Name: accurate determination of the equilibrium surface tension values with area perturbation tests
Uploaded: 2019-08-30T14:00:00
Description: Watch this Scientific Journal Video about Accurate Determination of the Equilibrium Surface Tension Values with Area Perturbation Tests at JoVE.com

The authors are grateful to the Pioneer Oil Company (Vincennes, IN) for financial support.

1. Minimum instrument specifications
<ol>
	<li>Prepare a tensiometer for the EBM with the following specifications: (i) a dispensing system for controlling the dispensing gas volume; (ii) a camera for capturing the bubble image; (iii) an image analysis software for solving the Laplace-Young equation (LY equation) with the axisymmetric bubble shape analysis algorithm11,12; and (iv) a temperature-controlled sample chamber. 
	NOTE: Usually, the instrument for...

<ol>
	<li>Shah, D. O., Schechter, R. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Improved oil recovery by surfactant and polymer flooding. , (1977).</li><li>Hiemenz, P. C., Rajagopalan, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Principles of Colloid and Surface Chemistry. , (1997).</li><li>Adamson, S. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Physical Chemistry of Surfaces. , (1990).</li><li>Doe, P. H., El-Emary, M., Wade, W. H., Schechter, R. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surfactants+for+producing+low+interfacial+tensions:+II.+Linear+alkylbenzenesulfonates+with+additional+alkyl+substituents.">Surfactants for producing low interfacial tensions: II. Linear alkylbenzenesulfonates with additional alkyl substituents.</a> Journal of the American Oil Chemists' Society. 55 (5), 505-512 (1978).</li><li>Chung, J., Boudouris, B. W., Franses, E. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surface+Tension+Behavior+of+Aqueous+Solutions+of+a+Propoxylated+Surfactant+and+Interfacial+Tension+Behavior+against+a+Crude+Oil.">Surface Tension Behavior of Aqueous Solutions of a Propoxylated Surfactant and Interfacial Tension Behavior against a Crude Oil.</a> Colloids and Surfaces A: Physicochemical and Engineering Aspects. 537, 163-172 (2018).</li><li>Miller, R., Lunkenheimer, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+the+determination+of+equilibrium+surface+tension+values+of+surfactant+solutions.">On the determination of equilibrium surface tension values of surfactant solutions.</a> Colloid &amp; Polymer Science. 261 (7), 585-590 (1983).</li><li>Miller, R., Lunkenheimer, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adsorption+kinetics+measurements+of+some+nonionic+surfactants.">Adsorption kinetics measurements of some nonionic surfactants.</a> Colloid &amp; Polymer Science. 264 (4), 357-361 (1986).</li><li>Lunkenheimer, K., Miller, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Properties+of+homologous+series+of+surface-chemically+pure+surfactants+at+the+water-air+interface+Part+I:+Equilibrium+properties.">Properties of homologous series of surface-chemically pure surfactants at the water-air interface Part I: Equilibrium properties.</a> Abhandlungen der Akademie der Wissenschaften der DDR, abteilung Mathematik, Naturwissenschaften, Technik. (1), 113 (1986).</li><li>Franses, E. I., Basaran, O. A., Chang, C. -. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Techniques+to+measure+dynamic+surface+tension.">Techniques to measure dynamic surface tension.</a> Current Opinion in Colloid &amp; Interface Science. 1 (2), 296-303 (1996).</li><li>Hua, X. Y., Rosen, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamic+surface+tension+of+aqueous+surfactant+solutions+1.+basic+parameters.">Dynamic surface tension of aqueous surfactant solutions 1. basic parameters.</a> Journal of Colloid and Interface Science. 124 (2), 652-659 (1988).</li><li>Rotenberg, Y., Boruvka, L., Neumann, A. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Determination+of+surface+tension+and+contact+angle+from+the+shapes+of+axisymmetric+fluid+interfaces.">Determination of surface tension and contact angle from the shapes of axisymmetric fluid interfaces.</a> Journal of Colloid And Interface Science. 93 (1), 169-183 (1983).</li><li>Boyce, J. F., Schurch, S., Rotenberg, Y., Neumann, A. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Measurement+of+Surface+and+Interfacial+Tension+by+the+Axisymmetric+Drop+Technique.">The Measurement of Surface and Interfacial Tension by the Axisymmetric Drop Technique.</a> Colloids and Surfaces. 9, 307-317 (1984).</li><li>Vonnegut, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rotating+bubble+method+for+the+determination+of+surface+and+interfacial+tensions.">Rotating bubble method for the determination of surface and interfacial tensions.</a> Review of Scientific Instruments. 13 (1), 6-9 (1942).</li><li>Lin, S. -. Y., Mckeigue, K., Maldarelli, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diffusion-controlled+Surfactant+Adsorption+Studied+by+Pendant+Drop+Digitization.">Diffusion-controlled Surfactant Adsorption Studied by Pendant Drop Digitization.</a> AIChE Journal. 36 (12), 1785-1795 (1990).</li><li>Sheng, J. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modern+chemical+enhanced+oil+recovery:+theory+and+practice.">Modern chemical enhanced oil recovery: theory and practice.</a> Gulf Professional Publishing. , (2010).</li><li>Moody, C. A., Field, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Perfluorinated+surfactants+and+the+environmental+implications+of+their+use+in+fire-fighting+foams.">Perfluorinated surfactants and the environmental implications of their use in fire-fighting foams.</a> Environmental Science and Technology. 34 (18), 3864-3870 (2000).</li></ol>

The EBM and the SBM are simple and robust methods for determining tension values for air/water or oil/water interfaces at atmospheric pressure. Prerequisite information for these methods is the density of each phase, and no contact angle information is required for determining tension values9. A major limitation of the techniques is that the samples should have a low viscosity, and be single-phase or below the surfactant solubility. The two protocols, the EBM and the SBM, are used for measuring DS...

The determination of the equilibrium surface tension (EST), or the equilibrium interfacial tension (EIFT), of a given air/water or oil/water interface is a critical step for applications in a wide range of industrial areas such as detergency, enhanced oil recovery, consumer products, and pharmaceutics1,2,3,4. Such tension values should be determined indirectly from the dynamic surface tension (DST) or the dynamic interfacial tension (DIFT), because only dynamic tension values are directly measurable. Dynamic surface tension values (i.e., measuring tension values as a function of time) are determined at regular time intervals. Equilibrium tension values are deemed to be determined when the DST values are at steady state. True equilibrium surface tension values are better established when they are stable against perturbations5. Several observations of the tension relaxation after surface area compression have been previously reported by Miller and Lunkenheimer, who used &#160;two classical tensiometry methods, the Du No&#252;y ring and the &#160;Wilhelmy plate methods6,7,8. Those methods are less accurate than the ones used in this study, and those DSTs were measured every few minutes. Numerous techniques have been developed for measuring the surface tension (ST) or interfacial tension (IFT) values of interfaces, but there are only a handful of techniques that can be used to measure DST or DIFT values and allow one to apply perturbations to test the stability of the acquired steady-state tension values9. If the aqueous solution contains surfactant mixtures, and when one of the components adsorbs much faster than the others, then there may be a temporary plateau in the DST curves10. Then the presented methods may not work well in the short time-scales as for one component surfactants, but they still may work if the procedures are extended slightly to cover longer time-scales.
The protocols described here show representative data only for surface tension values of an air/aqueous solution. However, these protocols also apply for the IFT of an aqueous solution against a second liquid, such as an oil, which is immiscible with the aqueous solution and has a smaller density than that of the aqueous solution. Here, we present two robust methods that satisfy these criteria, the emerging bubble method (EBM) and the spinning bubble method (SBM). In both methods, one determines ST values that are based on bubble shapes and do not require contact angle information, which can introduce significant uncertainties and errors to the measurements. For the EBM, area perturbations are introduced by abruptly changing the volume of the bubble emerging from a syringe needle tip. For the SBM, changes in the rotation frequency of the samples are used for area perturbations. The detailed protocols are aimed to guide researchers in the field, such that they can avoid common mistakes or errors in dynamic and equilibrium tensiometry and help prevent inaccurate interpretations of the acquired data.

<table border="0" cellpadding="0" cellspacing="0" style="width:1303px;" width="1303">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:623px;">10 &#181;L, Model 1701 SN SYR, Cemented NDL, Custom gauge, length, point style</td>
			<td style="width:227px;">Hamilton</td>
			<td style="width:119px;">80008</td>
			<td style="width:335px;">gauge: 26s, needle length: 2.5 inch, point style: 2</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:623px;">Anton Paar Density Meter</td>
			<td style="width:227px;">Anton Paar</td>
			<td style="width:119px;">DMA 5000</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:623px;">Barnstead MicroPure Water Purification System</td>
			<td style="width:227px;">Thermo Fisher Scientific</td>
			<td style="width:119px;">50132374</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:623px;">Emerging bubble tensiometer</td>
			<td style="width:227px;">Ram&#233;-Hart Instrument Company</td>
			<td style="width:119px;">Model 790</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:623px;">Spinning bubble tensiometer</td>
			<td style="width:227px;">DataPhysics Instruments</td>
			<td style="width:119px;">SVT 20</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:623px;">Triton X-100</td>
			<td style="width:227px;">Sigma-Aldrich</td>
			<td style="width:119px;">X100</td>
			<td></td>
		</tr>
	</tbody>
</table>

accurate determination of the equilibrium surface tension values with area perturbation tests

We demonstrate two robust protocols for determining the equilibrium surface tension (EST) values with area perturbation tests. The EST values should be indirectly determined from the dynamic surface tension (DST) values when surface tension (ST) values are at steady-state and stable against perturbations. The emerging bubble method (EBM) and the spinning bubble method (SBM) were chosen, because, with these methods, it is simple to introduce area perturbations while continuing dynamic tension measurements. Abrupt expansion or compression of an air bubble was used as a source of area perturbation for the EBM. For the SBM, changes in the rotation frequency of the sample solution were used to produce area perturbations. A Triton X-100 aqueous solution of a fixed concentration above its critical micelle concentration (CMC) was used as a model surfactant solution. The determined EST value of the model air/water interface from the EBM was 31.5 &#177; 0.1 mN&#183;m-1 and that from the SBM was 30.8 &#177; 0.2 mN&#183;m-1. The two protocols described in the article provide robust criteria for establishing the EST values.

Dynamic surface tension and equilibrium surface tension of an aqueous Triton X-100 solution with the EBM 
The SST values of the Triton X-100 solutions against air were measured, and their stability was tested for 5 mM aqueous solution; the CMC for this surfactant in water is 0.23 mM14. The SST1, 31.5 &#177; 0.1 mN&#183;m-1, was obtained approximately 20 s after the bubble was formed (Figure 3). After about 25 s, the surface ...

Watch this Scientific Journal Video about Accurate Determination of the Equilibrium Surface Tension Values with Area Perturbation Tests at JoVE.com

Accurate Determination of the Equilibrium Surface Tension Values with Area Perturbation Tests

Two protocols for determining the equilibrium surface tension (EST) values using the emerging bubble method (EBM) and the spinning bubble method (SBM) are presented for a surfactant-containing aqueous phase against air.

We demonstrate two robust protocols for determining the equilibrium surface tension (EST) values with area perturbation tests. The EST values should be ...

Research

Education

JoVE Core

JoVE Journal

Mechanical Engineering

Engineering

Unit 1

Equilibrium of a Particle

SCIENTISTS IN ACTION

Taking Advantage of Reduced Droplet-surface Interaction to Optimize Transport of Bioanalytes in Digital Microfluidics

Digital microfluidics (DMF), a technique for manipulation of droplets, is a promising alternative for the development of &#8220;lab-on-a-chip&#8221; ...

Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment

The wettability of silicon (Si) is one of the important parameters in the technology of surface functionalization of this material and fabrication of ...

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis

Nuclear reaction analysis (NRA) via the resonant 1H(15N,&#945;&#947;)12C reaction is a highly effective method of depth profiling that quantitatively and ...

The Measurement of Unsteady Surface Pressure Using a Remote Microphone Probe

Microphones are widely applied to measure pressure fluctuations at the walls of solid bodies immersed in turbulent flows. Turbulent motions with various ...

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron

Ablative Thermal Protection Systems (TPS) allowed the first humans to safely return to Earth from the moon and are still considered as the only solution ...

Strain Sensing Based on Multiscale Composite Materials Reinforced with Graphene Nanoplatelets

The electrical response of NH2-functionalized graphene nanoplatelets composite materials under strain was studied. Two different manufacturing methods are ...

Determination of the Excitation and Coupling Rates Between Light Emitters and Surface Plasmon Polaritons

We have developed a unique method to measure the excitation and coupling rates between the light emitters and surface plasmon polaritons (SPPs) arising ...

Ultrasonic Fatigue Testing in the Tension-Compression Mode

Ultrasonic fatigue testing is one of a few methods which allow investigating fatigue properties in the ultra-high cycle region. The method is based on ...

Microparticle Manipulation by Standing Surface Acoustic Waves with Dual-frequency Excitations

We demonstrate a method for increasing the tuning ability of a standing surface acoustic wave (SSAW) for microparticles manipulation in a lab-on-a-chip ...

Label-Free Imaging of Single Proteins Secreted from Living Cells via iSCAT Microscopy

We demonstrate interferometric scattering (iSCAT) microscopy, a method capable of detecting single unlabeled proteins secreted from individual living ...