The authors would like to acknowledge funding from the National Science Foundation (award # 1335550), Utah Water Research Laboratory, Professor Joan McLean and Tessa Guy for their help during the metal/metalloids analysis. The authors also thank Laura Birkhold for her support with the data collection and Danna Olbright.

<ol>
	<li>Dismukes, G. C., Carrieri, D., Bennette, N., Ananyev, G. M., Posewitz, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Aquatic+phototrophs:+efficient+alternatives+to+land-based+crops+for+biofuels.">Aquatic phototrophs: efficient alternatives to land-based crops for biofuels.</a> Curr Opin Biotechnol. 19 (3), 235-240 (2008).</li><li>Moody, J. W., McGinty, C. M., Quinn, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Global+evaluation+of+biofuel+potential+from+microalgae.">Global evaluation of biofuel potential from microalgae.</a> Proceedings of the National Academy of Sciences. 111 (23), 8691-8696 (2014).</li><li>Pinto, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal-induced+oxidative+stress+in+algae.">Heavy metal-induced oxidative stress in algae.</a> J Phycol. 39 (6), 1008-1018 (2003).</li><li>Gupta, A., Lutsenko, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evolution+of+copper+transporting+ATPases+in+eukaryotic+organisms.">Evolution of copper transporting ATPases in eukaryotic organisms.</a> Curr Genomics. 13 (2), 124-133 (2012).</li><li>Perales-Vela, H. V., Pe&#241;a-Castro, J. M., Ca&#241;izares-Villanueva, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal+detoxification+in+eukaryotic+microalgae.">Heavy metal detoxification in eukaryotic microalgae.</a> Chemosphere. 64 (1), 1-10 (2006).</li><li>Sandau, E., Sandau, P., Pulz, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal+sorption+by+microalgae.">Heavy metal sorption by microalgae.</a> Acta Biotechnol. 16 (4), 227-235 (1996).</li><li>Amer, L., Adhikari, B., Pellegrino, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Technoeconomic+analysis+of+five+microalgae-to-biofuels+processes+of+varying+complexity.">Technoeconomic analysis of five microalgae-to-biofuels processes of varying complexity.</a> Bioresour Technol. 102 (20), 9350-9359 (2011).</li><li>Benemann, J. R., Goebel, R. P., Weissman, J. C., Augenstein, D. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microalgae+as+a+source+of+liquid+fuels.">Microalgae as a source of liquid fuels.</a> Final Technical Report, US Department of Energy, Office of Research. , (1982).</li><li>Benemann, J. R., Oswald, W. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Report+No.+DOE/PC/93204--T5+Other:+ON:+DE97052880;+TRN:+TRN.">Report No. DOE/PC/93204--T5 Other: ON: DE97052880; TRN: TRN.</a> Systems and economic analysis of microalgae ponds for conversion of CO2 to biomass. , (1996).</li><li>Chisti, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biodiesel+from+microalgae.">Biodiesel from microalgae.</a> Biotechnol Adv. 25 (3), 294-306 (2007).</li><li>Davis, R., Aden, A., Pienkos, P. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Techno-economic+analysis+of+autotrophic+microalgae+for+fuel+production.">Techno-economic analysis of autotrophic microalgae for fuel production.</a> Applied Energy. 88 (10), 3524-3531 (2011).</li><li>Jones, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Process+design+and+economics+for+the+conversion+of+algal+biomass+to+hydrocarbons:+whole+algae+hydrothermal+liquefaction+and+upgrading.">Process design and economics for the conversion of algal biomass to hydrocarbons: whole algae hydrothermal liquefaction and upgrading.</a> U.S. Department of Energy Bioenergy Technologies Office. , (2014).</li><li>Lundquist, T. J., Woertz, I. C., Quinn, N. W. T., Benemann, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+realistic+technology+and+engineering+assessment+of+algae+biofuel+production.">A realistic technology and engineering assessment of algae biofuel production.</a> Energy Biosciences Institute. , (2010).</li><li>Nagarajan, S., Chou, S. K., Cao, S., Wu, C., Zhou, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+updated+comprehensive+techno-economic+analysis+of+algae+biodiesel.">An updated comprehensive techno-economic analysis of algae biodiesel.</a> Bioresour Technol. 145, 150-156 (2011).</li><li>Pienkos, P. T., Darzins, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+promise+and+challenges+of+microalgal-derived+biofuels.">The promise and challenges of microalgal-derived biofuels.</a> Biofuels Bioproducts &amp; Biorefining-Biofpr. 3, 431-440 (2009).</li><li>Richardson, J. W., Johnson, M. D., Outlaw, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Economic+comparison+of+open+pond+raceways+to+photo+bio-reactors+for+profitable+production+of+algae+for+transportation+fuels+in+the+Southwest.">Economic comparison of open pond raceways to photo bio-reactors for profitable production of algae for transportation fuels in the Southwest.</a> Algal Research. 1 (1), 93-100 (2012).</li><li>Rogers, J. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+critical+analysis+of+paddlewheel-driven+raceway+ponds+for+algal+biofuel+production+at+commercial+scales.">A critical analysis of paddlewheel-driven raceway ponds for algal biofuel production at commercial scales.</a> Algal Research. 4, 76-88 (1016).</li><li>Sun, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+cost+analysis+of+algal+oil+production+for+biofuels.">Comparative cost analysis of algal oil production for biofuels.</a> Energy. 36 (8), 5169-5179 (2011).</li><li>Thilakaratne, R., Wright, M. M., Brown, R. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+techno-economic+analysis+of+microalgae+remnant+catalytic+pyrolysis+and+upgrading+to+fuels.">A techno-economic analysis of microalgae remnant catalytic pyrolysis and upgrading to fuels.</a> Fuel. 128, 104-112 (2014).</li><li>Quinn, J. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nannochloropsis+production+metrics+in+a+scalable+outdoor+photobioreactor+for+commercial+applications.">Nannochloropsis production metrics in a scalable outdoor photobioreactor for commercial applications.</a> Bioresour Technol. 117, 164-171 (2012).</li><li>Borkenstein, C., Knoblechner, J., Fr&#252;hwirth, H., Schagerl, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cultivation+of+Chlorella+emersonii+with+flue+gas+derived+from+a+cement+plant.">Cultivation of Chlorella emersonii with flue gas derived from a cement plant.</a> J Appl Phycol. 23 (1), 131-135 (2010).</li><li>Douskova, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+flue+gas+bioremediation+and+reduction+of+microalgal+biomass+production+costs.">Simultaneous flue gas bioremediation and reduction of microalgal biomass production costs.</a> Appl Microbiol Biotechnol. 82 (1), 179-185 (2009).</li><li>Israel, A., Gavrieli, J., Glazer, A., Friedlander, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Utilization+of+flue+gas+from+a+power+plant+for+tank+cultivation+of+the+red+seaweed+Gracilaria+cornea.">Utilization of flue gas from a power plant for tank cultivation of the red seaweed Gracilaria cornea.</a> Aquaculture. 249 (1-4), 311-316 (2012).</li><li>Napan, K., Teng, L., Quinn, J. C., Wood, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Impact of Heavy Metals from Flue Gas Integration with Microalgae Production. , (2015).</li><li>Eaton, A. D., Clesceri, L. S., Rice, E. W., Greenberg, A. E. 3. 1. 2. 5. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inductively+coupled+plasma/mass+spectrometry+(ICP/MS)+method.">Inductively coupled plasma/mass spectrometry (ICP/MS) method.</a> Standard methods for the examination of water and wastewater. , (2005).</li><li>Smith, M., Compton, J. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Matrix effects in the ICP-MS analysis of selenium in saline water samples. , (2004).</li><li>Mehta, S. K., Gaur, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+algae+for+removing+heavy+metal+ions+from+wastewater:+progress+and+prospects.">Use of algae for removing heavy metal ions from wastewater: progress and prospects.</a> Crit Rev Biotechnol. 25 (3), 113-152 (2005).</li><li>Eaton, A. D., Clesceri, L. S., Rice, E. W., Greenberg, A. E. 3. 1. 2. 0. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inductively+coupled+plasma+(ICP)+method.">Inductively coupled plasma (ICP) method.</a> Standard methods for the examination of water and wastewater. , (2005).</li></ol>

The authors declare that they have no competing financial interests.

盐水微藻N.藻可以成功地生长在设计的生长系统，可重复的结果和高生物量产量。空运混合允许以最小的沉降或生物结垢超过7天的生长周期的良好混合的悬浮培养。横跨荧光银行的最小光变性还被示为不产生在生长明显的差异。 该研究显示重金属浓度代表以煤烟气负面影响生物质生长的整合污染的介质。重复性的研究突出了多​​金属系统对生产力的影响。在这一过?...

相比传统的陆地作物微藻已经示出实现由于固有较高的太阳能转换效率1,2-更高的生物量和脂质的产量。培养微藻以高的生产率，需要各种营养素，包括外部碳源的供应。据预计，大规模增长设施将与工业废物流如工业烟道气被集成，以尽量减少生产成本，并在同一时间提供环境整治。工业废弃物的碳通常以气态二氧化碳的形式，并且可以包含有潜力微藻生产产生不利影响的污染物。具体地，从煤衍生的烟道气会产生多种污染物，包括但不限于燃烧产物水和二氧化碳，以及硫和氮，细尘，有机污染物如二恶英和呋喃的氧化物和无机CON组taminants如重金属。大部分这些污染物包括无机物其中一些被称为上微藻生产率重金属的影响还没有被探讨。一些这些元素可以是营养物的适当浓度，但是在较高浓度下它们能产生细胞功能障碍，甚至死亡3。 微藻工业烟道气的集成有直接引入无机污染物进入生长介质的潜力。基于煤烟气具有多种无机元素（ 如砷，镉，钴，铬，铜，汞，锰，镍，铅，锑，硒，锡，V和Zn）在不同浓度的其中一些，在低浓度，代表营养微藻生长。无机污染物有一个高亲和力结合微藻，并进一步通过养分转运内部吸附。有些无机污染物（ 即钴，铜，锌和锰）是构成酶的组成部分营养素涉及d。在光合作用，呼吸作用等功能3,4。但是，在过量金属和准金属可能是有毒的。其它元素，如铅，镉，锡，锑，硒，砷，汞，不知道以支持细胞功能的任何浓度和代表非营养金属可能培养生长3,5,6负面影响。任何这些污染物的存在具有产生对微藻细胞功能的负面影响的可能性。此外，多种金属与微藻的相互作用复杂增长动力，并有可能影响增长潜力。 大规模的经济已直接关系到培养体系7-19的生产力。此外，因为它代表了99.9和99.4％质量的，分别为20在为任一开放轨道池塘（ORP），或光生物反应器的微藻生长系统（PBR）介质再循环是至关重要的。无机污染物在媒体的存在可能最终限制了米icroalgae生产力和媒体因污染物积聚的回收利用。本研究实验确定的14无机污染物的影响（如，镉，钴，铬，铜，汞，锰，镍，铅，锑，硒，锡，钒和锌）中，在从微藻培养系统的集成预期浓度与煤衍生的烟道气，在N的生产率藻生长在空运PBRS。在这项研究中所用的污染物已被证明不仅存在于煤基烟气但市政废物基烟道气，生物固体基烟道气，城市废水，产生的水，受损的地下水和海水21-23。在这项研究中使用的浓度是基于所预期如果微藻生长系统进行集成了煤基CO 2源与吸收效率在商业PBR系统20证实。详细的计算支持重金属和无机污染物的浓度在Napan呈现等人 24的分析技术被用来理解多数在生物量，媒体和环境的金属的分布。介绍的方法使微藻的生产潜力的评估下，无机污染物的压力和他们的命运结束量化。

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td colspan="4">Chemicals</td>
		</tr>
		<tr>
			<td>Sodium chloride</td>
			<td>Fisher Scientific</td>
			<td>S271-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium chloride dihydrate</td>
			<td>Fisher Scientific</td>
			<td>C79-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium chloride</td>
			<td>Fisher Scientific</td>
			<td>P217-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium meta silicate nonahydrate&#160;</td>
			<td>Fisher Scientific</td>
			<td>S408-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnesium sulfate heptahydrate&#160;</td>
			<td>Fisher Scientific</td>
			<td>M63-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium nitrate</td>
			<td>EMD Chemical</td>
			<td>PX1520-5</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium phosphate monobasic&#160;</td>
			<td>Fisher Scientific</td>
			<td>P285-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Ammonium ferric citrate</td>
			<td>Fisher Scientific</td>
			<td>I72-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Boric acid</td>
			<td>Fisher Scientific</td>
			<td>A73-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium molybdate, dihydrate</td>
			<td>EMD Chemical</td>
			<td>SX0650-2</td>
			<td></td>
		</tr>
		<tr>
			<td>Manganese chloride tetrahydrate</td>
			<td>Fisher Scientific</td>
			<td>M87-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Zinc sulfate heptahydrate</td>
			<td>Fisher Scientific</td>
			<td>Z68-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Cupric sulfate pentahydrate</td>
			<td>Fisher Scientific</td>
			<td>C489-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Biotin&#160;</td>
			<td>Acros Organics</td>
			<td>230090010</td>
			<td></td>
		</tr>
		<tr>
			<td>Thiamine&#160;</td>
			<td>Acros Organics</td>
			<td>148990100</td>
			<td></td>
		</tr>
		<tr>
			<td>Vitamin B12&#160;</td>
			<td>Acros Organics</td>
			<td>405920010</td>
			<td></td>
		</tr>
		<tr>
			<td>Copper (II) chloride dihydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>221783-100G</td>
			<td>Irritant, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Lead (II) chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>268690-250G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Sodium dichromate dihydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>398063-100G</td>
			<td>Oxidizing, Highly Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Cobalt (II) chloride hexahydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>255599-100G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Nickel (II) chloride hexahydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>223387-500G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Sodium (meta) arsenite&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>71287</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Cadmium chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>202908-10G</td>
			<td>Highly Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Mercury (II) chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>215465-100G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Tin (II) chloride dihydrate</td>
			<td>Fisher Scientific</td>
			<td>T142-500</td>
			<td>Corrosive. Suitable for Hg analysis. Very hazardous.</td>
		</tr>
		<tr>
			<td>Manganese chloride tetrahydrate</td>
			<td>Fisher Scientific</td>
			<td>M87-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Vanadium (V) oxide</td>
			<td>Acros Organics</td>
			<td>206422500</td>
			<td>Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Carbon dioxide&#160;</td>
			<td>Air Liquide</td>
			<td>I2301S-1</td>
			<td>Compressed</td>
		</tr>
		<tr>
			<td>Hydrogen peroxide</td>
			<td>H325-500</td>
			<td>Fisher Scientific</td>
			<td>30% in water</td>
		</tr>
		<tr>
			<td>ICP-MS standard</td>
			<td>ICP-MS-6020</td>
			<td>High Purity Standards</td>
			<td></td>
		</tr>
		<tr>
			<td>Mercury standard</td>
			<td>CGHG1-1</td>
			<td>Inorganic Ventures</td>
			<td>1000&#177;6 &#181;g/mL in 5% nitric acid</td>
		</tr>
		<tr>
			<td>Argon</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed</td>
		</tr>
		<tr>
			<td>Helium</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed, ultra high purity</td>
		</tr>
		<tr>
			<td>Hydrogen</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed, ultra high purity</td>
		</tr>
		<tr>
			<td>Nitric acid</td>
			<td>Fisher Scientific</td>
			<td>A509-P212</td>
			<td>67-70% nitric acid, trace metal grade. Caution: manipulate under fume hood.</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Fisher Scientific</td>
			<td>A508-P212</td>
			<td>35% hydrochloric acid, trace metal grade. Caution: manipulate under fume hood.</td>
		</tr>
		<tr>
			<td colspan="4">Equipment</td>
		</tr>
		<tr>
			<td>Scientific prevacuum sterilizer</td>
			<td>Steris</td>
			<td>31626A</td>
			<td>SV-120</td>
		</tr>
		<tr>
			<td>Centrifuge</td>
			<td>Thermo Fisher</td>
			<td>46910</td>
			<td>RC-6 Plus</td>
		</tr>
		<tr>
			<td>Spectrophotometer</td>
			<td>Shimadzu</td>
			<td>1867</td>
			<td>UV-1800</td>
		</tr>
		<tr>
			<td>pH controller</td>
			<td>Hanna</td>
			<td>BL981411</td>
			<td>X4</td>
		</tr>
		<tr>
			<td>Rotometer, X5</td>
			<td>Dwyer</td>
			<td>RMA-151-SSV</td>
			<td>T31Y</td>
		</tr>
		<tr>
			<td>Rotometer, X5</td>
			<td>Dwyer</td>
			<td>RMA-26-SSV</td>
			<td>T35Y</td>
		</tr>
		<tr>
			<td>Water bath circulator</td>
			<td>Fisher Scientific</td>
			<td>13-873-45A</td>
			<td></td>
		</tr>
		<tr>
			<td>Compact chiller</td>
			<td>VWR</td>
			<td>13270-120</td>
			<td></td>
		</tr>
		<tr>
			<td>Freeze dryer</td>
			<td>Labconco</td>
			<td>7752020</td>
			<td></td>
		</tr>
		<tr>
			<td>Stir plate</td>
			<td>Fisher Scientific</td>
			<td>11-100-49S</td>
			<td></td>
		</tr>
		<tr>
			<td>pH lab electrode</td>
			<td>Phidgets Inc</td>
			<td>3550</td>
			<td></td>
		</tr>
		<tr>
			<td>Inductively coupled plasma mass spectrometer</td>
			<td>Agilent Technologies</td>
			<td>7700 Series ICP-MS</td>
			<td>Attached to autosampler CETAC ASX-520</td>
		</tr>
		<tr>
			<td>FIAS 100</td>
			<td>Perkin Elmer Instruments</td>
			<td>B0506520</td>
			<td></td>
		</tr>
		<tr>
			<td>Atomic absorption spectrometer</td>
			<td>Perkin Elmer Instruments</td>
			<td>AAnalyst 800</td>
			<td></td>
		</tr>
		<tr>
			<td>Cell heater (quartz)</td>
			<td>Perkin Elmer Instruments</td>
			<td>B3120397</td>
			<td></td>
		</tr>
		<tr>
			<td>Microwave</td>
			<td>Milestone</td>
			<td></td>
			<td>Programmable, maximum power 1200 W</td>
		</tr>
		<tr>
			<td>Microwave rotor</td>
			<td>Milestone</td>
			<td></td>
			<td>Rotor with 24 75 mL Teflon vessels for closed-vessel microwave assisted digestion.</td>
		</tr>
		<tr>
			<td colspan="4">Materials</td>
		</tr>
		<tr>
			<td>0.2 micron syringe filter</td>
			<td>Whatman</td>
			<td>6713-0425</td>
			<td></td>
		</tr>
		<tr>
			<td>0.2 micron syringe filter</td>
			<td>Whatman</td>
			<td>6713-1650</td>
			<td></td>
		</tr>
		<tr>
			<td>0.45 micron syringe filter</td>
			<td>Thermo Fisher</td>
			<td>F2500-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Polystyrene tubes</td>
			<td>Evergreen</td>
			<td>222-2094-050</td>
			<td>17x100 mm w/cap, 16 mL, polysteryne</td>
		</tr>
		<tr>
			<td>Octogonal magnetic&#160;stir&#160;bars</td>
			<td>Fisher scientific</td>
			<td>14-513-60</td>
			<td>Magnets encased in PTFE fluoropolymer</td>
		</tr>
	</tbody>
</table>

quantification of heavy metals and other inorganic contaminants on the productivity of microalgae

增加了对可再生燃料的需求有研究者研究的替代原料如微藻的可行性。固有的优点包括高产量的潜力，利用非耕地和集成废物流。大规模微藻生产系统的营养需求将需要栽培系统具有工业废物资源，如二氧化碳从烟道气和从废水中养分的耦合。存在于这些废物无机污染物有可能导致生物蓄积在微藻生物生产力和限制终端使用产生负面影响。本研究着重于影响的实验评估和14无机污染物（砷，镉，钴，铬，铜，汞，锰，镍，铅，锑，硒，锡，钒和锌）的微绿球藻生长的命运。微藻分别在生长米栽培在光生物反应器照射在984微摩尔米-2秒-1，并保持在pH7EDIA污染与无机污染物的水平预期基础上，商品煤烟气系统中的组成。存在于生物质并在7天的生长周期结束的介质污染物通过冷原子吸收光谱法解析量化汞，并通过电感耦合等离子体质谱法对砷，镉，钴，铬，铜，锰，镍，铅，锑，硒，锡，钒和锌。结果显示N.藻是一个敏感的应变与生物量的统计减少yieldwith引入这些污染物的多金属环境。这里介绍的技术是足够用于量化藻类生长和确定无机污染物的命运。

生物质产量生产的N.藻在本研究中使用的PBR系统增长为1克/升-1至8.5±0.19克/升-1（N = 12），用于控制反应器和4.0±0.3克/升-1（N = 12）的多金属污染的7天。实验横跨一式三份反应器和多批次产生可重复的数据。 图2A示出的平均培养密度与基于来自三个独立PBRS采样非常小的标准误差。为了确保这一结果并不是一个孤立的结果，三个批次的...

Watch this Scientific Journal Video about Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae at JoVE.com

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae

Integration of microalgal cultivation with industrial flue gas will ultimately introduce heavy metals and other inorganic compounds into the growth media. This study presents a procedure used to determine the end fate and impact of heavy metals and inorganic contaminants on the growth of Nannochloropsis salina grown in photobioreactors.

重金属和微藻的产其他无机污染物的量化

Increasing demand for renewable fuels has researchers investigating the feasibility of alternative feedstocks, such as microalgae. Inherent advantages ...

quantification-heavy-metals-other-inorganic-contaminants-on

Research

JoVE Journal

Environment

15.8K 次观看.  Utah State University. Integration of microalgal cultivation with industrial flue gas will ultimately introduce heavy metals and other inorganic compounds into the growth media. This study presents a procedure used to determine the end fate and impact of heavy metals and inorganic contaminants on the growth of Nannochloropsis salina grown in photobioreactors.

视频: Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae

Analysis of Fatty Acid Content and Composition in Microalgae

A method to determine the content and composition of total fatty acids present in microalgae is described. Fatty acids are a major constituent of microalgal biomass. These fatty acids can be present in different acyl-lipid classes. Especially the fatty acids present in triacylglycerol (TAG) are of commercial interest, because they can be used for production of transportation fuels, bulk chemicals, nutraceuticals (&omega;-3 fatty acids), and food commodities. To develop commercial applications, reliable analytical methods for quantification of fatty acid content and composition are needed. Microalgae are single cells surrounded by a rigid cell wall. A fatty acid analysis method should provide sufficient cell disruption to liberate all acyl lipids and the extraction procedure used should be able to extract all acyl lipid classes.
With the method presented here all fatty acids present in microalgae can be accurately and reproducibly identified and quantified using small amounts of sample (5 mg) independent of their chain length, degree of unsaturation, or the lipid class they are part of.
This method does not provide information about the relative abundance of different lipid classes, but can be extended to separate lipid classes from each other.
The method is based on a sequence of mechanical cell disruption, solvent based lipid extraction, transesterification of fatty acids to fatty acid methyl esters (FAMEs), and quantification and identification of FAMEs using gas chromatography (GC-FID). A TAG internal standard (tripentadecanoin) is added prior to the analytical procedure to correct for losses during extraction and incomplete transesterification.

A method for the determination of fatty acid content and composition in microalgae based on mechanical cell disruption, solvent based lipid extraction, transesterification, and quantification and identification of fatty acids using gas chromatography is described. A tripentadecanoin internal standard is used to compensate for the possible losses during extraction and incomplete transesterification.

脂肪酸组分和含量微藻分析

A method to determine the content and composition of total fatty acids present in microalgae is described. Fatty acids are a major constituent of ...

科研

环境科学

A Whole Cell Bioreporter Approach to Assess Transport and Bioavailability of Organic Contaminants in Water Unsaturated Systems

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is not an appropriate measure for its availability; bioavailability rather depends on the dynamic interplay of potential mass transfer (flux) of a compound to a microbial cell and the capacity of the latter to degrade the compound. In water-unsaturated parts of the soil, mycelia have been shown to overcome bioavailability limitations by actively transporting and mobilizing organic compounds over the range of centimeters. Whereas the extent of mycelia-based transport can be quantified easily by chemical means, verification of the contaminant-bioavailability to bacterial cells requires a biological method. Addressing this constraint, we chose the PAH fluorene (FLU) as a model compound and developed a water unsaturated model microcosm linking a spatially separated FLU point source and the FLU degrading bioreporter bacterium Burkholderia sartisoli RP037-mChe by a mycelial network of Pythium ultimum. Since the bioreporter expresses eGFP in response of the PAH flux to the cell, bacterial FLU exposure and degradation could be monitored directly in the microcosms via confocal laser scanning microscopy (CLSM). CLSM and image analyses revealed a significant increase of the eGFP expression in the presence of P. ultimum compared to controls without mycelia or FLU thus indicating FLU bioavailability to bacteria after mycelia-mediated transport. CLSM results were supported by chemical analyses in identical microcosms. The developed microcosm proved suitable to investigate contaminant bioavailability and to concomitantly visualize the involved bacteria-mycelial interactions.

A whole cell bioreporter assay with Burkholderia sartisoli RP037-mChe was developed to detect fractions of an organic contaminant (i.e., fluorene) available for bacterial degradation after active transport by mycelia bridging air-filled pores in a water unsaturated model system.

全细胞Bioreporter方法​​评估交通有机污染物的生物利用度和水饱和系统

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is ...

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including Pristionchus pacificus display complex behaviors, the most striking of which is the predation of other nematode larvae. However, as these behaviors are absent in the model organism Caenorhabditis elegans, they have thus far only recently been described in detail along with the development of reliable behavioral assays 1. These predatory behaviors are dependent upon phenotypically plastic but fixed mouth morphs making the correct identification and categorization of these animals essential. In P. pacificus there are two mouth types, the stenostomatous and eurystomatous morphs 2, with only the wide mouthed eurystomatous containing an extra tooth and being capable of killing other nematode larvae. Through the isolation of an abundance of size matched prey larvae and subsequent exposure to predatory nematodes, assays including both "corpse assays" and "bite assays" on correctly identified mouth morph nematodes are possible. These assays provide a means to rapidly quantify predation success rates and provide a detailed behavioral analysis of individual nematodes engaged in predatory feeding activities. In addition, with the use of a high-speed camera, visualization of changes in pharyngeal activity including tooth and pumping dynamics are also possible.

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

Behavioral assays provide powerful tools for understanding neuronal function. Here we present several protocols for quantifying predatory feeding behavior found in the model nematode Pristionchus pacificus and its relatives. Additionally, we provide methods for analyzing predatory feeding adaptations including mouth structures and teeth.

测定掠夺取食行为<em&gt; Pristionchus</em&gt;及其他线虫

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including ...

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food webs. Toxicity testing based on microorganisms are widely used because they are relatively quick, reproducible, cheap, and are not associated with ethical issues. Here, we describe an ecotoxicological method to evaluate the biological response of the marine bacterium Vibrio anguillarum. This method assesses the acute toxicity of chemical compounds, including new contaminants such as nanoparticles, as well as environmental samples. The endpoint is the reduction of bacterial culturability (i.e., the capability to replicate and form colonies) due to exposure to a toxicant. This reduction can be generally referred to as mortality. The test allows for the determination of the LC50, the concentration that causes a 50% decrease of bacteria actively replicating and forming colonies, after a 6 h exposure. The culturable bacteria are counted in terms of colony forming units (CFU), and the &#34;mortality&#34; is evaluated and compared to the control. In this work, the toxicity of copper sulphate (CuSO4) was evaluated. A clear dose-response relationship was observed, with a mean LC50 of 1.13 mg/L, after three independent tests. This protocol, compared to existing methods with microorganisms, is applicable in a wider range of salinity and has no limitations for colored/turbid samples. It uses saline solution as the exposure medium, avoiding any possible interferences of growth medium with the investigated contaminants. The LC50 calculation facilitates comparisons with other bioassays commonly applied to ecotoxicological assessments of the marine environment.

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

This work describes a new protocol to assess the ecotoxicity of pollutants, including emerging contaminants such as nanomaterials, using the marine bacterium Vibrio anguillarum. This method allows for the determination of the LC50, or mortality, the concentration that causes a 50% decrease in bacteria culturability, after a 6 h exposure.

生物毒理学方法与海洋细菌<em&gt;鳗弧菌</em&gt;评估环境污染物的急性毒性

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food ...

Preparation of DMMTAV and DMDTAV Using DMAV for Environmental Applications: Synthesis, Purification, and Confirmation

Dimethylated thioarsenicals such as dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV), which are produced by the metabolic pathway of dimethylarsinic acid (DMAV) thiolation, have been recently found in the environment as well as human organs. DMMTAV and DMDTAV can be quantified to determine the ecological effects of dimethylated thioarsenicals and their stability in environmental media. The synthesis method for these compounds is unstandardized, making replicating previous studies challenging. Furthermore, there is a lack of information about storage techniques, including storage of compounds without species transformation. Moreover, because only limited information about synthesis methods is available, there may be experimental difficulties in synthesizing standard chemicals and performing quantitative analysis. The protocol presented herein provides a practically modified synthesis method for the dimethylated thioarsenicals, DMMTAV and DMDTAV, and will help in the quantification of species separation analysis using high performance liquid chromatography in conjunction with inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The experimental steps of this procedure were modified by focusing on the preparation of chemical reagents, filtration methods, and storage.

Preparation of DMMTAV and DMDTAV Using DMAV for Environmental Applications: Synthesis, Purification, and Confirmation

This article presents modified experimental protocols for dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV) synthesis, inducing dimethylarsinic acid (DMAV) thiolation through mixing of DMAV, Na2S, and H2SO4. The modified protocol provides an experimental guideline, thereby overcoming limitations of the synthesis steps that could have caused experimental failures in quantitative analysis.

使用 DMAv为环境应用 DMMTAv和 DMDTAv的准备: 合成、纯化和确认

Dimethylated thioarsenicals such as dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV), which are produced by the metabolic ...

Harvesting Venom Toxins from Assassin Bugs and Other Heteropteran Insects

Heteropteran insects such as assassin bugs (Reduviidae) and giant water bugs (Belostomatidae) descended from a common predaceous and venomous ancestor, and the majority of extant heteropterans retain this trophic strategy. Some heteropterans have transitioned to feeding on vertebrate blood (such as the kissing bugs, Triatominae; and bed bugs, Cimicidae) while others have reverted to feeding on plants (most Pentatomomorpha). However, with the exception of saliva used by kissing bugs to facilitate blood-feeding, little is known about heteropteran venoms compared to the venoms of spiders, scorpions and snakes.
One obstacle to the characterization of heteropteran venom toxins is the structure and function of the venom/labial glands, which are both morphologically complex and perform multiple biological roles (defense, prey capture, and extra-oral digestion). In this article, we describe three methods we have successfully used to collect heteropteran venoms. First, we present electrostimulation as a convenient way to collect venom that is often lethal when injected into prey animals, and which obviates contamination by glandular tissue. Second, we show that gentle harassment of animals is sufficient to produce venom extrusion from the proboscis and/or venom spitting in some groups of heteropterans. Third, we describe methods to harvest venom toxins by dissection of anaesthetized animals to obtain the venom glands. This method is complementary to other methods, as it may allow harvesting of toxins from taxa in which electrostimulation and harassment are ineffective. These protocols will enable researchers to harvest toxins from heteropteran insects for structure-function characterization and possible applications in medicine and agriculture.

Although many insects in the suborder Heteroptera (Insecta: Hemiptera) are venomous, their venom composition and the functions of their venom toxins are mostly unknown. This protocol describes methods to harvest heteropteran venoms for further characterization, using electrostimulation, harassment, and gland dissection.

从刺客臭虫和其他 Heteropteran 昆虫身上采集毒液毒素

Heteropteran insects such as assassin bugs (Reduviidae) and giant water bugs (Belostomatidae) descended from a common predaceous and venomous ancestor, ...

Evaluation of the Productivity of Social Wasp Colonies (Vespinae) and an Introduction to the Traditional Japanese Vespula Wasp Hunting Technique

For vespine wasps, colony productivity is typically estimated by counting the number of larval cells. This paper presents an improved method that enables researchers to estimate more accurately the number of adults produced, counting the number of meconia (the stools left in the cells by wasp larvae when pupating into adults, per 100 cells) in each comb. This method can be applied before or after colony collapse (i.e., in active or inactive nests). The paper also describes how to locate wild Vespula wasp colonies by &#34;flagging&#34; wasp baits and chasing the wasp collecting them, using a method traditionally performed by local people in central Japan (as illustrated in the associated video). The Vespula chasing method described has several advantages: it is easy to reinitiate the chase from a point where the forager flying back to the nest was lost, and it is easy to pinpoint the nest location as marked wasps often lose their flag at the nest entrance. These methods for estimating colony productivity and collecting nests can be valuable for researchers studying social wasps.

Evaluation of the Productivity of Social Wasp Colonies Vespinae and an Introduction to the Traditional Japanese Vespula Wasp Hunting Technique

This methodological paper evaluates the productivity of a social wasp colony by examining the number of meconia per 100 cells of comb, to estimate the total number of adults the wasps produced. The associated video describes how to search for Vespula wasp nests, a method developed by amateur wasp chasers.

社会黄蜂群落（韦皮纳）生产力评价及日本传统黄蜂狩猎技术简介

For vespine wasps, colony productivity is typically estimated by counting the number of larval cells. This paper presents an improved method that enables ...

Cultivation of Green Microalgae in Bubble Column Photobioreactors and an Assay for Neutral Lipids

There is significant interest in the study of microalgae for engineering applications such as the production of biofuels, high value products, and for the treatment of wastes. As most new research efforts begin at laboratory scale, there is a need for cost-effective methods for culturing microalgae in a reproducible manner. Here, we communicate an effective approach to culture microalgae in laboratory-scale photobioreactors, and to measure the growth and neutral lipid content of that algae. Instructions are also included on how to set up the photobioreactor system. Although the example organisms are species of Chlorella and Auxenochlorella, this system can be adapted to cultivate a wide range of microalgae, including co-cultures of algae with non-algae species. Stock cultures are first grown in bottles to produce inoculum for the photobioreactor system. Algae inoculum is concentrated and transferred to photobioreactors for cultivation in batch mode. Samples are collected daily for the optical density readings. At the end of the batch culture, cells are harvested by centrifuge, washed, and freeze dried to obtain a final dry weight concentration. The final dry weight concentration is used to create a correlation between the optical density and the dry weight concentration. A modified Folch method is subsequently used to extract total lipids from the freeze-dried biomass and the extract is assayed for its neutral lipid content using a microplate assay. This assay has been published previously but protocol steps were included here to highlight critical steps in the procedure where errors frequently occur. The bioreactor system described here fills a niche between simple flask cultivation and fully-controlled commercial bioreactors. Even with only 3-4 biological replicates per treatment, our approach to culturing algae leads to tight standard deviations in the growth and lipid assays.

Here, we present a protocol to construct lab-scale bubble column photobioreactors and use them to culture microalgae. It also provides a method for the determination of the culture growth rate and neutral lipid content.

气泡柱光生物反应器中绿色微藻的培养及中性脂质的测定

There is significant interest in the study of microalgae for engineering applications such as the production of biofuels, high value products, and for the ...

Microalgae Cultivation and Biomass Quantification in a Bench-Scale Photobioreactor with Corrosive Flue Gases

Photobioreactors are illuminated cultivation systems for experiments on phototrophic microorganisms. These systems provide a sterile environment for microalgal cultivation with temperature, pH, and gas composition and flow rate control. At bench-scale, photobioreactors are advantageous to researchers studying microalgal properties, productivity, and growth optimization. At industrial scales, photobioreactors can maintain product purity and improve production efficiency. The video describes the preparation and use of a bench-scale photobioreactor for microalgal cultivation, including the safe use of corrosive gas inputs, and details relevant biomass measurements and biomass productivity calculations. Specifically, the video illustrates microalgal culture storage and preparation for inoculation, photobioreactor assembly and sterilization, biomass concentration measurements, and a logistic model for microalgal biomass productivity with rate calculations including maximum and overall biomass productivities. Additionally, since there is growing interest in experiments to cultivate microalgae using simulated or real waste gas emissions, the video will cover the photobioreactor equipment adaptations necessary to work with corrosive gases and discuss safe sampling in such scenarios.

Bench-scale, axenic cultivation facilitates microalgal characterization and productivity optimization before subsequent process scale-up. Photobioreactors provide the necessary control for reliable and reproducible microalgal experiments and can be adapted to safely cultivate microalgae with the corrosive gases (CO2, SO2, NO2) from municipal or industrial combustion emissions.

具有腐蚀性烟气的台式光生物反应器中的微藻培养和生物量定量

Photobioreactors are illuminated cultivation systems for experiments on phototrophic microorganisms. These systems provide a sterile environment for ...

Two-Dimensional Visualization and Quantification of Labile, Inorganic Plant Nutrients and Contaminants in Soil

We describe a method for two-dimensional (2D) visualization and quantification of the distribution of labile (i.e., reversibly adsorbed) inorganic nutrient (e.g., P, Fe, Mn) and contaminant (e.g., As, Cd, Pb) solute species in the soil adjacent to plant roots (the &#8216;rhizosphere&#8217;) at sub-millimeter (~100 &#181;m) spatial resolution. The method combines sink-based solute sampling by the diffusive gradients in thin films (DGT) technique with spatially resolved chemical analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The DGT technique is based on thin hydrogels with homogeneously distributed analyte-selective binding phases. The variety of available binding phases allows for the preparation of different DGT gel types following simple gel fabrication procedures. For DGT gel deployment in the rhizosphere, plants are grown in flat, transparent growth containers (rhizotrons), which enable minimal invasive access to a soil-grown root system. After a pre-growth period, DGT gels are applied to selected regions of interest for in situ solute sampling in the rhizosphere. Afterwards, DGT gels are retrieved and prepared for subsequent chemical analysis of the bound solutes using LA-ICP-MS line-scan imaging. Application of internal normalization using 13C and external calibration using matrix-matched gel standards further allows for the quantification of the 2D solute fluxes. This method is unique in its capability to generate quantitative, sub-mm scale 2D images of multi-element solute fluxes in soil-plant environments, exceeding the achievable spatial resolution of other methods for measuring solute gradients in the rhizosphere substantially. We present the application and evaluation of the method for imaging multiple cationic and anionic solute species in the rhizosphere of terrestrial plants and highlight the possibility of combining this method with complementary solute imaging techniques.

This protocol presents a workflow for sub-mm 2D visualization of multiple labile inorganic nutrient and contaminant solute species using diffusive gradients in thin films (DGT) combined with mass spectrometry imaging. Solute sampling and high-resolution chemical analysis are described in detail for quantitative mapping of solutes in the rhizosphere of terrestrial plants.