a-nonsequencing-approach-for-the-rapid-detection-of-rna-editing

A Nonsequencing Approach for the Rapid Detection of RNA Editing

RNA editing is a process that leads to posttranscriptional sequence alterations in RNAs. Detection and quantification of RNA editing rely mainly on Sanger ...

Japan Advanced Institute of Science and Technology

JAIST Venture Business Laboratory, Ishikawa Create Labo

We have developed an advanced microintaglio printing method for fabricating fine and high-density micropatterns and applied it to the microarraying of RNA molecules. The microintaglio printing of RNA reported here is based on the hybridization of RNA with immobilized complementary DNA probes. The hybridization was controlled by switching the RNA conformation via the temperature, and an RNA microarray with a diameter of 1.5 µm and a density of 40,000 spots/mm(2) with high contrast was successfully fabricated. Specifically, no size effects were observed in the uniformity of patterned signals over a range of microarray feature sizes spanning one order of magnitude. Additionally, we have developed a microintaglio printing method for transcribed RNA microarrays on demand using DNA-immobilized magnetic beads. The beads were arrayed on wells fabricated on a printing mold and the wells were filled with in vitro transcription reagent and sealed with a DNA-immobilized glass substrate. Subsequently, RNA was in situ synthesized using the bead-immobilized DNA as a template and printed onto the substrate via hybridization. Since the microintaglio printing of RNA using DNA-immobilized beads enables the fabrication of a microarray of spots composed of multiple RNA sequences, it will be possible to screen or analyze RNA functions using an RNA microarray fabricated by temperature-controlled microintaglio printing (TC-µIP).

Temperature-controlled microintaglio printing for high-resolution micropatterning of RNA molecules.

Antibody-based immunosensors are relatively less accessible to a wide variety of unreachable targets, such as low-molecular-weight biomarkers that represent a rich untapped source of disease-specific diagnostic information. Here, we present a peptide aptamer-based electrochemical sensor technology called 'PEP-on-DEP' to detect less accessible target molecules, such as renin, and to improve the quality of life. Peptide-based aptamers represent a relatively smart class of affinity binders and show great promise in biosensor development. Renin is involved in the regulation of arterial blood pressure and is an emerging biomarker protein for predicting cardiovascular risk and prognosis. To our knowledge, no studies have described aptamer molecules that can be used as new potent probes for renin. Here, we describe a portable electrochemical biosensor platform based on the newly identified peptide aptamer molecules for renin. We constructed a randomized octapeptide library pool with diversified sequences and selected renin specific peptide aptamers using cDNA display technology. We identified a few peptide aptamer sequences with a KD in the µM binding affinity range for renin. Next, we grafted the selected peptide aptamers onto gold nanoparticles and detected renin in a one-step competitive assay using our originally developed DEP (Disposable Electrochemical Printed) chip and a USB powered portable potentiostat system. We successfully detected renin in as little as 300ngmL(-1) using the PEP-on-DEP method. Thus, the generation and characterization of novel probes for unreachable target molecules by merging a newly identified peptide aptamer with electrochemical transduction allowed for the development of a more practical biosensor that, in principle, can be adapted to develop a portable, low-cost and mass-producible biosensor for point-of-care applications. 

PEP-on-DEP: A competitive peptide-based disposable electrochemical aptasensor for renin diagnostics.

The extreme miniaturization of biological and chemical assays in aqueous-droplet compartments enables spatiotemporal control for large-scale parallel experimentation and can thus permit new capabilities for "digitizing" directed molecular evolution methodologies. We report a remarkably facile bulk method to generate mega-scale monodisperse sub-femtoliter aqueous droplets by electrospray, using a prototype head with super-fine inkjet technology. Moreover, the electrostatic inkjet nozzle that injects the aqueous phase when immersed within an immiscible phase (an optimized oil/surfactant mixture) has the advantage of generating cell-like sub-femtoliter compartments for biomolecule encapsulation and successive biological and chemical reactions. Sub-femtoliter droplets of both liquid (water-in-oil, volumes ranging from 0.2 to 6.4 fL) and gel bead (agarose-in-oil, volume ranging from 0.3 to 15.6 fL) compartments with average sizes of 1.3 μm and 1.5 μm, respectively, were successfully generated using an inkjet nozzle at a speed of more than 10(5) droplets per second. We demonstrated the applicability of this system by synthesizing fluorescent proteins using a cell-free expression system inside electrosprayed sub-femtoliter droplets at an accelerated rate, thereby extending the utility of in vitro compartmentalization with improved analytical performance for a top-down artificial cellular system.

A bulk sub-femtoliter in vitro compartmentalization system using super-fine electrosprays.

Advances in lithographic approaches to fabricating bio-microarrays have been extensively explored over the last two decades. However, the need for pattern flexibility, a high density, a high resolution, affordability and on-demand fabrication is promoting the development of unconventional routes for microarray fabrication. This review highlights the development and uses of a new molecular lithography approach, called "microintaglio printing technology", for large-scale bio-microarray fabrication using a microreactor array (µRA)-based chip consisting of uniformly-arranged, femtoliter-size µRA molds. In this method, a single-molecule-amplified DNA microarray pattern is self-assembled onto a µRA mold and subsequently converted into a messenger RNA or protein microarray pattern by simultaneously producing and transferring (immobilizing) a messenger RNA or a protein from a µRA mold to a glass surface. Microintaglio printing allows the self-assembly and patterning of in situ-synthesized biomolecules into high-density (kilo-giga-density), ordered arrays on a chip surface with µm-order precision. This holistic aim, which is difficult to achieve using conventional printing and microarray approaches, is expected to revolutionize and reshape proteomics. This review is not written comprehensively, but rather substantively, highlighting the versatility of microintaglio printing for developing a prerequisite platform for microarray technology for the postgenomic era. 

Microintaglio Printing for Soft Lithography-Based in Situ Microarrays.

We describe a simple and affordable "Disposable electrode printed (DEP)-On-Go" sensing platform for the rapid on-site monitoring of trace heavy metal pollutants in environmental samples for early warning by developing a mobile electrochemical device composed of palm-sized potentiostat and disposable unmodified screen-printed electrode chips. We present the analytical performance of our device for the sensitive detection of major heavy metal ions, namely, mercury, cadmium, lead, arsenic, zinc, and copper with detection limits of 1.5, 2.6, 4.0, 5.0, 14.4, and, 15.5 μg·L, respectively. Importantly, the utility of this device is extended to detect multiple heavy metals simultaneously with well-defined voltammograms and similar sensitivity. Finally, "DEP-On-Go" was successfully applied to detect heavy metals in real environmental samples from groundwater, tap water, house dust, soil, and industry-processed rice and noodle foods. We evaluated the efficiency of this system with a linear correlation through inductively coupled plasma mass spectrometry, and the results suggested that this system can be reliable for on-site screening purposes. On-field applications using real samples of groundwater for drinking in the northern parts of India support the easy-to-detect, low-cost (<1 USD), rapid (within 5 min), and reliable detection limit (ppb levels) performance of our device for the on-site detection and monitoring of multiple heavy metals in resource-limited settings.

DEP-On-Go for Simultaneous Sensing of Multiple Heavy Metals Pollutants in Environmental Samples.

Biosensors employing single-walled carbon nanotube field-effect transistors (SWCNT FETs) offer ultimate sensitivity. However, besides the sensitivity, a high selectivity is critically important to distinguish the true signal from interference signals in a non-controlled environment. This work presents the first demonstration of the successful integration of a novel peptide aptamer with a liquid-gated SWCNT FET to achieve highly sensitive and specific detection of Cathepsin E (CatE), a useful prognostic biomarker for cancer diagnosis. Novel peptide aptamers that specifically recognize CatE are engineered by systemic in vitro evolution. The SWCNTs were firstly grown using the thermal chemical vapor deposition (CVD) method and then were employed as a channel to fabricate a SWCNT FET device. Next, the SWCNTs were functionalized by noncovalent immobilization of the peptide aptamer using 1-pyrenebutanoic acid succinimidyl ester (PBASE) linker. The resulting FET sensors exhibited a high selectivity (no response to bovine serum albumin and cathepsin K) and label-free detection of CatE at unprecedentedly low concentrations in both phosphate-buffered saline (2.3 pM) and human serum (0.23 nM). Our results highlight the use of peptide aptamer-modified SWCNT FET sensors as a promising platform for near-patient testing and point-of-care testing applications.

Peptide aptamer-modified single-walled carbon nanotube-based transistors for high-performance biosensors.

With the development of various methods for affinity-based selection of proteins such as phage display, ribosomal display, and mRNA display, the progress in this field has been gradually shifting to function-based selection, such as through single-molecule observation, genetic selection, and compartmentalization technologies. In this vein, we present an opposite link mode of mRNA display termed as a 'Head-to-Head' (H2H) link. The key technique in H2H, formation of a covalent bond between O-benzylguanine (BG) and O-alkylguanine-DNA alkyltransferase (AGT), was demonstrated to be workable in H2H ligation, where mRNA is linked to a nascent AGT via a BG-DNA linker, resulting in a "(C-terminus) protein-BG-DNA linker-mRNA (5'-terminus)" conjugate. Thus, a head (N-terminus) to head (5'-terminus) linkage is formed. Among the advantages of H2H, the generation of multi-copied proteins is the most promising and was proven to be possible owing to the restored stop codon, which had been intentionally removed in the conventional mRNA display. Another advantage is obviously having a free C-terminus of the protein, which can be used for modifications such as C-terminal methylation, α-amidation, and others, which occur in nature. A superior merit of H2H is that it makes it possible to use a single construct commonly in mRNA display (affinity-based) and compartmentalization technologies (function-based) without requiring complicated construct changes.

'Head-to-Head' mRNA display for the translation of multi-copied proteins with a free C-terminus.

The SELEX (Systematic Evolution of Ligands by EXponential enrichment) method has been used successfully since 1990, but work is still required to obtain highly specific aptamers. Here, we present a novel approach called 'Competitive non-SELEX' (and termed as 'SELCOS' (Systematic Evolution of Ligands by COmpetitive Selection)) for readily obtaining aptamers that can discriminate between highly similar targets. This approach is based on the theoretical background presented here, in which under the co-presence of two similar targets, a specific binding type can be enriched more than a nonspecifically binding one during repetitive steps of partitioning with no PCR amplification between them. This principle was experimentally confirmed by the selection experiment for influenza virus subtype-specific DNA aptamers. Namely, the selection products (pools of DNA aptamers) obtained by SELCOS were subjected to a DEPSOR-mode electrochemical sensor, enabling the method to select subtype-specific aptamer pools. From the clonal analysis of these pools, only a few rounds of in vitro selection were sufficient to achieve the surprisingly rapid enrichment of a small number of aptamers with high selectivity, which could be attributed to the SELCOS principle and the given selection pressure program. The subtype-specific aptamers obtained in this manner had a high affinity (e.g., K = 82 pM for H1N1; 88 pM for H3N2) and negligible cross-reactivity. By making the H1N1-specific DNA aptamer a sensor unit of the DEPSOR electrochemical detector, an influenza virus subtype-specific and portable detector was readily constructed, indicating how close it is to the field application goal.

Competitive non-SELEX for the selective and rapid enrichment of DNA aptamers and its use in electrochemical aptasensor.

Recombinase polymerase amplification (RPA) is an isothermal reaction that amplifies a target DNA sequence with a recombinase, a single-stranded DNA-binding protein (SSB), and a strand-displacing DNA polymerase. In this study, we optimized the reaction conditions of RPA to detect SARS-CoV-2 DNA and RNA using a statistical method to enhance the sensitivity. In vitro synthesized SARS-CoV-2 DNA and RNA were used as targets. After evaluating the concentration of each component, the uvsY, gp32, and ATP concentrations appeared to be rate-determining factors. In particular, the balance between the binding and dissociation of uvsX and DNA primer was precisely adjusted. Under the optimized condition, 60 copies of the target DNA were specifically detected. Detection of 60 copies of RNA was also achieved. Our results prove the fabrication flexibility of RPA reagents, leading to an expansion of the use of RPA in various fields.

Optimization of reaction condition of recombinase polymerase amplification to detect SARS-CoV-2 DNA and RNA using a statistical method.

Simple tests of infectiousness that return results in minutes and directly from samples even with low viral loads could be a potential game-changer in the fight against COVID-19. Here, we describe an improved isothermal nucleic acid amplification assay, termed the RICCA (RNA Isothermal Co-assisted and Coupled Amplification) reaction, that consists of a simple one-pot format of 'sample-in and result-out' with a primary focus on the detection of low copy numbers of RNA virus directly from saliva without the need for laboratory processing. We demonstrate our assay by detecting 16S rRNA directly from E. coli cells with a sensitivity as low as 8 CFU/μL and RNA fragments from a synthetic template of SARS-CoV-2 with a sensitivity as low as 1740 copies/μL. We further demonstrate the applicability of our assay for real-time testing at the point of care by designing a closed format for paper-based lateral flow assay and detecting heat-inactivated SARS-COV-2 virus in human saliva at concentrations ranging from 28,000 to 2.8 copies/μL with a total assay time of 15-30 min.

Manish Biyani

Department of Bioscience and Biotechnology

Japan Advanced Institute of Science and Technology

A Nonsequencing Approach for the Rapid Detection of RNA Editing

Manish Biyani

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Bioscience and Biotechnology

Japan Advanced Institute of Science and Technology

A Nonsequencing Approach for the Rapid Detection of RNA Editing

Department of Bioscience and Biotechnology