The authors would like to acknowledge funding from the National Science Foundation (award # 1335550), Utah Water Research Laboratory, Professor Joan McLean and Tessa Guy for their help during the metal/metalloids analysis. The authors also thank Laura Birkhold for her support with the data collection and Danna Olbright.

<ol>
	<li>Dismukes, G. C., Carrieri, D., Bennette, N., Ananyev, G. M., Posewitz, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Aquatic+phototrophs:+efficient+alternatives+to+land-based+crops+for+biofuels.">Aquatic phototrophs: efficient alternatives to land-based crops for biofuels.</a> Curr Opin Biotechnol. 19 (3), 235-240 (2008).</li><li>Moody, J. W., McGinty, C. M., Quinn, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Global+evaluation+of+biofuel+potential+from+microalgae.">Global evaluation of biofuel potential from microalgae.</a> Proceedings of the National Academy of Sciences. 111 (23), 8691-8696 (2014).</li><li>Pinto, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal-induced+oxidative+stress+in+algae.">Heavy metal-induced oxidative stress in algae.</a> J Phycol. 39 (6), 1008-1018 (2003).</li><li>Gupta, A., Lutsenko, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evolution+of+copper+transporting+ATPases+in+eukaryotic+organisms.">Evolution of copper transporting ATPases in eukaryotic organisms.</a> Curr Genomics. 13 (2), 124-133 (2012).</li><li>Perales-Vela, H. V., Pe&#241;a-Castro, J. M., Ca&#241;izares-Villanueva, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal+detoxification+in+eukaryotic+microalgae.">Heavy metal detoxification in eukaryotic microalgae.</a> Chemosphere. 64 (1), 1-10 (2006).</li><li>Sandau, E., Sandau, P., Pulz, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heavy+metal+sorption+by+microalgae.">Heavy metal sorption by microalgae.</a> Acta Biotechnol. 16 (4), 227-235 (1996).</li><li>Amer, L., Adhikari, B., Pellegrino, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Technoeconomic+analysis+of+five+microalgae-to-biofuels+processes+of+varying+complexity.">Technoeconomic analysis of five microalgae-to-biofuels processes of varying complexity.</a> Bioresour Technol. 102 (20), 9350-9359 (2011).</li><li>Benemann, J. R., Goebel, R. P., Weissman, J. C., Augenstein, D. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microalgae+as+a+source+of+liquid+fuels.">Microalgae as a source of liquid fuels.</a> Final Technical Report, US Department of Energy, Office of Research. , (1982).</li><li>Benemann, J. R., Oswald, W. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Report+No.+DOE/PC/93204--T5+Other:+ON:+DE97052880;+TRN:+TRN.">Report No. DOE/PC/93204--T5 Other: ON: DE97052880; TRN: TRN.</a> Systems and economic analysis of microalgae ponds for conversion of CO2 to biomass. , (1996).</li><li>Chisti, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biodiesel+from+microalgae.">Biodiesel from microalgae.</a> Biotechnol Adv. 25 (3), 294-306 (2007).</li><li>Davis, R., Aden, A., Pienkos, P. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Techno-economic+analysis+of+autotrophic+microalgae+for+fuel+production.">Techno-economic analysis of autotrophic microalgae for fuel production.</a> Applied Energy. 88 (10), 3524-3531 (2011).</li><li>Jones, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Process+design+and+economics+for+the+conversion+of+algal+biomass+to+hydrocarbons:+whole+algae+hydrothermal+liquefaction+and+upgrading.">Process design and economics for the conversion of algal biomass to hydrocarbons: whole algae hydrothermal liquefaction and upgrading.</a> U.S. Department of Energy Bioenergy Technologies Office. , (2014).</li><li>Lundquist, T. J., Woertz, I. C., Quinn, N. W. T., Benemann, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+realistic+technology+and+engineering+assessment+of+algae+biofuel+production.">A realistic technology and engineering assessment of algae biofuel production.</a> Energy Biosciences Institute. , (2010).</li><li>Nagarajan, S., Chou, S. K., Cao, S., Wu, C., Zhou, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+updated+comprehensive+techno-economic+analysis+of+algae+biodiesel.">An updated comprehensive techno-economic analysis of algae biodiesel.</a> Bioresour Technol. 145, 150-156 (2011).</li><li>Pienkos, P. T., Darzins, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+promise+and+challenges+of+microalgal-derived+biofuels.">The promise and challenges of microalgal-derived biofuels.</a> Biofuels Bioproducts &amp; Biorefining-Biofpr. 3, 431-440 (2009).</li><li>Richardson, J. W., Johnson, M. D., Outlaw, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Economic+comparison+of+open+pond+raceways+to+photo+bio-reactors+for+profitable+production+of+algae+for+transportation+fuels+in+the+Southwest.">Economic comparison of open pond raceways to photo bio-reactors for profitable production of algae for transportation fuels in the Southwest.</a> Algal Research. 1 (1), 93-100 (2012).</li><li>Rogers, J. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+critical+analysis+of+paddlewheel-driven+raceway+ponds+for+algal+biofuel+production+at+commercial+scales.">A critical analysis of paddlewheel-driven raceway ponds for algal biofuel production at commercial scales.</a> Algal Research. 4, 76-88 (1016).</li><li>Sun, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+cost+analysis+of+algal+oil+production+for+biofuels.">Comparative cost analysis of algal oil production for biofuels.</a> Energy. 36 (8), 5169-5179 (2011).</li><li>Thilakaratne, R., Wright, M. M., Brown, R. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+techno-economic+analysis+of+microalgae+remnant+catalytic+pyrolysis+and+upgrading+to+fuels.">A techno-economic analysis of microalgae remnant catalytic pyrolysis and upgrading to fuels.</a> Fuel. 128, 104-112 (2014).</li><li>Quinn, J. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nannochloropsis+production+metrics+in+a+scalable+outdoor+photobioreactor+for+commercial+applications.">Nannochloropsis production metrics in a scalable outdoor photobioreactor for commercial applications.</a> Bioresour Technol. 117, 164-171 (2012).</li><li>Borkenstein, C., Knoblechner, J., Fr&#252;hwirth, H., Schagerl, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cultivation+of+Chlorella+emersonii+with+flue+gas+derived+from+a+cement+plant.">Cultivation of Chlorella emersonii with flue gas derived from a cement plant.</a> J Appl Phycol. 23 (1), 131-135 (2010).</li><li>Douskova, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+flue+gas+bioremediation+and+reduction+of+microalgal+biomass+production+costs.">Simultaneous flue gas bioremediation and reduction of microalgal biomass production costs.</a> Appl Microbiol Biotechnol. 82 (1), 179-185 (2009).</li><li>Israel, A., Gavrieli, J., Glazer, A., Friedlander, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Utilization+of+flue+gas+from+a+power+plant+for+tank+cultivation+of+the+red+seaweed+Gracilaria+cornea.">Utilization of flue gas from a power plant for tank cultivation of the red seaweed Gracilaria cornea.</a> Aquaculture. 249 (1-4), 311-316 (2012).</li><li>Napan, K., Teng, L., Quinn, J. C., Wood, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Impact of Heavy Metals from Flue Gas Integration with Microalgae Production. , (2015).</li><li>Eaton, A. D., Clesceri, L. S., Rice, E. W., Greenberg, A. E. 3. 1. 2. 5. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inductively+coupled+plasma/mass+spectrometry+(ICP/MS)+method.">Inductively coupled plasma/mass spectrometry (ICP/MS) method.</a> Standard methods for the examination of water and wastewater. , (2005).</li><li>Smith, M., Compton, J. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Matrix effects in the ICP-MS analysis of selenium in saline water samples. , (2004).</li><li>Mehta, S. K., Gaur, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+algae+for+removing+heavy+metal+ions+from+wastewater:+progress+and+prospects.">Use of algae for removing heavy metal ions from wastewater: progress and prospects.</a> Crit Rev Biotechnol. 25 (3), 113-152 (2005).</li><li>Eaton, A. D., Clesceri, L. S., Rice, E. W., Greenberg, A. E. 3. 1. 2. 0. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inductively+coupled+plasma+(ICP)+method.">Inductively coupled plasma (ICP) method.</a> Standard methods for the examination of water and wastewater. , (2005).</li></ol>

The authors declare that they have no competing financial interests.

식염수 미세 조류의 N. 살리나 성공적으로 반복 가능한 결과와 높은 바이오 매스 수율 설계 성장 시스템에서 재배 할 수있다. 공수는 7 일 성장 기간 동안 최소한의 정착 또는의 생물 연료와 잘 혼합 중지 문화 허용 혼합. 형광등 은행에서 최소한의 빛의 변화는 성장에 눈에 띄는 차이를 생산하지 표시됩니다. 이 연구는 중금속 석탄 연소 가스에 부정적인 영향을 바이오...

기존의 지상파 작물에 비해 더 높은 고유의 미세 조류는 태양 광 변환 효율 1,2- 인한 높은 생물량, 지질 및 수율을 달성하는 것으로 나타났다. 높은 생산성 속도에서 미세 조류의 배양은 외부 탄소원 등 다양한 영양소의 공급을 필요로한다. 이는 대규모 성장 설비 생산 비용을 최소화하기 위해 이러한 산업 연도 가스와 같은 산업 폐기물과 통합하고 동시에 환경 개선을 제공 할 것으로 기대된다. 산업 폐기물 탄소 기체 이산화탄소의 형태로 일반적으로 부정적인 미세 조류의 생산에 영향을 미칠 가능성이있는 오염 물질을 함유 할 수있다. 특히, 석탄 유래의 배기 가스를 포함한 다양한 오염 물질이 있지만 연소 생성물을 물과 이산화탄소뿐만 아니라 황 및 질소, 미세 먼지, 다이옥신과 퓨란 등의 유기 오염 물질의 산화물 및 무기 콘에 한정되지중금속 등 오염 물질도. 미세 조류의 생산성에 중금속으로 알려져 그들 중 일부와 무기물을 포함하여 이러한 오염 물질의 대부분의 영향은 탐구되지 않았다. 이러한 요소 중 일부는 적절한 농도의 영양분이 될 수 있지만 더 높은 농도에서 그들은 세포 기능 장애 및 사망 3를 생성 할 수 있습니다. 산업 연도 가스와 미세 조류의 통합은 직접 성장 배지 내로의 무기 오염 물질을 도입 할 가능성이있다. 석탄 기반의 배기 가스는 무기 요소 (예를 들면, CD, 공동, CR, 구리, 수은, 망간, 니켈, 납 (SB), 셀레늄, 주석, V 및 아연,로) 일부, 그 중 낮은에 다양한 농도에서의 숙박을 제공합니다 농도, 미세 조류의 성장을위한 영양분을 나타냅니다. 무기 오염 물질은 높은 친화력이 미세 조류에 결합하고 더 영양 운송을 통해 내부적으로 흡착 할 수있다. 일부 무기 오염물 (즉, CO, 구리, 아연 및 Mn)을 포함하는 효소의 일부를 형성 영양소광합성, 호흡 및 기타 기능 3,4에서 D. 그러나, 초과 금속 및 준 금속에 독성이 될 수 있습니다. 이러한 납, 카드뮴, 주석 (SB), 셀레늄로서 수은과 같은 다른 요소는 임의의 농도에서 세포의 기능을 지원하고 부정적인 배양 -3,5,6- 성장에 영향을 미칠 수있는 비 - 금속 영양소를 나타내는 알려져 있지 않다. 이러한 오염 물질의 임의의 존재는 미세 조류 세포 기능에 부정적인 영향을 생산할 수있는 잠재력을 가지고있다. 또한, 미세 조류 여러 금속의 상호 작용 성장 역학을 복잡하게하고 성장에 영향을 미칠 가능성이있다. 대규모 경제 직접 재배 시스템 7-19의 생산성에 연결되어있다. 이 질량의 99.9 및 99.4 %, 각각 20를 나타냅니다 더욱이, 개방 궤도 연못 (ORP) 또는 광 바이오 반응기 중의 미세 조류의 성장 시스템 (PBR) 중간 재활용이 중요하다. 미디어 무기 오염 물질의 존재는 궁극적으로 m을 제한 할icroalgae 생산성 인해 오염 물질 축적에 미디어의 재활용. 이 연구는 실험적으로, (CD, 공동, CR, 구리, 수은, 망간, 니켈, 납 (SB), 셀레늄, 주석, V 및 아연,로) 미세 조류 재배 시스템의 통합을 예상 농도에서 14 무기 오염 물질의 영향을 결정 석탄은 N의 생산성, 배기 가스를 유도로 살리나는 공수의 PBRS에서 성장. 이 연구에 사용 된 오염 물질은 석탄 기반의 연도 가스 그러나 생활 폐기물 기반 연도 가스, 바이오 솔리드 기반의 연도 가스, 하수, 생성 된 물, 장애인 지하수 및 해수 21-23에 존재하지 않을 것으로 나타났다. 본 연구에 사용 된 농도는 미세 조류 성장 시스템은 상업용 PBR 시스템 (20)에서 입증 흡수 효율 석탄계 CO 2 소스와 통합 된 경우 예상되는 것에 기초한다. 중금속 및 무기 오염 물질의 농도를지지 상세한 계산 Napan에 제시등. 24 분석 기술은 바이오 매스 미디어 환경에서 금속의 대부분의 분포를 이해하기 위해 사용되었다. 제시된 방법은 무기 오염 물질 스트레스와 최종 운명의 정량에서 미세 조류의 생산성 잠재력의 평가를 활성화.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td colspan="4">Chemicals</td>
		</tr>
		<tr>
			<td>Sodium chloride</td>
			<td>Fisher Scientific</td>
			<td>S271-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium chloride dihydrate</td>
			<td>Fisher Scientific</td>
			<td>C79-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium chloride</td>
			<td>Fisher Scientific</td>
			<td>P217-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium meta silicate nonahydrate&#160;</td>
			<td>Fisher Scientific</td>
			<td>S408-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnesium sulfate heptahydrate&#160;</td>
			<td>Fisher Scientific</td>
			<td>M63-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium nitrate</td>
			<td>EMD Chemical</td>
			<td>PX1520-5</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium phosphate monobasic&#160;</td>
			<td>Fisher Scientific</td>
			<td>P285-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Ammonium ferric citrate</td>
			<td>Fisher Scientific</td>
			<td>I72-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Boric acid</td>
			<td>Fisher Scientific</td>
			<td>A73-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium molybdate, dihydrate</td>
			<td>EMD Chemical</td>
			<td>SX0650-2</td>
			<td></td>
		</tr>
		<tr>
			<td>Manganese chloride tetrahydrate</td>
			<td>Fisher Scientific</td>
			<td>M87-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Zinc sulfate heptahydrate</td>
			<td>Fisher Scientific</td>
			<td>Z68-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Cupric sulfate pentahydrate</td>
			<td>Fisher Scientific</td>
			<td>C489-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Biotin&#160;</td>
			<td>Acros Organics</td>
			<td>230090010</td>
			<td></td>
		</tr>
		<tr>
			<td>Thiamine&#160;</td>
			<td>Acros Organics</td>
			<td>148990100</td>
			<td></td>
		</tr>
		<tr>
			<td>Vitamin B12&#160;</td>
			<td>Acros Organics</td>
			<td>405920010</td>
			<td></td>
		</tr>
		<tr>
			<td>Copper (II) chloride dihydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>221783-100G</td>
			<td>Irritant, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Lead (II) chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>268690-250G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Sodium dichromate dihydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>398063-100G</td>
			<td>Oxidizing, Highly Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Cobalt (II) chloride hexahydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>255599-100G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Nickel (II) chloride hexahydrate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>223387-500G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Sodium (meta) arsenite&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>71287</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Cadmium chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>202908-10G</td>
			<td>Highly Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Mercury (II) chloride&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>215465-100G</td>
			<td>Toxic, Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Tin (II) chloride dihydrate</td>
			<td>Fisher Scientific</td>
			<td>T142-500</td>
			<td>Corrosive. Suitable for Hg analysis. Very hazardous.</td>
		</tr>
		<tr>
			<td>Manganese chloride tetrahydrate</td>
			<td>Fisher Scientific</td>
			<td>M87-500</td>
			<td></td>
		</tr>
		<tr>
			<td>Vanadium (V) oxide</td>
			<td>Acros Organics</td>
			<td>206422500</td>
			<td>Dangerous to the Environment</td>
		</tr>
		<tr>
			<td>Carbon dioxide&#160;</td>
			<td>Air Liquide</td>
			<td>I2301S-1</td>
			<td>Compressed</td>
		</tr>
		<tr>
			<td>Hydrogen peroxide</td>
			<td>H325-500</td>
			<td>Fisher Scientific</td>
			<td>30% in water</td>
		</tr>
		<tr>
			<td>ICP-MS standard</td>
			<td>ICP-MS-6020</td>
			<td>High Purity Standards</td>
			<td></td>
		</tr>
		<tr>
			<td>Mercury standard</td>
			<td>CGHG1-1</td>
			<td>Inorganic Ventures</td>
			<td>1000&#177;6 &#181;g/mL in 5% nitric acid</td>
		</tr>
		<tr>
			<td>Argon</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed</td>
		</tr>
		<tr>
			<td>Helium</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed, ultra high purity</td>
		</tr>
		<tr>
			<td>Hydrogen</td>
			<td>Air Liquide</td>
			<td></td>
			<td>Compressed, ultra high purity</td>
		</tr>
		<tr>
			<td>Nitric acid</td>
			<td>Fisher Scientific</td>
			<td>A509-P212</td>
			<td>67-70% nitric acid, trace metal grade. Caution: manipulate under fume hood.</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Fisher Scientific</td>
			<td>A508-P212</td>
			<td>35% hydrochloric acid, trace metal grade. Caution: manipulate under fume hood.</td>
		</tr>
		<tr>
			<td colspan="4">Equipment</td>
		</tr>
		<tr>
			<td>Scientific prevacuum sterilizer</td>
			<td>Steris</td>
			<td>31626A</td>
			<td>SV-120</td>
		</tr>
		<tr>
			<td>Centrifuge</td>
			<td>Thermo Fisher</td>
			<td>46910</td>
			<td>RC-6 Plus</td>
		</tr>
		<tr>
			<td>Spectrophotometer</td>
			<td>Shimadzu</td>
			<td>1867</td>
			<td>UV-1800</td>
		</tr>
		<tr>
			<td>pH controller</td>
			<td>Hanna</td>
			<td>BL981411</td>
			<td>X4</td>
		</tr>
		<tr>
			<td>Rotometer, X5</td>
			<td>Dwyer</td>
			<td>RMA-151-SSV</td>
			<td>T31Y</td>
		</tr>
		<tr>
			<td>Rotometer, X5</td>
			<td>Dwyer</td>
			<td>RMA-26-SSV</td>
			<td>T35Y</td>
		</tr>
		<tr>
			<td>Water bath circulator</td>
			<td>Fisher Scientific</td>
			<td>13-873-45A</td>
			<td></td>
		</tr>
		<tr>
			<td>Compact chiller</td>
			<td>VWR</td>
			<td>13270-120</td>
			<td></td>
		</tr>
		<tr>
			<td>Freeze dryer</td>
			<td>Labconco</td>
			<td>7752020</td>
			<td></td>
		</tr>
		<tr>
			<td>Stir plate</td>
			<td>Fisher Scientific</td>
			<td>11-100-49S</td>
			<td></td>
		</tr>
		<tr>
			<td>pH lab electrode</td>
			<td>Phidgets Inc</td>
			<td>3550</td>
			<td></td>
		</tr>
		<tr>
			<td>Inductively coupled plasma mass spectrometer</td>
			<td>Agilent Technologies</td>
			<td>7700 Series ICP-MS</td>
			<td>Attached to autosampler CETAC ASX-520</td>
		</tr>
		<tr>
			<td>FIAS 100</td>
			<td>Perkin Elmer Instruments</td>
			<td>B0506520</td>
			<td></td>
		</tr>
		<tr>
			<td>Atomic absorption spectrometer</td>
			<td>Perkin Elmer Instruments</td>
			<td>AAnalyst 800</td>
			<td></td>
		</tr>
		<tr>
			<td>Cell heater (quartz)</td>
			<td>Perkin Elmer Instruments</td>
			<td>B3120397</td>
			<td></td>
		</tr>
		<tr>
			<td>Microwave</td>
			<td>Milestone</td>
			<td></td>
			<td>Programmable, maximum power 1200 W</td>
		</tr>
		<tr>
			<td>Microwave rotor</td>
			<td>Milestone</td>
			<td></td>
			<td>Rotor with 24 75 mL Teflon vessels for closed-vessel microwave assisted digestion.</td>
		</tr>
		<tr>
			<td colspan="4">Materials</td>
		</tr>
		<tr>
			<td>0.2 micron syringe filter</td>
			<td>Whatman</td>
			<td>6713-0425</td>
			<td></td>
		</tr>
		<tr>
			<td>0.2 micron syringe filter</td>
			<td>Whatman</td>
			<td>6713-1650</td>
			<td></td>
		</tr>
		<tr>
			<td>0.45 micron syringe filter</td>
			<td>Thermo Fisher</td>
			<td>F2500-3</td>
			<td></td>
		</tr>
		<tr>
			<td>Polystyrene tubes</td>
			<td>Evergreen</td>
			<td>222-2094-050</td>
			<td>17x100 mm w/cap, 16 mL, polysteryne</td>
		</tr>
		<tr>
			<td>Octogonal magnetic&#160;stir&#160;bars</td>
			<td>Fisher scientific</td>
			<td>14-513-60</td>
			<td>Magnets encased in PTFE fluoropolymer</td>
		</tr>
	</tbody>
</table>

quantification of heavy metals and other inorganic contaminants on the productivity of microalgae

재생 연료에 대한 수요의 증가와 같은 미세 조류 등의 대체 원료의 가능성을 조사하는 연구가있다. 고유의 장점은 폐기물 높은 잠재적 인 수율, 비 경작지의 사용 및 통합을 포함한다. 미세 조류 대량 생산 시스템의 영양 요구는 배기 가스와 폐수로부터 영양분 이산화탄소 등의 산업 폐기물 자원으로 재배 시스템의 결합을 필요로 할 것이다. 이 폐기물에 존재하는 무기 오염 물질은 잠재적으로 부정적인 생산성과 제한 최종 사용에 영향을 미칠 미세 조류 바이오 매스의 생물 축적으로 이어질 수 있습니다. 이 연구는 충격의 실험 평가 및 Nannochloropsis의 살리나 성장에 14 무기 오염 물질 (AS, CD, 공동, CR, 구리, 수은, 망간, 니켈, 납 (SB), 셀레늄, 주석, V 및 아연)의 운명에 초점을 맞추고 . 미세 조류는 성장 M에서의 pH 7에서 984 μmol m -2 초에 조명 광 바이오 반응기에서 재배 -1 유지되었다수준의 무기 오염 물질로 오염 edia 상업적 석탄 연소 가스 시스템으로 볼 조성물을 기준으로 예상했다. 바이오 매스와 7 일간 성장 기간 말 매질에 존재 오염 분석적, 수은과 같이, CD 공동 CR, 구리, 망간, 니켈을위한 유도 결합 플라즈마 질량 분석을 통해 차가운​​ 증기를 원자 흡광 법으로 정량 하였다 납 (SB), 셀레늄, 주석, V 및 아연. 결과는 N.을 보여 살리나 이러한 오염물 도입 yieldwith 생물량 통계적 감소에 다중 금속 환경에 민감한 균주이다. 여기에 제시된 기술은 조류 성장을 정량화 및 무기 오염 물질의 운명을 결정하기에 적합.

바이오 매스 수율 N의 생산 살리나 본 연구에 사용한 PBR 시스템에서 8.5까지 1g / L -1에서 ± 0.19 g / L-1 (N = 12) 대조군 반응기 및 4.0 ± 0.3 g / ℓ -1 (N = 12)을 성장 다중 금속은 7 일 오염. 실험은 세중 원자로 및 여러 배치에 걸쳐 반복 데이터를 생산. 그림 2A는 3 개의 독립적 인 PBRS에서 샘플링을 기반으로 매우 작은 표준 오차와 평?...

Watch this Scientific Journal Video about Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae at JoVE.com

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae

Integration of microalgal cultivation with industrial flue gas will ultimately introduce heavy metals and other inorganic compounds into the growth media. This study presents a procedure used to determine the end fate and impact of heavy metals and inorganic contaminants on the growth of Nannochloropsis salina grown in photobioreactors.

중금속과 미세 조류의 생산성에 다른 무기 오염 물질의 정량화

Increasing demand for renewable fuels has researchers investigating the feasibility of alternative feedstocks, such as microalgae. Inherent advantages ...

quantification-heavy-metals-other-inorganic-contaminants-on

Research

JoVE Journal

Environment

15.8K 조회수.  Utah State University. Integration of microalgal cultivation with industrial flue gas will ultimately introduce heavy metals and other inorganic compounds into the growth media. This study presents a procedure used to determine the end fate and impact of heavy metals and inorganic contaminants on the growth of Nannochloropsis salina grown in photobioreactors.

비디오: Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae

Analysis of Fatty Acid Content and Composition in Microalgae

A method to determine the content and composition of total fatty acids present in microalgae is described. Fatty acids are a major constituent of microalgal biomass. These fatty acids can be present in different acyl-lipid classes. Especially the fatty acids present in triacylglycerol (TAG) are of commercial interest, because they can be used for production of transportation fuels, bulk chemicals, nutraceuticals (&omega;-3 fatty acids), and food commodities. To develop commercial applications, reliable analytical methods for quantification of fatty acid content and composition are needed. Microalgae are single cells surrounded by a rigid cell wall. A fatty acid analysis method should provide sufficient cell disruption to liberate all acyl lipids and the extraction procedure used should be able to extract all acyl lipid classes.
With the method presented here all fatty acids present in microalgae can be accurately and reproducibly identified and quantified using small amounts of sample (5 mg) independent of their chain length, degree of unsaturation, or the lipid class they are part of.
This method does not provide information about the relative abundance of different lipid classes, but can be extended to separate lipid classes from each other.
The method is based on a sequence of mechanical cell disruption, solvent based lipid extraction, transesterification of fatty acids to fatty acid methyl esters (FAMEs), and quantification and identification of FAMEs using gas chromatography (GC-FID). A TAG internal standard (tripentadecanoin) is added prior to the analytical procedure to correct for losses during extraction and incomplete transesterification.

A method for the determination of fatty acid content and composition in microalgae based on mechanical cell disruption, solvent based lipid extraction, transesterification, and quantification and identification of fatty acids using gas chromatography is described. A tripentadecanoin internal standard is used to compensate for the possible losses during extraction and incomplete transesterification.

미세 조류의 지방산 콘텐츠 및 조성 분석

A method to determine the content and composition of total fatty acids present in microalgae is described. Fatty acids are a major constituent of ...

연구

환경과학

A Whole Cell Bioreporter Approach to Assess Transport and Bioavailability of Organic Contaminants in Water Unsaturated Systems

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is not an appropriate measure for its availability; bioavailability rather depends on the dynamic interplay of potential mass transfer (flux) of a compound to a microbial cell and the capacity of the latter to degrade the compound. In water-unsaturated parts of the soil, mycelia have been shown to overcome bioavailability limitations by actively transporting and mobilizing organic compounds over the range of centimeters. Whereas the extent of mycelia-based transport can be quantified easily by chemical means, verification of the contaminant-bioavailability to bacterial cells requires a biological method. Addressing this constraint, we chose the PAH fluorene (FLU) as a model compound and developed a water unsaturated model microcosm linking a spatially separated FLU point source and the FLU degrading bioreporter bacterium Burkholderia sartisoli RP037-mChe by a mycelial network of Pythium ultimum. Since the bioreporter expresses eGFP in response of the PAH flux to the cell, bacterial FLU exposure and degradation could be monitored directly in the microcosms via confocal laser scanning microscopy (CLSM). CLSM and image analyses revealed a significant increase of the eGFP expression in the presence of P. ultimum compared to controls without mycelia or FLU thus indicating FLU bioavailability to bacteria after mycelia-mediated transport. CLSM results were supported by chemical analyses in identical microcosms. The developed microcosm proved suitable to investigate contaminant bioavailability and to concomitantly visualize the involved bacteria-mycelial interactions.

A whole cell bioreporter assay with Burkholderia sartisoli RP037-mChe was developed to detect fractions of an organic contaminant (i.e., fluorene) available for bacterial degradation after active transport by mycelia bridging air-filled pores in a water unsaturated model system.

전체 셀 Bioreporter 접근 물 불포화 시스템에서 유기 오염 물질의 운송과 생체 이용률을 평가하기 위해

Bioavailability of contaminants is a prerequisite for their effective biodegradation in soil. The average bulk concentration of a contaminant, however, is ...

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including Pristionchus pacificus display complex behaviors, the most striking of which is the predation of other nematode larvae. However, as these behaviors are absent in the model organism Caenorhabditis elegans, they have thus far only recently been described in detail along with the development of reliable behavioral assays 1. These predatory behaviors are dependent upon phenotypically plastic but fixed mouth morphs making the correct identification and categorization of these animals essential. In P. pacificus there are two mouth types, the stenostomatous and eurystomatous morphs 2, with only the wide mouthed eurystomatous containing an extra tooth and being capable of killing other nematode larvae. Through the isolation of an abundance of size matched prey larvae and subsequent exposure to predatory nematodes, assays including both "corpse assays" and "bite assays" on correctly identified mouth morph nematodes are possible. These assays provide a means to rapidly quantify predation success rates and provide a detailed behavioral analysis of individual nematodes engaged in predatory feeding activities. In addition, with the use of a high-speed camera, visualization of changes in pharyngeal activity including tooth and pumping dynamics are also possible.

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

Behavioral assays provide powerful tools for understanding neuronal function. Here we present several protocols for quantifying predatory feeding behavior found in the model nematode Pristionchus pacificus and its relatives. Additionally, we provide methods for analyzing predatory feeding adaptations including mouth structures and teeth.

에서 약탈 먹이 행동을 분석<em&gt; Pristionchus</em&gt; 및 기타 선충

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including ...

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food webs. Toxicity testing based on microorganisms are widely used because they are relatively quick, reproducible, cheap, and are not associated with ethical issues. Here, we describe an ecotoxicological method to evaluate the biological response of the marine bacterium Vibrio anguillarum. This method assesses the acute toxicity of chemical compounds, including new contaminants such as nanoparticles, as well as environmental samples. The endpoint is the reduction of bacterial culturability (i.e., the capability to replicate and form colonies) due to exposure to a toxicant. This reduction can be generally referred to as mortality. The test allows for the determination of the LC50, the concentration that causes a 50% decrease of bacteria actively replicating and forming colonies, after a 6 h exposure. The culturable bacteria are counted in terms of colony forming units (CFU), and the &#34;mortality&#34; is evaluated and compared to the control. In this work, the toxicity of copper sulphate (CuSO4) was evaluated. A clear dose-response relationship was observed, with a mean LC50 of 1.13 mg/L, after three independent tests. This protocol, compared to existing methods with microorganisms, is applicable in a wider range of salinity and has no limitations for colored/turbid samples. It uses saline solution as the exposure medium, avoiding any possible interferences of growth medium with the investigated contaminants. The LC50 calculation facilitates comparisons with other bioassays commonly applied to ecotoxicological assessments of the marine environment.

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

This work describes a new protocol to assess the ecotoxicity of pollutants, including emerging contaminants such as nanomaterials, using the marine bacterium Vibrio anguillarum. This method allows for the determination of the LC50, or mortality, the concentration that causes a 50% decrease in bacteria culturability, after a 6 h exposure.

해양 박테리아와 생태 독성 학적 방법<em&gt; 비브리오 앵 귈라 룸</em&gt; 환경 오염 물질의 급성 독성 평가

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food ...

Preparation of DMMTAV and DMDTAV Using DMAV for Environmental Applications: Synthesis, Purification, and Confirmation

Dimethylated thioarsenicals such as dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV), which are produced by the metabolic pathway of dimethylarsinic acid (DMAV) thiolation, have been recently found in the environment as well as human organs. DMMTAV and DMDTAV can be quantified to determine the ecological effects of dimethylated thioarsenicals and their stability in environmental media. The synthesis method for these compounds is unstandardized, making replicating previous studies challenging. Furthermore, there is a lack of information about storage techniques, including storage of compounds without species transformation. Moreover, because only limited information about synthesis methods is available, there may be experimental difficulties in synthesizing standard chemicals and performing quantitative analysis. The protocol presented herein provides a practically modified synthesis method for the dimethylated thioarsenicals, DMMTAV and DMDTAV, and will help in the quantification of species separation analysis using high performance liquid chromatography in conjunction with inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The experimental steps of this procedure were modified by focusing on the preparation of chemical reagents, filtration methods, and storage.

Preparation of DMMTAV and DMDTAV Using DMAV for Environmental Applications: Synthesis, Purification, and Confirmation

This article presents modified experimental protocols for dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV) synthesis, inducing dimethylarsinic acid (DMAV) thiolation through mixing of DMAV, Na2S, and H2SO4. The modified protocol provides an experimental guideline, thereby overcoming limitations of the synthesis steps that could have caused experimental failures in quantitative analysis.

DMMTAV 및 환경 응용 프로그램에 대 한 DMAV 를 사용 하 여 DMDTAV 의 준비: 합성, 정화, 및 확인

Dimethylated thioarsenicals such as dimethylmonothioarsinic acid (DMMTAV) and dimethyldithioarsinic acid (DMDTAV), which are produced by the metabolic ...

Harvesting Venom Toxins from Assassin Bugs and Other Heteropteran Insects

Heteropteran insects such as assassin bugs (Reduviidae) and giant water bugs (Belostomatidae) descended from a common predaceous and venomous ancestor, and the majority of extant heteropterans retain this trophic strategy. Some heteropterans have transitioned to feeding on vertebrate blood (such as the kissing bugs, Triatominae; and bed bugs, Cimicidae) while others have reverted to feeding on plants (most Pentatomomorpha). However, with the exception of saliva used by kissing bugs to facilitate blood-feeding, little is known about heteropteran venoms compared to the venoms of spiders, scorpions and snakes.
One obstacle to the characterization of heteropteran venom toxins is the structure and function of the venom/labial glands, which are both morphologically complex and perform multiple biological roles (defense, prey capture, and extra-oral digestion). In this article, we describe three methods we have successfully used to collect heteropteran venoms. First, we present electrostimulation as a convenient way to collect venom that is often lethal when injected into prey animals, and which obviates contamination by glandular tissue. Second, we show that gentle harassment of animals is sufficient to produce venom extrusion from the proboscis and/or venom spitting in some groups of heteropterans. Third, we describe methods to harvest venom toxins by dissection of anaesthetized animals to obtain the venom glands. This method is complementary to other methods, as it may allow harvesting of toxins from taxa in which electrostimulation and harassment are ineffective. These protocols will enable researchers to harvest toxins from heteropteran insects for structure-function characterization and possible applications in medicine and agriculture.

Although many insects in the suborder Heteroptera (Insecta: Hemiptera) are venomous, their venom composition and the functions of their venom toxins are mostly unknown. This protocol describes methods to harvest heteropteran venoms for further characterization, using electrostimulation, harassment, and gland dissection.

독 독 소 암살자 버그와 다른 Heteropteran 곤충에서 수확

Heteropteran insects such as assassin bugs (Reduviidae) and giant water bugs (Belostomatidae) descended from a common predaceous and venomous ancestor, ...

Evaluation of the Productivity of Social Wasp Colonies (Vespinae) and an Introduction to the Traditional Japanese Vespula Wasp Hunting Technique

For vespine wasps, colony productivity is typically estimated by counting the number of larval cells. This paper presents an improved method that enables researchers to estimate more accurately the number of adults produced, counting the number of meconia (the stools left in the cells by wasp larvae when pupating into adults, per 100 cells) in each comb. This method can be applied before or after colony collapse (i.e., in active or inactive nests). The paper also describes how to locate wild Vespula wasp colonies by &#34;flagging&#34; wasp baits and chasing the wasp collecting them, using a method traditionally performed by local people in central Japan (as illustrated in the associated video). The Vespula chasing method described has several advantages: it is easy to reinitiate the chase from a point where the forager flying back to the nest was lost, and it is easy to pinpoint the nest location as marked wasps often lose their flag at the nest entrance. These methods for estimating colony productivity and collecting nests can be valuable for researchers studying social wasps.

Evaluation of the Productivity of Social Wasp Colonies Vespinae and an Introduction to the Traditional Japanese Vespula Wasp Hunting Technique

This methodological paper evaluates the productivity of a social wasp colony by examining the number of meconia per 100 cells of comb, to estimate the total number of adults the wasps produced. The associated video describes how to search for Vespula wasp nests, a method developed by amateur wasp chasers.

사회 말스박 식민지의 생산성 평가 (베스피나) 및 전통적인 일본 베스풀라 말스프 사냥 기술 소개

For vespine wasps, colony productivity is typically estimated by counting the number of larval cells. This paper presents an improved method that enables ...

Cultivation of Green Microalgae in Bubble Column Photobioreactors and an Assay for Neutral Lipids

There is significant interest in the study of microalgae for engineering applications such as the production of biofuels, high value products, and for the treatment of wastes. As most new research efforts begin at laboratory scale, there is a need for cost-effective methods for culturing microalgae in a reproducible manner. Here, we communicate an effective approach to culture microalgae in laboratory-scale photobioreactors, and to measure the growth and neutral lipid content of that algae. Instructions are also included on how to set up the photobioreactor system. Although the example organisms are species of Chlorella and Auxenochlorella, this system can be adapted to cultivate a wide range of microalgae, including co-cultures of algae with non-algae species. Stock cultures are first grown in bottles to produce inoculum for the photobioreactor system. Algae inoculum is concentrated and transferred to photobioreactors for cultivation in batch mode. Samples are collected daily for the optical density readings. At the end of the batch culture, cells are harvested by centrifuge, washed, and freeze dried to obtain a final dry weight concentration. The final dry weight concentration is used to create a correlation between the optical density and the dry weight concentration. A modified Folch method is subsequently used to extract total lipids from the freeze-dried biomass and the extract is assayed for its neutral lipid content using a microplate assay. This assay has been published previously but protocol steps were included here to highlight critical steps in the procedure where errors frequently occur. The bioreactor system described here fills a niche between simple flask cultivation and fully-controlled commercial bioreactors. Even with only 3-4 biological replicates per treatment, our approach to culturing algae leads to tight standard deviations in the growth and lipid assays.

Here, we present a protocol to construct lab-scale bubble column photobioreactors and use them to culture microalgae. It also provides a method for the determination of the culture growth rate and neutral lipid content.

중립 지질에 대 한 녹색 미세 거품 열 Photobioreactors에 시험 재배

There is significant interest in the study of microalgae for engineering applications such as the production of biofuels, high value products, and for the ...

Microalgae Cultivation and Biomass Quantification in a Bench-Scale Photobioreactor with Corrosive Flue Gases

Photobioreactors are illuminated cultivation systems for experiments on phototrophic microorganisms. These systems provide a sterile environment for microalgal cultivation with temperature, pH, and gas composition and flow rate control. At bench-scale, photobioreactors are advantageous to researchers studying microalgal properties, productivity, and growth optimization. At industrial scales, photobioreactors can maintain product purity and improve production efficiency. The video describes the preparation and use of a bench-scale photobioreactor for microalgal cultivation, including the safe use of corrosive gas inputs, and details relevant biomass measurements and biomass productivity calculations. Specifically, the video illustrates microalgal culture storage and preparation for inoculation, photobioreactor assembly and sterilization, biomass concentration measurements, and a logistic model for microalgal biomass productivity with rate calculations including maximum and overall biomass productivities. Additionally, since there is growing interest in experiments to cultivate microalgae using simulated or real waste gas emissions, the video will cover the photobioreactor equipment adaptations necessary to work with corrosive gases and discuss safe sampling in such scenarios.

Bench-scale, axenic cultivation facilitates microalgal characterization and productivity optimization before subsequent process scale-up. Photobioreactors provide the necessary control for reliable and reproducible microalgal experiments and can be adapted to safely cultivate microalgae with the corrosive gases (CO2, SO2, NO2) from municipal or industrial combustion emissions.

부식성 연도 가스가 있는 벤치 스케일 광생물반응기에서 미세조류 재배 및 바이오매스 정량화

Photobioreactors are illuminated cultivation systems for experiments on phototrophic microorganisms. These systems provide a sterile environment for ...

Two-Dimensional Visualization and Quantification of Labile, Inorganic Plant Nutrients and Contaminants in Soil

We describe a method for two-dimensional (2D) visualization and quantification of the distribution of labile (i.e., reversibly adsorbed) inorganic nutrient (e.g., P, Fe, Mn) and contaminant (e.g., As, Cd, Pb) solute species in the soil adjacent to plant roots (the &#8216;rhizosphere&#8217;) at sub-millimeter (~100 &#181;m) spatial resolution. The method combines sink-based solute sampling by the diffusive gradients in thin films (DGT) technique with spatially resolved chemical analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The DGT technique is based on thin hydrogels with homogeneously distributed analyte-selective binding phases. The variety of available binding phases allows for the preparation of different DGT gel types following simple gel fabrication procedures. For DGT gel deployment in the rhizosphere, plants are grown in flat, transparent growth containers (rhizotrons), which enable minimal invasive access to a soil-grown root system. After a pre-growth period, DGT gels are applied to selected regions of interest for in situ solute sampling in the rhizosphere. Afterwards, DGT gels are retrieved and prepared for subsequent chemical analysis of the bound solutes using LA-ICP-MS line-scan imaging. Application of internal normalization using 13C and external calibration using matrix-matched gel standards further allows for the quantification of the 2D solute fluxes. This method is unique in its capability to generate quantitative, sub-mm scale 2D images of multi-element solute fluxes in soil-plant environments, exceeding the achievable spatial resolution of other methods for measuring solute gradients in the rhizosphere substantially. We present the application and evaluation of the method for imaging multiple cationic and anionic solute species in the rhizosphere of terrestrial plants and highlight the possibility of combining this method with complementary solute imaging techniques.

This protocol presents a workflow for sub-mm 2D visualization of multiple labile inorganic nutrient and contaminant solute species using diffusive gradients in thin films (DGT) combined with mass spectrometry imaging. Solute sampling and high-resolution chemical analysis are described in detail for quantitative mapping of solutes in the rhizosphere of terrestrial plants.