Sonja Schrepfer, Lenard Conradi and Arne Hansen received funding from the Deutsche Forschungsgemeinschaft (DFG; SCHR992/3-1, SCHR992/4-1, CO 858/1-1, HA 3423/3-1). The work was also supported by grants from the European Union to Thomas Eschenhagen (EUGeneHeart and Angioscaff).

1. EHT Generation and Culture Conditions
Manufacture of fibrin-based EHT was performed as described elsewhere 4. In brief, to generate fibrin-based EHT for implantation purposes, a master mix was prepared containing cells isolated from neonatal ROSA/luciferase-LEW transgenic rat hearts, bovine fibrinogen and Matrigel. Agarose casting molds were prepared using Teflon spacers placed in 6-well culture dishes. After solidification of agarose, spacers were removed and silicone post racks were placed on culture dishes with posts reaching into the molds. To generate EHT, the mastermix was briefly mixed with a calculated amount of thrombin and pipetted into the mold. After polymerisation of fibrinogen, silicone racks with EHTs adhering to the posts were gently removed from the agarose casting molds, transferred to new 6-well cell culture dishes and maintained in a 37&deg;C, 7% CO2 cell culture incubator using custom-made cell culture medium.
EHT were kept under cell culture conditions until day ten. During this time span, neonatal rat heart cells began to elongated, interconnect and align along force lines in between silicone posts. At the time of implantation, spontaneous coherent contractions were observed, deflecting silicone posts.
2. EHT Implantation
EHT implantation was performed in either immunocompetent Brown Norway (BN) rats, or immunodeficient nude rats to investigate the allogeneic immune response. BN and nude rats weighing 100 - 150 g were purchased from Charles River Germany (Sandhofer Weg 7, D-97633 Sulzfeld) and housed under conventional conditions, fed standard rat chow and water ad libidum. Immunodeficient rats are housed in sterile bedding, cages, and sterilized water is used. The German ethical review committee reviewed and approved the animal procedures. All surgical instruments are sterilized prior to use.
The implantation procedure are performed as follows:
Rat are anesthesized with isoflurane (2.5-3%) using an induction chamber. Human exposure to isoflurane can be reduced by working in a downdraft table or non-recirculating hood. Body temperature is maintained during the surgical procedure.
<ol>
	<li>Shave abdominal area and apply eye ointment to prevent the eyes from drying during anesthesia.</li>
	<li>Place the rat on its back and place a facemask over its nose and mouth to keep up the anesthesia.</li>
	<li>Disinfect the abdominal area using Betadine and then 80% ethanol. Swab from clean to dirty, from center of shaved area moving outward toward the haired area.</li>
	<li>Check reflexes pinching the hind feet to be sure that the rat is sufficiently anesthetized.</li>
	<li>Drape the animal and perform a midline abdominal incision separating the skin and muscle in two steps to open the abdomen. Hot bead sterilization is used between skin and muscle opening.</li>
	<li>Place the intestines in a warmed saline moisturized powder free glove. Fold the glove around the intestines to prevent loss of moisture.</li>
	<li>Remove fatty tissue and expose the spleen.</li>
	<li>Visualize and spread greater omentum with forceps.</li>
	<li>Carefully cut EHT from suspending silicone posts and transfer onto the greater omentum.</li>
	<li>Wrap the greater omentus around the EHT and fix using two single 7-0 prolene sutures (Ethicon, Norderstedt, Germany)</li>
	<li>Next move the intestines back into the abdomen.</li>
	<li>Flush the abdomen with prewarmed sterile saline.</li>
	<li>Close the muscle layer of the abdominal wall using 6-0 prolene running sutures (Ethicon, Norderstedt, Germany).</li>
	<li>Use 5-0 prolene (Ethicon, Norderstedt, Germany) running sutures to close the skin.</li>
	<li>While the rat is still in anesthesia, inject 5 mg/kg Carprofen subcutaneously.</li>
	<li>To provide sufficient analgesia for this type of procedure, an analgesic (such as Metamizol) is added to the drinking water (50 mg Metamizol per 100 ml) for pain medication for 3 days post transplantation.</li>
</ol>
3. Bioluminescence Imaging of EHT Following Implantation
The IVIS bioimaging platform (Xenogen, Alameda, CA, USA) is used for non-invasive bioluminescence imaging in-vivo and results are analyzed using the IVIS Living Image (Xenogen) software package. Imaging is performed daily starting 2 hours postoperatively.
Anesthetize rat with isoflurane (2.5 - 3%) using an induction chamber.
<ol>
	<li>Disinfect the abdominal and thoracic area widely using Provo-Iodine, next use 80% ethanol, repeat this step three times.</li>
	<li>Inject d-Luciferin (Xenogen; 375 mg/kg body weight) i.p.</li>
	<li>Place anaesthetized rats into the IVIS imaging chamber (up to 4 rats can be analysed at the same time).</li>
	<li>Assess signal intensity of luc+ cells inside EHT in units of photons/sec/cm2/steridianin the region of interest (ROI) at baseline (120 minutes after implantation) and at days 1, 2, 3, 5, 7, 10, and at weeks 2, 3 and 4. Note the peak signal (appears around 20 minutes after d-Luciferin injection).</li>
</ol>
Create a graph (Excel) showing the signal intensity over time.
4. Correlation of BLI Results and ELISPOT
The cellular in-vivo immune responses in immunocompetent BN and immunodeficient nude rats were studied after EHT transplantation. The spleen of recipient animals was harvested 5 days after EHT transplantation to isolate recipient splenocytes. Elispot assays using mitomycin-inhibited EHTs (Sigma Aldrich, St. Louis, MO, USA) as stimulator and 5 x106 recipient splenocytes as responder cells were performed according to the manufacturer's protocol (BD Biosciences) using IFN-&gamma; and IL-4 coated plates to investigate TH1-, and TH2 response, respectively. IFN-&gamma;- and IL-4 spots were significantly higher in the immunocompetent, model compared to the immunodeficient model (IFN-&gamma;: p= 0.001; IL-4: p=0.023; Student's t-test).
5. Representative Results:
<img src="/files/ftp_upload/2605/2605fig1.jpg" alt="Figure 1" /> 
Figure 1. Correlation of BLI results and ELISPOT a) The cellular in vivo immune responses in immunocompetent Brown Norway and immunodeficient nude rats were studied after EHT implantation. Recipient splenocytes were harvested 5 days after EHT implantation. IFN? and IL-4 expression was evaluated by ELISpot assays using mitomycin-inhibited EHT as stimulators and 5x106 recipient splenocytes as responder cells. Th1 and Th2 responses were significantly higher in the immunocompetent model compared to the immunodeficient model as evidenced by IFN&gamma;- and IL-4 production respectively. b) Luc+ EHTs were transplanted into the greater omentus of either immunocompetent BN rats or immunodeficient nude rats. Cell survival was longitudinally followed by BLI. The rate of animals that rejected the transplanted EHTs is presented. All BN rats rapidly rejected the EHT transplants, whereas the cells survived in T cell deficient rats.

<ol>
	<li>Eschenhagen, T., Zimmermann, W. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+myocardial+tissue.">Engineering myocardial tissue.</a> Circ Res. 97, 1220-1231 (2005).</li><li>van der Bogt, K. E., Schrepfer, S., Yu, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+transplantation+of+adipose+tissue-+and+bone+marrow-derived+mesenchymal+stem+cells+in+the+infarcted+heart.">Comparison of transplantation of adipose tissue- and bone marrow-derived mesenchymal stem cells in the infarcted heart.</a> Transplantation. 87, 642-652 (2009).</li><li>Hakamata, Y., Murakami, T., Kobayashi, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term="Firefly+rats"+as+an+organ/cellular+source+for+long-term+in+vivo+bioluminescent+imaging.">"Firefly rats" as an organ/cellular source for long-term in vivo bioluminescent imaging.</a> Transplantation. 81, 1179-1184 (2006).</li><li>Hansen, A., Eder, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+Drug+Screening+Platform+Based+on+Engineered+Heart+Tissue.">Development of a Drug Screening Platform Based on Engineered Heart Tissue.</a> Circ Res. , (2010).</li></ol>

No conflicts of interest declared.

Before clinical implementation of EHT technology for cardiac repair, fundamental questions such as immunogenicity of both cellular and matrix components or graft survival after implantation need to be assessed in experimental models. In-vivo bioluminescence imaging represents a useful new technique for monitoring cell survival after transplantation. We successfully generated fibrin-based EHT containing luciferase positive (luc+) heart cells by adaptation of an established protocol 4. These EHT were im...

<ul>
	<li>LEW-Tg(Gt(ROSA)26Sor-luc)11Jmsk rats (NBPR rat number 0299, http://www.anim.med.kyoto-u.ac.jp/NBR/)</li>
	<li>Bovine fibrinogen (stock solution: 200 mg/ml plus aprotinin 5 &mu;g/ml fibrinogen in NaCl 0.9%, Sigma F4753)</li>
	<li>Matrigel (BD Bioscience 356235)</li>
	<li>DMEM (Biochrome F0415)</li>
	<li>Horse serum (Gibco 26050)</li>
	<li>Penicillin/streptomycin (Gibco 15140)</li>
	<li>Insulin (Sigma-Aldrich I9278)</li>
	<li>Aprotinin (Sigma Aldrich A1153)</li>
	<li>d-Luciferin (Biosynth L-8220)</li>
	<li>Enzyme-linked immunosorbent spot (ELISpot) assay plates (Hassa Laborbedarf, S2EM004M99)</li>
</ul>

bioluminescence imaging for assessment of immune responses following implantation of engineered heart tissue (eht)

Various techniques of cardiac tissue engineering have been pursued in the past decades including scaffolding strategies using either native or bioartificial scaffold materials, entrapment of cardiac myocytes in hydrogels such as fibrin or collagen and stacking of myocyte monolayers 1. These concepts aim at restoration of compromised cardiac function (e.g. after myocardial infarction) or as experimental models (e.g. predictive toxicology and substance screening or disease modelling). Precise monitoring of cell survival after implantation of engineered heart tissue (EHT) has now become possible using in-vivo bioluminescence imaging (BLI) techniques 2. Here we describe the generation of fibrin-based EHT from a transgenic rat strain with ubiquitous expression of firefly luciferase (ROSA/luciferase-LEW Tg; 3). Implantation is performed into the greater omentum of different rat strains to assess immune responses of the recipient organism following EHT implantation. Comparison of results generated by BLI and the Enzyme Linked Immuno Spot Technique (ELISPOT) confirm the usability of BLI for the assessment of immune responses.

Watch this Scientific Journal Video about Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue EHT at JoVE.com

Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue EHT

This video demonstrates the use of in vivo bioluminescence imaging to study immune responses after implantation of Engineered Heart Tissue (EHT) in rats.

Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue (EHT)

Various techniques of cardiac tissue engineering have been pursued in the past decades including scaffolding strategies using either native or ...

bioluminescence-imaging-for-assessment-immune-responses-following

Research

JoVE Journal

Bioengineering

9.6K Views.  University Heart Center Hamburg. This video demonstrates the use of in vivo bioluminescence imaging to study immune responses after implantation of Engineered Heart Tissue (EHT) in rats.

Video: Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue EHT

Magnetic Resonance Elastography Methodology for the Evaluation of Tissue Engineered Construct Growth

Traditional mechanical testing often results in the destruction of the sample, and in the case of long term tissue engineered construct studies, the use of destructive assessment is not acceptable. A proposed alternative is the use of an imaging process called magnetic resonance elastography. Elastography is a nondestructive method for determining the engineered outcome by measuring local mechanical property values (i.e., complex shear modulus), which are essential markers for identifying the structure and functionality of a tissue. As a noninvasive means for evaluation, the monitoring of engineered constructs with imaging modalities such as magnetic resonance imaging (MRI) has seen increasing interest in the past decade1. For example, the magnetic resonance (MR) techniques of diffusion and relaxometry have been able to characterize the changes in chemical and physical properties during engineered tissue development2. The method proposed in the following protocol uses microscopic magnetic resonance elastography (&mu;MRE) as a noninvasive MR based technique for measuring the mechanical properties of small soft tissues3. MRE is achieved by coupling a sonic mechanical actuator with the tissue of interest and recording the shear wave propagation with an MR scanner4. Recently, &mu;MRE has been applied in tissue engineering to acquire essential growth information that is traditionally measured using destructive mechanical macroscopic techniques5. In the following procedure, elastography is achieved through the imaging of engineered constructs with a modified Hahn spin-echo sequence coupled with a mechanical actuator. As shown in Figure 1, the modified sequence synchronizes image acquisition with the transmission of external shear waves; subsequently, the motion is sensitized through the use of oscillating bipolar pairs. Following collection of images with positive and negative motion sensitization, complex division of the data produce a shear wave image. Then, the image is assessed using an inversion algorithm to generate a shear stiffness map6. The resulting measurements at each voxel have been shown to strongly correlate (R2&gt;0.9914) with data collected using dynamic mechanical analysis7. In this study, elastography is integrated into the tissue development process for monitoring human mesenchymal stem cell (hMSC) differentiation into adipogenic and osteogenic constructs as shown in Figure 2.

The procedure demonstrates the methodology of magnetic resonance elastography for monitoring the engineered outcome of adipose and osteogenic tissue engineered constructs through noninvasive local assessment of the mechanical properties using microscopic magnetic resonance elastography (&mu;MRE).

Traditional mechanical testing often results in the destruction of the sample, and in the case of long term tissue engineered construct studies, the use ...

Protocol for Relative Hydrodynamic Assessment of Tri-leaflet Polymer Valves

Limitations of currently available prosthetic valves, xenografts, and homografts have prompted a recent resurgence of developments in the area of tri-leaflet polymer valve prostheses. However, identification of a protocol for initial assessment of polymer valve hydrodynamic functionality is paramount during the early stages of the design process. Traditional in vitro pulse duplicator systems are not configured to accommodate flexible tri-leaflet materials; in addition, assessment of polymer valve functionality needs to be made in a relative context to native and prosthetic heart valves under identical test conditions so that variability in measurements from different instruments can be avoided. Accordingly, we conducted hydrodynamic assessment of i) native (n = 4, mean diameter, D = 20 mm), ii) bi-leaflet mechanical (n= 2, D = 23 mm) and iii) polymer valves (n = 5, D = 22 mm) via the use of a commercially available pulse duplicator system (ViVitro Labs Inc, Victoria, BC) that was modified to accommodate tri-leaflet valve geometries. Tri-leaflet silicone valves developed at the University of Florida comprised the polymer valve group. A mixture in the ratio of 35:65 glycerin to water was used to mimic blood physical properties. Instantaneous flow rate was measured at the interface of the left ventricle and aortic units while pressure was recorded at the ventricular and aortic positions. Bi-leaflet and native valve data from the literature was used to validate flow and pressure readings. The following hydrodynamic metrics were reported: forward flow pressure drop, aortic root mean square forward flow rate, aortic closing, leakage&#160;and regurgitant volume, transaortic closing, leakage, and total energy losses. Representative results indicated that hydrodynamic metrics from the three valve groups could be successfully obtained by incorporating a custom-built assembly into a commercially available pulse duplicator system and subsequently, objectively compared to provide insights on functional aspects of polymer valve design.

There has been renewed interest in developing polymer valves. Here, the objectives are to demonstrate the feasibility of modifying a commercial pulse duplicator to accommodate tri-leaflet geometries and to define a protocol to present polymer valve hydrodynamic data in comparison to native and prosthetic valve data collected under near-identical conditions.

Limitations of currently available prosthetic valves, xenografts, and homografts have prompted a recent resurgence of developments in the area of ...

Surgical Technique for the Implantation of Tissue Engineered Vascular Grafts and Subsequent In Vivo Monitoring

The development of Tissue Engineered Vessels (TEVs) is advanced by the ability to routinely and effectively implant TEVs (4-5 mm in diameter) into a large animal model. A step by-step protocol for inter-positional placement of the TEV and real-time digital assessment of the TEV and native carotid arteries is described here. In vivo monitoring is made possible by the implantation of flow probes, catheters and ultrasonic crystals (capable of recording dynamic diameter changes of implanted TEVs and native carotid arteries) at the time of surgery. Once implanted, researchers can calculate arterial blood flow patterns, invasive blood pressure and artery diameter yielding parameters such as pulse wave velocity, augmentation index, pulse pressures and compliance. Data acquisition is accomplished using a single computer program for analysis throughout the duration of the experiment. Such invaluable data provides insight into TEV matrix remodeling, its resemblance to native/sham controls and overall TEV performance in vivo.

Surgical Technique for the Implantation of Tissue Engineered Vascular Grafts and Subsequent In Vivo Monitoring

A step-by-step protocol for the inter-positional placement of Tissue Engineered Vessels (TEVs) into the carotid artery of a sheep using end-to-end anastomosis and real-time digital assessment in vivo until animal sacrifice.

The development of Tissue Engineered Vessels (TEVs) is advanced by the ability to routinely and effectively implant TEVs (4-5 mm in diameter) into a large ...

Generation and Grafting of Tissue-engineered Vessels in a Mouse Model

The construction of vascular conduits is a fundamental strategy for surgical repair of damaged and injured vessels resulting from cardiovascular diseases. The current protocol presents an efficient and reproducible strategy in which functional tissue engineered vessel grafts can be generated using partially induced pluripotent stem cell (PiPSC) from human fibroblasts. We designed a decellularized vessel scaffold bioreactor, which closely mimics the matrix protein structure and blood flow that exists within a native vessel, for seeding of PiPSC-endothelial cells or smooth muscle cells prior to grafting into mice. This approach was demonstrated to be advantageous because immune-deficient mice engrafted with the PiPSC-derived grafts presented with markedly increased survival rate 3 weeks after surgery. This protocol represents a valuable tool for regenerative medicine, tissue engineering and potentially patient-specific cell-therapy in the near future.

Here, we present a protocol to generate tissue engineered vessel grafts that are functional for grafting into mice by double seeding partially induced pluripotent stem cell (PiPSC) - derived smooth muscle cells and PiPSC - derived endothelial cells on a decellularized vessel scaffold bioreactor.

The construction of vascular conduits is a fundamental strategy for surgical repair of damaged and injured vessels resulting from cardiovascular diseases. ...

Production, Characterization and Potential Uses of a 3D Tissue-engineered Human Esophageal Mucosal Model

The incidence of both esophageal adenocarcinoma and its precursor, Barrett&#8217;s Metaplasia, are rising rapidly in the western world. Furthermore esophageal adenocarcinoma generally has a poor prognosis, with little improvement in survival rates in recent years. These are difficult conditions to study and there has been a lack of suitable experimental platforms to investigate disorders of the esophageal mucosa.
A model of the human esophageal mucosa has been developed in the MacNeil laboratory which, unlike conventional 2D cell culture systems, recapitulates the cell-cell and cell-matrix interactions present in vivo and produces a mature, stratified epithelium similar to that of the normal human esophagus. Briefly, the model utilizes non-transformed normal primary human esophageal fibroblasts and epithelial cells grown within a porcine-derived acellular esophageal scaffold. Immunohistochemical characterization of this model by CK4, CK14, Ki67 and involucrin staining demonstrates appropriate recapitulation of the histology of the normal human esophageal mucosa.
This model provides a robust, biologically relevant experimental model of the human esophageal mucosa. It can easily be manipulated to investigate a number of research questions including the effectiveness of pharmacological agents and the impact of exposure to environmental factors such as alcohol, toxins, high temperature or gastro-esophageal refluxate components. The model also facilitates extended culture periods not achievable with conventional 2D cell culture, enabling, inter alia, the study of the impact of repeated exposure of a mature epithelium to the agent of interest for up to 20 days. Furthermore, a variety of cell lines, such as those derived from esophageal tumors or Barrett&#8217;s Metaplasia, can be incorporated into the model to investigate processes such as tumor invasion and drug responsiveness in a more biologically relevant environment.

This manuscript describes the production, characterization and potential uses of a tissue engineered 3D esophageal construct prepared from normal primary human esophageal fibroblast and squamous epithelial cells seeded within a de-cellularized porcine scaffold. The results demonstrate the formation of a mature stratified epithelium similar to the normal human esophagus.

The incidence of both esophageal adenocarcinoma and its precursor, Barrett&#8217;s Metaplasia, are rising rapidly in the western world. Furthermore ...

Engineered 3D Silk-collagen-based Model of Polarized Neural Tissue

Despite huge efforts to decipher the anatomy, composition and function of the brain, it remains the least understood organ of the human body. To gain a deeper comprehension of the neural system scientists aim to simplistically reconstruct the tissue by assembling it in vitro from basic building blocks using a tissue engineering approach. Our group developed a tissue-engineered silk and collagen-based 3D brain-like model resembling the white and gray matter of the cortex. The model consists of silk porous sponge, which is pre-seeded with rat brain-derived neurons, immersed in soft collagen matrix. Polarized neuronal outgrowth and network formation is observed with separate axonal and cell body localization. This compartmental architecture allows for the unique development of niches mimicking native neural tissue, thus enabling research on neuronal network assembly, axonal guidance, cell-cell and cell-matrix interactions and electrical functions.

Insight into the complex actions of the brain requires advanced research tools. Here we demonstrate a novel silk-collagen-based 3D engineered model of neural tissue resembling brain-like architecture. The model can be used to study neuronal network assembly, axonal guidance, cell-cell interactions and electrical activity.

Despite huge efforts to decipher the anatomy, composition and function of the brain, it remains the least understood organ of the human body. To gain a ...

Automated Contraction Analysis of Human Engineered Heart Tissue for Cardiac Drug Safety Screening

Cardiac tissue engineering describes techniques to constitute three dimensional force-generating engineered tissues. For the implementation of these procedures in basic research and preclinical drug development, it is important to develop protocols for automated generation and analysis under standardized conditions. Here, we present a technique to generate engineered heart tissue (EHT) from cardiomyocytes of different species (rat, mouse, human). The technique relies on the assembly of a fibrin-gel containing dissociated cardiomyocytes between elastic polydimethylsiloxane (PDMS) posts in a 24-well format. Three-dimensional, force-generating EHTs constitute within two weeks after casting. This procedure allows for the generation of several hundred EHTs per week and is technically limited only by the availability of cardiomyocytes (0.4-1.0 x 106/EHT). Evaluation of auxotonic muscle contractions is performed in a modified incubation chamber with a mechanical interlock for 24-well plates and a camera placed on top of this chamber. A software controls a camera moved on an XYZ axis system to each EHT. EHT contractions are detected by an automated figure recognition algorithm, and force is calculated based on shortening of the EHT and the elastic propensity and geometry of the PDMS posts. This procedure allows for automated analysis of high numbers of EHT under standardized and sterile conditions. The reliable detection of drug effects on cardiomyocyte contraction is crucial for cardiac drug development and safety pharmacology. We demonstrate, with the example of the hERG channel inhibitor E-4031, that the human EHT system replicates drug responses on contraction kinetics of the human heart, indicating it to be a promising tool for cardiac drug safety screening.

Here, we show the generation of human engineered heart tissue from induced pluripotent stem cells (hiPSC)-derived cardiomyocytes. We present a method to analyze contraction force and exemplary alteration of contraction pattern by the hERG channel inhibitor E-4031. This method shows high level of robustness and suitability for cardiac drug screening.

Cardiac tissue engineering describes techniques to constitute three dimensional force-generating engineered tissues. For the implementation of these ...

Three-dimensional Tissue Engineered Aligned Astrocyte Networks to Recapitulate Developmental Mechanisms and Facilitate Nervous System Regeneration

Neurotrauma and neurodegenerative disease often result in lasting neurological deficits due to the limited capacity of the central nervous system (CNS) to replace lost neurons and regenerate axonal pathways. However, during nervous system development, neuronal migration and axonal extension often occur along pathways formed by other cells, referred to as &#34;living scaffolds&#34;. Seeking to emulate these mechanisms and to design a strategy that circumvents the inhibitory environment of the CNS, this manuscript presents a protocol to fabricate tissue engineered astrocyte-based &#34;living scaffolds&#34;. To create these constructs, we employed a novel biomaterial encasement scheme to induce astrocytes to self-assemble into dense three-dimensional bundles of bipolar longitudinally-aligned somata and processes. First, hollow hydrogel micro-columns were assembled, and the inner lumen was coated with collagen extracellular-matrix. Dissociated cerebral cortical astrocytes were then delivered into the lumen of the cylindrical micro-column and, at a critical inner diameter of &#60;350 &#181;m, spontaneously self-aligned and contracted to produce long fiber-like cables consisting of dense bundles of astrocyte processes and collagen fibrils measuring &#60;150 &#181;m in diameter yet extending several cm in length. These engineered living scaffolds exhibited &#62;97% cell viability and were virtually exclusively comprised of astrocytes expressing a combination of the intermediate filament proteins glial-fibrillary acidic protein (GFAP), vimentin, and nestin. These aligned astrocyte networks were found to provide a permissive substrate for neuronal attachment and aligned neurite extension. Moreover, these constructs maintain integrity and alignment when extracted from the hydrogel encasement, making them suitable for CNS implantation. These preformed constructs structurally emulate key cytoarchitectural elements of naturally occurring glial-based &#34;living scaffolds&#34; in vivo. As such, these engineered living scaffolds may serve as test-beds to study neurodevelopmental mechanisms in vitro or facilitate neuroregeneration by directing neuronal migration and/or axonal pathfinding following CNS degeneration in vivo.

We showcase the development of self-assembled, three-dimensional bundles of longitudinally aligned astrocytic somata and processes within a novel biomaterial encasement. These engineered &#34;living scaffolds&#34;, exhibiting micron-scale diameter yet extending centimeters in length, may serve as test-beds to study neurodevelopmental mechanisms or facilitate neuroregeneration by directing neuronal migration and/or axonal pathfinding.

Neurotrauma and neurodegenerative disease often result in lasting neurological deficits due to the limited capacity of the central nervous system (CNS) to ...

Custom Engineered Tissue Culture Molds from Laser-etched Masters

As the field of tissue engineering has continued to mature, there has been increased interest in a wide range of tissue parameters, including tissue shape. Manipulating tissue shape on the micrometer to centimeter scale can direct cell alignment, alter effective mechanical properties, and address limitations related to nutrient diffusion. In addition, the vessel in which a tissue is prepared can impart mechanical constraints on the tissue, resulting in stress fields that can further influence both the cell and matrix structure. Shaped tissues with highly reproducible dimensions also have utility for in vitro assays in which sample dimensions are critical, such as whole tissue mechanical analysis.
This manuscript describes an alternative fabrication method utilizing negative master molds prepared from laser etched acrylic: these molds perform well with polydimethylsiloxane (PDMS), permit designs with dimensions on the centimeter scale and feature sizes smaller than 25 &#181;m, and can be rapidly designed and fabricated at a low cost and with minimal expertise. The minimal time and cost requirements allow for laser etched molds to be rapidly iterated upon until an optimal design is determined, and to be easily adapted to suit any assay of interest, including those beyond the field of tissue engineering.

Herein we present a rapid, facile, and low-cost method for fabricating custom polydimethylsiloxane molds that can be used for producing hydrogel-based engineered tissues with complex geometries. We additionally describe results from mechanical and histological assessments conducted on engineered cardiac tissues produced using this technique.

As the field of tissue engineering has continued to mature, there has been increased interest in a wide range of tissue parameters, including tissue ...

Seeding and Implantation of a Biosynthetic Tissue-engineered Tracheal Graft in a Mouse Model

Treatment options for congenital or secondary long segment tracheal defects have historically been limited due to an inability to replace functional tissue. Tissue engineering holds great promise as a potential solution with its ability to integrate cells and signaling molecules into a 3-dimensional scaffold. Recent work with tissue engineered tracheal grafts (TETGs) has seen some success but their translation has been limited by graft stenosis, graft collapse, and delayed epithelialization. In order to investigate the mechanisms driving these issues, we have developed a mouse model for tissue engineered tracheal graft implantation. TETGs were constructed using electrospun polymers polyethylene terephthalate (PET) and polyurethane (PU) in a mixture of PET and PU (20:80 percent weight). Scaffolds were then seeded using bone marrow mononuclear cells isolated from 6-8 week-old C57BL/6 mice by gradient centrifugation. Ten million cells per graft were seeded onto the lumen of the scaffold and allowed to incubate overnight before implantation between the third and seventh tracheal rings. These grafts were able to recapitulate the findings of stenosis and delayed epithelialization as demonstrated by histological analysis and lack of Keratin 5 and Keratin 14 basal epithelial cells on immunofluorescence. This model will serve as a tool for investigating cellular and molecular mechanisms involved in host remodeling.

Graft stenosis poses a critical obstacle in tissue engineered airway replacement. To investigate cellular mechanisms underlying stenosis, we utilize a murine model of tissue engineered tracheal replacement with seeded bone marrow mononuclear cells (BM-MNC). Here, we detail our protocol, including scaffold manufacturing, BM-MNC isolation, graft seeding, and implantation.

Treatment options for congenital or secondary long segment tracheal defects have historically been limited due to an inability to replace functional ...