified assay, both time interval and x/y calibration were defined. Under other experimental circumstances, it may be necessary to define other parameters as well. The parameters used here are as follows: the <Time interval> is 5 s, and the <x/y calibration> is either 0.26642 µm for a 40X Plan Apo 0.95NA objective lens or 0.10657 µm for a 100X Plan Apo VC NA1.4 objective lens.
5. After the parameters are defined, click on <add Track> to start a new track.
6. After determining the vesicles of interest (e.g., the vesicles indicated by blue and red arrowheads in Figure 1A (right panel)), click on the center of the signals in the sequential images to record the xy coordinates. The results of the recorded xy coordinates, distance, and velocity show up in a new window.
   NOTE: In the case of lysosomes, large bright fluorescent signals (e.g., Figure 1A (right panel), orange arrowhead) are often observed in neurons. As these signals occasionally exhibit either accumulated vesicles or pathological varicosities, these signals should be avoided for quantifying motility.
7. Repeat step 3.6 to collect the xy coordinates of vesicles from all sequential images; each image automatically advances to the successive image after the reference point is selected.
8. Export these data to a new table (e.g., a spreadsheet). Use an appropriate software to create a suitable graph (see Table of Materials).
   NOTE: To analyze the data, select the <Distance> column, sum up all values of this column, and show a motility distance as a bar graph, such as in Figure 1B. Additionally, repeat this step, calculate the average of the total motility distance, and show as a bar graph, as in Figure 1C. The software to create a bar graph and waveform data are shown in the Table of Materials.

Results

This assay was designed to measure vesicle dynamics in in vitro culture. This assay was utilized to determine the vesicle motility associated with neuronal morphology and survival. Figure 1A and B display representative data showing lysosome motility in neurons. Cortical neurons were transfected with the lysosome marker, LAMP-EGFP, and observed using a standard fluorescence microscope. It has been previously reported that specific endosome-lysoso...

Discussion

This protocol introduces the procedure for quantifying vesicle motility. In primary neurons, endosomes and lysosomes tend to show high motility in younger neurons (4-6 DIV). Given that neurons must deliver some components to the leading edges to elongate neural processes, membrane trafficking should occur dynamically during this stage. Thus, it is important to use younger neurons to observe dynamic motility in neuronal dendrites. In addition, larger vesicles do not tend to exhibit high motility, even in younger neurons. ...

Materials

Name	Company	Catalog Number	Comments
Neurobasal medium	Thermo Fisher	21103-049
Dulbecco's modified eagle medium (DMEM)	Wako	044-29765
Opti-MEM	Thermo Fisher	31985070	Serum free medium
Hank's balanced salt solution (HBSS)	Thermo Fisher	14170112
Penicilin Streptmycin	Thermo Fisher	15140122
L-Glutamine	Thermo Fisher	25030081
B-27 Supplements	Thermo Fisher	17504044
2.5% Trypsine	Thermo Fisher	15090046
Poly-D-Lysine hydrobromide (PDL)	Sigma	P7280
Poly-L-Ornithine (PLO)	Sigma	P4957
Nylon cell strainer	Corning	431750
Lipofectamine 2000	Thermo Fisher	11668027	Transfection reagent
Polyethyleneimine "Max" (PEI)	polysciences	24765	Transfection reagent. As an alternative to Lipofectamine2000, 0.1mg/mL Polyethyleneimine dissolved in sterilized water is available. But it is low efficiency and high toxicity.
BIOREVO BZ-9000	Keyence	NA
Incubation system INUG2-K13	Tokay Hit	NA
GraphPad Prism version 6.0	GraphPad Software	NA
Excel version 15	Microsoft	NA
ImageJ verion 1.47	NA	NA