Name: one-step approach to fabricating polydimethylsiloxane microfluidic channels of different geometric sections by sequential wet etching processes
Uploaded: 2018-09-13T14:00:00
Description: Watch this Scientific Journal Video about One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes at JoVE.com

The authors gratefully acknowledge the support provided by the National Health Research Institutes (NHRI) in Taiwan under the Innovative Research Grant (IRG) (EX106-10523EI), the Taiwan Ministry of Science and Technology (MOST 104-2218-E-032-004, 104-2221-E-001-015-MY3, 105-2221-E-001-002-MY2, 105-2221-E-032-006, 106-2221-E-032-018-MY2), and the Academia Sinica Career Development Award. The authors would like to thank Heng-Hua Hsu for proofreading the manuscript.

1. Fabrication of Microfluidic Devices with Single-Layer Channel Layouts
NOTE: In this paper, the soft lithography method3 is adopted for fabricating microfluidic devices made of PDMS materials, to demonstrate how to manufacture channels with various sections.
<ol>
	<li>Creation of master molds for a PDMS layer with designed topology features
	<ol>
		<li>Design channel layouts on a PDMS layer for a single etching process or etching in sequence.</li>
	...

<ol>
	<li>Tung, Y. -. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optofluidic+Detection+for+Cellular+Phenotyping.">Optofluidic Detection for Cellular Phenotyping.</a> Lab on a Chip. 12, 3552-3565 (2012).</li><li>Lu, Y., Yang, L., Wei, W., Shi, Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microchip-based+Single-cell+Functional+Proteomics+for+Biomedical+Applications.">Microchip-based Single-cell Functional Proteomics for Biomedical Applications.</a> Lab on a Chip. 17, 1250-1263 (2017).</li><li>Jensen, K. F., Reizman, B. J., Newman, S. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tools+for+Chemical+Synthesis+in+Microsystems.">Tools for Chemical Synthesis in Microsystems.</a> Lab on a Chip. 14, 3206-3212 (2014).</li><li>Chang, C. -. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Polydimethylsiloxane-polycarbonate+Hybrid+Microfluidic+Device+Capable+of+Generating+Perpendicular+Chemical+and+Oxygen+Gradients+for+Cell+Culture+Studies.">A Polydimethylsiloxane-polycarbonate Hybrid Microfluidic Device Capable of Generating Perpendicular Chemical and Oxygen Gradients for Cell Culture Studies.</a> Lab on a Chip. 14, 3762-3772 (2014).</li><li>Mosadegh, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrated+Elastomeric+Components+for+Autonomous+Regulation+of+Sequential+and+Oscillatory+Flow+Switching+in+Microfluidic+Devices.">Integrated Elastomeric Components for Autonomous Regulation of Sequential and Oscillatory Flow Switching in Microfluidic Devices.</a> Nature Physics. 6, 433-437 (2010).</li><li>Choi, S., Park, J. -. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tuneable+Hydrophoretic+Separation+Using+Elastic+Deformation+of+Poly(Dimethylsiloxane).">Tuneable Hydrophoretic Separation Using Elastic Deformation of Poly(Dimethylsiloxane).</a> Lab on a Chip. 9, 1962-1965 (2009).</li><li>Choi, S., Song, S., Choi, C., Park, J. -. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+Self-Sorting+of+Mammalian+Cells+to+Achieve+Cell+Cycle+Synchrony+by+Hydrophoresis.">Microfluidic Self-Sorting of Mammalian Cells to Achieve Cell Cycle Synchrony by Hydrophoresis.</a> Analytical Chemistry. 81, 1964-1968 (2009).</li><li>VanDelinder, V., Groisman, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Separation+of+Plasma+from+Whole+Human+Blood+in+a+Continuous+Cross-Flow+in+a+Molded+Microfluidic+Device.">Separation of Plasma from Whole Human Blood in a Continuous Cross-Flow in a Molded Microfluidic Device.</a> Analytical Chemistry. 78, 3765-3771 (2006).</li><li>VanDelinder, V., Groisman, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Perfusion+in+Microfluidic+Cross-Flow:+Separation+of+White+Blood+Cells+from+Whole+Blood+and+Exchange+of+Medium+in+a+Continuous+Flow.">Perfusion in Microfluidic Cross-Flow: Separation of White Blood Cells from Whole Blood and Exchange of Medium in a Continuous Flow.</a> Analytical Chemistry. 79, 2023-2030 (2007).</li><li>Duffy, D. C., McDonald, J. C., Schueller, O. J., Whitesides, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+Prototyping+of+Microfluidic+Systems+in+Poly(dimethylsiloxane).">Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane).</a> Analytical Chemistry. 70 (23), 4974-4984 (1998).</li><li>Xia, Y., Whitesides, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Soft+Lithography.">Soft Lithography.</a> Annual Review of Material Science. 28, 153-184 (1998).</li><li>Mello, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Plastic+Fantastic?.">Plastic Fantastic?.</a> Lab on a Chip. 2, 31N-36N (2002).</li><li>Choi, S., Park, J. -. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Two-step+Photolithography+to+Fabricate+Multilevel+Microchannels.">Two-step Photolithography to Fabricate Multilevel Microchannels.</a> Biomicrofluidics. 4, 046503 (2010).</li><li>Zhong, K., Gao, Y., Li, F., Zhang, Z., Luo, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+of+PDMS+Microlens+Array+by+Digital+Maskless+Grayscale+Lithography+and+Replica+Molding+Technique.">Fabrication of PDMS Microlens Array by Digital Maskless Grayscale Lithography and Replica Molding Technique.</a> Optik. 125, 2413-2416 (2013).</li><li>Brower, K., White, A. K., Fordyce, P. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multi-step+Variable+Height+Photolithography+for+Valved+Multilayer+Microfluidic+Devices.">Multi-step Variable Height Photolithography for Valved Multilayer Microfluidic Devices.</a> Journal of Visualized Experiments. (119), e55276 (2017).</li><li>Lai, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simple+Multi-level+Microchannel+Fabrication+by+Pseudo-grayscale+Backside+Diffused+Light+Lithography.">Simple Multi-level Microchannel Fabrication by Pseudo-grayscale Backside Diffused Light Lithography.</a> RSC Advances. 3, 19467-19473 (2013).</li><li>Huh, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reconstituting+Organ-Level+Lung+Functions+on+a+Chip.">Reconstituting Organ-Level Lung Functions on a Chip.</a> Science. 328, 1662-1668 (2010).</li><li>Deng, Y. -. L., Juang, Y. -. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polydimethyl+Siloxane+Wet+Etching+for+Three-Dimensional+Fabrication+of+Microneedle+Array+and+High-Aspect-Ratio+Micropillars.">Polydimethyl Siloxane Wet Etching for Three-Dimensional Fabrication of Microneedle Array and High-Aspect-Ratio Micropillars.</a> Biomicrofluidics. 8, 026502 (2014).</li><li>Tung, Y. -. C., Kurabayashi, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoimprinted+Strain-controlled+Elastomeric+Gratings+for+Optical+Wavelength+Tuning.">Nanoimprinted Strain-controlled Elastomeric Gratings for Optical Wavelength Tuning.</a> Applied Physics Letters. 86, 161113 (2005).</li><li>Tung, Y. -. C., Kurabayashi, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Single-Layer+PDMS-On-Silicon+Hybrid+Microactuator+with+Multi-Axis+Out-Of-Plane+Motion+Capabilities-Part+II:+Fabrication+and+Characterization.">A Single-Layer PDMS-On-Silicon Hybrid Microactuator with Multi-Axis Out-Of-Plane Motion Capabilities-Part II: Fabrication and Characterization.</a> Journal of Microelectromechanical Systems. 14, 558-566 (2005).</li><li>Chen, W., Lam, R. H. W., Fu, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photolithographic+Surface+Micromachining+of+Polydimethylsiloxane+(PDMS).">Photolithographic Surface Micromachining of Polydimethylsiloxane (PDMS).</a> Lab on a Chip. 12, 391-395 (2012).</li><li>Balakrisnan, B., Patil, S., Smela, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Patterning+PDMS+Using+a+Combination+of+Wet+and+Dry+Etching.">Patterning PDMS Using a Combination of Wet and Dry Etching.</a> Journal of Micromechanics and Microengineering. 19, 047002 (2009).</li><li>Takayama, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Topographical+Micropatterning+of+Poly(dimethylsiloxane)+Using+Laminar+Flows+of+Liquids+in+Capillaries.">Topographical Micropatterning of Poly(dimethylsiloxane) Using Laminar Flows of Liquids in Capillaries.</a> Advanced Materials. 13, 570-574 (2001).</li><li>Friend, J., Yeo, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+of+Microfluidic+Devices+Using+Polydimethylsiloxane.">Fabrication of Microfluidic Devices Using Polydimethylsiloxane.</a> Biomicrofluidics. 4, 026502 (2010).</li><li>. NANO SU-8 2000 Negative Tone Photoresist formulations 2002-2025 Available from: <a target="_blank" href="https://www.seas.upenn.edu/~nanosop/documents/SU8_2002-2025.pdf">https://www.seas.upenn.edu/~nanosop/documents/SU8_2002-2025.pdf</a> (2000)</li><li>. NANO SU-8 2000 Negative Tone Photoresist formulations 2035-2100 Available from: <a target="_blank" href="https://www.seas.upenn.edu/~nanosop/documents/SU8_2035-2100.pdf">https://www.seas.upenn.edu/~nanosop/documents/SU8_2035-2100.pdf</a> (2000)</li><li>Hardt, S., Sch&#246;nfeld, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Laminar+Mixing+in+Different+Interdigital+Micromixers:+II.+Numerical+Simulations.">Laminar Mixing in Different Interdigital Micromixers: II. Numerical Simulations.</a> AIChE Journal. 49, 578-584 (2003).</li><li>Hessel, V., L&#246;we, H., Sch&#246;nfeld, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micromixers-A+Review+on+Passive+and+Active+Mixing+Principles.">Micromixers-A Review on Passive and Active Mixing Principles.</a> Chemical Engineering Science. 60, 2479-2501 (2005).</li><li>Damiati, S., Kompella, U., Damiati, S., Kodzius, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+Devices+for+Drug+Delivery+Systems+and+Drug+Screening.">Microfluidic Devices for Drug Delivery Systems and Drug Screening.</a> Genes. 9, 103 (2018).</li><li>Wang, C. -. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Single+Step+Sequential+Polydimethylsiloxane+Wet+Etching+to+Fabricate+a+Microfluidic+Channel+with+Various+Cross-Sectional+Geometries.">Single Step Sequential Polydimethylsiloxane Wet Etching to Fabricate a Microfluidic Channel with Various Cross-Sectional Geometries.</a> Journal of Micromechanics and Microengineering. 27, 115003 (2017).</li></ol>

Over the past decades, microfluidics has offered promising means by which experimental platforms for chemical and biomedical research can be constructed systematically1,2,3,4,5. The platforms have also presented their capabilities of investigating several cellular functions in vivo under physiological microenvironment conditions via in vitro ...

Microfluidic techniques have drawn attention over the past decades because of their intrinsic advantages for a variety of biomedical and chemical research and applications. Several material usage options for constructing microfluidic chips are available nowadays, such as polymers, ceramics, and silicon materials. To the best of our knowledge, among the microfluidic materials, PDMS is the most common one due to its appropriate material properties for various microfluidics research and applications, including its optical and biological compatibilities with particles, fluids, and extremely small living organisms1,2,3,4,5. Furthermore, the surface chemical and structure mechanical properties of PDMS materials can be adjusted to facilitate microelectromechanical and mechanobiological studies by applying such polymer-based microfluidic devices10,11,12. Concerning the manufacturing of microfluidic devices with designed channel patterns, soft lithography replica molding methods are usually applied to create the microfluidic channels by utilizing their corresponding master molds which are composed of photolithography-patterned photoresist layers and silicon wafer substrates12. Owing to the nature of molding approaches using silicon wafers with patterned photoresist layers, the microfluidic channels commonly have regular cross sections of rectangular shapes with identical heights.
Recently, researchers have made significant progress in biomedical studies which deal with, for instance, sorting particles and cells using hydrophoresis, separating blood plasma, and enriching white blood cells by applying microfluidic chips with channels of different heights or geometric sections6,7,8,9. Such sorting and separating functions of microfluidics for biomedical applications are realized by customizing channels with different geometric sections. Several studies have been devoted to the manufacture of microfluidic channels with cross sections of different geometry features by fabricating master molds with specific surface patterns of various heights or non-rectangular cross sections. These studies on mold fabrication include such techniques as multi-step photolithography, photoresist reflow, and grey-scale lithography13,14,15. Inevitably, the existing techniques involve finely crafted photomasks or a precise alignment in multi-step manufacturing processes, which may substantially enhance the complexity levels of the corresponding fabrication of microfluidic channels. So far, several attempts have been made on single-step manufacturing processes for microfluidic channels of various sections, but the respective techniques are highly restricted to specific cross-sectional shapes of channels16.
Over the past two decades, in addition to the molding approaches for fabricating PDMS microfluidic channels with various sections, etching techniques for patterning PDMS channels with geometric features have become the fabrication of choice in a variety of microfluidic applications. For instance, PDMS wet etching is exploited along with multi-layer PDMS bonding for constructing a pneumatic actuated cell culture device of microfluidics with reconstituted organ-level lung functions17. The PDMS wet etching technique is employed together with PDMS casting on cylindrical microwells machined by computer-aided control systems for fabricating 3D PDMS microneedle arrays18. PDMS dry etching is used to make PDMS microstructures as parts of micro-electromechanical actuators19,20. Porous PDMS membranes with designed pore layouts are also fabricated through dry etching processes21. Both the wet and the dry etching techniques can be integrated into patterning PDMS films with designated geometric shapes22.
However, the etching techniques for forming PDMS channel structures with complex section shapes have not been commonly applied because of their intrinsic limitations on microfluidic fabrication. First, while the techniques of PDMS wet etching utilizing laminar flows of chemicals for creating microfluidic channels of various sections have been established, the subsequent channel section formation is still restricted because of the basic characteristics of isotropic chemical etching processes23. Furthermore, even though there seems to be reasonable space for controlling the channel section geometries in a microfluidics fabrication using the PDMS dry etching techniques20, the required etching time is usually too long (in terms of hours) to be practical for manufacturing microfluidic chips. In addition, the etching selectivity between PDMS materials and the corresponding masking photoresist layers might be low in general, and the resulted etched depths for the channels are, thus, not acceptable20.
In this paper, we develop a one-step approach to fabricate microfluidic channels of different geometric cross sections by PDMS sequential wet etching processes (hereafter referred to as SWEP). The SWEP begin with a PDMS microfluidic device with single-layer channels. With assorted layout designs of the channels, fabricating microfluidic channels with different geometric sections of various kinds can be achieved through sequential etching processes. The sequential etching only needs an etchant to be introduced into specific channels of the planned single-layer layouts embedded in PDMS materials. Compared to conventional PDMS fabrication processes, the SWEP just require one further step to fabricate microfluidic channels of non-rectangular sections or various heights. The proposed SWEP provide a straightforward and simple way of fabricating microfluidic channels with various sections along the flow direction, which can significantly simplify the processes in the aforementioned methods.

<table border="0" cellpadding="0" cellspacing="0" width="731">
	<tbody>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">1-Methyl-2-Pyrrolidinone</td>
			<td style="width:217px;">Tedia, Fairfield, OH</td>
			<td style="width:135px;">ME-1962</td>
			<td style="width:168px;">NMP</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">10 ml Syringe</td>
			<td style="width:217px;">Becton-Dickinson, Franklin Lakes, NJ</td>
			<td style="width:135px;">302151</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">150 mm Petri dish</td>
			<td style="width:217px;">Dogger Science</td>
			<td style="width:135px;">DP-43151</td>
			<td></td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:211px;">1H,1H,2H,2H- Perfluorooctyltrichlorosilane</td>
			<td style="width:217px;">Alfa Aesar, Ward Hill, MA</td>
			<td style="width:135px;">L16606</td>
			<td>97 % silane&#160;</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">4&#39;&#39; Silicon Dummy Wafer</td>
			<td style="width:217px;">Wollemi Technical, Taoyuan, Taiwan</td>
			<td style="width:135px;">-</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Acetone</td>
			<td style="width:217px;">ECHO Chemical, Miaoli, Taiwan</td>
			<td style="width:135px;">AH3102-000000-72EC</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:211px;">AG Double Expose Mask Aligner</td>
			<td style="width:217px;">M&#38;R Nano Technology, Taoyuan, Taiwan</td>
			<td style="width:135px;">AG500-4D-D-V-S-H</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:211px;">Biopsy Punch</td>
			<td style="width:217px;">Miltex, Plainsboro, NJ</td>
			<td style="width:135px;">33-31</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:211px;">Blunt Needle</td>
			<td style="width:217px;">Jensen Global, Santa Barbara, CA</td>
			<td style="width:135px;">Gauge 16</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Buffered Oxide Etch</td>
			<td style="width:217px;">ECHO Chemical, Miaoli, Taiwan</td>
			<td style="width:135px;">PH3101-000000-72EC</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Desicattor</td>
			<td style="width:217px;">A-VAC Industries, Anaheim, CA</td>
			<td style="width:135px;">35.10001.01</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Fluorescein Sodium Salt Water</td>
			<td style="width:217px;">Sigma-Aldrich Co., St Louis, MO</td>
			<td style="width:135px;">F6300</td>
			<td></td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:211px;">ImageJ</td>
			<td style="width:217px;">National Institutes of Health, Bethesda, MD</td>
			<td style="width:135px;">Ver. 1.51</td>
			<td>Imaging Processing Program&#160;</td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:211px;">Inverted Fluorescence Microscope&#160;</td>
			<td style="width:217px;">Leica Microsystems, Wetzlar, Germany</td>
			<td style="width:135px;">DMI 6000 B</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Isopropyl Alcohol (IPA)</td>
			<td style="width:217px;">ECHO Chemical, Miaoli, Taiwan</td>
			<td style="width:135px;">CMOS112-00000-72EC</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Leica Application Suite&#160;</td>
			<td style="width:217px;">Leica Microsystems GmbH</td>
			<td style="width:135px;">LAS X</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">MATLAB</td>
			<td style="width:217px;">MathWorks, Natick, MA</td>
			<td style="width:135px;">R2015b</td>
			<td>Programming for MR evaluation</td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:211px;">Mechanical Convention Oven</td>
			<td style="width:217px;">ThermoFisher Scientific,Waltham, MA</td>
			<td style="width:135px;">Lindberg Blue M MO1450C</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Plasma Tretment System</td>
			<td style="width:217px;">Nordson MARCH, Concord CA</td>
			<td style="width:135px;">PX-250</td>
			<td>Oxygen plasma surface treatment</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Polydimehtylsiloxane (PDMS)&#160;</td>
			<td style="width:217px;">Dow Corning, Midland, MI</td>
			<td style="width:135px;">SYLGARD 184</td>
			<td></td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:211px;">Polyethylene Tubing</td>
			<td style="width:217px;">Becton-Dickinson and Company, Sparks, MD</td>
			<td style="width:135px;">427446</td>
			<td>PE 205, 10&#39;</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Spin Coater</td>
			<td style="width:217px;">ELS Technology, Hsinchu, Taiwan</td>
			<td style="width:135px;">ELS 306MA</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Negative Tone Photoresist&#160;</td>
			<td style="width:217px;">MicroChem, Westborough, MA</td>
			<td style="width:135px;">SU-8 2050</td>
			<td></td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:211px;">Negative Tone Photoresist Developer</td>
			<td style="width:217px;">MicroChem, Westborough, MA</td>
			<td style="width:135px;">Y020100</td>
			<td style="width:168px;">SU-8 Developer</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Surgical Blade</td>
			<td style="width:217px;">Feather, Osaka, Japan</td>
			<td style="width:135px;">5005093</td>
			<td>PDMS cutting</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:211px;">Syringe Pump</td>
			<td style="width:217px;">Chemyx, Houston, TX</td>
			<td style="width:135px;">Fusion 400</td>
			<td></td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:211px;">Tetra-n-butylammonium Fluoride (TBAF)</td>
			<td style="width:217px;">Alfa Aesar, Ward Hill, MA</td>
			<td style="width:135px;">A10588</td>
			<td></td>
		</tr>
	</tbody>
</table>

one-step approach to fabricating polydimethylsiloxane microfluidic channels of different geometric sections by sequential wet etching processes

Polydimethylsiloxane (PDMS) materials are substantially exploited to fabricate microfluidic devices by using soft lithography replica molding techniques. Customized channel layout designs are necessary for specific functions and integrated performance of microfluidic devices in numerous biomedical and chemical applications (e.g., cell culture, biosensing, chemical synthesis, and liquid handling). Owing to the nature of molding approaches using silicon wafers with photoresist layers patterned by photolithography as master molds, the microfluidic channels commonly have regular cross sections of rectangular shapes with identical heights. Typically, channels with multiple heights or different geometric sections are designed to possess particular functions and to perform in various microfluidic applications (e.g., hydrophoresis is used for sorting particles and in continuous flows for separating blood cells6,7,8,9). Therefore, a great deal of effort has been made in constructing channels with various sections through multiple-step approaches like photolithography using several photoresist layers and assembly of different PDMS thin sheets. Nevertheless, such multiple-step approaches usually involve tedious procedures and extensive instrumentation. Furthermore, the fabricated devices may not perform consistently and the resulted experimental data may be unpredictable. Here, a one-step approach is developed for the straightforward fabrication of microfluidic channels with different geometric cross sections through PDMS sequential wet etching processes, that introduces etchant into channels of planned single-layer layouts embedded in PDMS materials. Compared to the existing methods for manufacturing PDMS microfluidic channels with different geometries, the developed one-step approach can significantly simplify the process to fabricate channels with non-rectangular sections or various heights. Consequently, the technique is a way of constructing complex microfluidic channels, which provides a fabrication solution for the advancement of innovative microfluidic systems.

Recently, a large number of studies have been made on the fabrication of microfluidic devices with channels of different sections by lithography replica molding13,14,15 and PDMS etching techniques17,18,19,20,21,<sup class="x...

Watch this Scientific Journal Video about One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes at JoVE.com

One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes

Several methods are available for the fabrication of channels of non-rectangular sections embedded in polydimethylsiloxane microfluidic devices. Most of them involve multistep manufacturing and extensive alignment. In this paper, a one-step approach is reported for fabricating microfluidic channels of different geometric cross sections by polydimethylsiloxane sequential wet etching.

Polydimethylsiloxane (PDMS) materials are substantially exploited to fabricate microfluidic devices by using soft lithography replica molding techniques. ...

Research

JoVE Journal

Engineering

Fabricating Metamaterials Using the Fiber Drawing Method

Metamaterials are man-made composite materials, fabricated by assembling components much smaller than the wavelength at which they operate 1. They owe ...

Simulation of the Planetary Interior Differentiation Processes in the Laboratory

A planetary interior is under high-pressure and high-temperature conditions and it has a layered structure. There are two important processes that led to ...

Knowledge Based Cloud FE Simulation of Sheet Metal Forming Processes

The use of Finite Element (FE) simulation software to adequately predict the outcome of sheet metal forming processes is crucial to enhancing the ...

Electrochemical Etching and Characterization of Sharp Field Emission Points for Electron Impact Ionization

A new variation of the drop-off method for fabricating field emission points by electrochemically etching tungsten rods in a NaOH solution is described. ...

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

During impregnation of a fibrous reinforcement in liquid composite molding (LCM) processes, capillary effects have to be understood in order to identify ...

Microfluidic Imaging Flow Cytometry by Asymmetric-detection Time-stretch Optical Microscopy (ATOM)

Microfluidic Imaging Flow Cytometry by Asymmetric-detection Time-stretch Optical Microscopy ATOM

Scaling the number of measurable parameters, which allows for multidimensional data analysis and thus higher-confidence statistical results, has been the ...

Nerve Stem Cell Differentiation by a One-step Cold Atmospheric Plasma Treatment In Vitro

Nerve Stem Cell Differentiation by a One-step Cold Atmospheric Plasma Treatment In Vitro

As the development of physical plasma technology, cold atmospheric plasmas (CAPs) have been widely investigated in decontamination, cancer treatment, ...

Drawing and Hydrophobicity-patterning Long Polydimethylsiloxane Silicone Filaments

Polydimethylsiloxane (PDMS) silicone is a versatile polymer that cannot readily be formed into long filaments. Traditional spinning methods fail because ...

Fabricating van der Waals Heterostructures with Precise Rotational Alignment

In this work we describe a technique for creating new crystals (van der Waals heterostructures) by stacking distinct ultrathin layered 2D materials. We ...

Aesthetically Enhanced Silica Aerogel Via Incorporation of Laser Etching and Dyes

A procedure for aesthetically enhancing silica aerogel monoliths by laser etching and incorporation of dyes is described in this manuscript. Using a rapid ...