JoVE Logo
Faculty Resource Center

Sign In

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing

DOI :

10.3791/53556-v

February 13th, 2016

February 13th, 2016

10,849 Views

1Department of Desalination and Water Treatment, Zuckerberg Institute for Water Research, Jacob Blaustein Institutes for Desert Research, Ben-Gurion University of the Negev, Sede-Boqer Campus

Design and fabrication of a three-dimensionally (3-D) printed microfluidic cross-flow filtration system is demonstrated. The system is used to test performance and observe fouling of ultrafiltration and nanofiltration (thin film composite) membranes.

Tags

Keywords 3D Printed

-- Views

Related Videos

article

Microfluidic Picoliter Bioreactor for Microbial Single-cell Analysis: Fabrication, System Setup, and Operation

article

Systematic Analysis of In Vitro Cell Rolling Using a Multi-well Plate Microfluidic System

article

Luminescence Resonance Energy Transfer to Study Conformational Changes in Membrane Proteins Expressed in Mammalian Cells

article

Multi-step Variable Height Photolithography for Valved Multilayer Microfluidic Devices

article

A High-performance Compact Photoacoustic Tomography System for In Vivo Small-animal Brain Imaging

article

A Performance-testing Platform for a Conduction Micropump with an FR-4 Copper-clad Electrode Plate

article

Microfluidic Model to Mimic Initial Event of Neovascularization

article

Mechanostimulation of Multicellular Organisms Through a High-Throughput Microfluidic Compression System

article

Microbial Control and Monitoring Strategies for Cleanroom Environments and Cellular Therapies (Video) | JoVE

article

Assembly and Priming of the 3D-Printed Bioreactor for Perfusion Culture (Video) | JoVE

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2024 MyJoVE Corporation. All rights reserved