Validating Whole Genome Nanopore Sequencing, using Usutu Virus as an Example

Summary

We previously validated a protocol for amplicon-based whole genome Usutu virus (USUV) sequencing on a nanopore sequencing platform. Here, we describe the methods used in more detail and determine the error rate of the nanopore R10 flow cell.

Abstract

Whole genome sequencing can be used to characterize and to trace viral outbreaks. Nanopore-based whole genome sequencing protocols have been described for several different viruses. These approaches utilize an overlapping amplicon-based approach which can be used to target a specific virus or group of genetically related viruses. In addition to confirmation of the virus presence, sequencing can be used for genomic epidemiology studies, to track viruses and unravel origins, reservoirs and modes of transmission. For such applications, it is crucial to understand possible effects of the error rate associated with the platform used. Routine application in clinical and public health settings require that this is documented with every important change in the protocol. Previously, a protocol for whole genome Usutu virus sequencing on the nanopore sequencing platform was validated (R9.4 flowcell) by direct comparison to Illumina sequencing. Here, we describe the method used to determine the required read coverage, using the comparison between the R10 flow cell and Illumina sequencing as an example.

Introduction

Fast developments in third generation sequence technologies allows us to move forward towards close to real-time sequencing during viral outbreaks. This timely availability of genetic information can be useful to determine the origin and evolution of viral pathogens. Gold standards in the fields of next generation sequencing however, are still the second-generation sequencers. These techniques rely on specific and time-consuming techniques like clonal amplification during an emulsion PCR or clonal bridge amplification. The third-generation sequencers are cheaper, hand-held and come with simplified library preparation methodologies. Especially the small size of the sequence device and the low purchase price makes it an interesting candidate for deployable, fieldable sequencing. This could for instance be seen during the Ebola virus outbreak in Sierra Leone and during the ongoing arbovirus outbreak investigations in Brazil^1,2,3. However, the reported high error rate⁴ might limit the applications for which nanopore sequencing can be used.

Nanopore sequencing is evolving quickly. New products are available in the market on a regular basis. Examples of this are for instance the 1D squared kits which enables sequencing of both strands of the DNA molecule, thereby boosting the accuracy of the called bases⁵ and the development of the R10 flow cell which measures the change in current at two different instances in the pore⁶. In addition, improved bio-informatic tools like improvements in basecalling will improve the accuracy of basecalling⁷. One of the most frequently used basecallers, (e.g., Albacore), has been updated at least 12 times in a 9-month time period⁵. Recently, the manufacturer also released a novel basecaller called flip-flop, which is implemented in the default nanopore software⁸. Together, all of these improvements will lead to more accurate sequences and will decrease the error rate of the nanopore sequencer.

Usutu virus (USUV) is a mosquito-borne arbovirus of the family Flaviviridae and it has a positive-stranded RNA genome of around 11,000 nucleotides. USUV mainly affects great grey owls and blackbirds^9,10, although other bird species are also susceptible to USUV infection¹¹. Recently, USUV was also identified in rodents and shrews although their potential role in transmission of the virus remains unknown¹². In humans, asymptomatic infections have been described in blood donors^13,14,15,16 while USUV infections also have been reported to be associated with encephalitis or meningo-encephalitis^17,18. In the Netherlands, USUV was first detected in wild birds in 2016¹⁰ and in asymptomatic blood donors in 2018¹⁴. Since the initial detection of USUV, outbreaks have been reported during the subsequent years and surveillance, including whole genome sequencing, is currently ongoing to monitor the emerge and spread of an arbovirus in a previously naïve population.

Similar to what has been described for other viruses, such as Ebola virus, Zika virus and yellow fever virus^3,19,20, we have developed a primer set to sequence full length USUV²¹. This polymerase chain reaction (PCR)-based approach allows for the recovery of full length USUV genomes from highly host-contaminated sample types like brain samples in samples up to a Ct value of around 32. Benefits of an amplicon-based sequencing approach are a higher sensitivity compared to metagenomic sequencing and a higher specificity. Limitations of using an amplicon-based approach are that the sequences should be similar in order to design primers fitting all strains and that primers are designed on our current knowledge about the virus diversity.

Given the constant developments and improvements in third generation sequencing, there is a need to evaluate the error rate of the sequencer on a regular basis. Here, we describe a method to evaluate the performance of nanopore directly against Illumina sequencing using USUV as an example. This method is applied to sequences generated with the latest R10 flow cell and basecalling is performed with the latest version of the flip-flop basecaller.

Protocol

NOTE: List of software tools to be used: usearch v11.0.667; muscle v3.8.1551; porechop 0.2.4; cutadapt 2.5; minimap2 2.16-r922; samtools 1.9; trimmomatic 0.39; bbmap 38.33; spades v3.13.1; kma-1.2.8

1. Primer design

1. Start with downloading or retrieving a set of relevant reference whole genome sequences from public or private data collections. For instance, retrieve all full length USUV genomes (taxid64286) from the NCBI database²². USUV encodes a genome of around 11,000 nucleotides so only retrieve the sequences with a sequence length of 8,000-12,000 nucleotides. Do this using the following search entry:
   - taxid64286[Organism:noexp] AND 8000[SLEN]:12000[SLEN].
   1. Click on Send to | Complete Record | File; use Format = FASTA and create the File.
2. To downsize the set of reference sequences, remove duplicate sequences or sequences with over 99% nucleotide identity from the dataset. Do this using the cluster fast option from usearch²³. On the command line enter:
   - usearch -cluster_fast All_USUV.fasta -id 0.99 -centroids All_USUV_dedup.fasta
3. To generate the primers, sequences need to be aligned. This is done using MUSCLE²⁴. On the command line enter:
   - muscle -in All_USUV_dedup.fasta -out All_USUV_dedup_aligned.fasta -log log_muscle.txt
   NOTE: It is essential to manually inspect the alignment to check for discrepancies. These can be manually corrected if needed and the ends can be trimmed according to the length of most whole genome sequences.
4. Primal is used to make a draft selection of the primers which can be used for full length amplicon sequencing¹⁹. Upload the alignment to the primal website (http://primal.zibraproject.org/) and select the preferred amplicon length and overlap length between the different amplicons. Go to primal.zibraproject.org, fill in the Scheme name, upload the aligned fasta file, select the amplicon length, overlap size, and generate the scheme.
5. Align the complete set of available complete USUV sequences (not the downsized or deduplicated set). On the command line enter:
   - muscle -in All_USUV.fasta -out All_USUV_aligned.fasta -log log_muscle.txt
   NOTE: Map the generated primers against the complete alignment (do not use the deduplicated alignment), manually correct errors and include a maximum of 5 degenerative primer positions.

2. Multiplex PCR

1. Perform the multiplex PCR using the designed primers and nanopore and Illumina sequencing. The multiplex PCR for USUV was performed as previous described^19,21.
2. Perform basecalling with flip-flop version 3.0.6.6+9999d81.

3. Data analysis to generate consensus sequences from nanopore data

1. Several samples can be multiplexed on a single nanopore sequencing run. After performing the sequence run, demultiplex the nanopore data. Use Porechop²⁵ for this. To prevent contamination and enhance accuracy, use the require_two_barcodes flag. On the command line enter:
   - porechop -i Run_USUV.fastq -o Run_USUV_demultiplex --require_two_barcodes
2. After demultiplexing, remove primer sequences (indicated in the file Primers_Usutu.fasta in both orientations) using cutadapt²⁶. In addition, remove sequences with a length shorter than 75 nucleotides. The primers have to be removed since they can introduce artificial biases in the consensus sequence. On the command line enter:
   - cutadapt -b file:Primers_USUV.fasta -o BC01_trimmed.fastq BC01.fastq -m 75
3. Demultiplexed sequence reads can be mapped against a panel of distinct reference strains using minimap2²⁷ and a consensus sequence can be generated using samtools²⁸. Follow the example below which shows the procedure of a reference-based alignment and the consensus sequence generation of one sample: BC01. On the command line enter:
   - minimap2 -ax map-ont Random_Refs_USUV.fasta BC01_trimmed.fastq > BC01.bam
   - samtools sort BC01.bam > BC01_sorted.bam
   - bcftools mpileup -Ou -f Random_Refs_USUV.fasta BC01_sorted.bam | bcftools call -mv -Oz -o BC01.vcf.gz
   - bcftools index BC01.vcf.gz
   - cat Random_Refs_USUV.fasta | bcftools consensus BC01.vcf.gz > BC01_consensus.fasta
4. For reference-based alignments it is essential that a closely related reference sequence is used. Therefore, perform a BlastN search with the generated consensus sequence to identify the closest reference strain. After that, repeat the reference-based alignment with the closest reference strain as reference (step 3.3 and 3.4). On the command line enter:
   - minimap2 -ax map-ont Ref_USUV_BC01.fasta BC01_trimmed.fastq > BC01_ref.bam
   - samtools sort BC01_ref.bam > BC01_sorted_ref.bam
   - bcftools mpileup -Ou -f Ref_USUV_BC01.fasta BC01_sorted_ref.bam | bcftools call -mv -Oz -o BC01_ref.vcf.gz
   - bcftools index BC01_ref.vcf.gz
   - cat Ref_USUV_BC01.fasta | bcftools consensus BC01_ref.vcf.gz > BC01_ref_consensus.fasta

4. Analysis of the Illumina data

1. These sequences are automatically demultiplexed after sequencing. Reads can be quality controlled using trimmomatic²⁹. For paired-end Illumina sequences, use the commonly used cut-off median PHRED score of 33 and a minimal read length of 75 to get accurate, high quality reads. On the command line enter:
   - trimmomatic PE -phred33 9_S9_L001_R1_001.fastq.gz 9_S9_L001_R2_001.fastq.gz 9_1P.fastq 9_1U.fastq 9_2P.fastq 9_2U.fastq LEADING:3 TRAILING:3 SLIDINGWINDOW:3:15 MINLEN:75
2. Remove primers (indicated in the file Primers_Usutu.fasta in both orientations), since they can introduce artificial biases, using cutadapt²⁶. In addition, remove sequences with a length shorter than 75 nucleotides using the commands below. On the command line enter:
   - cutadapt -b o 9_1P_trimmed.fastq -p 9_2P_trimmed.fastq 9_1P.fastq 9_2P.fastq -m 75
3. Before de novo assembly, the sequence reads can be normalized for an even coverage across the genome. This is essential since de novo assemblers like SPAdes take the read coverage into account when assembling sequence reads. Normalize reads to a read coverage of 50 using BBNorm from the BBMap package³⁰. On the command line enter:
   - bbmap/bbnorm.sh target=50 in=9_1P_trimmed.fastq in2=9_2P_trimmed.fastq out=Sample9_FW_norm.fastq out2=Sample9_RE_norm.fastq
4. The normalized reads are de novo assembled using SPAdes³¹. Default settings are used for the assembly using all different kmers (21, 33, 55, 77, 99 and 127). On the command line enter:
   - spades.py -k 21,33,55,77,99,127 -o Sample9 -1 Sample9.qc.f.fq -2 Sample9.qc.r.fq
5. Map the QC reads against the obtained consensus sequence using minimap2 and programs like Geneious, Bioedit or Ugene to curate the alignment. It is important to check the beginning and the end of the contig.
   1. Align the QC reads against the obtained consensus sequencing using minimap2.
   2. Import the alignment in Geneious/Bioedit/UGene.
   3. Manually inspect, correct and curate especially the beginning and the end of the genome.

5. Determining the required read coverage to compensate for the error profile in nanopore sequencing using Illumina data as gold standard

1. Select sequence reads mapping to one amplicon, in this case amplicon 26. Subsequently, map the nanopore reads against this amplicon using minimap2. Use Samtools to select only the reads mapping to amplicon 26 and to convert the bam file into fastq. On the command line enter:
   - minimap2 -ax map-ont -m 150 Amplicon26.fasta BC01_trimmed.fastq > BC01.bam
   - samtools view -b -F 4 BC01.bam > BC01_mapped.bam
   - samtools bam2fq BC01_mapped.bam | seqtk seq - -> BC01_mapped.fastq
2. Randomly select subsets of for instance 200 sequence reads one thousand times. For example, changing it to 10 will result in the random selection of one thousand times a subset of 10 sequence reads. The script is provided as Supplementary File 1. On the command line enter:
   - python Random_selection.py
3. All randomly selected sequence reads are aligned to amplicon 26. Use KMA³² to map the sequence reads and to immediately generate a consensus sequence. Use optimized settings for nanopore sequencing, indicated by the -bcNano flag. On the command line enter:
   - kma index -i Amplicon26.fasta
   - for file in random_sample*; do
   - sampleID=${file%.fastq}
   - kma -i ${sampleID}.fastq -o ${sampleID} -t_db Amplicon26.fasta -mem_mode -mp 5 -mrs 0.0 -bcNano
   - done
4. Inspect the generated consensus sequences on the command line using:
   - cat *.fsa > All_genomes.fsa
   - minimap2 -ax map-ont Amplicon26.fasta All_genomes.fsa > All_genomes.bam
   - samtools sort All_genomes.bam > All_genomes_sorted.bam
   - samtools stats All_genomes_sorted.bam > stats.txt
   1. The error rate is displayed in the stats.txt under the heading error rate #mismatches / bases mapped. Display it on the screen with the following command:
      - grep ^SN stats.txt | cut -f 2-
   2. The amount of indels is displayed under the heading #Indels per cycle. Display it on the screen with the following command:
      - grep ^IC stats.txt | cut -f 2-

Discussion

Nanopore sequencing is constantly evolving and therefore there is a need for methods to monitor the error rate. Here, we describe a workflow to monitor the error rate of the nanopore sequencer. This can be useful after the release of a new flow cell, or if new releases of the basecalling are released. However, this can also be useful for users who want to set-up and validate their own sequencing protocol.

Different software and alignment tools can yield different results³³. In this manuscript, we aimed to use freely available software packages which are commonly used, and which have clear documentation. In some cases, preference might be given to commercial tools, which generally have a more user-friendly interfaces but have to be paid for. In the future, this method can be applied to the same sample in case big modifications in sequence technology or basecalling software are introduced Preferentially this should be done after each update of the basecaller or flowcell, however given the speed of the current developments this can be also been done only after major updates.

The reduction in the error rate in sequencing allows for a higher number of samples to be multiplexed. Thereby, nanopore sequencing is getting closer to replacing conventional real time PCRs for diagnostic assays, which is already the case for influenza virus diagnostics. In addition, the reduction of the error rate increases the usability of this technique sequencing, for instance for the determination of minor variants and for high-throughput unbiased metagenomic sequencing.

A critical step in the protocol is that close, reliable reference sequences need to be available. The primers are based on the current knowledge about virus diversity and might need to be updated every once in a while. Another critical point when setting up an amplicon-based sequencing approach is the balancing of the primer concentration to get an even balance in amplicon depth. This enables the multiplexing of more samples on a sequence run and results in a significant cost reduction.

Materials

Name	Company	Catalog Number	Comments
Agencourt AMPure XP beads	Beckman Coulter	A63881
dNTPs	Qiagen	201900
FLO-MIN106 R10 flowcell	Nanopore	R10 flowcell
KAPA Hyperplus libarary preparation kit	Roche	7962436001
Library Loading Bead Kit	Nanopore	EXP-LLB001
Ligation Sequencing Kit 1D	Nanopore	SQK-LSK109
Native Barcoding Kit 1D 1-12	Nanopore	EXP-NBD103
Native Barcoding Kit 1D 13-24	Nanopore	EXP-NBD104
NEB Blunt/TA Ligase Master Mix	NEB	M0367S
NEB Next Quick Ligation Module	NEB	E6056
NEB Next Ultra II End Repair / dA-Tailing Module	NEB	E7546S
Protoscript II Reverse Transcriptase	NEB	M0368X
Q5 High-Fidelity polymerase	NEB	M0491
Qubit dsDNA HS Assay kit	Thermo Fisher	Q32851
Random Primers	Promega	C1181
RNAsin Ribonuclease Inhibitor	Promega	N2111