<p class='jove_content'>This work was supported by the National Institute on Alcohol Abuse and Alcoholism (RO1 AA014925 awarded to Dr. Patricia H. Janak at University of California, San Francisco, CA, USA), Fonds de recherche du Quebec &#8211; Sant&#233; (NC) and the Natural Sciences and Engineering Research Council (NC, 387224-2010). The open-access publication of this article was made possible by sponsorship from Med Associates Inc. </p>

<p class="jove_content">所有的程序都是由动物研究伦理委员会在Concordia大学批准，同意从加拿大委员会动物保护的建议。 </p><p class="jove_title"> 1，动物</p><ol><li>获得男Long-Evans大鼠（220  -  240 G于到货）。 </li><li>维持大鼠的温度（21℃）和湿度（44％）控制的动物护理设施，在12小时明暗周期与灯在上午7:00。 </li><li>对内部大鼠的到来。 3天后，房子只在个别塑料鞋盒笼中的β-片床上用品，尼龙骨，并免费获得标准大鼠饲料和水。使用具有双护圈，以允许第二瓶的随后放置，除了水瓶笼盖。注:大鼠可被单独饲养，尽快为他们在动物护理设施的到来。 </li><li>开始每天处理大鼠。注:作为指南，装卸一星期通常足以将它们适应新环境是圆周率cked向上和由实验者处理。 </li></ol><p class="jove_title">在笼2间歇乙醇访问</p><p class="jove_content">注:在家里笼子行为间歇乙醇访问，以确保只将之前实验中的行为训练阶段开始喝<sup>17-19</sup>生理相关的量的乙醇。在光相位发起该过程，虽然它可以在任何时间的光或暗循环期间被启动。 </p><ol><li>准备两瓶每只大鼠。 <ol><li>用100毫升的塑料量筒作为乙醇瓶和473毫升标准的塑料水瓶。使用相对小容量的乙醇瓶中，填充几乎到最大体积容量，以减少乙醇损失由于泄漏和蒸发。 </li><li>补一瓶，用15％乙醇，通过在自来水中稀释的95％乙醇制成。注:其他的乙醇浓度，例如10％或20％，也可以代替15％乙醇中的使用。 </li><li>网络连接就会在第二瓶用自来水。 </li><li>将橡皮塞，用含有滚珠轴承以减少泄漏，在每个瓶吸管。 </li></ol></li><li>设置了两个控制箱，相同处理，家里的笼子与对照笼子不包含老鼠或被褥例外。 <ol><li> 2.1.4  - 按照步骤2.1.1规定的准备乙醇和水的瓶子的控制箱。 </li><li>使用从控制网箱得到控制的溢出和/或蒸发，可能会发生在乙醇访问会话的过程中（如在步骤2.8.1中描述 -  2.8.2）的措施。 </li></ol></li><li>称量所有的乙醇和水的瓶子。记录所有的权重。 </li><li>权衡所有的老鼠。记录所有的权重。 </li><li>将酒精瓶和矿泉水瓶上的每一个笼子，并在同一时间控制箱。留在笼子里24小时两个瓶子。 </li><li>在24小时期间结束时，取出两个瓶子从笼在同一时间。 </li><li>称量所有的乙醇和水的瓶子。记录所有的权重。 </li><li>以确定在24小时期间多少乙醇和水被消耗，减去每个瓶子的重量它被从瓶的重量的家笼中取出时，当它被放置在笼中24小时，早于每只大鼠。 <ol><li>做相同的两个控制箱，然后计算每个流体泄漏的平均金额。 </li><li>减去乙醇和水的溢出，分别的平均量，从相应的乙醇和水的消耗的措施为每只鼠。 </li><li>使用这些泄漏控制措施的差异来计算乙醇的消费量克/公斤，水耗和乙醇偏好。 </li></ol></li><li>要计算乙醇消耗率（g / kg）的，首先基于整体解决方案（乙醇+水成分）的浓度转化的乙醇溶液消耗的投入量（毫升）的重量（克），根据于式容积（毫升）=重量（g）/密度（g / ml）的。注意:溶液的密度将随着乙醇浓度的函数。 <ol><li>接着，乘以由乙醇缩放为所使用的特定百分比的溶液的密度（克/毫升）所消耗的乙醇溶液的体积（毫升），得到的乙醇消耗的重量（克）。 </li><li>鸿沟乙醇大鼠体重（千克）消耗，获得克/千克措施乙醇消耗的重量（克）。 </li></ol></li><li>计算乙醇偏好，表达乙醇摄入量（毫升），为总的流体（乙醇+水，毫升）摄取的百分比。 </li><li>返回水瓶只回老鼠的笼子。在接下来的24小时，给大鼠使用水而不是乙醇。相反，乙醇瓶，将预先称重第二水瓶上笼。 </li><li>在24小时周期结束，同时删除这两个矿泉水瓶从笼子里。 </li><li>称取两组水瓶。记录所有伟亮灯。 </li><li>减去每个瓶子的重量，它被从瓶的重量的家笼中取出时，当它被放置在24小时较早的家笼中，减去在步骤2.8.1中描述的控制的笼子中得到的平均泄漏的措施 - 2.8.2。 </li><li>使用这些溢出控制差的措施，计算水的消耗。 </li><li>重新开始循环，提供乙醇和水的瓶子给大鼠，通过2.14的步骤2.1所述。 <ol><li>重复此循环多次（约12）会诱发高且稳定水平的乙醇消费。参见<strong>图1</strong>乙醇消费量在笼子代表性的结果（克/千克）。 </li><li>替代的乙醇和水在瓶笼盖整个会话的空间位置，以防止侧偏好的发展。 </li><li>作出新的乙醇溶液每周一次，以确保在准确和稳定的乙醇浓度会话。最小化的乙醇蒸发超过的时间用这种方法长时间的影响。 </li></ol></li></ol><p class="jove_title"> 3，仪器</p><ol><li>房子的每个空调室通风，声音衰减柜内。 </li><li>构造一个不锈钢金属棒地板的每个调节室，透明聚碳酸酯天花板，透明的聚碳酸酯后壁和前门，和铝金属板的侧壁。 <ol><li>安装液口中央的正确金属侧壁的基地附近。装备的入口流体端口与一个红外线光电管来检测条目插入端口。 </li><li>从流体口的回20毫升注射器含有乙醇使用钝头的针连接聚乙烯管。将注射器插入注射器泵位于声音衰减隔间之外。对于巴甫洛夫歧视的培训课程，乙醇加载到注射器将其放置到前级泵。总理管bŸ手动推进泵，然后擦去多余的乙醇液口。 </li><li>在左侧的侧壁，中心安装一个白色houselight室的天花板附近。 </li><li>安装唱首歌（2 Hz的周期）和左侧壁的左上角配有音箱白噪声发生器。 </li></ol></li><li>装备各空调室中的视觉，嗅觉和触觉刺激特定的配置来创建一个独特的环境。 <ol><li>使用两种不同的情况下，指定的上下文1和语境（2）配置的调节室内的背景1，另一半作为上下文2的一半。 </li><li>创建背景1，将黑纸板板在天花板和前面和后面的腔室的壁，喷雾柠檬气味（10％体积/体积，在自来水中制成稀释柠檬油）放入培养皿中，并将其放置在中心下室的地板上的金属废料托盘，并插入一个透明的聚碳酸酯底板上的金属ŘOD楼。行废盘用吸水纸巾或工作台衬垫。 </li><li>要创建上下文2，离​​开破获室的天花板，前面和后面的墙壁，让他们都清楚，喷雾杏仁味（10％V / V，通过稀释苯甲醛在自来水制造）到培养皿中，并把它集中下室的地板上的金属废料盘，并插入一个穿孔的金属底板上的金属棒地板。行废盘用吸水纸巾或工作台衬垫。 </li></ol></li></ol><p class="jove_title"> 4，习惯化</p><p class="jove_content">大鼠，观察者的行为训练室和各内调节室内的两个上下文中。对于实验中的这个阶段，不要加载乙醇进入20毫升注射器。 </p><ol><li>大鼠，观察者对从动物护理设施被运送到实验室的行为训练室的两个短会习惯的过程。 <ol><li>在第一个环节，加载大鼠经口Ñ​​他们家的笼子上的动物护理设施的轮式车，并运送到实验室的行为训练室。照亮了房间的灯，打开风扇在每一个消音柜，退出了房间，关上门，让大鼠适应20分钟，这个新的环境，而留在手推车上他们家的笼子。在这个20分钟的时间内结束，则返回该大鼠的动物护理设施。 </li><li>在第二次会议，使大鼠在实验室行为训练室。和以前一样，离开灯和开关柜球迷在房间里。留在房间里，关着门，以尽量减少干扰，并处理和称重每只大鼠的行为训练室。记录的权重，然后返回大鼠的动物护理设施。 </li></ol></li><li>大鼠，观察者对空调室中的两个短习惯会。 <ol><li>运输大鼠的行为训练室，记录各组大鼠的体重，并加载每只大鼠成其指定的调理室。 </li><li>在第一个习惯会话建立的一半室作为背景1，其余为背景2。 </li><li>在第二届习惯设置每个室与未在以前的会话中使用的上下文。 </li><li>进行了平衡的方式习惯化会话，大鼠，使得一半被第一次接触到上下文1，其次是背景信息2，而另一半是第一次接触到上下文2，其次是背景1。理想情况下，进行了两个习惯会话同一天，虽然可以跨越两天内传播，如果有必要的。 </li><li>对于习惯会话，使用计算机程序来照亮houselight 1分钟的节目已经发出了。录制20分钟会议期间提出的流体端口条目的总数。在会议结束时，编程houselight关闭。在习惯会不会带来任何乙醇或线索。 </li></ol></lI&gt; <li>从室中取出老鼠，他们回到自己的家笼，运回来的动物护理设施。 </li><li>清洁设备（ <em>如</em>地板，废盘，培养皿）。详情参见步骤5.7。 </li></ol><p class="jove_title"> 5巴甫洛夫歧视训练（PDT） </p><p class="jove_content">列车大鼠行为上是成对的，用乙醇和第二听觉线索是不是一听觉线索区分。在实验的这一阶段，填充20毫升注射器，用15％的乙醇。 </p><ol><li>装备各空调室中的视觉，嗅觉特定的配置，和触觉的刺激来创造一个独特的环境，如步骤3.3.2和3.3.3中所述<ol><li>分配一半的大鼠语境1，而另一半的语境2在平衡重时尚，基于乙醇的消费偏好和整个家笼乙醇接入过程的最后两节的平均值。请参阅续PDT过程中使用分机的背景A.注意:每只大鼠只遇到一个情况下在这一阶段的训练。 </li><li>确保嗅觉刺激是最后的情景刺激被添加到每个空调室中。关闭室和声音衰减开关柜的门包含嗅觉的刺激，并尽量减少不同气味的comingling。 </li></ol></li><li>把老鼠变成了行为训练室，记录各组大鼠的体重，并加载每只大鼠成其指定的调理室。 </li><li>启动控制事件的每一个PDT会议期间按下列顺序的计算机程序。 <ol><li>在节目后，5分钟已经发出，照亮houselight。 </li><li>目前，白噪声刺激和发声刺激各16次。指定这些听觉的刺激之一，是CS +，另一个是CS-，跨越两个上下文中的一个平衡的方式。 </li><li>让每个CS +和CS-审判升AST 10秒。 </li><li>提供0.2毫升乙醇进液口的最后6秒的CS +的过程中。在CS-期间不提供任何酒精。 </li><li>使每个PDT会话平均最后58分钟。目前CS +和CS  - 每一个变量的时间67秒时间表。 </li><li>在10秒的连拍间隔期间记录流体端口的条目（在CS上介绍的10秒），在10秒的预CS间隔（10秒前立即CS发病），以及10秒后的连拍间隔（10秒，立即以下CS偏移）为CS +和CS-展示，以及在整个会话的总流体端口条目。也记录在这些间隔期间作出各端口输入的持续时间。 </li><li>在会议结束时，关闭houselight关闭。 </li></ol></li><li>从室中取出老鼠，他们回到自己的家笼，运回来的动物护理设施。 </li><li>检查流体端口，以确保只消耗3.2毫升乙醇中的每个PDTŠ交付分裂国家。 </li><li>冲洗乙醇出聚乙烯管材的使用60毫升注射器中含有少量的水。然后，通过60毫升空气通过管道使用第二，空的注射器，以确保它是干的。 </li><li>清洁设备。对于日常​​保洁，洗地板，废盘和培养皿。每周一次，清洗整个空调室。不要使用有香味的清洁产品，避免产生不希望的气味进入实验装置。 </li><li>继续PDT日常会话，直到老鼠表现出他们的口进入反应到CS +与CS  - 稳定的歧视。请注意:响应于所述CS +取得端口条目应该增加了会话，而在响应向CS-端口条目应保持低电平。为了实现歧视PDT会话所需的确切数字调节反应可能会有所不同，但是，作为一个指南，计划在约20次。 </li></ol><p class="jove_title"> 6灭绝</p><ol><li>装备各空调湛BER与视觉，嗅觉和触觉的刺激来创造一个环境，它是从1时PDT会议大鼠经历截然不同。例如，如果上下文1在PDT中使用，配置室作为背景2灭绝会议。请参阅灭绝的语境B.过程中使用的情况下</li><li>进行灭绝会以相同的PDT会话，但在CS +中不提供任何酒精。 <ol><li>使用PDT过程中用于呈现在CS +和CS-，相同的计算机程序。 </li><li>保持整个实验的相一致，装入一个空的注射器放入注射器泵，并离开泵接通。确保灭绝会议之前的聚乙烯管材不含乙醇。 </li></ol></li><li>每天不断灭绝的会议，直到老鼠不再显示歧视的CS +和CS-之间的响应。注:响应CS +做端口参赛作品必须跨越灭绝会逐步下降，直到有各色无响应向CS +端口条目和端口项中响应于所述CS-制成之间NCE。会议灭绝的确切数字要消灭空调的回应可能会有所不同，但作为一个指南，计划在大约8次。 </li><li>清洁设备在每届会议结束时，按照步骤5.7所述。 </li></ol><p class="jove_title"> 7语境诱发更新测试</p><ol><li>装备各空调室与视觉，嗅觉和触觉的刺激来创造是在PDT会议所经历的背景。例如，如果一个给定的大鼠经历语境1 PDT会话，配置了室内的语境1的测试环节。请参考更新测试的语境答过程中使用的情况下</li><li>进行上下文诱导重建测试完全相同于PDT会话，但重建试验期间不发送任何乙醇。目前<br /> CS +和CS  - 作为PDT在会议之前，但隐瞒了乙醇。 <ol><li>使用同一台计算机PRogram PDT过程中用于呈现在CS +和CS-的。 </li><li>保持整个相一致，装入一个空的注射器插入注射器泵，并离开泵接通。确保测试环节之前，聚乙烯管材不含有乙醇。 </li></ol></li><li>观察巴甫洛夫空调酒精寻求行为方面引起的更新。注意:此更新效果将是明显通过在响应于所述CS +取得端口条目的数量选择性的增加，与在响应于所述CS-，相对于CS +和CS-制成端口条目行为没有变化响应的观察消退训练结束。 </li><li>清洁设备在会议结束时，按照步骤5.7所述。 </li></ol>

<ol>
	<li>Field, M., Duka, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cues+paired+with+a+low+dose+of+alcohol+acquire+conditioned+incentive+properties+in+social+drinkers.">Cues paired with a low dose of alcohol acquire conditioned incentive properties in social drinkers.</a> <em style='font-style: italic'>Psychopharmacology (Berl)</em>. <b>159</b>, 325-334 (2002).</li><li>Litt, M. D., Cooney, N. L., Morse, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reactivity+to+alcohol-related+stimuli+in+the+laboratory+and+in+the+field:+predictors+of+craving+in+treated+alcoholics).">Reactivity to alcohol-related stimuli in the laboratory and in the field: predictors of craving in treated alcoholics).</a> <em style='font-style: italic'>Addiction</em>. <b>95</b>, 889-900 (2000).</li><li>Pomerleau, O. F., Fertig, J., Baker, L., Cooney, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reactivity+to+alcohol+cues+in+alcoholics+and+non-alcoholics:+implications+for+a+stimulus+control+analysis+of+drinking.">Reactivity to alcohol cues in alcoholics and non-alcoholics: implications for a stimulus control analysis of drinking.</a> <em style='font-style: italic'>Addict Behav</em>. <b>8</b>, 1-10 (1983).</li><li>Sinha, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+findings+on+biological+factors+predicting+addiction+relapse+vulnerability.">New findings on biological factors predicting addiction relapse vulnerability.</a> <em style='font-style: italic'>Curr Psychiatry Rep</em>. <b>13</b>, 398-405 (2011).</li><li>Conklin, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Environments+as+cues+to+smoke:+implications+for+human+extinction-based+research+and+treatment.">Environments as cues to smoke: implications for human extinction-based research and treatment.</a> <em style='font-style: italic'>Exp Clin Psychopharmacol</em>. <b>14</b>, 12-19 (2006).</li><li>Conklin, C. A., Robin, N., Perkins, K. A., Salkeld, R. P., McClernon, F. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Proximal+versus+distal+cues+to+smoke:+the+effects+of+environments+on+smokers'+cue-reactivity.">Proximal versus distal cues to smoke: the effects of environments on smokers' cue-reactivity.</a> <em style='font-style: italic'>Exp Clin Psychopharmacol</em>. <b>16</b>, 207-214 (2008).</li><li>Janak, P. H., Chaudhri, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+potent+effect+of+environmental+context+on+relapse+to+alcohol-seeking+after+extinction.">The potent effect of environmental context on relapse to alcohol-seeking after extinction.</a> <em style='font-style: italic'>Open Addict J</em>. <b>3</b>, 76-87 (2010).</li><li>Chaudhri, N., Sahuque, L. L., Cone, J. J., Janak, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reinstated+ethanol-seeking+in+rats+is+modulated+by+environmental+context+and+requires+the+nucleus+accumbens+core.">Reinstated ethanol-seeking in rats is modulated by environmental context and requires the nucleus accumbens core.</a> <em style='font-style: italic'>Eur J Neurosci</em>. <b>28</b>, 2288-2298 (2008).</li><li>Chaudhri, N., Sahuque, L. L., Janak, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Context-induced+relapse+of+conditioned+behavioral+responding+to+ethanol+cues+in+rats.">Context-induced relapse of conditioned behavioral responding to ethanol cues in rats.</a> <em style='font-style: italic'>Biol Psychiatry</em>. <b>64</b>, 203-210 (2008).</li><li>Crombag, H. S., Shaham, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Renewal+of+drug+seeking+by+contextual+cues+after+prolonged+extinction+in+rats.">Renewal of drug seeking by contextual cues after prolonged extinction in rats.</a> <em style='font-style: italic'>Behav Neurosci</em>. <b>116</b>, 169-173 (2002).</li><li>Fuchs, R. A., Eaddy, J. L., Su, Z. I., Bell, G. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Interactions+of+the+basolateral+amygdala+with+the+dorsal+hippocampus+and+dorsomedial+prefrontal+cortex+regulate+drug+context-induced+reinstatement+of+cocaine-seeking+in+rats.">Interactions of the basolateral amygdala with the dorsal hippocampus and dorsomedial prefrontal cortex regulate drug context-induced reinstatement of cocaine-seeking in rats.</a> <em style='font-style: italic'>Eur J Neurosci</em>. <b>26</b>, 487-498 (2007).</li><li>Marchant, N. J., Hamlin, A. S., McNally, G. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Lateral+hypothalamus+is+required+for+context-induced+reinstatement+of+extinguished+reward+seeking.">Lateral hypothalamus is required for context-induced reinstatement of extinguished reward seeking.</a> <em style='font-style: italic'>J Neurosci</em>. <b>29</b>, 1331-1342 (2009).</li><li>Zironi, I., Burattini, C., Aicardi, G., Janak, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Context+is+a+trigger+for+relapse+to+alcohol.">Context is a trigger for relapse to alcohol.</a> <em style='font-style: italic'>Behav Brain Res</em>. <b>167</b>, 150-155 (2006).</li><li>Sciascia, J. M., Mendoza, J., Chaudhri, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Blocking+dopamine+D1-like+receptors+attenuates+context-induced+renewal+of+Pavlovian-conditioned+alcohol-seeking+in+rats.">Blocking dopamine D1-like receptors attenuates context-induced renewal of Pavlovian-conditioned alcohol-seeking in rats.</a> <em style='font-style: italic'>Alcohol Clin Exp Res</em>. <b>38</b>, 418-427 (2014).</li><li>Chaudhri, N., Woods, C. A., Sahuque, L. L., Gill, T. M., Janak, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Unilateral+inactivation+of+the+basolateral+amygdala+attenuates+context-induced+renewal+of+Pavlovian-conditioned+alcohol-seeking.">Unilateral inactivation of the basolateral amygdala attenuates context-induced renewal of Pavlovian-conditioned alcohol-seeking.</a> <em style='font-style: italic'>Eur J Neurosci</em>. <b>38</b>, 2751-2761 (2013).</li><li>Chaudhri, N., Sahuque, L. L., Schairer, W. W., Janak, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Separable+roles+of+the+nucleus+accumbens+core+and+shell+in+context-+and+cue-induced+alcohol-seeking.">Separable roles of the nucleus accumbens core and shell in context- and cue-induced alcohol-seeking.</a> <em style='font-style: italic'>Neuropsychopharmacology</em>. <b>35</b>, 783-791 (2010).</li><li>Sparks, L. M., Sciascia, J. M., Ayorech, Z., Chaudhri, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vendor+differences+in+alcohol+consumption+and+the+contribution+of+dopamine+receptors+to+Pavlovian-conditioned+alcohol-seeking+in+Long-Evans+rats.">Vendor differences in alcohol consumption and the contribution of dopamine receptors to Pavlovian-conditioned alcohol-seeking in Long-Evans rats.</a> <em style='font-style: italic'>Psychopharmacology (Berl)</em>. <b>231</b>, 753-764 (2014).</li><li>Simms, J. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intermittent+access+to+20%+ethanol+induces+high+ethanol+consumption+in+Long-Evans+and+Wistar+rats.">Intermittent access to 20% ethanol induces high ethanol consumption in Long-Evans and Wistar rats.</a> <em style='font-style: italic'>Alcohol Clin Exp Res</em>. <b>32</b>, 1816-1823 (2008).</li><li>Wise, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Voluntary+ethanol+intake+in+rats+following+exposure+to+ethanol+on+various+schedules.">Voluntary ethanol intake in rats following exposure to ethanol on various schedules.</a> <em style='font-style: italic'>Psychopharmacologia</em>. <b>29</b>, 203-210 (1973).</li><li>Bouton, M. E., Westbrook, R. F., Corcoran, K. A., Maren, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Contextual+and+temporal+modulation+of+extinction:+behavioral+and+biological+mechanisms.">Contextual and temporal modulation of extinction: behavioral and biological mechanisms.</a> <em style='font-style: italic'>Biol Psychiatry</em>. <b>60</b>, 352-360 (2006).</li><li>Pavlov, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> <em style='font-style: italic'>Conditioned reflexes: an investigation of the physiological activity of the cerebral cortex</em>. , (1927).</li><li>Gibbon, J., Baldock, M. D., Locurto, C., Gold, L., Terrace, H. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Trial+and+intertrial+durations+in+autoshaping.">Trial and intertrial durations in autoshaping.</a> <em style='font-style: italic'>J Exp Psychol Anim Behav Process</em>. <b>3</b>, 264-284 (1977).</li><li>Holland, P. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CS-US+interval+as+a+determinant+of+the+form+of+Pavlovian+appetitive+conditioned+responses.">CS-US interval as a determinant of the form of Pavlovian appetitive conditioned responses.</a> <em style='font-style: italic'>J Exp Psychol Anim Behav Process</em>. <b>6</b>, 155-174 (1980).</li><li>Stein, L., Sidman, M., Brady, J. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Some+effects+of+two+temporal+variables+on+conditioned+suppression.">Some effects of two temporal variables on conditioned suppression.</a> <em style='font-style: italic'>J Exp Anal Behav</em>. <b>1</b>, 153-162 (1958).</li><li>Coleman, D. A., Hemmes, N. S., Brown, B. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Relative+durations+of+conditioned+stimulus+and+intertrial+interval+in+conditioned+suppression.">Relative durations of conditioned stimulus and intertrial interval in conditioned suppression.</a> <em style='font-style: italic'>J Exp Anal Behav</em>. <b>46</b>, 51-66 (1986).</li><li>Schwarz-Stevens, K. S., Cunningham, C. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pavlovian+conditioning+of+heart+rate+and+body+temperature+with+morphine:+effects+of+CS+duration.">Pavlovian conditioning of heart rate and body temperature with morphine: effects of CS duration.</a> <em style='font-style: italic'>Behav Neurosci</em>. <b>107</b>, 1039-1048 (1993).</li><li>Palm, S., Roman, E., Nylander, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differences+in+voluntary+ethanol+consumption+in+Wistar+rats+from+five+different+suppliers.">Differences in voluntary ethanol consumption in Wistar rats from five different suppliers.</a> <em style='font-style: italic'>Alcohol</em>. <b>45</b>, 607-614 (2011).</li><li>Gauvin, D. V., Moore, K. R., Holloway, F. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Do+rat+strain+differences+in+ethanol+consumption+reflect+differences+in+ethanol+sensitivity+or+the+preparedness+to+learn.">Do rat strain differences in ethanol consumption reflect differences in ethanol sensitivity or the preparedness to learn.</a> <em style='font-style: italic'>Alcohol</em>. <b>10</b>, 37-43 (1993).</li><li>Goodwin, F. L., Amit, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Relative+taste+thresholds+for+ethanol,+saccharin,+and+quinine+solutions+in+three+strains+of+rats+nonselected+for+ethanol:+a+comparative+study.">Relative taste thresholds for ethanol, saccharin, and quinine solutions in three strains of rats nonselected for ethanol: a comparative study.</a> <em style='font-style: italic'>Exp Clin Psychopharmacol</em>. <b>8</b>, 216-224 (2000).</li><li>Goodwin, F. L., Bergeron, N., Amit, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differences+in+the+consumption+of+ethanol+and+flavored+solutions+in+three+strains+of+rats.">Differences in the consumption of ethanol and flavored solutions in three strains of rats.</a> <em style='font-style: italic'>Pharmacol Biochem Behav</em>. <b>65</b>, 357-362 (2000).</li><li>Wilson, A. W., Neill, J. C., Costall, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strain+differences+in+ethanol+preference+and+reinforced+behaviour:+a+comparison+of+two-bottle+choice+and+operant+self-administration+paradigms.">Strain differences in ethanol preference and reinforced behaviour: a comparison of two-bottle choice and operant self-administration paradigms.</a> <em style='font-style: italic'>Behav Pharmacol</em>. <b>8</b>, 37-46 (1997).</li><li>Yap, C. S., Richardson, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extinction+in+the+developing+rat:+an+examination+of+renewal+effects.">Extinction in the developing rat: an examination of renewal effects.</a> <em style='font-style: italic'>Dev Psychobiol</em>. <b>49</b>, 565-575 (2007).</li><li>Carew, M. B., Rudy, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multiple+functions+of+context+during+conditioning:+a+developmental+analysis.">Multiple functions of context during conditioning: a developmental analysis.</a> <em style='font-style: italic'>Dev Psychobiol</em>. <b>24</b>, 191-209 (1991).</li><li>Chaudhri, N., Sahuque, L. L., Janak, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ethanol+seeking+triggered+by+environmental+context+is+attenuated+by+blocking+dopamine+D1+receptors+in+the+nucleus+accumbens+core+and+shell+in+rats.">Ethanol seeking triggered by environmental context is attenuated by blocking dopamine D1 receptors in the nucleus accumbens core and shell in rats.</a> <em style='font-style: italic'>Psychopharmacology (Berl)</em>. <b>207</b>, 303-314 (2009).</li></ol>

<p class="jove_content">所有的实验程序批准了康考迪亚大学动物研究伦理委员会，并根据从加拿大委员会动物保护的指导方针。 <span style="font-size: 14px; line-height: 28px;">这篇文章的开放获取出版成为可能，赞助医学Associates公司</span> </p>

<p class="jove_content">结果，从这个过程表明，离散环境刺激是经常陪伴分娩的酒精可以获取驾驶酒精寻求行为的能力。他们还表明，与现有的可用性或不存在酒精相关的情境刺激可以引导条件的行为反应，以离散酒精预测线索。 </p><p class="jove_step">该协议中的关键步骤</p><p class="jove_content">在本任务上下文包括刺激来说是外部的大鼠。然而，大鼠在实验的感受性的状态也可以构成一个"语境"，可能会影响重建<sup>20。</sup>因此重要的是要，观察者大鼠的重建试验之前可能发生的，改变其感受性状态，如颅内microinfusions或全身注射任何程序。此外，习惯以microinfusions或全身注射前应该既灭绝和PDT s内进行essions，为了防止这样的程序从变得与实验中的一个特定阶段相关联。 </p><p class="jove_content">时间参数，如CS持续时间，CS-US间隔，并intertrial间隔（ITI），人们早已知道，影响了空调的各种调理范例<sup>21-26</sup>的响应。类似地，时间参数可影响观察中的程序的更新效果。任何一组参数比在协议中指定的其他应通过实验验证了在试验性研究进行到使用它们中较大的调查之前。 </p><p class="jove_step">修改和故障排除</p><p class="jove_content">此前有研究发现，乙醇，老鼠消耗的笼子量可以相差从大鼠购买<sup>17,27</sup>供应商的功能。因此，供应商是用于研究的这个阶段的一个重要的考虑因素。同样，大鼠品系的选择应当被共小心nsidered，因为有在乙醇消耗<sup>28-31</sup>菌株的差异的许多报告。 </p><p class="jove_content">在厌恶空调范式以前的工作表明，大鼠的发育年龄会影响观察巴甫洛夫条件性恐惧反应<sup>32</sup>续期。的重建效果非常幼鼠缺乏（未满产后20天）已建议是由于上下文信息<sup>33</sup>减值编码。大鼠在本过程中所用的发育年龄，因此应考虑在内。 </p><p class="jove_content">巴甫洛夫的条件酒精寻求行为重建已观察到10％的<sup>9,16，15％，14％</sup>或<sup>20％15</sup>乙醇溶液在笼乙醇访问和实验PDT相使用。研究人员可以使用任何的这些乙醇浓度为在其laborator建立此步骤的目的IES。 </p><p class="jove_content">在收购巴甫洛夫歧视的培训是非常重要的每届会议结束后，检查流体口，以确保所有交付的乙醇已被消耗。让老鼠在空调室额外10  - 每次会议结束后15分钟可完成的PDT早期鼓励，这不是在会议期间消耗任何酒精的消耗。只留下未使用的乙醇，在端口的数量应该减少为PDT的进展。如果由PDT大鼠年底或者是（A）不消耗所有的乙醇和/或（b）没有回应CS +，那么这些科目应该从研究被丢弃。最可靠的大鼠应对更多的CS +比CS  - 。然而，一些可能只在高级别响应这两个线索，从而没有表现出歧视的证据。大鼠显示高响应到CS +和CS-PDT过程中不会从研究丢弃。根据我们的经验，这些受试者表现出明显的歧视在第一消光会话在无乙醇，这表明它们高水平的PDT期间响应于CS-是由乙醇中的流体端口的存在下驱动。这些主题也倾向于表现健壮重建的效果。 </p><p class="jove_step">该过程的局限性</p><p class="jove_content">因为重建试验在无乙醇进行的，由CS +引起空调端口条目逐渐横跨测试会话减弱。因此，在试验中，对这些实验诱导的变化可以评估所产生的行为的总数量，是相当低的。因为在这个任务响应往往在开始时与测试会议结束越高，研究实验操作对条件的试点按试行响应的影响是很重要的。 </p><p class="jove_content">参赛作品进入流体容器提供主要依赖的措施完成这项任务。然而，一个错误的端口条目可能是REGI如果动物是足够接近的流体容器破裂的红外光束穿过流体端口，其晶须的开口stered。虽然罕见，错误的反应是很明显的占港口的急剧增加条目相对于在之前的会话对象的行为。偷拍的动物将有助于可能的错误反应的检测，并允许通过的老鼠在整个训练和测试表现出的行为更精致的分析。 </p><p class="jove_step">技术相对于现有的/替代方法的意义</p><p class="jove_content">的觅药行为的情况下引发的重建是使用工具调节任务，其中主要因变量是一个操作性的反应，主要是研究如杠杆记者<sup>8,34</sup>或鼻子捅<sup>12。</sup>在本程序中，寻求药物的反应是"空调途径&#39;，是受的论述引发的流体端口在CS +。此反应是通过巴甫洛夫学习，这是学习过程，其介导的环境刺激和药物滥用在人类的药理作用之间的关联的形成可能获得的。 </p><p class="jove_step">未来的应用</p><p class="jove_content">这个任务可以组合使用，神经药理学，光遗传学和神经化学研究中涉及的巴甫洛夫空调酒精寻求行为<sup>16</sup>环境诱导重建的神经机制。此外，规范巴甫洛夫空调酒精寻求行为的采集和灭绝行为和神经机制可以进行调查。最后，这个任务可以被用来探索灭绝的操作可能会阻止更新，转化研究旨在减少药物的线索暴露疗法在人类阿迪后反应相关的环境背景来预测药物线索的影响的一个重要方向CTS。 </p>

<p class="jove_content">剩下的就是清醒面对个人从酗酒症患了相当大的挑战。禁欲是脆弱的时候对环境刺激的经常陪饮酒，可以通过巴甫洛夫条件反射，成为与醉<sup>1,2</sup>相关的行为，心理和生理的影响。接触酒精的预测暗示可以引起条件反射，如酒精的渴望，这可以促进酒精的求医行为，以促进复发<sup>3,4。</sup> </p><p class="jove_content">行为刻板序列，导致饮酒会导致某些类型的刺激来进行常规前摄入酒精的药理作用，立即体验。例如，视觉，嗅觉和酒精的味道醇的感官性状是可靠的先中毒。除了这样的线索，这被称为"不连续"或"施马L&#39;线索，环境背景中，药物经常使用也能招来渴求<sup>5,6。</sup>暴露于其中的药物已使用过，因此有可能复发<sup>7</sup>临界触发物理位置。 </p><p class="jove_content">动物模型已经发展到研究介导的药物相关背景的觅药行为<sup>8-13</sup>影响的神经机制。本文所描述的程序允许与饮酒相关的背景如何能调节由离散，酒精预测巴甫洛夫线索引起酒精寻求行为的调查。 </p><p class="jove_content">巴甫洛夫歧视的训练是在一个特定的环境背景下，在老鼠被训练两个听觉条件刺激，这是搭配酒精CS +和CS-，是不是与行为上进行区分。灭绝会话，然后在不同的背景下，地方响应的CS进行+减少酒精的结果被拒绝。随后，再次暴露于酒精相关联，巴甫洛夫训练方面引发酒精寻求行为选择性增加了CS +引起，在应对CS  - 没有变化。这样的结果，这是我们一直复制<sup>9,14-16，</sup>从其中药物的上下文已经发现，刺激与药物递送<sup>10,13</sup>相关联的操作性响应的更新工具调节程序扩展的发现。 </p>

<table><tbody><tr><td>Heavy-duty utility cart</td><td>Rubbermaid</td><td>#4520-88</td><td>Used to transport rats in their home cage from the colony room to the behavior room or other facilities</td></tr><tr><td>Rats, Long-Evans</td><td>Harlan</td><td></td><td>Rats weighed 220-240 g on arrival</td></tr><tr><td>Ohaus scale</td><td>Fisher</td><td>#S402421</td><td>For weighing rats; tare the bottom of a plastic container first, then put the rat in it to weigh it</td></tr><tr><td>Beta-chips, aspen</td><td>Harlan</td><td>#7090A</td><td>Bedding for home cage</td></tr><tr><td>Nylabone</td><td>Bio-Serv</td><td>#K3580</td><td>Enrichment provided in the home cage</td></tr><tr><td>Autoclavable rodent chow</td><td>Agribrands, Charles River</td><td>#5075</td><td>For feeding rats</td></tr><tr><td>Wire bar cage lid</td><td>Ancare</td><td>#R20SS2B</td><td>Custom made with two slots for&amp;nbsp; bottles</td></tr><tr><td>Cage bottom</td><td>Ancare</td><td>#R20PC</td><td>To house rats</td></tr><tr><td>Stoppers</td><td>Ancare</td><td>#8.5</td><td>Rubber stoppers to occlude opening in water bottles &amp;amp; graduated cylinders; goes with ball point sipper tubes&amp;nbsp;</td></tr><tr><td>Ball point tubes, 1.5&quot; length</td><td>Ancare</td><td>#TD-99</td><td>Inserted in stoppers, enables rats to drink from water bottles and graduated cylinders</td></tr><tr><td>Water bottles</td><td>Ancare</td><td>#FSPC8HT</td><td>473 ml (16 oz) capacity, needs to be occluded with stopper</td></tr><tr><td>Graduated cylinders, 100 ml</td><td>Fisher</td><td>#0300741</td><td>To contain ethanol during alcohol exposure in the home cage; spouted end needs to be cut off to enable occlusion with stoppers</td></tr><tr><td>Mettler scale</td><td>Mettler Toledo</td><td>#MS6001S</td><td>For weighing water bottles and ethanol cylinders</td></tr><tr><td>Polyethylene tubing, 1/32&quot; inner diameter,&amp;nbsp; 1/32&quot; wall thickness, 3/32&quot; outside diameter</td><td>Fisher</td><td>#14-169-1A</td><td>To connect 20 ml ethanol syringe to fluid port</td></tr><tr><td>Needle, 18 g, 1.5&quot; length</td><td>Fisher</td><td>#B305199</td><td>To connect polyethylene tubing to ethanol syringes; needs to be filed</td></tr><tr><td>Syringes, 20 ml, Luer-Lok non-sterile</td><td>Fisher</td><td>#1482316J</td><td>To contain ethanol on the fluid pumps; needs to be connected to the polyethylene tubing by a 18 G 1 1/2 needle</td></tr><tr><td>Syringes, 60 ml, Luer-Lok non-sterile</td><td>Fisher</td><td>#14-820-11</td><td>To flush polyethylene tubing after PDT sessions</td></tr><tr><td>Single speed syringe pump, 3.33 rpm</td><td>Med Associates Inc.</td><td>#ENV-018MD</td><td>To hold 20 ml ethanol syringes and deliver ethanol</td></tr><tr><td>Fluid port</td><td>Med Associates Inc.</td><td>#ENV-254-CB</td><td>To enable ethanol delivery during PDT sessions; connected to ethanol syringes with polyethylene tubing</td></tr><tr><td>Port entry infrared detector</td><td>Med Associates Inc.</td><td>#ENV-215M</td><td>Fixed on both sides of&amp;nbsp; fluid port; need 2 per fluid port</td></tr><tr><td>Houselight, 28 V, 100 mA</td><td>Med Associates Inc.</td><td>#ENV-135M</td><td>Provides general lighting in conditioning chamber</td></tr><tr><td>Clicker module</td><td>Med Associates Inc.</td><td>#ENV-225SM</td><td>Auditory stimulus for conditioning chamber</td></tr><tr><td>White noise generator with speaker</td><td>Med Associates Inc.</td><td>#PHM-100</td><td>Auditory stimulus for conditioning chamber</td></tr><tr><td>Bar floor</td><td>Med Associates Inc.</td><td>#ENV-009A-GF</td><td>To go with modular test chamber</td></tr><tr><td>Bench coat, absorbent</td><td>VWR</td><td>#89126-790</td><td>Absorbent paper to put in metal tray, needs to be cut to fit the metal tray</td></tr><tr><td>Polycarbonate sheet, 1/8&quot; thick, 12-5/8&quot; x 10&quot;</td><td>Johnston Plastics</td><td>#30102515</td><td>To make smooth transparent floor insert used for context 1. Needs to be cut in 11.5&quot; x 12.25&quot; pieces</td></tr><tr><td>Aluminium sheet perforated, 0.063&quot; thick, 48&quot; x 96&quot;, 0.250&quot; holes x 0.375&quot; centers</td><td>Anica Steel</td><td></td><td>To make perforated floor insert used for context 2. Needs to be cut in 11.5&quot; x 12.25&quot; pieces</td></tr><tr><td>Black cardboard, 0.053&quot; thick, 28&quot; x 44&quot;</td><td>Omer DeSerres</td><td>#P1909</td><td>To construct panels covering the ceiling, door and back wall of the conditioning chamber in context 1. Needs to be cut to size. Each chamber needs three panels measuring approximately 11.5&quot; x 13.25&quot;. The panels can be joined by the narrower side using duct tape.</td></tr><tr><td>All-purpose strength duct tape, 1.88&quot; x 45 yd.</td><td>Duck Tape</td><td></td><td>Adhesive material to connect the black cardboard panels used to cover the back wall, ceiling and door in context 1.</td></tr><tr><td>Modular test chamber</td><td>Med Associates Inc.</td><td>#ENV-009A</td><td>Conditioning chamber</td></tr><tr><td>Sound attenuating cubicles</td><td>Med Associates Inc.</td><td>#ENV-200R3AM</td><td>Comes with installed 28 V DC fan (#ENV-025F)</td></tr><tr><td>Petri dish</td><td>Fisher</td><td>#08748B</td><td>Bottom only, to contain the sprayed solution that provides the odor stimulus; needs to be centered in the metal tray in conditioning chambers</td></tr><tr><td>PCI interface package</td><td>Med Associates Inc.</td><td>#DIG-700P2-R2</td><td>Connects tabletop interface cabinet to computer; includes 1 interface card, 1 Decode card, 1 ribbon cable and 1 28 V DC power cable</td></tr><tr><td>Large tabletop cabinet and power supply</td><td>Med Associates Inc.</td><td>#SG-6510D</td><td>Used to contain the 12 cards included in the SmartCrtrl 8 Input, 16 Output package</td></tr><tr><td>SmartCtrl 8 Input, 16 Output package</td><td>Med Associates Inc.</td><td>#DIG-716P2</td><td>Used to connect and control the devices in the conditioning chamber. The package includes all the cables, the interface module and the connection panel.</td></tr><tr><td>Med PC IV software</td><td>Med Associates Inc.</td><td>#SOF-735</td><td>Software to run programs. Needs to be installed on the computer.</td></tr><tr><td>Monitor LG, 19&quot; LCD</td><td>Concordia computer store</td><td>#W1942TQ-BF</td><td>Computer monitor; to go with computer running Med PC IV</td></tr><tr><td>HP Z200 tower workstation</td><td>Concordia computer store</td><td>#BZ788US#ABA</td><td>Computer on which Med PC IV is run</td></tr><tr><td>Benzaldehyde, &amp;ge;99%</td><td>Les produits chimiques OMEGA Chemical Company Inc.</td><td>#B37-50</td><td>Dilute in tap water for almond context odor</td></tr><tr><td>Lemon oil, cold pressed, California</td><td>Sigma Aldrich</td><td>#W262528-1KG-K</td><td>Dilute in tap water for lemon context odor</td></tr><tr><td>Ethyl alcohol, 95%</td><td>Commercial Alcohols</td><td></td><td>Dilute in tap water to desired concentration</td></tr></tbody></table>

a procedure to observe context-induced renewal of pavlovian-conditioned alcohol-seeking behavior in rats

<p class="jove_content">环境背景中，滥用药物消耗可能引发的渴求，一种主观巴甫洛夫空调的响应，可以促进戒断吸毒者寻求药物的行为，并迅速复发。我们已经开发了一个程序，研究调解方面对酒精寻求行为大鼠的影响，行为和神经过程。以下驯化的味道，并在笼子15％乙醇中的药理作用，雄性Long-Evans大鼠接受巴甫洛夫辨别训练（PDT）在空调室中。在每一个日常（周一至周五）PDT会议，每两个不同的10秒的听觉条件刺激16项试验发生。在一个刺激下，CS +，0.2毫升15％乙醇中的被输送到流体端口用于口服消费。第二个刺激下，CS-，是不是搭配乙醇。在整个会议期间，CS-期间的条目到在CS +增加流体端口，而项稳定在一个较低的水平，表明predi被获取的CS +和乙醇之间莫如关联。在PDT每个室配备的视觉，嗅觉和触觉刺激的上下文的具体结构。继PDT，灭绝培训在同一室内的目前搭载的是情境的刺激不同的配置进行。在CS +和CS  - 都和以前一样，但乙醇是功不可没的，这会导致CS +中的端口条目逐步下降。在测试中，将大鼠放回PDT上下文并呈现在CS +和CS-和以前一样，但没有乙醇。此操作会触发一个健壮的和选择性的增加醇期间所作的预测CS +端口条目的数量，与在CS-响应期间没有变化。这种效应被称为上下文诱导重建，示出了与饮酒有关的刺激响应于巴甫洛夫醇线索醇寻求行为上下文的强大能力。 </p>

<p class="jove_content">在家里笼间歇乙醇访问: - 12届（ <strong>图1）</strong>乙醇消耗率（g / kg）和横跨在笼子间歇乙醇访问会话乙醇偏好增加，一般在8达到稳定水平。在<strong>图1</strong>中所示的数据集的，稳定的乙醇消耗量对面的家笼乙醇访问的最后两个会话平均值从1.33不等- 6.44克/公斤个体大鼠。实验的家笼乙醇消耗量相可一旦克/公斤消耗趋于平稳地停下来，并且将大鼠保持在该稳定的饮用水为会话数量的水平。 </p><p class="jove_content">为了分析这一阶段的数据，进行方差分析（ANOVA）独立重复测量分析，在整个会议的乙醇消耗率（g / kg）和乙醇偏好的受试者内因素。 </p><p class="jove_content">原理图的情况下引发的重建过程:的每个阶段实验步骤（PDT，消光，重建试验）示于<strong>图2。</strong>参见图题作进一步的详细信息。 </p><p class="jove_content">应对措施和数据分析:在下面描述的所有行为阶段，在CS +和CS-期间的端口进入的反应是归参照前政务司司长基线口进入反应。创建的归一化的CS措施，减去预先CS基线间隔期间所作的端口条目的数量（在10秒前立即CS发病）在CS +和CS-的说明取得端口中的条目数。归一化的CS +和CS-正常化措施作为行为指标特别是通过CS演示，高于基线水平升高引起。 </p><p class="jove_content">分别进行重复测量的方差分析与会话和CS型（CS +与CS-）为PDT和消光相重复受试者内因素。跨期比较（PDT，消光，更新人的测试），使用数据通过光动力和灭绝的最后两次会议，并更新测试数据的重复测量方差分析的一个会话平均值。到上显著主效应和交互作用，利用<em>事后</em> t检验为独立或成对样本被用于校正多重比较的跟进。标准的意义定为α= 0.05。 </p><p class="jove_content"> PDT:入境口岸应对整个PDT会话CS +增加，而进港的回应到CS  - 保持低而稳定，整体的。需要注意的是端口条目反应的CS-可能在PDT中训练的初期会稍微增加;然而，响应于所述CS-制成端口条目稳定在低得多的电平高于在响应于所述CS +制成。成功的判断是通过在端口条目具有统计学显著高程在CS证明+相比，CS-（ <strong>图3）。</strong>这一结果表明，巴甫洛夫空调酒精寻求行为已成为连接建立到CS +，但不是CS-。 </p><p class="jove_content">灭绝:入境口岸的反应到CS +跨灭绝会逐渐下降。口岸入境反应的CS-保持整个会话灭绝低而稳定。理想情况下，歧视回应被灭绝训练结束废止，就证明了缺乏端口条目之间有统计学差异显著到CS +和CS-。然而，这是不寻常的某些程度的鉴别响应依然存在，甚至在消光训练结束。在这种情况下，以验证端口条目响应于所述CS +灭绝训练比端口条目响应于所述CS +灭绝的起始统计学下，以及在PDT的端部的端部是很重要的（ <strong>图3）</strong> 。结果，这种模式表明，巴甫洛夫空调酒精寻求行为已显著扑灭。 </p><p class="jove_content">上下文诱发更新测试:港口输入响应于所述CS +增加的情况下诱导的重建试验，相对于消光训练结束时观察到的CS +端口条目。这种增加是有选择性的CS +，作为端口条目添加到CS-保持不变。此外，相比于端口条目中的上下文诱导重建试验的CS-（ <strong>图4）</strong>端口表项到CS +在统计上是升高的。灭绝和测试之间的CS +端口的条目，以及CS +和内部测试CS-端口项的比较比较的统计确认，表示巴甫洛夫空调酒精寻求行为引起的相关背景酒精测试时有选择续约。 </p><p class="jove_content" fo:keep-together.within-page="always"><img alt="图1" fo:content-width="4in" src="/files/ftp_upload/51898/51898fig1highres.jpg" width="400" /><br /> <strong>图1升级乙醇消耗和偏好诱导的家笼间歇乙醇访问的。</strong>平均数与＃177;扫描电镜<strong>（一）</strong>乙醇消耗率（g / kg）和横跨在笼子间歇乙醇访问12次<strong>（B）</strong>乙醇的偏好。这两项措施通常在会话增加，然后趋于稳定。整个家笼乙醇进入最后的两会稳定的乙醇消费量从平均介于1.33  - 6.44克/公斤个人的影响。使用雄性Long-Evans大鼠饮用15％（V / V）乙醇，得到这些数据。 </p><p class="jove_content" fo:keep-together.within-page="always"><img alt="图2" fo:content-width="4in" src="/files/ftp_upload/51898/51898fig2highres.jpg" width="400" /><br /> <strong>图2，实验过程的示意图</strong>的过程分为三个阶段:巴甫洛夫辨别训练（PDT），消光，和上下文诱导重建的考验。在每个PDT会话，只收到一个听觉条件刺激（CS +）的信号乙醇的交付和16项试验的16项试验第二听觉刺激（CS-）不与乙醇输送有关。 PDT会发生在语境中，视觉，嗅觉特定的配置，和触觉刺激的组成。在灭绝的会议，这是在情境B进行，一组不同的视觉，嗅觉，触觉的刺激所组成，在CS +和CS-呈现，但乙醇是功不可没的。对于环境诱导重建试验，大鼠放回背景信息，而CS +和CS -都没有给出乙醇。 <a href="https://www.jove.com/files/ftp_upload/51898/51898fig2highres.jpg" target="_blank">请点击这里查看该图的放大版本。</a> </p><p class="jove_content" fo:keep-together.within-page="always"><img alt="图3" fo:content-width="4in" src="/files/ftp_upload/51898/51898fig3highres.jpg" width="400" /><br /> <strong>图3采集和歧视巴甫洛夫空调响应乙醇。</strong>平均值±标准差归港进口M <strong>灭绝</strong>阿德在CS +和CS-PDT整个过程中（会话1  -  18）的背景信息和消光（会话19  -  26）的语境B.这些数据是用男性Long-Evans大鼠获得的，经过培训的有10％（V / V）乙醇作为非条件刺激（美国）呈献给联同PDT在CS +。 * P &lt;0.05，CS +与CS-。图最初发表于Chaudhri，Sahuque，与加纳克（2008年）。使用来自爱思唯尔的权限。 </p><p class="jove_content" fo:keep-together.within-page="always"><img alt="图4" fo:content-width="5in" src="/files/ftp_upload/51898/51898fig4highres.jpg" width="500" /><br /> <strong>图4上下文诱导</strong>的CS +和CS-期间在语境中的PDT会议上提出<strong>巴甫洛夫空调响应乙醇。</strong>平均值±标准差归端口项，在情境B灭绝的会议，并更新<strong>测试更新</strong>的语境A.数据是平均在过去的两届会议，PDT和灭绝;更新的测试是一个单一的会话。这些使用雄性Long-Evans大鼠，经过培训的，用10％（V / V）乙醇作为非条件刺激（US），这是PDT中提出在与CS +协会获得的数据。 * P &lt;0.05; ** P &lt;0.001，CS +与CS-。 ＃P &lt;0.05，CS + PDT与CS +灭绝。 ^ P &lt;0.05，CS +灭绝与CS +的测试。图最初发表于Chaudhri，Sahuque，与加纳克（2008年）。使用来自爱思唯尔的权限。 </p>

Watch this Scientific Journal Video about A Procedure to Observe Context-induced Renewal of Pavlovian-conditioned Alcohol-seeking Behavior in Rats at JoVE.com

A Procedure to Observe Context-induced Renewal of Pavlovian-conditioned Alcohol-seeking Behavior in Rats

<p class="jove_content">的过程来研究相关的醇环境的上下文的能力来触发的醇寻求行为大鼠续期进行说明。 </p>

一个过程来观察大鼠巴甫洛夫空调酒精寻求行为的背景下引发的重建

Environmental contexts in which drugs of abuse are consumed can trigger craving, a subjective Pavlovian-conditioned response that can facilitate ...

a-procedure-to-observe-context-induced-renewal-pavlovian-conditioned

Research

JoVE Journal

Behavior

12.7K 次观看.  Concordia University. 的过程来研究相关的醇环境的上下文的能力来触发的醇寻求行为大鼠续期进行说明。 

视频: A Procedure to Observe Context-induced Renewal of Pavlovian-conditioned Alcohol-seeking Behavior in Rats

Esterification

<p>Source: Lara Al Hariri at the University of Massachusetts Amherst, MA, USA</p>
<ol class="note-items">
	<li data-note-item="1" data-parent-collapse="">Preparation of the Laboratory<button class="expand">Expand</button>
	<p><em>Here, we show the laboratory preparation for 10 students working in pairs, with some excess. Please adjust quantities as needed.</em></p>
	<ul class="lab-items">
		<li data-sub-note-item="1-2">
		<div class="lab-step">First, put on a lab coat, safety glasses, and nitrile gloves.<strong> Note:</strong> Some of the reagents are volatile or have unpleasant odors, so you will handle them in a fume hood.</div>
		</li>
		<li data-sub-note-item="1-3">
		<div class="lab-step">Ensure that you have glass and organic waste containers and that each sink has paper towels.</div>
		</li>
		<li data-sub-note-item="1-4">
		<div class="lab-step">Follow the table to designate codes for the carboxylic acids and alcohols used in this lab. The carboxylic acids are coded A through C, and the alcohols are coded D through I. The students will use a 3:1 molar ratio of alcohol to carboxylic acid in the reaction.
		<table align="center" height="224" style="border-collapse: collapse; font-size: 17px; line-height: 24px;">
			<tbody>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Code</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Compound</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>MW<br />
					(g/mol) </strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Density at RT (g/cm<sup>3</sup>)</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Moles per vial</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Grams per vial</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>cm<sup>3</sup> per vial </strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Number of vials</strong></td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">A</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Acetic acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">60.05</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1.049</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.07</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">4.2035</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">4.0</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">3</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">B</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Butyric acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">88.11</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.953</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.07</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">6.1677</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">6.5</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">3</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">C</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Anthranilic acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">137.14</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">-</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.07</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">9.5998</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">-</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">D</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1-Propanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">60.10</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.803</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.21</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">12.6210</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">15.7</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">E</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Isoamyl alcohol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">88.15</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.810</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.21</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">18.512</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">22.8</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">F</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1-Butanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">74.12</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.810</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.21</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">15.565</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">19.2</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">G</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Ethanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">46.07</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.789</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.21</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">9.6747</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">12.3</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">H</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Methanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">32.04</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.791</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.21</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">6.7284</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">8.5</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">2</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">I</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1-Octanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">130.23</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.830</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">0.21</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">27.348</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">32.9</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1</td>
				</tr>
			</tbody>
		</table>
		</div>
		</li>
		<li data-sub-note-item="1-5">
		<div class="lab-step">Prepare the three carboxylic acids: acetic acid, butyric acid, and anthranilic acid. Each group will need 0.07 moles of their assigned carboxylic acid in a vial.</div>
		</li>
		<li data-sub-note-item="1-6">
		<div class="lab-step">Tare a 10-mL glass vial on an analytical balance in a fume hood. Use a Pasteur pipette to measure 4.2035 g of acetic acid, which will be about 4 mL. Cap the vial and label it &#8216;A&#8217;. Prepare two more labeled vials of acetic acid in the same way.</div>
		</li>
		<li data-sub-note-item="1-7">
		<div class="lab-step">Weigh 6.1677 g of butyric acid, which will be about 6.5 mL, in a tared 10-mL vial. Cap the vial and label it &#8216;B&#8217;. Prepare two more vials of butyric acid in the same way.</div>
		</li>
		<li data-sub-note-item="1-8">
		<div class="lab-step">Use a small spatula to weigh 9.5998 g of solid anthranilic acid in a tared 10-mL vial. Cap the vial and label it &#8216;C&#8217;. You should now have a total of seven vials of carboxylic acid.</div>
		</li>
		<li data-sub-note-item="1-9">
		<div class="lab-step">Prepare the 7 alcohols. Each group will need 0.21 moles of their assigned alcohol in a vial. Use the table as a guide to prepare and label one vial of each alcohol. Prepare and label two vials of methanol.</div>
		</li>
		<li data-sub-note-item="1-10">
		<div class="lab-step">You should now have a total of seven vials of alcohol. Keep the reagent vials in the instructor&#39;s hood for now and put away the stock bottles of the carboxylic acids and alcohols.</div>
		</li>
		<li data-sub-note-item="1-11">
		<div class="lab-step">Assign each student group one of these seven combinations of reagents.
		<table align="center" height="224" style="border-collapse: collapse; font-size: 17px; line-height: 24px;">
			<tbody>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Ester code</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Carboxylic acid </strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Alcohol</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Ester product</strong></td>
					<td style="border: 1px solid; padding: 0px; text-align: center;"><strong>Scent</strong></td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">AD</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Acetic acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1-Propanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Propyl acetate</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Pear</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">AE</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Acetic acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Isoamyl alcohol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Isoamyl acetate</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Banana</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">AI</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Acetic acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1-Octanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Octyl acetate</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Orange</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">BF</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Butyric acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">1-Butanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Butyl butyrate</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Pineapple</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">BG</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Butyric acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Ethanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Ethyl butyrate</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Strawberry</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">BH</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Butyric acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Methanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Methyl butyrate</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Apple</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px; text-align: center;">CH</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Anthranilic acid</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Methanol</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Methyl anthranilate</td>
					<td style="border: 1px solid; padding: 0px; text-align: center;">Grape</td>
				</tr>
			</tbody>
		</table>
		</div>
		</li>
		<li data-sub-note-item="1-12">
		<div class="lab-step">Prepare or obtain seven vials of the fruit scents and label them with the fruit names as references.</div>
		</li>
		<li data-sub-note-item="1-13">
		<div class="lab-step">Set out the following glassware and equipment at each student lab station (we suggest that students work in pairs):</div>
		</li>
		<li data-sub-note-item="1-14">
		<div class="lab-step">Put bottles of saturated sodium bicarbonate and 3 M sulfuric acid in a dedicated fume hood, along with a roll of plastic paraffin film and scissors.</div>
		</li>
		<li data-sub-note-item="1-15">
		<div class="lab-step">Set out filter paper and Pasteur pipettes in a central area so that every student group can easily access them.
		<table align="center" height="224" style="border-collapse: collapse; font-size: 17px; line-height: 24px;">
			<tbody>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Lab stand</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;2&#160;&#160;&#160;&#160;3-prong clamps</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Stir plate</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Lab jack</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Heating mantle</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Temperature controller</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;2&#160;&#160;&#160;&#160;Pieces of tubing (for condenser)</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Joint clip</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Tube of vacuum grease</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Box of laboratory wipes</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;10-mL graduated cylinder</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;600-mL beaker</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;50-mL round-bottom flask and flask stand</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Standard condenser</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Small stir bar</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Glass rod</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;1&#160;&#160;&#160;&#160;Package of pH paper</td>
				</tr>
				<tr>
					<td style="border: 1px solid; padding: 0px;">&#160;2&#160;&#160;&#160;&#160;Pasteur pipette bulbs</td>
				</tr>
			</tbody>
		</table>
		</div>
		</li>
		<li data-sub-note-item="1-16">
		<div class="lab-step">Just before the lab, fill a large insulated cooler with crushed ice. Place the cooler and an ice scoop in a central area in the lab.</div>
		</li>
		<li data-sub-note-item="1-17">
		<div class="lab-step">When the students arrive, show them how to safely waft vapors before giving them their assigned reagents.</div>
		</li>
	</ul>
	</li>
</ol>

Esterification: Synthesis of Ester by Fischer Esterification - Prep

酯化作用

Source: Lara Al Hariri at the University of Massachusetts Amherst, MA, USA

	Preparation of the LaboratoryExpand
	Here, we show the laboratory preparation ...

教育

JoVE Lab Manual

化学

Lab Manual Sub Articles

Identifying Alcohols

<p>Source: Lara Al Hariri and Ahmed Basabrain at the University of Massachusetts Amherst, MA, USA</p>
<ol class="note-items">
	<li data-note-item="1" data-parent-collapse="">Ferric Chloride Test for Phenols<button class="expand">Expand</button>
	<p>In this lab, you will identify an unknown alcohol using the ferric chloride test, the Jones test, and the Lucas test. You&#39;ll test known alcohols alongside the unknown alcohol as examples of positive and negative results for each test.</p>
	<p>The four known alcohols are 1-butanol, a primary alcohol, 2-butanol, a secondary alcohol, 2-methyl-2-propanol, a tertiary alcohol, and phenol. The four possible unknown alcohols are 1-propanol, 2-propanol, 2-methyl-2-butanol, and para-chlorophenol.</p>
	<p>You&#39;ll start with the ferric chloride test for the presence of phenols. Iron(III) chloride, or ferric chloride, forms a brown complex when it&#39;s dissolved in water. If you add a phenol to this solution, a purple iron(III)-phenol complex will form instead. This effect is not observed with non-aromatic or aliphatic alcohols.</p>
	<ul class="lab-items">
		<li data-sub-note-item="1-4">
		<div class="lab-step">Put on a lab coat, safety glasses, and gloves before you begin. <strong>Note:</strong> The alcohols that you will test are toxic and flammable, and the reagents that you will use are toxic and corrosive, so you will perform this lab in a fume hood.</div>
		</li>
		<li data-sub-note-item="1-5">
		<div class="lab-step">Now, get your assigned unknown alcohol from your instructor and bring it to your fume hood. Label a 250-mL beaker &#8216;aqueous metal waste&#8217;.</div>
		</li>
		<li data-sub-note-item="1-6">
		<div class="lab-step">Next, put five small test tubes in a rack and label them &#8216;1-butanol&#8217;, &#8216;2-butanol&#8217;, &#8216;2-methyl-2-propanol&#8217;, &#8216;phenol&#8217;, and &#8216;unknown&#8217;. Bring the rack to the analytical balance to obtain phenol.</div>
		</li>
		<li data-sub-note-item="1-7">
		<div class="lab-step">If your unknown is a solid, bring it with you. Weigh about 0.2 g of phenol and pour it into the corresponding tube. Do the same for your unknown if it is a solid and then return to your hood.</div>
		</li>
		<li data-sub-note-item="1-8">
		<div class="lab-step">Now label three small vials &#8216;1-butanol&#8217;, &#8216;2-butanol&#8217;, and &#8216;2-methyl-2-propanol&#8217;.</div>
		</li>
		<li data-sub-note-item="1-9">
		<div class="lab-step">Bring the vials to the solvent hood and use clean Pasteur pipettes to fill each vial with about 1 mL of the matching alcohol.<strong> Note: </strong>Do not reuse pipettes.</div>
		</li>
		<li data-sub-note-item="1-10">
		<div class="lab-step">Next, obtain at least four Pasteur pipettes and a 250-mL beaker. Get more pipettes whenever you need them, and don&#39;t put used pipettes back in the beaker.</div>
		</li>
		<li data-sub-note-item="1-11">
		<div class="lab-step">In your fume hood, pipette 3 &#8211; 4 drops of 1-butanol, 2-butanol, and 2-methyl-2-propanol into the corresponding tubes.</div>
		</li>
		<li data-sub-note-item="1-12">
		<div class="lab-step">To the phenol tube, add several drops of deionized water and shake to mix. This will provide better visual results for the ferric test.</div>
		</li>
		<li data-sub-note-item="1-13">
		<div class="lab-step">If your unknown alcohol is a liquid, use a clean pipette to place 3 &#8211; 4 drops of it in the unknown test tube.</div>
		</li>
		<li data-sub-note-item="1-14">
		<div class="lab-step">Now, obtain the bottle of iron(III) chloride solution and add 2 &#8211; 3 drops to each test tube.</div>
		</li>
		<li data-sub-note-item="1-15">
		<div class="lab-step">Stir each mixture well with a glass rod. Use deionized water to rinse off residual alcohol before mixing the contents of the next tube. Make sure that the phenol dissolves completely along with the unknown if it is a solid.</div>
		</li>
		<li data-sub-note-item="1-16">
		<div class="lab-step">Wait 5 min before comparing your unknown to the known solutions. <strong>Note:</strong> If your unknown solution is purple, like the phenol solution, then your unknown is a phenol derivative. If it looks like the other three tubes, it is not a phenol derivative. Record the results of the test in your lab notebook.
		<h4><strong>Table 1: Identifying Unknown Alcohol</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td style="text-align: center;"><strong>Alcohol</strong></td>
					<td style="text-align: center;"><strong>Ferric Chloride Test</strong></td>
					<td style="text-align: center;"><strong>Jones Test</strong></td>
					<td style="text-align: center;"><strong>Lucas Test</strong></td>
				</tr>
				<tr>
					<td>1-butanol</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td>2-butanol</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td>2-methyl-2-propanol</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td>Phenol</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td>Unknown</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/71/Table_1._Identifying_unknown_alcohol.xlsx" target="_blank">Click Here to download Table 1</a></div>
		</li>
		<li data-sub-note-item="1-17">
		<div class="lab-step">The next tests don&#39;t work with phenols, so you&#39;ll only test aliphatic alcohols for the rest of the lab. If your unknown is a phenol derivative, skip the instructions for the unknown and test only the three known aliphatic alcohols.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="2" data-parent-collapse="">The Jones Test for Aliphatic Primary and Secondary Alcohols<button class="expand">Expand</button>
	<p>In this section, you&#39;ll perform the Jones test for primary and secondary alcohols. Jones&#39; reagent is made with chromium trioxide and sulfuric acid in water, which forms chromic acid (H<sub>2</sub>CrO<sub>4</sub>)<em> in situ</em>. This powerful reagent oxidizes secondary alcohols to ketones, primary alcohols to aldehydes, which after forming an aldehyde hydrate, are further reduced to carboxylic acids.</p>
	<p>The oxidation state of chromium is the key to this test. Chromium is in the +6 oxidation state in the Jones&#39; reagent. The Cr(VI) complexes in the reagent give it its bright reddish, orange color.</p>
	<p>When Cr(VI) oxidizes an alcohol, chromium is reduced to the +3 oxidation state. First, the alcohol and chromic acid form a chromate ester. Then, a base (H<sub>2</sub>O) cleaves the C-H bond of the alcohol, forming the carbonyl group while reducing Cr(VI) to Cr(IV). Because the carbon of the alcohol undergoes a 2-electron oxidation, and Cr(VI) a 2-electron reduction, this step is a reduction-oxidation step. Cr(IV) participates in further oxidation steps and is eventually reduced to Cr(III). Cr(III) is often present as hexaaquachromium(III) ions&#160;&#8212; [Cr(H<sub>2</sub>O)<sub>6</sub>]<sup>3+</sup> &#8212; and Cr(III) complexes, where H<sub>2</sub>O molecules are replaced by one or more sulphate ions, [Cr(H<sub>2</sub>O)<sub>5</sub>(SO<sub>4</sub>)]<sup>+</sup>. These complexes give Cr(III) the characteristic green color. So, when you mix Jones&#39; reagent with a primary or secondary alcohol in acetone, the orange solution will turn green.</p>
	<p>Jones oxidation of alcohols doesn&#39;t work with tertiary alcohols because the -OH group is already bonded to three carbon atoms and cannot form an extra C-O bond. Thus, you won&#39;t see a color change if you combine Jones&#39; reagent with a tertiary alcohol because chromium isn&#39;t reduced.</p>
	<ul class="lab-items">
		<li data-sub-note-item="2-5">
		<div class="lab-step">Label four clean test tubes &#8216;1-butanol&#8217;, &#8216;2-butanol&#8217;, &#8216;2-methyl-2-propanol&#8217;, and &#8216;unknown&#8217; and place 10 drops of acetone in each. Acetone is the preferred solvent for Jones oxidation.</div>
		</li>
		<li data-sub-note-item="2-6">
		<div class="lab-step">Then, use clean pipettes to add 3 &#8211; 4 drops of the known aliphatic alcohols and your unknown alcohol to the corresponding tubes.</div>
		</li>
		<li data-sub-note-item="2-7">
		<div class="lab-step">Stir each solution well with the glass rod and rinse the rod with water after mixing each one.</div>
		</li>
		<li data-sub-note-item="2-8">
		<div class="lab-step">Now, obtain the bottle of Jones&#39; reagent and carefully add 2 &#8211; 3 drops to each tube. The reagent is strongly acidic and corrosive, so be careful with it and tightly cap the bottle when you&#39;re done. Then, mix each solution well, cleaning the glass rod after each one.</div>
		</li>
		<li data-sub-note-item="2-9">
		<div class="lab-step">Let the solutions react for 10 min, and then compare your unknown to the knowns. <strong>Note:</strong> If the unknown solution turned green, like 1-butanol and 2-butanol, the test is positive for a primary or secondary alcohol. If it stayed orange, like 2-methyl-2-propanol, the test is negative.</div>
		</li>
		<li data-sub-note-item="2-10">
		<div class="lab-step">Record the results in your lab notebook.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="3" data-parent-collapse="">The Lucas Test for Classifying Small Saturated Alcohols<button class="expand">Expand</button>
	<p>The Jones test doesn&#39;t distinguish between primary and secondary alcohols, so you&#39;ll use the Lucas test to identify which is which.</p>
	<p>Lucas&#39; reagent, which is a mixture of zinc chloride and hydrochloric acid, converts secondary and tertiary alcohols to chloroalkanes at room temperature. Chloroalkanes are nearly insoluble in water, so a positive result appears as the mixture separates into a cloudy chloroalkane-containing layer over a clear layer.</p>
	<p>The rate-determining step of the reaction involves converting the alcohol to a carbocation, so the speed of the reaction depends on how stable the carbocation is.</p>
	<p>Tertiary carbocations are very stable, so tertiary alcohols give a positive reaction almost immediately. Secondary carbocations are less stable, so secondary alcohols give a positive result after a few seconds to a few minutes. Primary carbocations are too unstable for this reaction, so primary alcohols give a negative result.</p>
	<ul class="lab-items">
		<li data-sub-note-item="3-5">
		<div class="lab-step">Now, label for clean test tubes as &#8216;1-butanol&#8217;, &#8216;2-butanol&#8217;, &#8216;2-methyl-2-propanol&#8217;, and &#8216;unknown&#8217;.</div>
		</li>
		<li data-sub-note-item="3-6">
		<div class="lab-step">Obtain the bottle of Lucas&#39; reagent and use a graduated cylinder to measure 2 mL of the reagent for each tube.</div>
		</li>
		<li data-sub-note-item="3-7">
		<div class="lab-step">Next, add 2 drops of 2-methyl-2-propanol to the appropriate tube. Immediately, stir the mixture for a few seconds and place it in the rack. The mixture will promptly separate into a clear lower layer and a cloudy upper layer.</div>
		</li>
		<li data-sub-note-item="3-8">
		<div class="lab-step">Thoroughly rinse the glass rod and record the immediate positive result in your lab notebook.</div>
		</li>
		<li data-sub-note-item="3-9">
		<div class="lab-step">Mix the remaining alcohols with Lucas&#39; reagent in the same way, using a fresh pipette for each alcohol and rinsing the glass rod each time. <strong>Note:</strong> Don&#39;t add too much alcohol or jostle the tubes because that can slow down the reaction.</div>
		</li>
		<li data-sub-note-item="3-10">
		<div class="lab-step">Watch carefully after mixing the unknown alcohol with Lucas&#39; reagent to ensure that you can distinguish an immediate positive result from a positive result after a brief delay.</div>
		</li>
		<li data-sub-note-item="3-11">
		<div class="lab-step">Check on the tubes every few minutes and record positive results as you see them. Note approximately how long it took for delayed positive results to appear.</div>
		</li>
		<li data-sub-note-item="3-12">
		<div class="lab-step">Once the tubes have sat for at least 15 min, you can assume that the results are final. Record the results for 1-butanol, 2-butanol, and for your unknown if applicable.</div>
		</li>
		<li data-sub-note-item="3-13">
		<div class="lab-step">Now, let&#39;s clean up. Your instructor will collect the Cr(VI) solutions, so leave any tubes of orange solution from the Jones test in your hood.</div>
		</li>
		<li data-sub-note-item="3-14">
		<div class="lab-step">Empty the other test tubes into the waste beaker and rinse them with deionized water. Pour the waste into the aqueous metal waste container using a funnel and rinse the beaker with deionized water.</div>
		</li>
		<li data-sub-note-item="3-15">
		<div class="lab-step">Now, wash your glassware as usual and dispose of used pipettes in the glass waste. Lastly, clean your hood and throw out any trash in the lab trash container.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="4" data-parent-collapse="">Results<button class="expand">Expand</button>
	<p>Identify your unknown alcohol. The four possibilities are 1-propanol, 2-propanol, 2-methyl-2-butanol, and para-chlorophenol.</p>
	<ul class="lab-items">
		<li data-sub-note-item="4-2">
		<div class="lab-step">Consider the results of the ferric chloride test first. If the mixture with your unknown alcohol turned purple, like phenol did, your alcohol must be para-chlorophenol. If you saw a negative result, your unknown is one of the three aliphatic alcohols.</div>
		</li>
		<li data-sub-note-item="4-3">
		<div class="lab-step">Look at the results of the Jones test. If the mixture with the unknown alcohol turned green, the unknown could be primary or secondary. If the mixture with your unknown alcohol stayed orange, your unknown alcohol is tertiary. Therefore, a negative Jones result means that your alcohol must be 2-methyl-2-butanol.</div>
		</li>
		<li data-sub-note-item="4-4">
		<div class="lab-step">Lastly, look at the results of the Lucas test. If you had a negative result in the Jones test, you should also have seen an immediate positive result in the Lucas test. This confirms that your alcohol was tertiary. If your unknown had a positive result after a short delay, then your unknown alcohol is secondary, and therefore, must be 2-propanol. Finally, if your unknown had a negative result in the Lucas test, your alcohol is primary, and therefore, must be 1-propanol.</div>
		</li>
	</ul>
	</li>
</ol>

Identifying Alcohols: Ferric Chloride Test, Jones Test, and Lucas Test - Procedure

鉴定醇类

Source: Lara Al Hariri and Ahmed Basabrain at the University of Massachusetts Amherst, MA, USA

	Ferric Chloride Test for PhenolsExpand
	In this lab, you ...

Beer's Law

Beer-Lambert Law and Equilibrium Constant Determination - Procedure

比尔定律

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Lab Setup for Beer&#8217;s LawExpand
	In this lab, you will combine aqueous solutions of FeCl3 ...

Concentration Dependence

<p>Source: Smaa Koraym at Johns Hopkins University, MD, USA</p>
<ol class="note-items">
	<li data-note-item="1" data-parent-collapse="">Concentration Dependence<button class="expand">Expand</button>
	<p>In this experiment, you will combine varying concentrations of aqueous HCl and sodium thiosulfate to make solid sulfur, which rapidly gathers into opaque yellow particles at a certain sulfur concentration. Since the reaction solution starts clear and colorless, you can easily tell when it reaches that concentration.</p>
	<p>You&#39;ll use the same test tube and total volume each time, so it will take the same amount of sulfur to make each solution completely opaque. Thus, you&#39;ll measure the reaction progress by timing how long that takes. You&#39;ll then use that data to estimate the reaction orders of the individual reactants and of the overall reaction.</p>
	<p>Before starting the lab, make a table listing the reactant concentrations, the time to solution opacity, and the solution temperature for the trials.</p>
	<h4><strong>Table 1: Reaction progress</strong></h4>
	<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
		<tbody>
			<tr>
				<td><strong>Trial</strong></td>
				<td><strong>[Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub>] (M)</strong></td>
				<td><strong>[HCl] (M)</strong></td>
				<td><strong>Time (s)</strong></td>
				<td><strong>Temp (&#176;C)</strong></td>
			</tr>
			<tr>
				<td style="text-align: center;">1</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">2</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">3</td>
				<td style="text-align: center;">0.2 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">4</td>
				<td style="text-align: center;">0.15 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">5</td>
				<td style="text-align: center;">0.05 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">6</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">6.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">7</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">4.5 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">8</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">1.5 M</td>
				<td></td>
				<td></td>
			</tr>
		</tbody>
	</table>
	<p><a href="https://www.jove.com/CDNSource/lm/labs/50/Table_1._Reaction_progress.xlsx" target="_blank">Click Here to download Table 1</a></p>
	<p>We want to make sure that the reactions are all taking place at room temperature. You&#39;ll perform two benchmark trials, three trials with different sodium thiosulfate concentrations, and three trials with different HCl concentrations. You will vary the concentrations by diluting stock solutions of sodium thiosulfate and HCl, as shown in the following tables.</p>
	<h4><strong>Table 2: Sodium thiosulfate dilutions</strong></h4>
	<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
		<tbody>
			<tr>
				<td style="text-align: center;"><strong>Target Concentration</strong></td>
				<td style="text-align: center;"><strong>Volume of 0.2 M sodium thiosulfate</strong></td>
				<td style="text-align: center;"><strong>Volume of DI water</strong></td>
			</tr>
			<tr>
				<td style="text-align: center;">0.05 M</td>
				<td style="text-align: center;">5 mL</td>
				<td style="text-align: center;">15 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">0.10 M</td>
				<td style="text-align: center;">10 mL</td>
				<td style="text-align: center;">10 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">0.15 M</td>
				<td style="text-align: center;">15 mL</td>
				<td style="text-align: center;">5 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">0.20 M</td>
				<td style="text-align: center;">20 mL</td>
				<td style="text-align: center;">0 mL</td>
			</tr>
		</tbody>
	</table>
	<p><a href="https://www.jove.com/CDNSource/lm/labs/50/Table_2._Sodium_thiosulfate_dilutions.xlsx" target="_blank">Click Here to download Table 2</a></p>
	<h4><strong>Table 3: HCl Dilutions</strong></h4>
	<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
		<tbody>
			<tr>
				<td style="text-align: center;"><strong>Target Concentration</strong></td>
				<td style="text-align: center;"><strong>Volume of 6.0 M HCl</strong></td>
				<td style="text-align: center;"><strong>Volume of DI water</strong></td>
			</tr>
			<tr>
				<td style="text-align: center;">1.5 M</td>
				<td style="text-align: center;">2.5 mL</td>
				<td style="text-align: center;">7.5 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">3.0 M</td>
				<td style="text-align: center;">5.0 mL</td>
				<td style="text-align: center;">5.0 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">4.5 M</td>
				<td style="text-align: center;">7.5 mL</td>
				<td style="text-align: center;">2.5 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">6.0 M</td>
				<td style="text-align: center;">10 mL</td>
				<td style="text-align: center;">0 mL</td>
			</tr>
		</tbody>
	</table>
	<p><a href="https://www.jove.com/CDNSource/lm/labs/50/Table_3._HCl_Dilutions.xlsx" target="_blank">Click Here to download Table 3</a></p>
	<p>Remember to use caution when handling HCl, which is toxic and highly corrosive. Sulfur dioxide, which is a gaseous product of this reaction, is also toxic. You will leave the reaction waste in the fume hood overnight to let the sulfur dioxide escape harmlessly.</p>
	<ul class="lab-items">
		<li data-sub-note-item="1-6">
		<div class="lab-step">First, put on a lab coat, splash-proof safety glasses, and nitrile gloves.</div>
		</li>
		<li data-sub-note-item="1-7">
		<div class="lab-step">Fill a plastic wash bottle with deionized water and get a test tube marked with an X.</div>
		</li>
		<li data-sub-note-item="1-8">
		<div class="lab-step">Clamp the test tube over the center of a small stir plate. The label must be on the opposite side from you. Make sure that you can clearly see the X. Place a small magnetic stir bar in the test tube.</div>
		</li>
		<li data-sub-note-item="1-9">
		<div class="lab-step">Use a thermometer clamp to secure a glass thermometer in the lower third of the tube, keeping it clear of the X and the stir bar.</div>
		</li>
		<li data-sub-note-item="1-10">
		<div class="lab-step">Cut a sheet of about 20 squares of plastic paraffin film from a roll and bring the sheet back to your hood.</div>
		</li>
		<li data-sub-note-item="1-11">
		<div class="lab-step">Lay paper towels in the fume hood as a clean surface for labware to be reused.</div>
		</li>
		<li data-sub-note-item="1-12">
		<div class="lab-step">Label a 600-mL beaker as &#8216;waste&#8217; for the reaction, a 100-mL beaker as &#8216;0.2 M sodium thiosulfate&#8217;, and a 50-mL beaker as &#8216;6 M HCl&#8217;.</div>
		</li>
		<li data-sub-note-item="1-13">
		<div class="lab-step">Fill the 100-mL beaker with 0.2 M sodium thiosulfate from the stock bottle in the dispensing hood.</div>
		</li>
		<li data-sub-note-item="1-14">
		<div class="lab-step">After that, bring the 50-mL beaker and a watch glass to the acid-dispensing hood to obtain 50 mL of 6 M HCl. Cover the filled beaker with the watch glass and bring your portion of HCl back to your hood.</div>
		</li>
		<li data-sub-note-item="1-15">
		<div class="lab-step">Prepare 20 mL of 0.1 M sodium thiosulfate for the first benchmark trial. Use a 10-mL volumetric pipette to measure 10 mL of 0.2 M sodium thiosulfate and dispense it into a 20-mL volumetric flask. Fill the 20-mL volumetric flask with deionized water to the mark.</div>
		</li>
		<li data-sub-note-item="1-16">
		<div class="lab-step">Then, cut a square of plastic paraffin film, seal the flask, and invert it several times to thoroughly mix the solution.</div>
		</li>
		<li data-sub-note-item="1-17">
		<div class="lab-step">Remove the film and pour the solution into the test tube.</div>
		</li>
		<li data-sub-note-item="1-18">
		<div class="lab-step">Prepare 10 mL of 3 M HCl. Pipette 5 mL of 6 M HCl into a 10-mL graduated cylinder. Add deionized water to fill the graduated cylinder to the 10-mL line.</div>
		</li>
		<li data-sub-note-item="1-19">
		<div class="lab-step">Seal the top of the graduated cylinder with plastic paraffin film and thoroughly mix the HCl solution by inverting it several times.</div>
		</li>
		<li data-sub-note-item="1-20">
		<div class="lab-step">Now, start the stir motor and get a reset stopwatch. Confirm that you can see the X through the solution in the test tube.</div>
		</li>
		<li data-sub-note-item="1-21">
		<div class="lab-step">Simultaneously start the stopwatch and pour the 3 M HCl into the test tube.</div>
		</li>
		<li data-sub-note-item="1-22">
		<div class="lab-step">Watch the X through the solution, which will start becoming cloudy when enough sulfur has been produced to saturate it. Stop the stopwatch exactly when the solution becomes so opaque that the X disappears.</div>
		</li>
		<li data-sub-note-item="1-23">
		<div class="lab-step">Record the time in your lab notebook for benchmark trial 1 and then reset the stopwatch. Also, record the temperature of the solution.</div>
		</li>
		<li data-sub-note-item="1-24">
		<div class="lab-step">Now, turn off the stir motor, remove the thermometer, and rinse it with deionized water into the waste beaker.</div>
		</li>
		<li data-sub-note-item="1-25">
		<div class="lab-step">Then, empty the test tube into the waste beaker, retrieve the stir bar with long forceps, and rinse the test tube and stir bar with deionized water.</div>
		</li>
		<li data-sub-note-item="1-26">
		<div class="lab-step">Thoroughly clean the test tube with a test tube brush. Briefly rinse the volumetric flask and graduated cylinder with deionized water as well. Dry everything with paper towels.</div>
		</li>
		<li data-sub-note-item="1-27">
		<div class="lab-step">Repeat the trial in the exact same way for the second benchmark time. If the time is not within 3 - 5 s of the first trial, repeat the benchmark trial until you have two consistent trials.</div>
		</li>
		<li data-sub-note-item="1-28">
		<div class="lab-step">Follow the same overall procedure for each subsequent trial, changing the dilutions as indicated in your table and cleaning your glassware between each trial. Use a 5-mL volumetric pipette as needed when measuring the sodium thiosulfate stock solution in trials four and five.</div>
		</li>
		<li data-sub-note-item="1-29">
		<div class="lab-step">Once you have performed all eight trials, rinse your glassware and tools one last time and neutralize the reaction waste with baking soda. Use caution because sulfur dioxide is one of the reaction products.</div>
		</li>
		<li data-sub-note-item="1-30">
		<div class="lab-step">Transfer the neutralized reaction waste to the designated waste container. Then, pour any remaining sodium thiosulfate solution into its labeled waste container and rinse the beaker with deionized water.</div>
		</li>
		<li data-sub-note-item="1-31">
		<div class="lab-step">Neutralize any remaining HCl with baking soda before flushing it down the drain with tap water.</div>
		</li>
		<li data-sub-note-item="1-32">
		<div class="lab-step">Finally, clean and put away your labware according to your standard practices and throw out any trash remaining in your hood. Your instructor will dispose of the reaction waste later.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="2" data-parent-collapse="">Results<button class="expand">Expand</button>
	<ul class="lab-items">
		<li data-sub-note-item="2-1">
		<div class="lab-step">Now, estimate the reaction order of sodium thiosulfate and HCl. Calculate the starting concentration of sodium thiosulfate in the reaction mixture for trials 1 through 5. Looking at the concentration of sodium thiosulfate and the reaction times, we see that as the concentration doubles, the time to opacity is halved.
		<h4><strong>Table 4: Estimating reaction order sodium thiosulfate</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td style="text-align: center;"><strong>Trial</strong></td>
					<td style="text-align: center;"><strong>[Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub>] added</strong></td>
					<td style="text-align: center;"><strong>Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub> volume (mL)</strong></td>
					<td style="text-align: center;"><strong>Total volume (mL)</strong></td>
					<td style="text-align: center;"><strong>[Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub>] in mixture </strong></td>
					<td style="text-align: center;"><strong>Time (s)</strong></td>
					<td style="text-align: center;"><strong>Inverse time (s<sup>-1</sup>)</strong></td>
				</tr>
				<tr>
					<td style="text-align: center;">1, 2</td>
					<td style="text-align: center;">0.1</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">3</td>
					<td style="text-align: center;">0.2</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">4</td>
					<td style="text-align: center;">0.15</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">5</td>
					<td style="text-align: center;">0.05</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/50/Table_4._Estimating_reaction_order_sodium_thiosulfate.xlsx" target="_blank">Click Here to download Table 4</a></div>
		</li>
		<li data-sub-note-item="2-2">
		<div class="lab-step">Remember that each trial used the same volume, so it took the same amount of sulfur to make each solution opaque. Thus, the reaction is twice as fast when the sodium thiosulfate concentration is doubled.</div>
		</li>
		<li data-sub-note-item="2-3">
		<div class="lab-step">When the concentration increases by a factor of 4, the reaction rate also increases by a factor of 4. This one-to-one relationship suggests that the reaction was first order for sodium thiosulfate. If so, we would expect a plot of rate versus sodium thiosulfate concentration to be linear.</div>
		</li>
		<li data-sub-note-item="2-4">
		<div class="lab-step">We didn&#39;t measure how much sulfur it took to turn the solution opaque, but we assume that it was the same for each trial. This lets us use the inverse of time to opacity as a stand-in for the rate. The slope won&#39;t be equal to k, but that&#39;s OK for this lab.</div>
		</li>
		<li data-sub-note-item="2-5">
		<div class="lab-step">Plot inverse reaction time as a function of sodium thiosulfate concentration. This confirms the linear relationship between sulfur production and thiosulfate concentration. Thus, the reaction seems to be first order with respect to thiosulfate.</div>
		</li>
		<li data-sub-note-item="2-6">
		<div class="lab-step">Use the same method to estimate the reaction order of HCl. First, calculate the starting concentration of HCl in the benchmark trials and in trials 6 through 8.
		<h4><strong>Table 5: Estimating reaction order HCl</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td style="text-align: center;"><strong>Trial</strong></td>
					<td style="text-align: center;"><strong>[HCl] added</strong></td>
					<td style="text-align: center;"><strong>HCl volume (mL) </strong></td>
					<td style="text-align: center;"><strong>Total volume (mL) </strong></td>
					<td style="text-align: center;"><strong>[HCl] in mixture </strong></td>
					<td style="text-align: center;"><strong>Time (s)</strong></td>
				</tr>
				<tr>
					<td style="text-align: center;">1, 2</td>
					<td style="text-align: center;">0.1</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">3</td>
					<td style="text-align: center;">0.2</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">4</td>
					<td style="text-align: center;">0.15</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">5</td>
					<td style="text-align: center;">0.05</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
			</tbody>
		</table>
		<a href="https://www.jove.com/CDNSource/lm/labs/50/Table_5._Estimating_reaction_order_HCl.xlsx" target="_blank">Click Here to download Table 5</a></div>
		</li>
		<li data-sub-note-item="2-7">
		<div class="lab-step">Then, look at the concentration of HCl and the reaction times for these trials. The reaction times are nearly identical, so the HCl concentration has no effect on the reaction rate. This means that HCl seems to be zeroth order for this reaction.</div>
		</li>
		<li data-sub-note-item="2-8">
		<div class="lab-step">Lastly, add up the reaction orders of the reactants to get the overall reaction order.</div>
		</li>
	</ul>
	</li>
</ol>

Concentration Dependence and Reaction Order - Procedure

浓度依赖性

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Concentration DependenceExpand
	In this experiment, you will combine varying concentrations of ...

Optimal Foraging

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Simulating Foraging with Artificial Habitats and Prey
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: The foragers will hunt for prey represented by pinto beans in four buckets of rice with varying prey densities. Without knowing what these densities are, foragers must obtain as many prey items as possible in as little time as possible. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">HYPOTHESES: In this experiment, the experimental hypothesis could be that foragers will catch the most prey in the higher prey density bucket and also spend the most time foraging there.  The null hypothesis would then be that foragers will catch an equal number of prey in each bucket and that foragers will spend an equal amount of time foraging in each patch. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">To begin the foraging activity, record the names and role of each participant at the top of the student data collection sheet.  NOTE: Before starting the experiment, the forager is allowed to become familiar with the foraging process &#8211; the following steps are a practice round. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">The forager should kneel or sit in front of the average density bucket. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Once the timer says start, the forager may begin looking for the pinto beans representing the prey. The forager can spend as much time as they like foraging in this bucket. 
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Once a prey item is located, the forager must signal that one has been found and place the prey in the cup next to the bucket.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Once they believe they have acquired most of the prey in the patch, they should tell the timer to stop the time and the practice round is over. 
</div></li><li data-sub-note-item="1-8"><div class="lab-step">To begin the simulation proper, the forager should sit or kneel in front of bucket A. 
</div></li><li data-sub-note-item="1-9"><div class="lab-step">The timer must be ready to start the stopwatch. 
</div></li><li data-sub-note-item="1-10"><div class="lab-step">The recorder should be ready to record the time each prey item is located, in addition to the time that the forager arrived at and left each bucket. 
</div></li><li data-sub-note-item="1-11"><div class="lab-step">When all parties are ready, the timer should start the stopwatch and say &#8220;start&#8221;,  and the forager should begin foraging. NOTE: The stopwatch will run through the rest of the round for buckets B and C.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">As the forager signals finding pinto beans and places them in the cup next to the bucket, the timer should tell the recorder the time.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">The recorder should then write the time in the student data collection sheet.  <a href="https://www.jove.com/CDNSource/lm/labs/34/Table_1_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Once the forager has decided to move on to the next bucket, they should tell the timer &#8220;done&#8221;, and begin moving to the next patch. 
</div></li><li data-sub-note-item="1-15"><div class="lab-step">The recorder should record the time the forager left and the time they arrived at bucket B in the student data collection sheet.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Repeat the same procedure for buckets B and C. Once the forager has completed the activity, it is time for the next forager to begin using the same procedure. 
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Before performing any data analysis, review the data collection sheet and compile your individual data for captured prey, foraging time, and travel time for each bucket in your student calculations table. <a href="https://www.jove.com/CDNSource/lm/labs/34/Table_2_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-2"><div class="lab-step">After this, calculate your individual capture rate for each bucket by dividing the number of prey captured by the sum of the foraging time and travel time and record these values in your table. Individual capture rate =  Number of prey captured / (foraging time + travel time)
</div></li><li data-sub-note-item="2-3"><div class="lab-step">To calculate your Giving-Up-Time or a GUT for each bucket, subtract the time that the last prey item was acquired from the time you left the bucket.  GUT = time forager left bucket  -  time last prey item acquired
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Next, calculate the mean GUT for your foraging group and record the values in your table.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Finally, calculate your scaled GUT for each bucket by dividing the bucket GUT by your group&#39;s mean GUT. Scaled GUT =  Bucket GUT / Group mean GUT NOTE: The scaled GUT will allow class data to be pooled later on without differences in individual foragers skewing the data. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">The instructor should now compile the data into the classroom spreadsheet.  <a href="https://www.jove.com/CDNSource/lm/labs/34/Table_3_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Plot a bar graph of the average number of prey collected in each bucket. On the x-axis, A should represent the low prey density bucket, B should represent the medium prey density bucket, and C the high prey density bucket. Plot the y-axis as the number of prey items caught. 
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Next, plot the graph of the class average scaled GUT, where the x-axis represents the buckets with varying levels of prey density and the y-axis shows the values for the average scaled GUT. 
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Plot a third graph of the average time spent foraging in each bucket. 
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Now review the Marginal Value Theorem (MVT) from the concepts video and examine the three graphs that you generated from your class data. Take note of whether the graphs conform to the predictions of MVT. 
</div></li></ul></li></ol>

Optimal Foraging: Foraging with Artificial Habitats and Prey - Procedure

最佳觅食

Simulating Foraging with Artificial Habitats and Prey
ExpandNOTE: The foragers will hunt for prey represented by pinto beans in four buckets of rice with ...

生物学

行为

Group Behavior

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">The Hawk-Dove Game
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: In this activity, you will play the hawk and dove game with a single partner and then with multiple partners to observe hypothetical costs and benefits of the antagonist or cooperative behavior respectively. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Before the activity starts, review the cost-benefit table so that you understand how to score the game. <a href="https://www.jove.com/CDNSource/lm/labs/33/Table_1_Group_behavior.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-3"><div class="lab-step">HYPOTHESES: The experimental hypothesis for this exercise could be that the dove strategy will become more frequent between repeated partners, and the hawk strategy will become more frequent when interactions are with a variety of partners. The null hypothesis could be that there will be no change in strategy over time with repeat or different partner combinations. NOTE: Benefit can be determined by looking at the left column and choosing the row that corresponds to the card you played. The box that corresponds to the choice of your partner can be found in the top row. For the purposes of this game, B equals four and C equals three. So depending on the cards played, player one here, which is you, would gain a score of two, four, zero or one half. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Collect a set of two game cards. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Take out the cards labeled hawk and dove and place them face down on the table or conceal them in your hands. 
</div></li><li data-sub-note-item="1-6"><div class="lab-step">When the instructor gives the signal show either of the two cards to the student sitting across from you. Try to strategize how to receive the highest benefit from every interaction on your own but do not communicate with your partner. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">In the Single Partner Recording Table (Table 2) provided by your instructor, note the cards played as well as the benefit you received for that round.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Repeat showing cards to the same partner and determining benefit on your instructor&#39;s signal for a total of 15 rounds.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">At the end of those rounds, the student with the highest total benefit value was determined to be the &#8220;winner&#8221;, or the most fit.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">As a class, determine the percentages of hawks and doves played as well as the average benefit received for each round, using this formula: Class average benefit=(sum total benefit)/(number of players)
</div></li><li data-sub-note-item="1-11"><div class="lab-step">For the second game, and then for each round of play, one row of students should rotate to their right, leaving all players with a new partner.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Continue playing for 15 rounds or until students end up back in their starting positions, recording the data in the Multiple Partner Recording Table (Table 3) given to you by your instructor.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">For each round, determine the percentages of hawks and doves played that round, as well as the average benefit received.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Cheating and Cooperation Exercise
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">NOTE: In this activity, you will exchange benefits, represented by colored or similar items, with your classmates. In this simulation, a cheater is defined as a person who gives fewer benefits than they receive. During this activity, you will observe the frequency of cheating behavior over time. 
</div></li><li data-sub-note-item="2-2"><div class="lab-step">HYPOTHESES: The experimental hypothesis is that cheaters will receive fewer benefits over time and cooperators will continue to provide equal benefits to one another. The null hypothesis is that the frequency of cheaters and cooperators does not change over time. 
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Each person should collect beads of one color to represent a tangible benefit, as well as one paper bag and a three-ring binder.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Get into a group of three so that all members have objects of the same color.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Now find another group with a different color to pair with. In each round, partners will exchange benefits without knowing what they are receiving from their partner and without discussion within their group.  NOTE: Benefits of a different color from your starting color are worth twice as much.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Turn face to face with a member from the other group while still being able to conceal the objects in your possession.  TIP:<strong> </strong>Setting up a screen using a notebook or sitting behind a desk can be helpful here.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">When given a signal from the instructor, place zero to two benefits into the paper bag and pass it to your partner.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Simultaneously, receive the bag from your partner and then remove the benefits from the bag.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Make a note of how many benefits you gave away and how many you received in the Cheating and Cooperation Table (Table 4) provided by your instructor.
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Turn to a new member from the other group and repeat the exchange.
</div></li><li data-sub-note-item="2-11"><div class="lab-step">Rotate through all of the members of the other group for as many rounds as the instructor determines - which will not be revealed until the game ends so as not to alter player behavior.
</div></li><li data-sub-note-item="2-12"><div class="lab-step">Once the game has ended, note for each round in the cheating and cooperation table whether you gave more than your partner, received more from them or if you gave the same amount.
</div></li><li data-sub-note-item="2-13"><div class="lab-step">Now total up all of the benefits in your possession, with benefits you&#39;ve received from the other group being worth twice as much.
</div></li><li data-sub-note-item="2-14"><div class="lab-step">For each round, the whole class should total up the number of cheaters - with cheaters defined as those who gave less than they received.
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">For both the single partner hawk-dove game and the multiple partners hawk-dove game, use the whole class data to plot the percentages as two separate lines - one for the percentage of hawks, and one for the percentage of doves, for each of the 15 rounds.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Take note of whether the cards played changed as more rounds were played.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Manipulate the values for B and C to see if you can find the point at which values of B and C would render the hawk strategy no longer effective (this would be the point when there is no benefit to choosing the hawk strategy over always choosing the dove strategy).
</div></li><li data-sub-note-item="3-4"><div class="lab-step">As a class, use the data from the cheating and cooperation activity to make a graph showing the percentage of rounds each individual player cheated versus the amount of benefits they ended with.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">Consider whether it is better to be a cheater or a cooperator in this scenario and discuss as a class what makes this scenario different from the hawk-dove game.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Now, use the class data to graph the percentage of cheaters against the number of rounds, and look for any trends over time.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Consider which type of strategy would most likely evolve in a setting where partners interact repeatedly.
</div></li><li data-sub-note-item="3-8"><div class="lab-step">Then, note which tactic might be beneficial for a species that relies on cooperation. 
</div></li><li data-sub-note-item="3-9"><div class="lab-step">Discuss as a class what would likely happen if you increased or decreased the relative value of the benefits you receive.
</div></li></ul></li></ol>

Group Behavior: Hawk-Dove Game and Trading Exercise - Procedure

组行为

The Hawk-Dove Game
ExpandNOTE: In this activity, you will play the hawk and dove game with a single partner and then with multiple partners to observe ...

Hardy-Weinberg and Genetic Drift

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Class Simulation
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Begin by opening a new spreadsheet file. Following the Hardy-Weinberg equation where p is the frequency of a dominant allele A in a population, and q is defined as the frequency of a recessive allele B, input frequency p of allele A into cell B2, and frequency q of allele B into cell B3.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Assign the value 0.5 to cell C2.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Following the 1 &#8211; p = q equation, enter the formula &#8220;= 1 &#8211; C2&#8221; into cell C3 to calculate the frequency q of allele B. NOTE: Cells C2 and C3 will represent the gene pool used in the next few steps.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Label cells E2 and F2 &#8220;Allele 1&#8221; and &#8220;Allele 2&#8221; respectively, then enter the RAND code for random formula into cell E3. =IF (RAND()</div></li><li data-sub-note-item="1-5"><div class="lab-step">Select cell E3 and drag the bottom right corner of the cell down to E27 to duplicate the formula into 25 cells, creating an allele for the other offspring, and enter the same formula that was used in cell E3 into cell F3.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Add a third column of data starting with the description &#8220;Genotype&#8221; in cell G2, and add the CONCATENATE function to cell G3 to combine the two randomly generated alleles and to create a genotype.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Drag this formula down for 25 cells and label cells H2, I2, and J2 AA, AB, and BB respectively.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Then, input one IF function as shown here into cells H3, I3, and J3. Drag the formulas down for 25 rows per column. The formulas will return a 1 if the genotype in this row matches the genotype in the header row, and a 0 if the genotype in this row is one of the other two genotypes. H3: = IF (G3=&#8221;AA&#8221;,1,0) I3: =IF(OR(G3=&#8221;AB,G3=&#8221;BA&#8221;),1,0) J3: =IF(G3=&#8221;BB&#8221;,1,0)
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Then, label cell D28 as &#8220;SUM&#8221;, add the formula to cell H28, and drag the formula to cells I28 and J28 to get the total number of each genotype.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Next, label cells H30 and J30 &#8220;A&#8221; and &#8220;B&#8221; respectively and label cell D31 &#8220;Number of alleles&#8221;.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Add code to cells H31 and J31 to obtain the total number of alleles in the simulated generation, which is two times the frequency of the respective homozygous genotype, plus the frequency of the heterozygous genotype.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Then, label cell E32 &#8220;Next gen allele frequency&#8221; and add code to cells H32 and J32 to obtain the ratio of alleles in the next generation.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Using the gene frequencies generated in the mathematical model you just built, adjust the gene pool values in cells C2 and C3 to those from H32 and J32, and run 10 more generations, updating the gene pool with the resulting allele frequency each time.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Record the ratio of the two variables at each time point in the spreadsheet on the table, and create a line graph to see how a small population changes over time. Hypotheses: The experimental hypothesis in this study is that smaller populations will deviate more from the Hardy-Weinberg expected frequencies of the alleles than will larger populations, because smaller populations are more susceptible to genetic drift. The null hypothesis is that the allele frequencies within the populations will not differ from the Hardy-Weinberg equilibrium equation expected frequencies, meaning that the allele frequencies will be the same from generation to generation.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Set the frequency of gene A to 0.3 and gene B to 0.7, and run the model 10 more times, recording the ratio of the genes in the next generation in the table after each run.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Then, drag the formulas for the cells further down to alter the model to include 100 zygotes and run the model another 10 times.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">After the last run, save all of the working data to a personal storage device and exit the spreadsheet program.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Simulation for Hardy-Weinberg and Genetic Drift
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">To begin, find a partner and then collect one bag from the instructor.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Verify that the bag contains beads of two different colors and an even number of each color. 
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Designate one color as allele capital A and the other as small a. Hypotheses: The experimental hypothesis for this simulation is that allele frequencies will not change over the 10 generations of the experiment, and Hardy-Weinberg equilibrium will be observed. The null hypothesis is that equilibrium will not be seen in the population.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Note the initial frequency in Table 1 next to generation zero. Using the Hardy-Weinberg equation, calculate the initial genotype frequencies of the population and note this in Table 1. <a href="https://www.jove.com/CDNSource/lm/labs/4/Lab_4_Table_A.xlsx" target="__blank" style="display:block;margin:20px;">Click Here to download Table A</a>
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Then, discuss with your partner about the expected final allele and genotype frequencies after 10 generations of Hardy-Weinberg equilibrium. Note this next to prediction in Table 1.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Draw a pair of beads from the bag. This represents the genotype of one individual in the next generation.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Place a tally mark in the appropriate column next to Generation 1.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Now, keeping each pair of beads out of the bag every time, repeat the drawing 20 times to fill out the generation one row of Table 1.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Using the tallies, calculate the allele frequency for that generation, remembering to count both alleles in each genotype. Make a note of the new allele frequency, and then adjust the 100 beads to reflect the population after Generation 1 by adding and removing beads as necessary.
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Repeat the drawing of pairs from this adjusted population for another generation of 20 picks, recording all of the observations in Table 1.
</div></li><li data-sub-note-item="2-11"><div class="lab-step">After calculating the allele frequency for this generation, adjust the population again to set up a third generation draw.
</div></li><li data-sub-note-item="2-12"><div class="lab-step">Keep drawing, calculating allele frequencies, and adjusting the starting population until 10 generations have been recorded in total.
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Violations of Hardy-Weinberg 
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">To test the effect of different physical and ecological scenarios on the Hardy-Weinberg equilibrium, first draw a slip of paper to determine which Hardy-Weinberg assumption you will be testing.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Make a prediction of what you think might happen in your selected scenario before beginning the experiment, and record this on the board.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">If you selected the mutation scenario, select 5 alleles at random from the set and replace them with 5 of a third color, allele capital B.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">As before, perform the simulation by pulling pairs of beads from the bag for a generation of 20 picks, recording the results.  <a href="https://www.jove.com/CDNSource/lm/labs/4/Lab_4_Table_B.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table B</a>
</div></li><li data-sub-note-item="3-5"><div class="lab-step">After each generation, make adjustments to have the starting population match the new allele frequency as before.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Then, replace 5 random alleles again with the new color, and simulate the new generation for 20 picks.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">If you picked the non-random mating test, draw 1 allele at a time instead of 2 and then pair it with another of the same color pulled from the bag.
</div></li><li data-sub-note-item="3-8"><div class="lab-step">As with the previous simulation, adjust the population to match the new allele frequencies at the end of the previous generation, and carry out the simulation for 10 generations in total.
</div></li><li data-sub-note-item="3-9"><div class="lab-step">For the gene flow condition, begin by removing 10 alleles from the population and replacing them with 10 randomly selected alleles from another set of 100 beads.
</div></li><li data-sub-note-item="3-10"><div class="lab-step">Adjust the allele frequency and repeat the gene flow of removing 10 beads and adding 10 beads from another bag at the beginning of each generation.
</div></li><li data-sub-note-item="3-11"><div class="lab-step">If you drew small population size, simply start each generation with 60 alleles instead of 100.
</div></li><li data-sub-note-item="3-12"><div class="lab-step">As usual, adjust allele frequencies each generation and record 10 generations. In the selection condition, draw from the original bag of beads but do not count any homozygous recessive pairs that are drawn when calculating the allele frequency at the end of each generation.
</div></li></ul></li><li data-note-item="4" data-parent-collapse="">Simulation of Genetic Drift
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="4-1"><div class="lab-step">Make your predictions before running the simulations and record them on the board.
</div></li><li data-sub-note-item="4-2"><div class="lab-step">If you have the small population size test, run the standard Hardy-Weinberg simulation as before, but instead start each generation with 30 alleles and not 100.
</div></li><li data-sub-note-item="4-3"><div class="lab-step">If you drew the founder effect with two alleles test, start generation 1 by drawing only 5 pairs of beads from the bag.
</div></li><li data-sub-note-item="4-4"><div class="lab-step">Then, creating the gene pool for generation 2, include only 50 beads at the allele frequency determined in generation 1. When you create the gene pool for generation 3 and all subsequent generations, include 100 beads.
</div></li><li data-sub-note-item="4-5"><div class="lab-step">For a founder effect with 10 alleles, you will need to collect a bag containing random amounts of 10 different colored beads.
</div></li><li data-sub-note-item="4-6"><div class="lab-step">Designate an allele name for each of the new alleles, and then calculate their initial allele frequency.
</div></li><li data-sub-note-item="4-7"><div class="lab-step">Now, run the experiment in the same way as the founder effect with two alleles, by drawing just 5 pairs randomly for generation 1 and then creating the second generation with 50 alleles, and third and subsequent generations with 100. <a href="https://www.jove.com/CDNSource/lm/labs/4/Lab_4_Table_C.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table C</a>
</div></li><li data-sub-note-item="4-8"><div class="lab-step">If you have the natural disaster with 2 alleles, you will need to collect a paper plate from your instructor.
</div></li><li data-sub-note-item="4-9"><div class="lab-step">Draw a line down the middle of the plate. Before generation 1, pour out all of the beads from a standard 100 bead setup onto the plate, and mix them randomly, spreading them evenly.
</div></li><li data-sub-note-item="4-10"><div class="lab-step">Choose one side of the plate and take all of the beads from that side. You should draw from these to create generation 1.
</div></li><li data-sub-note-item="4-11"><div class="lab-step">For generation 2 and beyond, adjust the population and use a total of 100 beads.
</div></li><li data-sub-note-item="4-12"><div class="lab-step">Finally, if you selected the natural disaster with 10 alleles test, you will need to collect a bag containing 10 different colored beads.
</div></li><li data-sub-note-item="4-13"><div class="lab-step">Assign a name to each new allele, and then place them on the plate and select half. Draw from these 50 beads for generation 1, and then calculate the allele frequencies to make a population of 100 in each subsequent round.
</div></li></ul></li><li data-note-item="5" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="5-1"><div class="lab-step">Using the entered functions, calculate the number of each allele by multiplying the number of the homozygous genotypes by 2 and adding the number of the heterozygous genotypes.
</div></li><li data-sub-note-item="5-2"><div class="lab-step">The frequency can then be calculated by dividing the number of the allele in question by the total number of alleles. Enter the results into the table.
</div></li><li data-sub-note-item="5-3"><div class="lab-step">Next, use the Hardy-Weinberg equation to calculate the expected genotype frequency of the next generation, and compare the results of the simulation with the expected frequency, using the table as a guide.
</div></li><li data-sub-note-item="5-4"><div class="lab-step">Plot the changes of the population gene frequencies over time that you recorded in the table. Note any changes in allele frequencies over time and if any alleles decrease in frequency to the point that they disappear from the population. 
</div></li><li data-sub-note-item="5-5"><div class="lab-step">Plot the changes in the populations of the 25 and 100 zygotes with initial gene frequencies of 0.5 for each allele. Compare the results of the smaller population and the larger populations.  NOTE: The observed allele frequencies are expected to differ slightly from the Hardy-Weinberg expected values as a result of chance from the RAND function.
</div></li><li data-sub-note-item="5-6"><div class="lab-step">Using separate lines for each allele, graph the allele frequencies found for the original Hardy-Weinberg experiment over 10 generations.
</div></li><li data-sub-note-item="5-7"><div class="lab-step">Compare the results across the class, and see if your results agree.
</div></li><li data-sub-note-item="5-8"><div class="lab-step">Next, again using one line per allele, graph the results of your second experiment testing violations of the Hardy-Weinberg equilibrium, and share your finding with the class. Compare your actual results with your prediction. 
</div></li><li data-sub-note-item="5-9"><div class="lab-step">Finally, graph the results of your genetic drift simulation scenario in the same manner.
</div></li><li data-sub-note-item="5-10"><div class="lab-step">Again, present your results to the group and hypothesize why your results did or did not match your prediction. Compare your results to those of your classmates&#8217;. 
</div></li></ul></li></ol>

Hardy-Weinberg Equilibrium Principle and Genetic Drift - Procedure

Hardy-Weinberg 和遗传漂变

Class Simulation
ExpandBegin by opening a new spreadsheet file. Following the Hardy-Weinberg equation where p is the frequency of a dominant allele A in a ...

进化

Animal Behavior

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Making Choice Chambers
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Before beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the bottom of both bottles. One line should be 1 cm from the base of the bottle and the other should be 1.5 cm from the base of the bottle.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Use a razor blade to make a small cut in each bottle at the mark. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, insert the scissors and carefully cut along the line until the bottoms of the bottles are removed completely.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Fit one bottle bottom into the other.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Tape the bottles together to make a secure chamber.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Use the razor blade and scissors to poke a hole into the center of the chamber. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Take a piece of tape and fold the edge onto itself to make a tab and place the tape over the hole.  Note: The tab helps with easy removal and reattachment of the tape to the chamber.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Use the Sharpie to label one side of the chamber A and the other side B.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Upon receiving the colony of <em>Drosophila</em>, perform a count to make sure there are 40 living individuals in the vial.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Geotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">To perform a geotaxis assay, first attach a clean, empty bottle cap to each end of the choice chamber and turn the fly vial upside down onto its lid.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Open the tape flap in the center of the choice chamber.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Insert the funnel into the hole and tap all of the flies into the chamber. HYPOTHESES: The alternate hypothesis is that more flies will be moving against gravity, or up, regardless of the orientation of the choice chamber. Alternatively, if the flies are positively geotactic, then more flies will move down, or with gravity. The null hypothesis is that the flies will have no preference with regard to gravity and will move randomly within the chamber. 
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Once the <em>Drosophila</em> are in the chamber, close the tape flap, rotate the chamber so that it stands vertically with side A on the bottom, and start the timer.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Immediately, count the number of <em>Drosophila</em> that are moving up and the number that are moving down. Record these data for time point 0 in the table. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">After 30 seconds, rotate the chamber so that side B is on the bottom and count the number of <em>Drosophila</em> that are moving up or down. Record these data for time point 30 in the table.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">After 60 seconds, rotate the chamber so that side A is on the bottom again and record the number of moving flies for time point 60.  <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_1_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Hold the chamber over the fly vial and carefully open the cap to return all of the <em>Drosophila</em> back to their empty vial. 
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Phototaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">To perform a phototaxis analysis, first cover side A of the choice chamber with tin foil, taking care that the foil reaches to the exact center between the two sides. 
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Ensure the caps are secured on both ends of the chamber.  HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found in the light side of the choice chamber, if the flues are attracted to light, or on the dark side if they are repelled by light. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus. Therefore, equal numbers of flies will be found on either side of the choice chamber.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Open the tape flap in the center of the choice chamber, insert the funnel into the hole, and tap all 40 flies into the chamber as previously described.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Set the timer to sound an alarm at 10 minutes.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">When the alarm sounds, stop the timer, and count the number of flies in the open side B of the chamber.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Subtract that number from the total number of flies added to the choice chamber to calculate the number of flies in the covered side A.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Record these data in the table for time point 10.  <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_2_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="3-8"><div class="lab-step">Carefully, return all of the flies back to their empty vial.
</div></li></ul></li><li data-note-item="4" data-parent-collapse="">Chemotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="4-1"><div class="lab-step">HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found on the side of the chamber with the apple cider vinegar if the flies are attracted to the odor. Or, if the flies are repelled by the vinegar, then more of them will be found on the side of the chamber presenting the odorless water. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus and will move randomly in the chamber.  Use an individual disposable plastic pipette to dispense two drops of the apple cider vinegar onto one cotton ball for side A of the chamber. 
</div></li><li data-sub-note-item="4-2"><div class="lab-step">Use an individual disposable plastic pipette to dispense two drops of the distilled water onto a cotton ball for side B of the chamber. 
</div></li><li data-sub-note-item="4-3"><div class="lab-step">Fold two pieces of tape over themselves to create individual pieces of double-sided tape and use the tape to attach each cotton ball to the inside of the single bottle cap.
</div></li><li data-sub-note-item="4-4"><div class="lab-step">Screw the bottle caps with the cotton balls onto their corresponding sides of the chamber.
</div></li><li data-sub-note-item="4-5"><div class="lab-step">Transfer all of the flies into the chamber and set the timer to sound an alarm after 10 minutes. 
</div></li><li data-sub-note-item="4-6"><div class="lab-step">When the alarm sounds, stop the timer and record the number of flies in each side of the chamber. <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_3_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="4-7"><div class="lab-step">At the end of the final experiment, funnel the flies into a morgue tube containing 70% ethanol. 
</div></li><li data-sub-note-item="4-8"><div class="lab-step">Dismantle the choice chambers for recycling.  NOTE: Since all of the chemicals used in these experiments are lab safe, the liquids can be disposed of down the sink, the chambers rinsed, and the solids can be thrown away in the trash. 
</div></li></ul></li><li data-note-item="5" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="5-1"><div class="lab-step">Gather all of the data collected for the geotaxis, phototaxis, and chemotaxis experiments.
</div></li><li data-sub-note-item="5-2"><div class="lab-step">Plot these values as bar graphs for different conditions and different time points.
</div></li><li data-sub-note-item="5-3"><div class="lab-step">Use these data to draw inferences about the behavior of <em>drosophila melanogaster</em>. 
</div></li></ul></li></ol>

Animal Behavior: Studying Taxis Behavior of Drosophila - Procedure

动物行为

Making Choice Chambers
ExpandBefore beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the ...

Extinction

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Diversity and Extinction during the Paleogene Epoch
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Begin this procedure by reading the extinction reading supplement that has been printed out for you. <br /><strong>NOTE:</strong> Alternatively, you may download the reading supplement at the link below.&nbsp; <a href="https://www.jove.com/CDNSource/lm/labs/24/Lab_20_Reading Supplement.docx" style="display:block;margin:20px;" target="_blank">Click here to download the extinction reading supplement</a>
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Using the information contained in the extinction reading supplements pertaining to the taxa of interest and the Chicxulub impact event, make predictions for each taxon listed in Table 1. Consider whether diversity in each taxon increased, decreased, or stayed the same immediately following the Cretaceous-Paleogene boundary and later on in the Paleogene epoch. <a href="https://www.jove.com/CDNSource/lm/labs/24/Table_1_Extinction.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, fill out the reasons for each of your predictions in the Contributing Factors column. HYPOTHESES: The experimental hypothesis is that many of the different taxa will show changes in diversity after the Cretaceous-Paleogene event, and again at the end of the Paleogene, with some increasing in diversity, while others decrease. The null hypothesis is that there will be no changes in diversity between taxa following the Cretaceous-Paleogene event, or at the end of the Paleogene.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Gather diversity data by going to the Paleobiology Database: <a href="http://www.paleobiodb.org" target="_blank">www.paleobiodb.org</a>.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">In the center of the screen, click the yellow box labeled Download Data. Under the italicized heading, &#8220;What do you want to download?&#8221;, select Diversity over time on the left side and Comma-separated values on the right side.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Scroll down to the heading &#8220;Select by taxonomy&#8221;.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">In the first box labeled 'Taxon or taxa to include', type in the name of the taxon that data is being gathered on.  NOTE: Ensure the spelling is correct.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Now, go to the dropdown menu right below that box labeled &#8220;Taxonomic resolution&#8221;, and select genera.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Under the next heading, Select by time, type Maastrichtian into the first box and Chattian in the box directly below. Make sure the dropdown menu labeled Time rule is set to major and the Temporal resolution is set to stage.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Select &#8220;Assume extant taxa range through to present&#8221;. Scroll back up to the middle of the page and click download. A save window will open.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Save the .csv file to a safe and accessible place and rename it to make it easy to identify.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Open the file and scroll down to the main dataset under Records.  NOTE: The data are arranged in reverse time order by geological stage. The second column, interval_name, gives the accepted name of the stage in question. The next two columns give the appropriate dates of the stage in millions of years before the present. The final column, number of occurrences, gives a total count of the genera extant during that geological stage as determined from occurrence of fossils.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">To more easily work with this data, copy and paste each column into a new sheet. Be sure to label this sheet with the taxon in question, the data and time the data were obtained, and the data source.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Repeat this process for each of the taxa in Table 1 (steps 4 &#8211; 12). NOTE: Data from multiple taxa can be kept on the same sheet, so long as they are kept distinct and labeled appropriately.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">To create line plots for each of the taxa showing the change in diversity over time, select the max_ma column and the number of occurrences column simultaneously.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">In Excel, select Insert from the top toolbar and find the section labeled Charts. Select the bottom center icon, Insert Scatter Chart.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Then, select the Scatter with Straight Lines and Markers and a graph should appear. NOTE: Since the axis of this graph is in units of millions of years ago, the axis is in the reverse direction of time when put in numerical order.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">To fix this, click on the green plus sign in the top-right corner of the graph and hover over Axes. This should reveal a small black arrow. Click the arrow to open up a small menu and select More Options.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">This will open the Axis Options menu. Under Axis Options, click the box next to Values in reverse order. NOTE: It is also possible to change the axis scales from this menu, which can be used to eliminate the excess time that is not being analyzed in this lab. Keep any changes consistent between different graphs.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Double-click on the title at the top of the graph and change it to the taxon being represented.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Make a separate graph for each of the taxa in Table 1. Keep them organized and in one location. A separate sheet for graphs is recommended.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">For each graph, identify the location of the Cretaceous-Paleogene boundary and draw a vertical line through the graph at this point.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Using the information from the graphs, fill out Table 2. In some cases, it may be helpful to go back to the original dataset and compare actual values, particularly when they are small. <a href="https://www.jove.com/CDNSource/lm/labs/24/Table_2_Extinction.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Compare these values to the predictions made in Table 1 and discuss if the original contributing factors are still likely candidates.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Using the dataset, calculate the percentage of total taxa that went extinct over the Cretaceous-Paleogene boundary using this equation.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">There is an event in the middle of the Paleogene known as the Paleocene-Eocene Thermal Maximum about 55.5 million years ago. This represents a high point in temperature during the Paleogene epoch at approximately 8 &#176;C higher than today&#39;s average temperature. Does this point seem to have an effect on diversity for any of the taxa? If yes, then which ones?
</div></li></ul></li></ol>

Extinction: Diversity and Extinction during the Paleogene Epoch - Procedure

灭绝

Diversity and Extinction during the Paleogene Epoch
ExpandBegin this procedure by reading the extinction reading supplement that has been printed out for ...

Artificial Selection

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Observing Artificial Selection in Plants 
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">To begin the experiment, collect five two-week old grown plants from the generation one population that appear healthy. Note: Plants should appear green, not wilted, and not have damaged leaves. Experimental Hypothesis: The experimental hypothesis for this lab might be that the number of lead trichomes varies naturally, but the average number will increase over generations if only plants with the highest number of trichomes are interbred or decrease if those with the least are interbred. Null Hypothesis: The null hypothesis might be that the average number of trichomes will not change over subsequent generations after artificial selection.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Label each plant with a letter from A to E and with both partners&#8217; names.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Record any natural differences you see between your plant samples. Note: All of the plants are the same age, so any observed variation is due to expressed phenotype, not development.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Use a hand lens to count the number of trichomes found on the petiole of the lowest leaf, not including the round, first-grown cotyledons for each plant. Note: It can be helpful to shine a light onto the plant and to hold it against a dark background, such as a lab bench, during the trichome analysis. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Both partners will conduct counts on each plant independently and compare answers. If the counts are different, enlist a third counter or take the average of the two results.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">After this, determine the median number of trichomes for the entire class.  <a target="__blank" style="display:block;padding:20px;" href="https://www.jove.com/CDNSource/lm/labs/2/Lab_2_Table_A.xlsx">Click Here to download Table A</a>
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Determine the top and bottom 10% of the plants from the class trichome count. These groups will make up the two artificially selected lines: high hairiness and low hairiness, respectively.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">If more than 10% of the plants have no trichomes, select 10% of those plants randomly for the low hairiness plant line.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Separate the two groups of selected plants and label them clearly.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Move the plants to a well-lit area and keep them well watered until they develop flowers. Note: Flowers typically develop around 14 days.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">When the flowers are fully developed, use a pollination wand or paintbrush to rub the stigma and anther of one plant&#8217;s flowers for a few seconds.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Using the same wand or brush, rub the inside of each flower of every other plant in the same selection line.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Using a different wand or brush, repeat steps 11 through 12 on the other line. Note: Take care not to cross the lines. Spread the pollen only among the appropriately selected plants.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Return the generation one plants to the growing areas. When the plants reach approximately 1 month old, they should produce mature seed pods.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Allow the plants to dry out once the seed pods turn yellow.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Break the seed pods open and collect the seeds.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Obtain new pots for the generation two seeds.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Fill the pots with moist potting soil about halfway and add a fertilizer pellet to each pot.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Fill the pots with more soil to fill just below the lip.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Make a shallow depression in the soil of each pot with a probe.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Touch a clean toothpick to a gluestick and use the toothpick to transplant the seeds into the soil one by one.
</div></li><li data-sub-note-item="1-22"><div class="lab-step">Cover the seeds with a thin layer of soil.
</div></li><li data-sub-note-item="1-23"><div class="lab-step">Label the pots with their hairiness line and place them in the designated growing area.
</div></li><li data-sub-note-item="1-24"><div class="lab-step">Use a plastic dropper to water the plants as needed to ensure they do not dry out.
</div></li><li data-sub-note-item="1-25"><div class="lab-step">When the plants are two weeks old, collect five plants from each line and label them A to E.
</div></li><li data-sub-note-item="1-26"><div class="lab-step">Then, count the trichomes on these plants as previously described (steps 4- 5).
<a target="__blank" style="display:block;padding:20px;" href="https://www.jove.com/CDNSource/lm/labs/2/Lab_2_Table_B.xlsx">Click Here to download Table B</a>
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Data Analysis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Create a frequency graph based on the generation one class data with the trichome count on the x axis and the number of plants on the y axis. Label the mean. 
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Then, create frequency graphs for both of the selected hairiness lines.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Compare the frequency graphs for generation one and both hairiness lines.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Take note of phenotypic shifts observed in the selected hairiness lines.
</div></li></ul></li></ol>

Artificial Selection: Visualization in Plants and Data Analysis - Procedure

人工选择

Observing Artificial Selection in Plants 
ExpandTo begin the experiment, collect five two-week old grown plants from the generation one population that ...