analyzing fluorescence in lung cancer tissue samples stained with optimized multiplex immunohistochemistry (mihc) technique

Akciğer Skuamöz Karsinomunda mIHC Kullanılarak Tümör Mikroçevresinin Deşifre Edilmesi

Tyramine signal amplification (TSA), which has a history of more than 20 years, is a class of assay techniques that use horseradish peroxidase (HRP) for high-density in situ labeling of target antigens and is widely applied in enzyme-linked immunosorbent assays (ELISAs), in situ hybridization (ISH), immunohistochemistry (IHC), and other techniques for the detection of biological antigens, substantially improving the sensitivity of the detected signal1. Opal polychromatic staining based on TSA technology has been recently developed and widely used in several studies2,3,4,5. Traditional immunofluorescence (IF) staining provides researchers with an easy tool for the detection and comparison of the distribution of proteins in the cells and tissues of various model organisms. It is based on antibody-/antigen-specific binding and includes direct and indirect approaches6. Direct immunostaining involves the use of a fluorophore-conjugated primary antibody against the antigen of interest, which enables direct fluorescent detection using a fluorescence microscope. The indirect immunostaining approach involves the application of a fluorophore-conjugated secondary antibody against the unconjugated primary antibody6,7.
Traditional, single-label, immunofluorescence staining methods can stain only one, two, or in some cases, three antigens in tissues, which is a major limitation in mining the rich information contained in tissue sections. The interpretation of quantitative results often depends on visual observation and accurate quantification by imaging software, such as ImageJ. There are technical limitations, such as antibody species restriction, weak fluorescent label signals, and fluorescent dye color overlap (Table 1). The Opal multiplex IHC (mIHC) technique is based on TSA derivation, which allows multiplex staining and differential labeling of more than 7-9 antigens on the same tissue section, with no restriction on the origin of the primary antibody, but requires high specificity of the corresponding antibody against the antigen. The staining procedure is similar to that of normal immunofluorescence staining, except for two differences: each round of staining involves the use of only one antibody and an antibody elution step is added. Antibodies bound to the antigen by noncovalent bonds can be removed by microwave elution, but the TSA fluorescent signal bound to the surface of the antigen by covalent bonds is retained.
Activated tyramine (T) molecules labeled with the dye are highly enriched at the target antigen, allowing efficient amplification of the fluorescent signal. This allows direct labeling of the antigen without antibody interference, and then multicolor labeling can be achieved after multiple staining cycles8,9,10 (Figure 1). Although this technology produces reliable and accurate images for the study of disease, the creation of a useful multiplex fluorescent immunohistochemistry (mfIHC) staining strategy can be time-consuming and exacting due to the need for extensive optimization and design. Therefore, this multiplex panel protocol has been optimized in an automated IHC stainer with a shorter staining time than that of the manual protocol. This approach can be directly applied and adapted by any researcher for immuno-oncology studies on human formalin-fixed and paraffin-embedded (FFPE) tissue samples11. Moreover, the methods for slide preparation, antibody optimization, and multiplex design will be helpful in obtaining robust images that represent accurate cellular interactions in situ and to shorten the optimization period for manual analysis12.
The mfIHC mainly includes image acquisition and data analysis. In terms of image acquisition, multicolor-labeled complex-stained samples need to be detected with professional spectral imaging equipment to identify the various mixed color signals and obtain high signal-to-noise images without interference from tissue autofluorescence. Current equipment for spectral imaging mainly includes spectral confocal microscopes and multispectral tissue imaging systems. The multispectral tissue imaging system is a professional imaging system designed for the quantitative analysis of tissue sections, and its most important feature is the acquisition of image spectral information, which provides both morphological structure and optical mapping information of biological tissue samples13,14. Any pixel in the spectral image contains a complete spectral curve, and each dye (including autofluorescence) has its corresponding characteristic spectrum, which enables the complete recording and accurate identification of mixed and overlapping multilabel signals.
In terms of data analysis, multicolor-labeled samples are extremely complex due to the morphological structure and constituent cells of the tissue samples. Ordinary software cannot automatically identify different tissue types. Hence, intelligent quantitative tissue analysis software is used for quantitative analysis of antigen expression in specific regions15,16,17,18.
Above all, multilabel immunofluorescence staining fused with multispectral imaging and quantitative pathology analysis technology has the advantages of a large number of detection targets, effective staining, and accurate analysis, and it can therefore significantly improve the accuracy of histomorphological analysis, reveal the spatial relationship between proteins with cellular-level resolution, and help to mine richer and more reliable information from tissue section samples19 (Table 1).

Yazar Spotlight: Akciğer Karsinomu Örneğinde Çok Renkli Floresan Lokalizasyonunun Geliştirilmesi

Parafine Gömülü Akciğer Kanseri Dokusu için Multipleks İmmünohistokimya Boyama

Our research focused on optimizing the mIHC protocol on paraffin section obtained from clinic sources. We aimed to effectively address autofluorescence and autofluorescence channel crosstalk issues in lung tissue. The current experimental challenges we are facing involve addressing the issues of autofluorescence and channel crosstalk in lung tissue, whereby achieving successful multicolor fluorescence localization they need for labeled target cells and proteins.Our highly efficient multiple antigen in situ labeling method, which requires less than three hours per antibody, seamlessly integrates a multispectral imaging system and a specialized pathology software. This optimized mIHC protocol is easily adaptable for use in other research laboratories.

Optimize Edilmiş Multipleks İmmünohistokimya (mIHC) Tekniği ile Boyanan Akciğer Kanseri Doku Örneklerinde Floresan Analizi

Başlamak için, önceden hazırlanmış lekeli akciğer kanseri dokusu örnek slaytlarını edinin. Lekeli slaytların otomatik olarak taranması için, her floresan kanalı için pozlama süresini ve tarama programını manuel olarak ayarlayın. Orijinal taramadan elde edilen çok renkli floresan görüntü dosyasını yazılıma sürükleyin ve görüntü türünü floresan olarak ayarlayın.Parlaklık ve kontrast düğmesini tıklatın ve paneldeki kanalları kontrol edin. İlgilendiğiniz floresan kanalını seçmek için dışını ve ardından kanalı tıklatın. Her kanalın parlaklığını ve kontrastını ayarlamak için minimum ekranı ve maksimum ekranı sürükleyin.Kaydedilecek görünüm belirlendikten sonra, bu iki içeriği kaldırmak ve ölçek çubuğunu tutmak için slayta genel bakışı göster ve imleç konumunu göster'e tıklayın. Bir PNG dosyasını dışa aktarmak için dosyayı ve ardından anlık görüntüyü ve geçerli görüntüleyici içeriğini dışa aktar'ı tıklayın. Küçük hücreli dışı akciğer skuamöz karsinom dokuları, makrofajların ve CD sekiz pozitif T hücrelerinin karsinom odaklarının çevresine ve içine önemli ölçüde sızdığını gösterdi.HMGCS1 proteini, skuamöz karsinom hücreli plazmada yaygın ekspresyon sergiledi.

analyzing-fluorescence-lung-cancer-tissue-samples-stained-with

Research

JoVE Journal

Cancer Research

Analyzing Fluorescence in Lung Cancer Tissue Samples Stained with Optimized Multiplex Immunohistochemistry (mIHC) Technique

84 Görüntüleme.  Sichuan University. Başlamak için, önceden hazırlanmış lekeli akciğer kanseri dokusu örnek slaytlarını edinin. Lekeli slaytların otomatik olarak taranması için, her floresan kanalı için pozlama süresini ve tarama programını manuel olarak ayarlayın. Orijinal taramadan elde edilen çok renkli floresan görüntü dosyasını yazılıma sürükleyin ve görüntü türünü floresan olarak ayarlayın.Parlaklık ve kontrast düğmesini tıklatın ve paneldeki kanalları kontrol edin. İlgilen...

Video: Optimize Edilmiş Multipleks İmmünohistokimya (mIHC) Tekniği ile Boyanan Akciğer Kanseri Doku Örneklerinde Floresan Analizi

Multiplex Immunohistochemistry Staining for Paraffin-embedded Lung Cancer Tissue

Lung cancer is the leading cause of malignant tumor-related morbidity and mortality all over the world, and the complex tumor microenvironment has been considered the leading cause of death in lung cancer patients. The complexity of the tumor microenvironment requires effective methods to understand cell-to-cell relationships in tumor tissues. The multiplex immunohistochemistry (mIHC) technique has become a key tool for inferring the relationship between the expression of proteins upstream and downstream of signaling pathways in tumor tissues and developing clinical diagnoses and treatment plans. mIHC is a multi-label immunofluorescence staining method based on Tyramine Signal Amplification (TSA) technology, which can simultaneously detect multiple target molecules on the same tissue section sample to achieve different protein co-expression and co-localization analysis. In this experimental protocol, paraffin-embedded tissue sections of lung squamous carcinoma of clinical origin were subjected to multiplex immunohistochemical staining. By optimizing the experimental protocol, multiplex immunohistochemical staining of labeled target cells and proteins was achieved, solving the problem of autofluorescence and channel crosstalk in lung tissues. In addition, multiplex immunohistochemical staining is widely used in the experimental validation of tumor-related, high-throughput sequencing, including single-cell sequencing, proteomics, and tissue space sequencing, providing intuitive and visual pathology validation results.

This experimental protocol describes and optimizes a multiplex immunohistochemistry (IHC) staining method, mainly by optimizing single-channel antibody incubation conditions and adjusting the settings of antibodies and channels to solve the problems of autofluorescence and channel crosstalk in lung cancer tissues of clinical origin.

Lung cancer is the leading cause of malignant tumor-related morbidity and mortality all over the world, and the complex tumor microenvironment has been ...

Kanser Araştırmaları

Optimizing Multiplex Immunohistochemistry (mIHC) Staining for Lung Cancer Tissue Samples to Address Autofluorescence Issues

To begin, obtain previously prepared formula and fixed and paraffin embedded lung cancer tissue sample slide. Incubate it at 65 degrees Celsius for five minutes. Perform dehydration by immersing the slide in xylene, followed by ethanol solutions of decreasing concentrations.Then immerse the slides in sterilized water three times for one minute each. For antigen retrieval, place the slide in a staining and repair box. Fill it with immunohistochemical antigen repair buffer working solution of pH six or nine.Cover the box with a lid, and heat it in a microwave oven for eight minutes at 100%power. Then cool the slide to room temperature. Cover the tissue with a blocking solution, and then incubate in a humidified chamber at room temperature for 10 minutes.After removing the blocking solution, cover the slide with the primary antibody working solution, and place it in a humidified chamber. Then incubate this chamber for one hour at 37 degrees Celsius. Next, wash the slide with wash buffer working solution for two minutes.Add polymer horseradish peroxidase directly dropwise onto the slide, and incubate it for 15 minutes at room temperature. After washing the slide, add fluorophore working solution directly dropwise onto the slide, and incubate it for 10 minutes at room temperature. Once the slide is washed, give microwave treatment as demonstrated previously.When the slide is cooled to room temperature, wash it three times with double distilled water for one minute each. Next, dip the slide in the wash buffer working solution for two minutes, and perform antibody incubation, horseradish peroxidase, and fluorophore addition as demonstrated. For cell nuclear staining, cover the slide with DAPI working solution and incubate it in a humidified chamber for five minutes at room temperature.Then wash the slides with double distilled water three times, one minute each. Remove water droplets from the slide. Add 10 to 20 microliters of anti-fluorescence quencher to the slide, and seal it with a microscope cover glass.

Otofloresan Sorunlarını Ele Almak için Akciğer Kanseri Doku Örnekleri için Multipleks İmmünohistokimya (mIHC) Boyamanın Optimize Edilmesi

To begin, obtain previously prepared stained lung cancer tissue sample slides. For automatic scanning of the stained slides, manually set the exposure time and scanning program for each fluorescence channel. Drag the multicolor fluorescence image file obtained from the original scan into the software and set the image type to fluorescence.Click the brightness and contrast button and check the channels on the panel. Click outside and then on the channel to select the fluorescence channel of interest. Drag the minimum display and maximum display to adjust the brightness and contrast of each channel.Once the view to be saved is determined, click on show slide overview and show cursor location to remove these two contents and keep the scale bar. Click file followed by export snapshot and current viewer content To export a PNG file. The non-small cell lung squamous carcinoma tissues showed that macrophages and CD eight positive T-cells significantly infiltrated around and within carcinoma foci.HMGCS1 protein exhibited widespread expression in squamous carcinoma cell plasma.